Skip to Content

394 Results Found

  • Article
  • Open Access
2,112 Views
13 Pages

Static and Dynamic Torque in the Modulation of the Caudal Vertebral Growth

  • Xue-Cheng Liu,
  • Robert Rizza,
  • John Thometz,
  • Andrew Allen and ,
  • Derek Rosol,
  • Channing Tassone,
  • Paula North and
  • Eric Jensen
  • + 3 authors+ 0 author

14 October 2025

Background/Objective: Major research demonstrates that longitudinal loading affects the vertebral growth and disc wedging in the scoliotic animal models; however, there is a scarcity of research on the effect of torque on the vertebral growth. Compar...

  • Article
  • Open Access

Static-Torque Enhancement of Darrieus Vertical-Axis Wind Turbines with Dual-Airfoil Blades

  • M. A. Carlos Alberto,
  • H. J. Vergara-Hernández,
  • L. G. Victor,
  • Martin Moreno and ,
  • Alberto Traslosheros-Michel and
  • Christian Erik Casillas Farfán
  • + 1 author+ 0 author
Wind2026, 6(4), 67;https://doi.org/10.3390/wind6040067 
(registering DOI)

17 November 2026

The limited pre-starting torque of Darrieus-type vertical-axis wind turbines remains a major restriction for low-speed wind energy applications. This study evaluates, under fixed-rotor static conditions, two integrated dual-airfoil blade concepts der...

  • Article
  • Open Access
1 Citations
1,487 Views
10 Pages

Background/Objectives: Quasi-static inverse dynamics is widely used in biomechanical analyses due to its computational simplicity; however, neglecting inertial effects may introduce joint-specific torque estimation errors during dynamic movements. Th...

(This article belongs to the Section Sports Biomechanics)
  • Article
  • Open Access
20 Citations
7,292 Views
10 Pages

4 February 2020

The aim of this study was to examine the settling of abutments into implants and the removal torque value under static loading. Five different implant-abutment connections were selected (Ext: external butt joint + two-piece abutment; Int-H2: internal...

(This article belongs to the Special Issue Dental Implant Materials 2019)
  • Article
  • Open Access
32 Citations
9,668 Views
13 Pages

2 January 2014

To address the bottleneck issues of an elastic-style six-axis force/torque sensor (six-axis force sensor), this work proposes a no-elastic piezoelectric six-axis force sensor. The operating principle of the piezoelectric six-axis force sensor is anal...

(This article belongs to the Special Issue Tactile Sensors and Sensing Systems)
  • Article
  • Open Access
17 Citations
6,483 Views
15 Pages

6 August 2019

The rehabilitation robot is an application of robotic technology for people with limb disabilities. This paper investigates a new applicable and effective sitting/lying lower limb rehabilitation robot (the LLR-Ro). In order to improve the patient&rsq...

(This article belongs to the Special Issue Advanced Intelligent Control through Versatile Intelligent Portable Platforms)
  • Article
  • Open Access
11 Citations
4,617 Views
19 Pages

Diagnosis and Robust Design Optimization of SPMSM Considering Back EMF and Cogging Torque due to Static Eccentricity

  • Jin-Cheol Park,
  • Soo-Hwan Park,
  • Jae-Hyun Kim,
  • Soo-Gyung Lee and ,
  • Geun-Ho Lee and
  • Myung-Seop Lim
  • + 1 author+ 0 author

17 May 2021

Static eccentricity (SE) is frequently generated by manufacturing processes. As the nonuniformity of the air-gap length is caused by the SE, the torque ripple and cogging torque increase in the motor. This study analyzes the distorted back electromot...

(This article belongs to the Special Issue Advanced Techniques for High-Performance Permanent Magnet Motors)
  • Article
  • Open Access
14 Citations
4,776 Views
11 Pages

Feasibility of Overground Gait Training Using a Joint-Torque-Assisting Wearable Exoskeletal Robot in Children with Static Brain Injury

  • Juntaek Hong,
  • Jongweon Lee,
  • Taeyoung Choi,
  • Wooin Choi and ,
  • Taeyong Kim,
  • Kyuwan Kwak,
  • Seongjun Kim,
  • Kyeongyeol Kim and
  • Daehyun Kim
  • + 4 authors+ 0 author

19 May 2022

Pediatric gait disorders are often chronic and accompanied by various complications, which challenge rehabilitation efforts. Here, we retrospectively analyzed the feasibility of overground robot-assisted gait training (RAGT) using a joint-torque-assi...

