Skip to Content

15,665 Results Found

  • Article
  • Open Access
14 Citations
3,476 Views
13 Pages

1 July 2021

We often use the plastics daily, containing of polyethylene plastic polymers which recently can be utilized as additional material for road pavements. Several studies have attempted to find the optimum proportion of an asphalt mixture using modified...

(This article belongs to the Special Issue Advanced Support Technologies in Roadway)
  • Article
  • Open Access
33 Citations
5,106 Views
21 Pages

Combined Response Surface Method and Modified Differential Evolution for Parameter Optimization of Friction Stir Welding

  • Thanatkij Srichok,
  • Rapeepan Pitakaso,
  • Kanchana Sethanan,
  • Worapot Sirirak and
  • Parama Kwangmuang

1 September 2020

In this study, we constructed a new algorithm to determine the optimal parameters for friction stir welding including rotational speed, welding speed, axial force, tool pin profile, and tool material. The objective of welding is to maximize the ultim...

(This article belongs to the Section AI-Enabled Process Engineering)
  • Article
  • Open Access
12 Citations
3,799 Views
13 Pages

Dental Implants with a Calcium Ions-Modified Surface and Platelet Concentrates for the Rehabilitation of Medically Compromised Patients: A Retrospective Study with 5-Year Follow-Up

  • Marco Mozzati,
  • Giorgia Gallesio,
  • Giulio Menicucci,
  • Carlo Manzella and ,
  • Margherita Tumedei and
  • Massimo Del Fabbro
  • + 1 author+ 0 author

21 May 2021

Background: Platelet concentrates are biological, autologous products obtained from the patient’s whole blood, consisting of a supraphysiological concentration of platelets and growth factors, that have proved beneficial in different applications in...

(This article belongs to the Special Issue Dental Implant Biomaterials: In Vitro and In Vivo Simulations and Applications)
  • Article
  • Open Access
6 Citations
7,596 Views
14 Pages

Assessment of Dental Implants with Modified Calcium-Phosphate Surface in a Multicenter, Prospective, Non-Interventional Study: Results up to 50 Months of Follow-Up

  • Carles Subirà-Pifarré,
  • Cristina Masuet-Aumatell,
  • Carlos Rodado Alonso,
  • Ricardo Medina Madrid and
  • Cosimo Galletti

Prescription of implant treatments is very widespread at present, mainly due to the low rate of annual loss and, to date, few studies have assessed their survival in the routine clinical practice of dentistry. The purpose of this observational study...

  • Article
  • Open Access
3 Citations
901 Views
22 Pages

7 December 2025

High-friction surface treatments (HFSTs) are widely applied to improve pavement safety by enhancing long-term skid resistance. Although epoxy resins are commonly used due to their strength and durability, their high cost, susceptibility to delaminati...

(This article belongs to the Special Issue Strategies for Improving the Sustainability of Asphalt Pavements)
  • Article
  • Open Access
13 Citations
3,456 Views
14 Pages

A Study of the Adsorption and Removal of Sb(III) from Aqueous Solution by Fe(III) Modified Proteus cibarius with Mechanistic Insights Using Response Surface Methodology

  • Xiaojian Li,
  • Renjian Deng,
  • Zhie Tang,
  • Saijun Zhou and ,
  • Xing Zeng,
  • Jianqun Wang and
  • Andrew Hursthouse
  • + 2 authors+ 0 author

26 May 2021

Environmental pollution caused by excessive Sb(III) in the water environment is a global issue. We investigated the effect of processing parameters, their interaction and mechanistic details for the removal of Sb(III) using an iron salt-modified bios...

(This article belongs to the Special Issue Novel Adsorbent for Environmental Remediation)
  • Article
  • Open Access
4 Citations
2,291 Views
11 Pages

12 March 2025

Surface and interface engineering play a crucial role in enhancing the CO2 methanation performance of heterogeneous catalysts. In this study, we present NiO-TiO2 nanoparticles modified with oxygen vacancy-rich Fe3O4 clusters, significantly improving...

