Skip to Content

330 Results Found

  • Article
  • Open Access
28 Citations
8,660 Views
18 Pages

A Comparison of the Effects of Ultrasonic Cavitation on the Surfaces of 45 and 40Kh Steels

  • Dmitriy S. Fatyukhin,
  • Ravil I. Nigmetzyanov,
  • Vyacheslav M. Prikhodko,
  • Aleksandr V. Sukhov and
  • Sergey K. Sundukov

11 January 2022

The ultrasonic treatment of metal products in liquid is used mainly to remove various kinds of contaminants from surfaces. The effects of ultrasound not only separate and remove contaminants, they also significantly impact the physical–mechanic...

(This article belongs to the Special Issue Effect of Ultrasound on the Structure and Properties of Metallic Materials)
  • Article
  • Open Access
1 Citations
2,784 Views
13 Pages

Extension and Limits of Depolarization-Fringe Contrast Roughness Method in Sub-Micron Domain

  • Franziska Pöller,
  • Félix Salazar Bloise,
  • Martin Jakobi,
  • Jie Dong and
  • Alexander W. Koch

19 August 2021

To guarantee quality standards for the industry, surface properties, particularly those of roughness, must be considered in many areas of application. Today, several methods are available on the market, but some damage the surface to be tested as the...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
56 Citations
5,204 Views
15 Pages

Disproportionate Effect of Sub-Micron Topography on Osteoconductive Capability of Titanium

  • Juri Saruta,
  • Nobuaki Sato,
  • Manabu Ishijima,
  • Takahisa Okubo and ,
  • Makoto Hirota and
  • Takahiro Ogawa
  • + 1 author+ 0 author

18 August 2019

Titanium micro-scale topography offers excellent osteoconductivity and bone–implant integration. However, the biological effects of sub-micron topography are unknown. We compared osteoblastic phenotypes and in vivo bone and implant integration...

(This article belongs to the Special Issue Functional Materials for Bone Regeneration: Biomaterials and Cells)
  • Article
  • Open Access
13 Citations
5,889 Views
12 Pages

Non-Contact Roughness Measurement in Sub-Micron Range by Considering Depolarization Effects

  • Franziska Pöller,
  • Félix Salazar Bloise,
  • Martin Jakobi,
  • Shengjia Wang and ,
  • Jie Dong and
  • Alexander W. Koch
  • + 1 author+ 0 author

14 May 2019

The characteristics of a surface, particularly the roughness, play an important role in different fields of the industry and have to be considered to ensure quality standards. Currently, there are numerous sophisticated methods for measuring surface...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
211 Citations
15,502 Views
8 Pages

Long Low-Loss-Litium Niobate on Insulator Waveguides with Sub-Nanometer Surface Roughness

  • Rongbo Wu,
  • Min Wang,
  • Jian Xu,
  • Jia Qi and ,
  • Wei Chu,
  • Zhiwei Fang,
  • Jianhao Zhang,
  • Junxia Zhou,
  • Lingling Qiao and
  • Ya Cheng
  • + 7 authors+ 2 authors

6 November 2018

In this paper, we develop a technique for realizing multi-centimeter-long lithium niobate on insulator (LNOI) waveguides with a propagation loss as low as 0.027 dB/cm. Our technique relies on patterning a chromium thin film coated on the top surface...

(This article belongs to the Special Issue Synthesis and Modification of Nanostructured Thin Films)
  • Article
  • Open Access
585 Views
19 Pages

High Removal Rates and Atomically Smooth Surfaces Are Achieved on Silicon Wafers Using the New SiO2@ZrO2 Core–Shell Abrasive

  • Maokui Wang,
  • Weilong He,
  • Kai Feng,
  • Rui Ye and ,
  • Yunci Wang,
  • Weiyi Guan,
  • Facheng Qiu,
  • Xing Fan and
  • Renlong Liu
  • + 4 authors+ 0 author

26 August 2026

The relentless miniaturization of integrated circuits demands chemical mechanical polishing (CMP) technologies that achieve both high material removal rates (MRR) and atomic-scale surface quality. Herein, we synthesize sub-100 nm SiO2@ZrO2 core&ndash...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
7 Citations
2,665 Views
15 Pages

Optimization of Diamond Polishing Process for Sub-Nanometer Roughness Using Ar/O2/SF6 Plasma

  • Lei Zhao,
  • Xiangbing Wang,
  • Minxing Jiang,
  • Chao Zhao and ,
  • Nan Jiang,
  • Kazhihito Nishimura,
  • Jian Yi and
  • Shuangquan Fang
  • + 3 authors+ 0 author

3 June 2025

Diamond, known for its exceptional physical and chemical properties, shows great potential in advanced fields such as medicine, semiconductors, and optics. However, reducing surface roughness is critical for enhancing its performance. This study empl...

(This article belongs to the Section Carbon Materials)
  • Communication
  • Open Access
20 Citations
4,728 Views
7 Pages

Surface Roughness Tuning at Sub-Nanometer Level by Considering the Normal Stress Field in Magnetorheological Finishing

  • Xiaoyuan Li,
  • Qikai Li,
  • Zuoyan Ye,
  • Yunfei Zhang and ,
  • Minheng Ye and
  • Chao Wang
  • + 1 author+ 0 author

21 August 2021

Although magnetorheological finishing (MRF) is being widely utilized to achieve ultra-smooth optical surfaces, the mechanisms for obtaining such extremely low roughness after the MRF process are not fully understood, especially the impact of finishin...

  • Article
  • Open Access
8 Citations
2,216 Views
16 Pages

29 November 2023

This paper presents the research results on the influence of vibration abrasive machining parameters on the surface layer integrity of elements made by LPBF technology from Inconel 939. The research was carried out on samples of various sizes on vibr...

(This article belongs to the Special Issue Nonconventional Technology in Materials Processing-3rd Edition)
  • Article
  • Open Access
1,472 Views
16 Pages

Snow Surface Roughness at a Ski Resort During Melt

  • Steven R. Fassnacht,
  • Javier Herrero and
  • Jessica E. Sanow

When snow is present, the snow surface is the interface between the atmosphere and the Earth’s surface. The snowpack energy balance is dictated in part by snow surface roughness, which can be quite dynamic. At the Sierra Nevada ski resort in Sp...

(This article belongs to the Special Issue Current Snow Science Research 2025–2026)
  • Feature Paper
  • Article
  • Open Access
7 Citations
1,532 Views
18 Pages

2 November 2025

Biomimetic superhydrophobic surfaces have become a focal point of recent research, driven by their promise in diverse applications. Among these, the lotus and rose effects are of particular interest due to their contrasting adhesion characteristics....

(This article belongs to the Special Issue Superhydrophobic Coatings, 2nd Edition)
  • Article
  • Open Access
38 Citations
6,355 Views
16 Pages

24 January 2025

Superhydrophobicity is closely linked to the chemical composition and geometric characteristics of surface roughness. Building on our structural studies on water and air–water interfaces, this work aims to elucidate the mechanism underlying the...

(This article belongs to the Special Issue Superhydrophobic Coating Materials: Preparation, Strategy and Application)
  • Article
  • Open Access
10 Citations
3,077 Views
19 Pages

Thickness, Annealing, and Surface Roughness Effect on Magnetic and Significant Properties of Co40Fe40B10Dy10 Thin Films

  • Wen-Jen Liu,
  • Yung-Huang Chang,
  • Chia-Chin Chiang,
  • Yuan-Tsung Chen and ,
  • Yu-Zhi Wang,
  • Chueh-Lin Wu,
  • Shih-Hung Lin and
  • Sin-Liang Ou
  • + 3 authors+ 0 author

31 August 2023

In this study, Co40Fe40B10Dy10 thin films were deposited using a direct current (DC) magnetron sputtering technique. The films were deposited on glass substrates with thicknesses of 10, 20, 30, 40, and 50 nm, and heat-treated in a vacuum annealing fu...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
5 Citations
3,664 Views
18 Pages

The Relationship between Annealing Temperatures and Surface Roughness in Shaping the Physical Characteristics of Co40Fe40B10Dy10 Thin Films

  • Chi-Lon Fern,
  • Wen-Jen Liu,
  • Chia-Chin Chiang,
  • Yung-Huang Chang and ,
  • Yuan-Tsung Chen,
  • Yu-Zhi Wang,
  • Jia-Wei Liu,
  • Shih-Hung Lin,
  • Ko-Wei Lin and
  • Sin-Liang Ou
  • + 5 authors+ 0 author

5 November 2023

Co40Fe40B10Dy10 thin films, with thicknesses varying between 10 nm and 50 nm, were grown on a Si(100) substrate. Subsequently, they underwent a 1 h annealing process in an Ar atmosphere at temperatures of 100 °C, 200 °C, and 300 °C. The o...

(This article belongs to the Special Issue Advanced Thin Films Technologies for Optics, Electronics, and Sensing)
  • Article
  • Open Access
10 Citations
1,915 Views
14 Pages

The Influence of CLSM Magnification on the Measured Roughness of Differently Prepared Dental Materials

  • Martin Rosentritt,
  • Anne Schmutzler,
  • Sebastian Hahnel and
  • Laura Kurzendorfer-Brose

5 December 2024

This in vitro study investigated how varying magnifications (5×, 10×, 20×, and 50×) using a confocal laser scanning microscope (CLSM) influence the measured surface roughness parameters, Ra/Sa and Rz/Sz, of various materials w...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
9 Citations
5,106 Views
17 Pages

2 June 2017

Changes in the physical properties of the supercritical CO2 (scCO2) reservoir rock is one of the most important factors in controlling the storage safety at a scCO2 sequestration site. According to recent studies, it is probable that geochemical reac...

(This article belongs to the Special Issue The Applications of Supercritical Carbon Dioxide)
  • Article
  • Open Access
4 Citations
1,598 Views
17 Pages

Investigation of Sm Addition on Microstructural and Optical Properties of CoFe Thin Films

  • Wen-Jen Liu,
  • Yung-Huang Chang,
  • Chia-Chin Chiang,
  • Jian-Xin Lai and ,
  • Yuan-Tsung Chen,
  • Hsiung-Liang Chen and
  • Shih-Hung Lin
  • + 2 authors+ 0 author

31 July 2023

CoFe-based alloys and rare earth (RE) elements are among the most studied materials in applying magnetic devices to improve soft magnetic characteristics. A series of Co40Fe40Sm20 films are deposited on a glass substrate via the sputtering technique,...

(This article belongs to the Section Thin Films and Interfaces)
  • Technical Note
  • Open Access
3 Citations
1,790 Views
14 Pages

A New Formulation and Code to Compute Aerodynamic Roughness Length for Gridded Geometry—Tested on Lidar-Derived Snow Surfaces

  • Rachel A. Neville,
  • Patrick D. Shipman,
  • Steven R. Fassnacht,
  • Jessica E. Sanow and ,
  • Ron Pasquini and
  • Iuliana Oprea
  • + 1 author+ 0 author

8 June 2025

The roughness of the Earth’s surface dictates the nature of air flow across it. Detailed meteorological data that are necessary to access the aerodynamic roughness (z0) are not widely collected and, as such, the geometry of a surface can be use...

  • Article
  • Open Access
32 Citations
6,846 Views
17 Pages

Surface Roughness and Its Effect on Adhesion and Tribological Performance of Magnetron Sputtered Nitride Coatings

  • Pal Terek,
  • Lazar Kovačević,
  • Vladimir Terek,
  • Zoran Bobić and ,
  • Aleksandar Miletić,
  • Branko Škorić,
  • Miha Čekada and
  • Aljaž Drnovšek
  • + 3 authors+ 0 author

9 August 2024

Reports of the influence of surface roughness on the adhesion and tribological performance of contemporary nitride coatings with different layer designs are still scarce in the literature. Therefore, in this study, we evaluated the behavior of a sing...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
559 Views
22 Pages

30 May 2026

Surface quality in turning is still evaluated mainly by post-process profilometry, which limits the use of sensor feedback during machining. This article examines whether perpendicular vibration displacement can be used as a practical indirect indica...

(This article belongs to the Topic Advanced Engines Technologies)
  • Article
  • Open Access
3 Citations
1,085 Views
20 Pages

Sensitivity Analysis of Process Parameters on Deposition Quality and Multi-Objective Prediction in Ion-Assisted Electron Beam Evaporation of Ta2O5 Films

  • Yaowei Wei,
  • Jianchong Li,
  • Wenze Ma,
  • Hongqin Lei and ,
  • Fei Zhang,
  • Zhenfei Luo,
  • Henan Liu,
  • Xianghui Huang,
  • Linjie Zhao and
  • Mingjun Chen
  • + 5 authors+ 0 author

27 January 2026

Tantalum pentoxide (Ta2O5) films deposited on fused silica substrates are critical components of high-power laser systems. Ion-assisted electron beam evaporation (IAD-EBE) is the mainstream technique for fabricating Ta2O5 films. However, it commonly...

(This article belongs to the Special Issue Advances in Digital Manufacturing and Nano Fabrication)
  • Article
  • Open Access
3 Citations
1,206 Views
23 Pages

Optimizing EDM of Gunmetal with Al2O3-Enhanced Dielectric: Experimental Insights and Machine Learning Models

  • Saumya Kanwal,
  • Usha Sharma,
  • Saurabh Chauhan,
  • Anuj Kumar Sharma and ,
  • Jitendra Kumar Katiyar,
  • Rabesh Kumar Singh and
  • Shalini Mohanty
  • + 2 authors+ 0 author

2 October 2025

This study investigates the optimization of electric discharge machining (EDM) parameters for gunmetal using copper electrodes in two different dielectric environments, which are conventional EDM oil and EDM oil infused with Al2O3 nanoparticles. A Ta...

(This article belongs to the Special Issue Non-conventional Machining: Materials and Processes)
  • Article
  • Open Access
119 Views
14 Pages

13 November 2026

The machining of technical ceramics remains challenging due to the need to achieve high dimensional accuracy, good surface quality, and acceptable tool life when processing hard and brittle materials. This study investigates the influence of cutting...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
13 Citations
2,918 Views
19 Pages

Optical Characterization of AsxTe100−x Films Grown by Plasma Deposition Based on the Advanced Optimizing Envelope Method

  • Dorian Minkov,
  • George Angelov,
  • Radi Nestorov,
  • Aleksey Nezhdanov and ,
  • Dmitry Usanov,
  • Mikhail Kudryashov and
  • Aleksandr Mashin
  • + 2 authors+ 0 author

3 July 2020

Three AsxTe100−x films with different x and dissimilar average thickness d ¯ are characterized mainly from one interference transmittance spectrum T(λ = 300 to 3000 nm) of such film on a substrate based on the advanced opt...

(This article belongs to the Special Issue Optical Characterization of Novel Composite and Optically Active Materials)
  • Article
  • Open Access
12 Citations
5,809 Views
22 Pages

AC Volume Breakdown and Surface Flashover of a 4% NovecTM 4710/96% CO2 Gas Mixture Compared to CO2 in Highly Nonhomogeneous Fields

  • Houssem Eddine Nechmi,
  • Mohammed El Amine Slama,
  • Abderrahmane (Manu) Haddad and
  • Gordon Wilson

3 April 2020

AC pre-discharge currents, breakdown, and flashover voltage measurements are reported in a 10 mm needle-plane arrangement in a 4% NovecTM 4710/96% CO2 gas mixture and compared with CO2 for pressures up to 8.8 bar abs. Flashover measurements were perf...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
12 Citations
3,972 Views
22 Pages

Breakdown at Multiple Protrusions in SF6 and CO2

  • Odd Christian Feet,
  • Martin Seeger,
  • Daniel Over,
  • Kaveh Niayesh and
  • Frank Mauseth

27 August 2020

The electric breakdown at single and multiple protrusions in SF6 and CO2 is investigated at 0.4 and 0.6 MPa, respectively. Additionally, the breakdown fields at rough surfaces of two different areas were determined. From the measurements, breakdown p...

(This article belongs to the Special Issue Environmental Compatible Circuit Breaker Technologies)
  • Feature Paper
  • Article
  • Open Access
63 Citations
7,016 Views
20 Pages

Surface-Based Analysis of Leaf Microstructures for Adsorbing and Retaining Capability of Airborne Particulate Matter in Ten Woody Species

  • Myeong Ja Kwak,
  • Jong Kyu Lee,
  • Sanghee Park,
  • Handong Kim and ,
  • Yea Ji Lim,
  • Keum-Ah Lee,
  • Joung-a Son,
  • Chang-Young Oh,
  • Iereh Kim and
  • Su Young Woo
  • + 5 authors+ 0 author

29 August 2020

We evaluated surface-based analysis for assessing the possible relationship between the microstructural properties and particulate matter (i.e., two size fractions of PM2.5 and PM10) adsorption efficiencies of their leaf surfaces on ten woody species...

(This article belongs to the Section Forest Ecology and Management)
  • Article
  • Open Access
17 Citations
3,437 Views
12 Pages

9 March 2023

In this study, the viability of duty cycle variation was explored as a potential method to improve the mechanical and surface roughness properties of Ni-Al2O3 nanocoatings through pulse electrodeposition. The areal and surface roughness properties of...

(This article belongs to the Special Issue Progress on Metal Matrix Composite: Design, Processing and Application)
  • Article
  • Open Access
42 Citations
2,500 Views
22 Pages

15 November 2024

In this study, in order to improve the characteristics of the vegetable-based cutting fluids used in the MQL technique and increase the machining performance of MQL and its positive effects on sustainable manufacturing, the effects of the MQL method...

  • Article
  • Open Access
6 Citations
2,236 Views
18 Pages

8 December 2024

This study explores cobalt–cerium (Co90Ce10) thin films deposited on silicon (Si) (100) and glass substrates via direct current (DC) magnetron sputtering, with thicknesses from 10 nanometer (nm) to 50 nm. Post-deposition annealing treatments, c...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
10 Citations
1,622 Views
35 Pages

29 March 2025

This study investigates the influence of thermal conductivity and hardness on computer numerical control (CNC) turning performance, focusing on key machining metrics—material removal rate (MRR), surface roughness (Ra), and surface waviness (Wa)...

  • Article
  • Open Access
3 Citations
2,142 Views
15 Pages

11 October 2021

Sintered zinc oxide (ZnO) ceramic is a fragile and difficult-to-cut material, so finishing operations demand handling cautious and accurate surface tolerances by polishing, grinding, or machining. The conventional machining methods based on grinding...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
25 Citations
4,011 Views
10 Pages

Enhanced Switching Reliability of Sol–Gel-Processed Y2O3 RRAM Devices Based on Y2O3 Surface Roughness-Induced Local Electric Field

  • Do-Won Kim,
  • Hyeon-Joong Kim,
  • Won-Yong Lee,
  • Kyoungdu Kim and ,
  • Sin-Hyung Lee,
  • Jin-Hyuk Bae,
  • In-Man Kang,
  • Kwangeun Kim and
  • Jaewon Jang
  • + 4 authors+ 0 author

5 March 2022

Sol–gel-processed Y2O3 films were used as active channel layers for resistive random access memory (RRAM) devices. The fabricated ITO/Y2O3/Ag RRAM devices exhibited the properties of conventional bipolar memory devices. A triethylamine stabiliz...

(This article belongs to the Section Electronic Materials)
  • Article
  • Open Access
9 Citations
3,309 Views
16 Pages

Tribological Performance of Diamond Films with Different Roughnesses of Silicon Nitride Substrates and Carbon Source Concentrations

  • Feng Lu,
  • Tianwei Liu,
  • Xu Bai,
  • Yuhou Wu and ,
  • He Wang and
  • Guangyu Yan
  • + 1 author+ 0 author

Diamond films were deposited on silicon nitride (Si3N4) substrates with three different roughnesses using the method of hot-filament chemical vapor deposition (HFCVD). The tribological properties of the film were studied by changing the deposition ti...

(This article belongs to the Collection Feature Papers in Inorganic Membranes and Hybrid Materials)
  • Article
  • Open Access
7 Citations
2,834 Views
21 Pages

Influence of Tools and Cutting Strategy on Milling Conditions and Quality of Horizontal Thin-Wall Structures of Titanium Alloy Ti6Al4V

  • Szymon Kurpiel,
  • Bartosz Cudok,
  • Krzysztof Zagórski,
  • Jacek Cieślik and ,
  • Krzysztof Skrzypkowski and
  • Witold Brostow
  • + 1 author+ 0 author

18 December 2023

Titanium and nickel alloys are used in the creation of components exposed to harsh and variable operating conditions. Such components include thin-walled structures with a variety of shapes created using milling. The driving factors behind the use of...

(This article belongs to the Special Issue Advanced Sensing and Evaluating Technology in Nondestructive Testing)
  • Article
  • Open Access
4 Citations
3,252 Views
19 Pages

23 October 2023

Aluminum–ceramic materials based on Al2O3 and AlN are widely used in the electronics industry and, according to a number of electrophysical and technical and economic parameters, are among the most suitable for the production of electrical and...

(This article belongs to the Special Issue Advances in Ceramics, 2nd Edition)
  • Article
  • Open Access
9 Citations
3,504 Views
17 Pages

The Impact of Al2O3 Particles from Grit-Blasted Ti6Al7Nb (Alloy) Implant Surfaces on Biocompatibility, Aseptic Loosening, and Infection

  • Boštjan Kocjančič,
  • Klemen Avsec,
  • Barbara Šetina Batič,
  • Darja Feizpour and ,
  • Matjaž Godec,
  • Veronika Kralj-Iglič,
  • Rok Podlipec,
  • Andrej Cör,
  • Mojca Debeljak and
  • Drago Dolinar
  • + 7 authors+ 2 authors

26 October 2023

For the improvement of surface roughness, titanium joint arthroplasty (TJA) components are grit-blasted with Al2O3 (corundum) particles during manufacturing. There is an acute concern, particularly with uncemented implants, about polymeric, metallic,...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
7 Citations
3,028 Views
9 Pages

18 July 2024

α-Ga2O3 films were grown on a c-plane sapphire substrate by HCl-supported mist chemical vapor deposition with multiple solution chambers, and the effect of HCl support on α-Ga2O3 film quality was investigated. The growth rate monotonicall...

(This article belongs to the Special Issue Advances in Wide-Bandgap Semiconductor Nanomaterials)
  • Article
  • Open Access
13 Citations
4,295 Views
13 Pages

Study on Laser Polishing of Ti6Al4V Fabricated by Selective Laser Melting

  • Shuo Huang,
  • Junyong Zeng,
  • Wenqi Wang and
  • Zhenyu Zhao

28 February 2024

Laser-based additive manufacturing has garnered significant attention in recent years as a promising 3D-printing method for fabricating metallic components. However, the surface roughness of additive manufactured components has been considered a chal...

(This article belongs to the Special Issue Ultrafast Laser Processing of Difficult-to-Machine Materials and Micro/Nano Structures)
  • Article
  • Open Access
7 Citations
2,987 Views
18 Pages

22 September 2023

This study has focused on analyzing the impact of material characteristics and grinding conditions on the surface roughness in ELID grinding of ceramic materials intended for bearing balls. The main research objective was to examine the feasibility o...

  • Article
  • Open Access
27 Citations
2,539 Views
15 Pages

23 September 2023

To investigate the micro-grinding process and performance of 2.5D Cf/SiC composites and 2.5D SiCf/SiC composites in depth, single-factor micro-grinding experiments were conducted by using SiC ceramics as a comparison. Differences in the material remo...

(This article belongs to the Special Issue Processing–Structure–Properties Relationships of Advanced Materials)
  • Article
  • Open Access
2 Citations
3,347 Views
18 Pages

Parameterization and Remote Sensing Retrieval of Land Surface Processes in the Gurbantunggut Desert, China

  • Wei Li,
  • Jiacheng Gao,
  • Ali Mamtimin,
  • Yongqiang Liu and ,
  • Yu Wang,
  • Meiqi Song,
  • Cong Wen,
  • Ailiyaer Aihaiti,
  • Fan Yang and
  • Zhengnan Cui
  • + 8 authors+ 3 authors

19 May 2023

The exchange of energy between the land surface and atmosphere is dependent upon crucial parameters, including surface roughness, emissivity, bulk transfer coefficients for momentum (CD) and heat (CH). These parameters are calculated through site obs...

(This article belongs to the Special Issue Understanding the Meteorological Environment in Arid Regions through the Integrative Analyses of Remote Sensing, Ground Observational Stations and Numerical Models)
  • Article
  • Open Access
5 Citations
2,959 Views
14 Pages

Effect of an In-Office Bleaching Agent with Surface Pre-Reacted Glass-Ionomer Filler on the Enamel Surface: A In-Vitro Study

  • Mika Shimojima,
  • Noriko Hiraishi,
  • Kodai Akabane,
  • Mohannad Nassar and ,
  • Masayuki Otsuki and
  • Yasushi Shimada
  • + 1 author+ 0 author

In-office bleaching with high concentrations of hydrogen peroxide (H2O2) agents causes undesirable alterations in the enamel. Surface pre-reacted glass-ionomer (S-PRG) filler is a functional material known for its acid-neutralizing and demineralizati...

(This article belongs to the Special Issue Functional Materials for Dental Restorations)
  • Article
  • Open Access
5 Citations
2,462 Views
10 Pages

Surface Morphology, Roughness, and Structural Characteristics of Al1−xMgxSb (x = 0 and 0.1) Thin Films Deposited by Chemical Bath Deposition Technique

  • Sadia Zafar,
  • Muhammad Aamir Iqbal,
  • Maria Malik,
  • Wajeehah Shahid and ,
  • Shaheen Irfan,
  • Muhammad Yasir Shabir,
  • Phuong V. Pham and
  • Jeong Ryeol Choi
  • + 3 authors+ 0 author

23 July 2022

Aluminum antimonide (AlSb), a semiconductor compound, finds its applications in optoelectronics because of its tunable bandgap and promising properties achieved by tailoring suitable dopants. To explore the effects of doping, thin films of pure AlSb...

(This article belongs to the Special Issue Feature Papers in Surface Sciences and Technology Section)
  • Article
  • Open Access
9 Citations
2,423 Views
10 Pages

Effects of Nanosecond-Pulsed Laser Milling on the Surface Properties of Al2O3 Ceramics

  • Zhaomei Xu,
  • Zhengye Zhang,
  • Qi Sun,
  • Jiale Xu and ,
  • Zhao Meng,
  • Yizhi Liu and
  • Xiankai Meng
  • + 2 authors+ 0 author

6 November 2022

The effect of nanosecond-pulsed laser milling on the surficial microstructure of Al2O3 ceramics is studied in this work. The macrostructure, microstructure, surface roughness, and milling depth of the ceramics are analyzed via scanning electron micro...

(This article belongs to the Special Issue Effects of Laser Treatment on Surface Characterization and Mechanical Properties of Alloys)
  • Article
  • Open Access
1 Citations
2,537 Views
17 Pages

Fabrication and Characterization of Gel-Forming Cr2O3 Abrasive Tools for Sapphire Substrate Polishing

  • Liang Zhao,
  • Kaiping Feng,
  • Binghai Lyu,
  • Tianchen Zhao and
  • Zhaozhong Zhou

16 December 2022

This paper proposes a gel-formed abrasive tool to address the problem of abrasive agglomeration in a traditional hot-pressing abrasive tool. The effect of Polyimide resin content on the mechanical properties of the gel abrasive tools were tested, and...

(This article belongs to the Special Issue Advanced Manufacturing Technologies and Their Applications, Volume II)
  • Article
  • Open Access
28 Citations
2,102 Views
31 Pages

20 June 2025

Additive manufacturing, particularly Fused Filament Fabrication (FFF), provides notable advantages such as design flexibility and efficient material usage. However, components produced via FFF often exhibit suboptimal surface quality and dimensional...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
2 Citations
1,708 Views
23 Pages

Synergistic Multi-Mechanism Enhancement in Chemomechanical Abrasive Polishing of Polycrystalline Diamond via a New SiO2–Diamond Slurry in High-Concentration H2O2 Solution

  • Xin Zheng,
  • Ke Zheng,
  • Jie Gao,
  • Yan Wang and ,
  • Pengtao An,
  • Yongqiang Ma,
  • Hongjun Hei,
  • Shuaiwu Qu and
  • Shengwang Yu
  • + 4 authors+ 0 author

4 August 2025

The high-efficiency polishing of large-sized polycrystalline diamond (PCD) wafers continues to pose significant challenges in its practical applications. Conventional mechanical polishing suffers from a low material removal rate (MRR) and surface dam...

(This article belongs to the Section Materials Physics)
  • Proceeding Paper
  • Open Access
2 Citations
2,179 Views
17 Pages

Surface Roughness and Fractal Analysis of TiO2 Thin Films by DC Sputtering

  • Helena Cristina Vasconcelos,
  • Telmo Eleutério and
  • Maria Meirelles

This study examines the effect of oxygen concentration and sputtering power on the surface morphology of TiO2 thin films deposited by DC reactive magnetron sputtering. Surface roughness parameters were obtained using MountainsMap® software(10.2)...

(This article belongs to the Proceedings of The 4th Coatings and Interfaces Online Conference)
  • Article
  • Open Access
1,299 Views
20 Pages

Kinetics and Morphological Characteristics of CO2 Hydrate Formation Within Sandstone Fractures

  • Chuanhe Ma,
  • Hongxiang Si,
  • Jiyao Wang,
  • Tingting Luo and ,
  • Tao Han,
  • Ziyang Dong and
  • Chaozheng Ma
  • + 2 authors+ 0 author

28 August 2025

Hydrate-based CO2 sequestration is considered one of the most promising methods in the field of carbon capture, utilization, and storage. The abundant fractured environments in marine sediments provide an ideal setting for the sequestration of CO2 hy...

(This article belongs to the Special Issue Deformation and Failure of Geomaterials in Deep Underground or Subsea Environments)

of 7