(This article belongs to the Special Issue Rehabilitation Robots and Sensors)
  • Article
  • Open Access
1 Citations
3,915 Views
15 Pages

1 February 2023

Serially connected statically balanced manipulators with springs have been used in many applications. However, a portion of the torques caused by springs countering each other lead to an imbalance in gravitational torques and, therefore, are deemed a...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
1 Citations
4,104 Views
15 Pages

10 October 2024

Torque is the fundamental working parameter of the internal combustion engine (ICE). In a spark ignition (SI) ICE, static torque is a function of rotational speed and throttle angle. However, ICE inertia, the distance between the throttle and cylinde...

(This article belongs to the Section I2: Energy and Combustion Science)
  • Article
  • Open Access
14 Citations
5,011 Views
12 Pages

4 January 2023

The purpose of this study was to determine the combined effects of static stretching and electrical muscle stimulation on maximal dorsiflexion angle and passive properties. Sixteen healthy subjects participated in three randomly ordered experimental...

  • Article
  • Open Access
16 Citations
4,937 Views
22 Pages

18 November 2016

Compared to the doubly fed machine, the brushless doubly fed machine (BDFM) has high reliability and low maintenance requirements. First, by taking the negative conjugation of the control motor variables in rotor reference frame, a state-space model...

  • Feature Paper
  • Article
  • Open Access
11 Citations
6,769 Views
14 Pages

Fast Torque Computation of Hysteresis Motors and Clutches Using Magneto-static Finite Element Simulation

  • Gianvito Gallicchio,
  • Marco Palmieri,
  • Mauro Di Nardo and
  • Francesco Cupertino

28 August 2019

Hysteresis motor and clutches have several advantages, such as constant torque from zero to synchronous speed, low torque ripple, and low fabrication cost. Low efficiency and power factor are the main features that have limited the application of thi...

  • Article
  • Open Access
4 Citations
3,650 Views
14 Pages

Static Torque Analysis of Micro Claw-Pole Stepper Motor Based on Field-Circuit Combination

  • Yuanxu Xin,
  • Yan Sun,
  • Xudong Wang,
  • Xiaofei Xi and ,
  • Yabin Su and
  • Yong Yang
  • + 1 author+ 0 author

13 September 2022

Because of the complexity of the structure and magnetic circuit of the micro claw-pole stepper motor, it is difficult to analyze this kind of motor quickly and accurately. Therefore, it takes a lot of time to accurately model and use the three-dimens...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
13 Citations
4,617 Views
10 Pages

The Relationship between Stretching Intensity and Changes in Passive Properties of Gastrocnemius Muscle-Tendon Unit after Static Stretching

  • Taizan Fukaya,
  • Masatoshi Nakamura,
  • Shigeru Sato,
  • Ryosuke Kiyono and ,
  • Kaoru Yahata,
  • Kazuki Inaba,
  • Satoru Nishishita and
  • Hideaki Onishi
  • + 3 authors+ 0 author

23 October 2020

This study aimed to investigate the relationship between relative or absolute intensity and changes in range of motion and passive stiffness after static stretching. A total of 65 healthy young adults voluntarily participated in this study and perfor...

  • Article
  • Open Access
18 Citations
8,318 Views
18 Pages

14 October 2020

The IceWind turbine, a new type of Vertical Axis Wind Turbine, was proposed by an Iceland based startup. It is a product that has been featured in few published scientific research studies. This paper investigates the IceWind turbine’s performa...

(This article belongs to the Special Issue Numerical Simulation of Wind Turbines)
  • Article
  • Open Access
2 Citations
3,460 Views
29 Pages

Experimental Determination of a Spoke-Type Axial-Flux Permanent Magnet Motor’s Lumped Parameters

  • Andre Mrad,
  • Jean-François Llibre,
  • Yvan Lefèvre and
  • Mohamad Arnaout

This study focuses on the experimental determination of the lumped parameters of a Spoke-Type Axial-Flux Permanent Magnet (STAFPM) motor. This type of motor offers high specific torque and is well-suited for transportation applications. The studied S...

(This article belongs to the Special Issue Feature Papers to Celebrate the ESCI Coverage)
  • Article
  • Open Access
5 Citations
7,670 Views
18 Pages

13 December 2021

Recently, due to the development of automation technology, torque measuring and monitoring technologies have been brought to the focus. However, the commercially available sensors have the disadvantage of large volume, which results in the difficulty...

(This article belongs to the Topic Multiple Application for Novel and Advanced Materials)
  • Article
  • Open Access
1 Citations
1,923 Views
29 Pages

Analysis of Friction Torque Characteristics of a Novel Ball–Roller Composite Turntable Bearing

  • Heng Tian,
  • Weiwang Li,
  • Xiuhua Shao,
  • Zhanli Zhang and
  • Wenhu Zhang

Traditional three-row roller YRT turntable bearings exhibit high friction torque during operation, which limits their performance in high-precision and high-response applications. To address this issue, a novel ball–roller composite turntable b...

  • Article
  • Open Access
29 Citations
11,362 Views
19 Pages

29 October 2016

The aim of this paper is to calculate the static eccentricity (SE) of a double rotor axial flux permanent magnet (AFPM) machine by using a general analytical model. The flux density in the air gap under healthy conditions is calculated firstly, where...

(This article belongs to the Collection Electric and Hybrid Vehicles Collection)
  • Article
  • Open Access
10 Citations
7,252 Views
24 Pages

Study on Stator-Rotor Misalignment in Modular Permanent Magnet Synchronous Machines with Different Slot/Pole Combinations

  • Danilo Riquelme,
  • Carlos Madariaga,
  • Werner Jara,
  • Gerd Bramerdorfer and ,
  • Juan A. Tapia and
  • Javier Riedemann
  • + 1 author+ 0 author

21 February 2023

Addressing stator-rotor misalignment, usually called eccentricity, is critical in permanent magnet (PM) machines since significantly high radial forces can be developed on the bearings, which can trigger a major fault and compromise the structural in...

(This article belongs to the Topic Designs and Drive Control of Electromechanical Machines)
  • Article
  • Open Access
23 Citations
4,373 Views
20 Pages

Minimization of Torque Ripple in the Brushless DC Motor Using Constrained Cuckoo Search Algorithm

  • Łukasz Knypiński,
  • Sebastian Kuroczycki and
  • Fausto Pedro García Márquez

18 September 2021

This paper presents the application of the cuckoo search (CS) algorithm in attempts to the minimization of the commutation torque ripple in the brushless DC motor (BLDC). The optimization algorithm was created based on the cuckoo’s reproductive behav...

(This article belongs to the Special Issue Environment and Electrical Engineering-Edition 2021)
  • Article
  • Open Access
14 Citations
5,306 Views
10 Pages

Isokinetic and Isometric Assessment of the Knee Joint Extensors and Flexors of Professional Volleyball Players

  • Piotr Wilkosz,
  • Jaroslaw Kabacinski,
  • Krzysztof Mackala,
  • Michal Murawa and ,
  • John Ostarello,
  • Agata Rzepnicka,
  • Lukasz Szczesny,
  • Anna Fryzowicz,
  • Jacek Maczynski and
  • Lechoslaw B. Dworak
  • + 5 authors+ 0 author

Purpose: The main objective of this study was to evaluate the level of muscle strength by using isokinetic and isometric measurements—more specifically, the force ratio between the knee flexors and extensors (values of the torques). Methods: An exper...

(This article belongs to the Special Issue Strength and Power Training in Elite Athletes to Improve Performance and Health)
  • Article
  • Open Access
5 Citations
4,657 Views
21 Pages

Torque-Based Control of a Bio-Inspired Modular Climbing Robot

  • Carlos Prados,
  • Miguel Hernando,
  • Ernesto Gambao and
  • Alberto Brunete

19 July 2023

This article presents a generalizable, low computational cost, simple, and fast gravity compensation method for legged robots with a variable number of legs. It is based on the static problem, which is a reduction in the dynamic model of the robot th...

(This article belongs to the Special Issue Intelligent Bio-Inspired Robots: New Trends and Future Perspectives)
  • Article
  • Open Access
25 Citations
2,730 Views
18 Pages

Static Output-Feedback Path-Tracking Controller Tolerant to Steering Actuator Faults for Distributed Driven Electric Vehicles

  • Miguel Meléndez-Useros,
  • Fernando Viadero-Monasterio,
  • Manuel Jiménez-Salas and
  • María Jesús López-Boada

The steering system plays a critical role in the vehicle’s handling and directly influences its lateral dynamics. Faults or abnormal behavior in this system can affect performance, cause vehicle instability, and even lead to accidents. Therefor...

(This article belongs to the Special Issue EVS37—International Electric Vehicle Symposium and Exhibition (Seoul, Republic of Korea))
  • Proceeding Paper
  • Open Access
210 Views
9 Pages

Influence of Deformation Measurement Time on the Rubber Element of a ‘SEGME’ Flexible Coupling

  • Stefan Tenev,
  • Aleksandrina Bankova,
  • Anastas Yangyozov and
  • Asparuh Atanasov

1 September 2026

Particular attention is devoted to the characteristics of elastic couplings as essential connecting elements within machine drive systems. The operational characteristics of such couplings are determined under both static and dynamic loading conditio...

(This article belongs to the Proceedings of The International Conference on Electronics, Engineering Physics and Earth Science (EEPES2026))
  • Article
  • Open Access
10 Citations
3,468 Views
17 Pages

Investigation of Torque Performance and Flux Reversal Reduction of a Three-Phase 12/8 Switched Reluctance Motor Based on Winding Arrangement

  • Ruchao Pupadubsin,
  • Seubsuang Kachapornkul,
  • Prapon Jitkreeyarn,
  • Pakasit Somsiri and
  • Kanokvate Tungpimolrut

1 January 2022

The goal of this paper is to present a comparative analysis of two types of winding arrangements for a three-phase 12/8 switched reluctance motor (SRM), where short- and fully-pitched winding arrangements under unipolar operation are considered. From...

(This article belongs to the Special Issue Energy Efficiency Improvement of Electric Machines without Rare-Earth Magnets)
  • Article
  • Open Access
1 Citations
3,846 Views
25 Pages

A Spintronic 2M/7T Computation-in-Memory Cell

  • Atousa Jafari,
  • Christopher Münch and
  • Mehdi Tahoori

Computing data-intensive applications on the von Neumann architecture lead to significant performance and energy overheads. The concept of computation in memory (CiM) addresses the bottleneck of von Neumann machines by reducing the data movement in t...

  • Article
  • Open Access
798 Views
17 Pages

28 August 2026

Parallel Delta robots are widely used in high-speed industrial automation, particularly in food-processing operations that require short cycle times and precise manipulation. Their performance under complex loading conditions, however, remains critic...

(This article belongs to the Special Issue Integrating Robotics into High-Accuracy Industrial Operations, 2nd Edition)
  • Article
  • Open Access
9 Citations
6,417 Views
21 Pages

28 October 2016

The articulated torque is an important base for developing heavy-duty multi-legged robots. To quickly obtain accurate articulated torques, a method is presented for an electrically driven heavy-duty six-legged robot under its quadrangular gait. First...

  • Article
  • Open Access
984 Views
18 Pages

16 October 2025

This paper presents a design of spring static-balanced manipulators for reduced spring attachment adjustments. Gravitational joint torque is balanced by spring torque to maintain static balance, but joint reaction force by gravity force and spring fo...

(This article belongs to the Section Robotics, Mechatronics and Intelligent Machines)
  • Article
  • Open Access
29 Citations
7,007 Views
13 Pages

Correlation between Implant Geometry, Bone Density, and the Insertion Torque/Depth Integral: A Study on Bovine Ribs

  • Danilo Alessio Di Stefano,
  • Paolo Arosio,
  • Vittoria Perrotti,
  • Giovanna Iezzi and ,
  • Antonio Scarano and
  • Adriano Piattelli
  • + 1 author+ 0 author

5 March 2019

During insertion of dental implants, measurement of dynamic parameters such as the torque-depth curve integral or insertion energy might convey more information about primary stability than traditional static parameters such as the insertion or remov...

  • