In this work, we use statistical concepts to evaluate the joint probability distribution of manufacturing and test parameters and estimate the future trend of wafer test yield. Owing to the difference between the development speeds of testing technol...
This paper utilizes the digital integrated circuit testing model to compute the test yield curve of future wafers and explore the influence of test guardband (TGB) on quality and yield. With the passage of three years since the COVID-19 pandemic disr...
To evaluate the prediction accuracy of the anisotropic yield function, we propose an original cruciform hole expansion test. Displacements on two axes were applied to the cruciform specimens with a hole in the center. The thickness strain in the regi...
The goal of this research was to evaluate milking temperament and its relationship with test-day milk (TDMY0) yield in Bulgarian Murrah buffaloes. This study involved 90 buffalo cows reared under a tie-stall production system which were milked twice...
Butt fusion welding is the primary connection technology for high-density polyethylene (HDPE) pipelines, yet welded joints are the most vulnerable location for pipeline service failures. Conventional uniaxial tensile tests can only obtain the average...
The rheology of cement grouts often plays a crucial role in the success of rock grouting. In practice, the rheological parameters should be timely adjusted according to the evolution of grouting pressure, flow rate and injection time. However, obtain...
This paper presents an attempt to generalize the description of the course of specimen temperature changes during the tensile test and to connect the value of the thermoelasto-plastic limit stress with the value of a clear (physical) or proof strengt...
An integrated-circuit testing model (DITM) is used to describe various factors that affect test yield during a test process. We used a probability distribution model to evaluate test yield and quality and introduced a threshold test and a guardband t...
Electronic manufacturing and design companies maintain test sites for a range of products. These products are designed according to the end-user requirements. The end user requirement, then, determines which of the proof of design and manufacturing t...
The digital integrated circuit (IC) testing model module is applied in this study to simulate the fabrication and testing of integrated circuits. The yield and quality of ICs are analyzed by assuming that the wafer devices under test conditions are n...
In order to improve predictive capabilities of numerical simulations, Yld2000-2D yield criterion is used to model the plastic anisotropic behaviors of AA5086 sheets. The parameters of Yld2000-2D yield criterion are identified based on the traditional...
This study aims at improving the empirical correlation for estimating the yield strength from small punch tests. The currently used procedure in the European standard EN 10371 to determine the elastic–plastic transition force—based on bi-...
Genetic testing is increasingly central to the evaluation of neurodevelopmental disorders (NDDs), yet most evidence emphasises diagnostic yield rather than whether findings change clinical care. We conducted a systematic review and meta-analysis (Pre...
This study investigates the trend in monthly and annual rainfall, minimum and maximum temperature (Tmin and Tmax) using the Mann–Kendall (MK) test and Sen’s slope (SS) method and evaluates the significance of their variability for maize, sorghum and...
Background/Objectives: To evaluate the diagnostic yield of phenotype-guided cytogenetic and targeted molecular genetic testing in patients referred for infertility and reproductive disorders within a tertiary medical genetics referral pathway. Method...
While force–displacement curves are often preferred in Small Punch (SP) tests due to the ease of the experimental set-up, they encompass significant uncertainties arising from frame compliance. In this work, a methodology is presented to predic...
The shear-yielding bolt is a new type of anchoring structure, and its working mechanism in layered rocks is not yet well understood. To investigate its transverse shear characteristics, this paper takes the shear-yielding bolt as the research subject...
The residual biogas potential (RBP) test is a procedure to ensure the anaerobic digestion process performance and digestate stability. Standard protocols for RBP require a significant time for sample preparation, characterisation and testing of the r...
Background/Objectives: Serum vitamin B12 testing is frequently ordered in pediatric outpatient practice, either routinely or incidentally as part of broad laboratory panels or in response to symptoms and nutritional concerns; however, how the yield o...
Background: Next-generation sequencing (NGS) has transformed pediatric epilepsy care, but real-world data on diagnostic delay and clinical utility remain limited, particularly in Chinese populations. Methods: This retrospective cohort included 930 ch...
Tamil Nadu, a state in southern India, is bereft of any native dairy or dual-purpose cattle breeds, and the state depends chiefly on crossbred cattle for milk production. Jersey crossbred cattle account for 90% of the state’s milk production. T...
Accurate and timely identification of enteric pathogens is crucial for guiding treatment in hospitalized patients with acute diarrhea. Conventional stool testing often lacks sensitivity, whereas multiplex PCR diagnostics offer rapid, comprehensive pa...
Intense selection for milk yield has increased environmental sensitivity in animals, and currently, heat stress is an expensive problem in dairy farming. The objectives were to identify the best model for characterizing environmental sensitivity in H...
In semiconductor manufacturing, the final testing phase is critical for ensuring chip quality and operational efficiency. Accurate yield prediction at this stage optimizes testing workflows, boosts production efficiency, and enhances quality control....
Water yield (WY) refers to the difference between precipitation and evapotranspiration (ET), which is vital for available terrestrial water. Climate change has led to significant changes in precipitation and evapotranspiration on a global scale, whic...
The study aimed to estimate the components of rumination time (RT) variability recorded by a neck collar sensor and the relationship between RT and milk composition. Milk test day (TD) and RT data were collected from 691 cows in three farms. Daily RT...
Exponential development of post-yield strain (Ԑpost) is a pivotal indicator of failure in embankments constructed on soft saturated clays. This paper characterizes saturated clay stratum comprising very soft to very stiff stratigraphy, with pla...
Three-dimensional printing (3DP) has gained increasing attention in construction as a means of addressing labor shortages and improving efficiency. Various studies have investigated fiber-reinforced mortars for 3DP. However, only a few studies have e...
Decision-support system (DSS) IoFarm was developed to identify economically optimal fertilizer strategies on the farm level. The average cost savings are 66 EUR ha−1. This study aimed to determine whether this approach impacts yield, protein content,...
The molecular orientation formed by melt-forming processes depends strongly on the flow direction. Quantifying this anisotropy, which is more pronounced in polymer blends, is important for assessing the mechanical properties of thermoplastic molded p...
This paper proposes a novel technique of TSV BIST repair that targets the design yield and various test challenges of three-dimensional integrated circuits (3D stacked ICs). The proposed methodology is efficient to cover the various faults during the...
The literature suggests that the yield strain of cortical bone is invariant to its stiffness (elastic modulus) and strength (yield stress). However, data about intra-individual variations, e.g., the influence of different collagen/mineral organisatio...
Goats have important social and economic roles in many countries because of their ability to survive and be productive in marginal areas. The overarching aim of this study was to compare the application of Wood’s model to different test-day milk reco...
Site-specific measurements of the crop yield during harvesting are essential for successfully implementing precision management techniques. This study aimed to estimate the mass of radish tubers using the impact principle under simulated vibration an...
This research aimed to evaluate the comparative biogas yields of waste (peels) of selected fibrous materials from the West African region: cassava, plantain, a mixture of cassava, plantain and yam. Three models: The Boyle model, the Modified Boyle’s...
In this study, we present the results of the impact of abiotic environmental (chemical) stressors in the soil environment (salinity, acidification, inorganic elements from industry—red mud waste containing Al) on the content and fluorescence of...
HY-80 and HY-100 steels, widely used in constructing large ocean vessels and submarine hulls, contain mixed microstructures of tempered bainite and martensite and provide high tensile strength and toughness. Weld integrity in HY steels has been studi...
3D printing (3DP) of cement-based systems (CBSs) is a highly demanded technology in the construction field. Material requirements include specific rheological conditions for proper extrusion, followed by fast stiffening and strength gain to allow the...
The mechanical properties of ductile metals are generally assessed by means of tensile testing. Compression testing of metal alloys is usually only applied for brittle materials, or if the available specimen size is limited (e.g., in micro indentatio...
The yield strength of materials under plane strain deformation is often not characterized experimentally due to difficulties that arise in interpreting the results of plane strain tensile tests. The strain and stress fields in the gauge region of the...
The Saffman–Taylor instability for yield stress fluids appears in various situations where two solid surfaces initially separated by such a material (paint, puree, concrete, yoghurt, glue, etc.) are moved away from each other. The theoretical t...
Friction stir welding (FSW) has been considered ideal for aluminum alloy structures. The performance of FSW joints under unidirectional stress state has been widely tested, but there is still a lack of experimental data under a biaxial stress state....
Štore Steel Ltd. is one of the biggest flat spring steel producers in Europe. The main motive for this study was to study the influences of non-metallic inclusions on mechanical properties obtained by tensile testing. From January 2016 to Dece...
Winter wheat is one of the most important crops globally and also in Hungary. Hungary has excellent crop production potential including seed production. The aim of our experiment is to determine the effects of different amounts and proportions of nut...
The level of yield variation of primary crops has a considerable effect on the vulnerability of agriculture. The main factor that makes the agriculture of Hungary so vulnerable is climate change, and technological development cannot compensate for it...
The rapid growth of cover crop planting area in the U.S. helps with erosion control, soil health, control of greenhouse gases, and also provides abundant biomass for the production of bioenergy and bioproducts. Given the cover crops’ compositio...
A field investigation on direct seeded rice (DSR) was carried out in the two consecutive rice growing seasons of 2017 and 2018 at Pantnagar, Uttarakhand, India for the development and validation of soil test crop response (STCR) to fertilizer and for...
Background/Objectives: Diabetes predisposes to magnesium deficiency, yet serum magnesium is not routinely measured. Using an unselected national sample, I sought a practical criterion for predicting which adults with diabetes are more likely to have...
Under out-of-plane loading, composite sandwich wall panels may develop relative slip between the wythes and end slip at the intermediate-layer interface, weakening composite action and flexural stiffness. Previous studies have mainly focused on beari...
An experimental study of closed hollow sections subjected to torsional loading was conducted. The aim was to examine the torsional behavior of thick-walled 6061-T6 aluminum alloy tubes. The test plan included three sets of circular and rectangular tu...
of 455