(This article belongs to the Special Issue Synthesis, Application and Structural Analysis of Composite Materials)
  • Article
  • Open Access
41 Citations
6,421 Views
22 Pages

Retrieving Surface Soil Moisture over Wheat and Soybean Fields during Growing Season Using Modified Water Cloud Model from Radarsat-2 SAR Data

  • Minfeng Xing,
  • Binbin He,
  • Xiliang Ni,
  • Jinfei Wang and ,
  • Gangqiang An,
  • Jiali Shang and
  • Xiaodong Huang
  • + 2 authors+ 0 author

20 August 2019

Surface soil moisture (SSM) retrieval over agricultural fields using synthetic aperture radar (SAR) data is often obstructed by the vegetation effects on the backscattering during the growing season. This paper reports the retrieval of SSM from RADAR...

(This article belongs to the Special Issue Soil Moisture Retrieval using Radar Remote Sensing Sensors)
  • Article
  • Open Access
3 Citations
2,416 Views
11 Pages

20 November 2022

In this study, a fluorine-containing flow modifier (Si-DF) with low surface energy is successfully synthesized, which is applied to fabricate ideal electronic packaging materials (BN/PPS composites) with high thermal conductivity, excellent dielectri...

(This article belongs to the Special Issue Synthesis, Characterization and Application of Polymer-Based Materials)
  • Article
  • Open Access
19 Citations
4,898 Views
15 Pages

Rheological Properties, Surface Microhardness, and Dentin Shear Bond Strength of Resin-Modified Glass Ionomer Cements Containing Methacrylate-Functionalized Polyacids and Spherical Pre-Reacted Glass Fillers

  • Whithipa Thepveera,
  • Wisitsin Potiprapanpong,
  • Arnit Toneluck,
  • Somruethai Channasanon and ,
  • Chutikarn Khamsuk,
  • Naruporn Monmaturapoj,
  • Siriporn Tanodekaew and
  • Piyaphong Panpisut
  • + 3 authors+ 0 author

The aim of this study was to prepare experimental resin-modified glass ionomer cements (RMGICs) containing low levels of hydroxyethyl methacrylate (HEMA) for pulp protection. Liquid and powder phases of the experimental RMGICs were polyacid functiona...

  • Article
  • Open Access
355 Views
19 Pages

26 August 2026

Binder bonding strength (BBS) is critical to aggregate retention and friction performance in high-friction surface treatment (HFST). Although epoxy resin is traditionally used, asphalt-based binders offer a sustainable alternative; however, their bon...

(This article belongs to the Special Issue Development of Sustainable Asphalt Materials)
  • Article
  • Open Access
4 Citations
6,065 Views
25 Pages

3 March 2022

The developing world has been faced with high rates of unemployment, exacerbated by extended enforced lockdowns due to the pandemic. Pressure is mounting for drastic intervention to accelerate economic growth and to provide employment opportunities....

(This article belongs to the Special Issue Nanomaterials and Other Additives to Enhance Asphalt Pavement Performance)
  • Article
  • Open Access
46 Citations
4,812 Views
24 Pages

ZnO Structures with Surface Nanoscale Interfaces Formed by Au, Fe2O3, or Cu2O Modifier Nanoparticles: Characterization and Gas Sensing Properties

  • Milena Tomić,
  • Martha Claros,
  • Isabel Gràcia,
  • Eduard Figueras and ,
  • Carles Cané and
  • Stella Vallejos
  • + 1 author+ 0 author

30 June 2021

Zinc oxide rod structures are synthetized and subsequently modified with Au, Fe2O3, or Cu2O to form nanoscale interfaces at the rod surface. X-ray photoelectron spectroscopy corroborates the presence of Fe in the form of oxide—Fe2O3; Cu in the form o...

(This article belongs to the Section Chemical Sensors)
  • Review
  • Open Access
15 Citations
4,888 Views
41 Pages

Surface Modifiers on Composite Particles for Direct Compaction

  • Fu-Cai Chen,
  • Wen-Jun Liu,
  • Wei-Feng Zhu,
  • Ling-Yu Yang and ,
  • Ji-Wen Zhang,
  • Yi Feng,
  • Liang-Shan Ming and
  • Zhe Li
  • + 3 authors+ 0 author

Direct compaction (DC) is considered to be the most effective method of tablet production. However, only a small number of the active pharmaceutical ingredients (APIs) can be successfully manufactured into tablets using DC since most APIs lack adequa...

  • Article
  • Open Access
24 Citations
5,539 Views
11 Pages

Study on Interfacial Surface in Modified Spray Tower

  • Marek Ochowiak,
  • Sylwia Włodarczak,
  • Ivan Pavlenko,
  • Daniel Janecki and ,
  • Andżelika Krupińska and
  • Małgorzata Markowska
  • + 1 author+ 0 author

13 August 2019

This paper presents an analysis of the changes in interfacial surface and the size of droplets formed in a spray tower. The interfacial surface and the size of droplets formed are of fundamental importance to the performance of the equipment, both in...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
665 Views
15 Pages

Chronic ankle instability (CAI) is associated with impaired sensorimotor function and dynamic postural control; however, reach distance alone may not fully capture task-specific neuromuscular strategies during functional balance tasks. This prelimina...

(This article belongs to the Special Issue Electromyography Techniques for Motion Analysis)
  • Article
  • Open Access
8 Citations
7,581 Views
14 Pages

4 March 2017

Fluoroalkyl end-capped vinyltrimethoxysilane oligomeric silica/alkyl-modified cellulose (AM-Cellu) nanocomposites [RF-(CH2-CHSiO2)n-RF/AM-Cellu; n = 2, 3; RF = CF(CF3)OC3F7] were prepared by the sol-gel reactions of the corresponding oligomer [RF-(CH...

(This article belongs to the Special Issue Polymer Blends 2017)
  • Article
  • Open Access
905 Views
28 Pages

21 May 2026

A novel macromolecular photoinitiator (MPI) was synthesized from a copolymer of maleic anhydride and methyl methacrylate and subsequently functionalized with 3-hydroxy-2-methoxy-1,2-diphenylpropan-1-one moieties via a polymer-analogous acylation reac...

(This article belongs to the Section Polymer Chemistry)
  • Review
  • Open Access
35 Citations
8,200 Views
17 Pages

6 March 2023

Pencil graphite electrode (PGE) is an alternative, commercially available, ready-to-use, screen-printed electrode for a wide range of electroanalytical applications. Due to the complex-matrix composition and unpredictable electro-inactive nature of P...

(This article belongs to the Section Biosensors and Healthcare)
  • Review
  • Open Access
11 Citations
3,536 Views
28 Pages

Since the first observations of biofilm formation by microorganisms on various surfaces more than 50 years ago, it has been shown that most “unicellular” microorganisms prefer to grow in multicellular communities that often adhere to surf...

(This article belongs to the Section Biological Factors)
  • Article
  • Open Access
12 Citations
4,119 Views
15 Pages

Study of a Modified Time Hardening Model for the Creep Consolidation Effect of Asphalt Mixtures

  • Yunming Ma,
  • Hongchang Wang,
  • Kang Zhao,
  • Lizhu Yan and
  • Dagang Yang

7 April 2022

In the past, most researchers have explained the three-stage creep behavior of asphalt mixture in detail. Still, there is no reasonable model to describe the creep of the consolidation effect. To accurately describe the consolidation effect of an asp...

(This article belongs to the Special Issue Sustainability in Construction and Building Materials)
  • Article
  • Open Access
2,471 Views
20 Pages

Etching and Precursor Effects on Plasma-Modified Waste Polyethylene Terephthalate (PET) to Laccase Immobilization Applied in Catechol Biodegradation for Water Treatment

  • Reyna Orsua-Gaona,
  • Rosa Idalia Narro-Céspedes,
  • Anna Ilina,
  • Luis Fernando Mora-Cortés and ,
  • Yadira Karina Reyes-Acosta,
  • Gustavo Soria-Arguello,
  • Cynthia Luevano-Martínez,
  • Miriam Paulina Luévanos-Escareño and
  • Claudia Gabriela Cuellar-Gaona
  • + 4 authors+ 0 author

2 April 2025

Polyethylene terephthalate (PET) is a polyester used in the beverage bottling industry that generates a serious pollution problem. Films were obtained to reuse discarded PET bottles, and their surface was modified to determine their effectiveness in...

(This article belongs to the Special Issue Advanced Technology in Environmental Remediation and Resource Utilization, 2nd Edition)
  • Article
  • Open Access
6 Citations
3,903 Views
19 Pages

14 November 2023

Unmanned surface vehicles (USVs) are experiencing significant development across various fields due to extensive research, enabling these devices to offer substantial benefits. One kind of research that has been developed to produce better USVs is pa...

(This article belongs to the Section Artificial Intelligence)
  • Article
  • Open Access
1 Citations
3,997 Views
11 Pages

In order to overcome the existing challenges presented by conventional sensors, including their large size, a complicated preparation process, and difficulties filling the sensing media, a novel high-sensitivity plasmonic resonator sensor which is co...

(This article belongs to the Special Issue Graphene Nanocomposites)
  • Article
  • Open Access
14 Citations
3,205 Views
11 Pages

Transformation and Cytotoxicity of Surface-Modified Silver Nanoparticles Undergoing Long-Term Aging

  • Chengfang Pang,
  • Panhong Zhang,
  • Yunsong Mu,
  • Jingzheng Ren and
  • Bin Zhao

13 November 2020

Silver nanoparticles (AgNPs) are constituents of many consumer products, but the future of their production depends on ensuring safety. The stability of AgNPs in various physiological solutions and aging in storage may affect the accuracy of predicte...

(This article belongs to the Section Environmental Nanoscience and Nanotechnology)
  • Article
  • Open Access
1,191 Views
13 Pages

Surface-Functionalized Glass Nanoparticles with Algae-Derived Bio-Binder (ADBB) as Reinforcing Agent for Epoxy/ADBB Matrix Nanocomposite

  • Abhijeet Mali,
  • Torti Uwaike,
  • Philip Agbo,
  • Shobha Mantripragada and ,
  • Lijun Wang and
  • Lifeng Zhang
  • + 1 author+ 0 author

14 May 2025

The algae-derived bio-binder (ADBB) from hydrothermal liquefaction has been reported to be an effective and sustainable new alternative to petroleum-based curing agents for epoxy resin. However, there is still room for the epoxy/ADBB system to attain...

(This article belongs to the Special Issue Synthesis, Design, Preparation and Processing of Functional Polymer Composites)
  • Article
  • Open Access
5 Citations
2,964 Views
17 Pages

Investigating the Effectiveness of Fourier Transform Infrared Spectroscopy (FTIR) as an Antifraud Approach for Modified Epoxy Asphalt Mixes in Developing Countries

  • Esdras Ngezahayo,
  • Mehran Eskandari Torbaghan,
  • Nicole Metje,
  • Michael Burrow and ,
  • Gurmel S. Ghataora and
  • Yitagesu Desalegn
  • + 1 author+ 0 author

27 November 2023

The road surfacing material is continuously exposed to both traffic and climate stresses, including extreme temperatures and heavy rainfalls. Subsequently, most road defects start from the surface and potentially develop into road structural damage....

  • Article
  • Open Access
4 Citations
4,078 Views
14 Pages

The Potential of Nano-Porous Surface Structure for Pain Therapeutic Applications: Surface Properties and Evaluation of Pain Perception

  • Ching-Zong Wu,
  • Ling-Chuan Hsu,
  • Hsin-Hua Chou,
  • Sanne Barnkob and ,
  • Tobias Eggert,
  • Pernille Lind Nielsen,
  • Roger Young,
  • Lene Vase,
  • Kelun Wang and
  • Lene Baad-Hansen
  • + 7 authors+ 2 authors

1 July 2020

The objective of this study was to evaluate the biomaterial properties of nano-modified surface acupuncture needles and the effect of such needles on human pain perception by using pressure pain threshold (PPT) measurements. It is known that changing...

(This article belongs to the Special Issue Application of the Biocomposite Materials on Bone Reconstruction)
  • Article
  • Open Access
20 Citations
6,530 Views
13 Pages

30 December 2022

The development of integrated circuits and packaging technology has led to smaller and smaller transmission line sizes and higher and higher operating frequencies up to nearly 100 GHz. However, the skinning depth of transmission lines due to eddy cur...

(This article belongs to the Section E: Engineering and Technology)
  • Review
  • Open Access
29 Citations
6,293 Views
33 Pages

Underwater Drag Reduction Applications and Fabrication of Bio-Inspired Surfaces: A Review

  • Zaixiang Zheng,
  • Xin Gu,
  • Shengnan Yang,
  • Yue Wang and ,
  • Ying Zhang,
  • Qingzhen Han and
  • Pan Cao
  • + 2 authors+ 0 author

As an emerging energy-saving approach, bio-inspired drag reduction technology has become a key research direction for reducing energy consumption and greenhouse gas emissions. This study introduces the latest research progress on bio-inspired microst...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: Biomimetic Surfaces and Interfaces 2025)
  • Article
  • Open Access
9 Citations
3,261 Views
13 Pages

21 November 2024

Developing new nanomaterials and performing functionalization to increase their photocatalytic capacity are essential in developing low-cost, eco-friendly, and multipurpose-capacity catalysts. In this research, SnO2/Se-doped quantum dots (QDs) covere...

(This article belongs to the Special Issue Advances in Micro- and Nanomaterials: Synthesis and Applications)
  • Article
  • Open Access
15 Citations
2,639 Views
15 Pages

30 September 2021

This paper deals with the influence of the type of transparent surface finish on the change of colour of the surfaces of native wood, and thermally treated wood, with saturated water vapour. In the experiment, alder, European beech, Paper birch, and...

(This article belongs to the Special Issue Durability and Modification of Wood Surfaces)
  • Article
  • Open Access
843 Views
21 Pages

25 December 2025

In order to address potential fatigue fractures at the valve stem-neck junction during engine operations, surface mechanical rolling treatment (SMRT) was introduced to enhance the rotary bending fatigue (RBF) performance of 4Cr14Ni14W2Mo engine valve...

(This article belongs to the Special Issue Surface Engineering Technology and Tribological/Fatigue Behaviors for Advanced Materials)
  • Article
  • Open Access
2 Citations
1,459 Views
17 Pages

Development of Virtual Disk Method for Propeller Interacting with Free Surface

  • Sua Jeong,
  • Hwi-Su Kim,
  • Yoon-Ho Jang,
  • Byeong-U You and
  • Kwang-Jun Paik

5 October 2025

As the environmental regulations of the International Maritime Organization (IMO) become more stringent, the accurate prediction of ship propulsion performance has become essential. Under ballast conditions where the draft is shallow, the propeller a...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
3 Citations
2,142 Views
19 Pages

Double bituminous surface treatment (DBST) has been a widely utilized pavement maintenance material due to its capability to restore the surface roughness of existing pavement and provide a layer of protection against weathering, aging, and moisture....

(This article belongs to the Special Issue Advanced Polymeric Materials and Coatings: Synthesis, Properties and Applications)
  • Review
  • Open Access
171 Citations
17,153 Views
48 Pages

The characterization of chemically modified sensors and biosensors is commonly performed by cyclic voltammetry and electron microscopies, which allow verifying electrode mechanisms and surface morphologies. Among other techniques, X-ray photoelect...

(This article belongs to the Special Issue Electrochemical Sensors for Environmental and Food Analysis)
  • Article
  • Open Access
11 Citations
3,894 Views
16 Pages

31 October 2021

Building more sustainable pavements for the future requires knowledge of alternative and innovative materials for utilization in future road construction and maintenance activities. Being mindful of this need, the present study investigates a Reacted...

(This article belongs to the Section G: Energy and Buildings)
  • Article
  • Open Access
9 Citations
1,740 Views
18 Pages

Construction of High-Load-Bearing Capacity Polyamide-Imide Self-Lubricating Coatings with Various Nanoparticles Through Worn Surface of Cobblestone-like Road

  • Wenyong Ye,
  • Mengchuan Niu,
  • Lijie Bian,
  • Chunjian Duan and ,
  • Chuanping Gao,
  • Pingyu Zhang,
  • Yujuan Zhang and
  • Shengmao Zhang
  • + 3 authors+ 0 author

14 March 2025

Polymer composite coatings exhibit excellent mechanical properties, chemical resistance, and self-lubricating characteristics, providing an effective solution to address the failure of transmission components under harsh operating conditions, includi...

(This article belongs to the Special Issue Tribological Behavior and Mechanical Performance of Coatings and Materials)
  • Article
  • Open Access
3 Citations
4,477 Views
10 Pages

Quantification of Modifiers Fading during Melt Holding in the Aluminum Casting Furnace

  • Mile Djurdjevic,
  • Srecko Manasijevic,
  • Slavko Smiljanic and
  • Marko Ristic

21 January 2023

Strontium (Sr) and sodium (Na) are the most used modifiers in the aluminum casting industry. Both lose their concentration (fade) during holding in the melting furnace. Three types of chemical reactions in the melt may cause modifier fading: vaporizi...

(This article belongs to the Special Issue Emerging Topics on High Performance Alloys)
  • Abstract
  • Open Access
1,648 Views
2 Pages

Owing to high thermal and chemical stability and good mechanical properties, polybenzimidazole (PBI) doped with phosphoric acid is a very promising material to be used as an electrolyte in medium-temperature fuel cells. However, PBI use at temperatur...

(This article belongs to the Proceedings of The 1st International Electronic Conference on Processes: Processes System Innovation)
  • Feature Paper
  • Article
  • Open Access
39 Citations
5,402 Views
20 Pages

Zeolite-Rich Composite Materials for Environmental Remediation: Arsenic Removal from Water

  • Bruno de Gennaro,
  • Paolo Aprea,
  • Barbara Liguori,
  • Barbara Galzerano and ,
  • Antonio Peluso and
  • Domenico Caputo
  • + 1 author+ 0 author

3 October 2020

Natural zeolites are used as adsorbents in purification processes due to their cation-exchange ability and molecular sieve properties. Surface modified natural zeolites (SMNZs), produced by attaching cationic organic surfactants to the external surfa...

(This article belongs to the Special Issue Sorption of Environmental Pollutants: Thermodynamic and Kinetic Aspects)
  • Article
  • Open Access
69 Citations
5,002 Views
10 Pages

Bacterial Adhesion on Femtosecond Laser-Modified Polyethylene

  • Karin Schwibbert,
  • Friederike Menzel,
  • Nadja Epperlein,
  • Jörn Bonse and
  • Jörg Krüger

24 September 2019

In this study, femtosecond laser-induced sub-micrometer structures are generated to modify polyethylene (PE) surface topographies. These surfaces were subjected to bacterial colonization studies with Escherichia coli and Staphylococcus aureus as test...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
1,130 Views
18 Pages

15 September 2025

To investigate the influence patterns and underlying mechanisms of solid waste-derived Nano-Micro-Powder (NMP) materials on asphalt performance, this study selected nano-sized silica fume (a typical industrial solid waste) along with conventionally u...

(This article belongs to the Special Issue Novel Cleaner Materials for Pavements)
  • Article
  • Open Access
2 Citations
1,399 Views
15 Pages

Study on Vacuum Breakdown Properties of Surface-Modified 304 Stainless Steel Electrodes Based on Fractal Theory

  • Shiqing Wang,
  • Shenming Zhao,
  • Bo Liu,
  • Weihong Shan and ,
  • Hao Wei,
  • Dayan Ma and
  • Hongbo Wang
  • + 2 authors+ 0 author

22 February 2025

This paper reports on the effect of the micro-morphological characteristics of stainless steel electrodes on vacuum breakdown properties under the action of a strong electric field generated by high-power electric pulses. Using chemical passivation m...

(This article belongs to the Special Issue Nano Surface Engineering: 2nd Edition)
  • Article
  • Open Access
12 Citations
3,031 Views
14 Pages

Improvement of Manganese Feroxyhyte’s Surface Charge with Exchangeable Ca Ions to Maximize Cd and Pb Uptake from Water

  • Evgenios Kokkinos,
  • Chasan Chousein,
  • Konstantinos Simeonidis,
  • Sandra Coles and ,
  • Anastasios Zouboulis and
  • Manassis Mitrakas
  • + 1 author+ 0 author

9 April 2020

The surface configuration of tetravalent manganese feroxyhyte (TMFx) was appropriately modified to achieve higher negative surface charge density and, hence, to improve its efficiency for the removal of dissolved Cd and Pb mostly cationic species fro...

(This article belongs to the Special Issue Fundamentals of Adsorbents–Synthesis, Characterisation, Properties, and Application)
  • Article
  • Open Access
3 Citations
893 Views
28 Pages

Influence of Functionalization on the Textural Properties and Photocatalytic Performance of ZnO-Modified Metakaolin Based-Geopolymer

  • Adriana-Gabriela Schiopu,
  • Mihai Oproescu,
  • Ștefan Mira,
  • Sorin Georgian Moga and ,
  • Ecaterina Magdalena Modan,
  • Paul Mereuță,
  • Miruna-Adriana Ioța and
  • Alexandru Berevoianu
  • + 3 authors+ 0 author

30 April 2026

Metakaolin-based geopolymers modified with ZnO and surface-functionalized ZnO were developed and investigated in terms of structure, morphology, textural properties, and photocatalytic performance. ZnO, ZnO@AS(zinc oxide functionalized with steric ac...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
364 Views
24 Pages

23 August 2026

SBS-modified asphalt is widely used in high-grade pavements for its excellent rutting and fatigue resistance; however, how its friction behavior evolves under submerged conditions with surface distress remains poorly understood. To address this gap,...

(This article belongs to the Section Tribology)
  • Article
  • Open Access
18 Citations
3,805 Views
12 Pages

Effect of Surface Modification by Oxygen-Enriched Chemicals on the Surface Properties of Pine Bark Biochars

  • Nitesh Kasera,
  • Victoria Augoustides,
  • Praveen Kolar,
  • Steven G. Hall and
  • Billie Vicente

20 October 2022

Sustainable waste utilization techniques are needed to combat the environmental and economic challenges faced worldwide due to the rising population. Biochars, due to their unique surface properties, offer opportunities to modify their surface to pre...

(This article belongs to the Section Environmental and Green Processes)
  • Feature Paper
  • Article
  • Open Access
1 Citations
4,542 Views
16 Pages

Cordura Fabric with Subtle Thin-Film Modifications Used for the Enhancement of Barrier Properties Against Toxic Gases (Part I)

  • John K. Duchowski,
  • Wojciech Fabianowski,
  • Angelika Monika Kolacz,
  • Piotr Kot and ,
  • Marek Natora,
  • Anna Puchala,
  • Laura Weiter and
  • Michal Wiktorko
  • + 3 authors+ 0 author

2 September 2025

This study describes the modification of polyamide fabric with the commercial name Cordura to create a material that is more resistant to the permeation of toxic gases and compound vapors while remaining permeable to water vapor and air. The surface...

(This article belongs to the Special Issue Functional Coatings for Textile Applications)
  • Article
  • Open Access
16 Citations
2,512 Views
13 Pages

Interfacial Rheological Investigation of Modified Silica Nanoparticles with Different Alkyl Chain Lengths at the n-Octane/Water Interface

  • Long Xu,
  • Shijie Wen,
  • Qiuyu Xie,
  • Fangning Fan and ,
  • Qiang Wang,
  • Xuehao Zhang,
  • Kaihe Lv,
  • Han Jia and
  • Hai Sun
  • + 4 authors+ 0 author

7 August 2024

The interfacial dilational rheology of silica nanoparticles (NPs) directly reflects the relationship between surface structure and interfacial behaviors in NPs, which has attracted significant attention in various industrial fields. In this work, mod...

(This article belongs to the Special Issue Surfactants at Liquid Interfaces: Applications in Enhanced Oil Recovery)

of 314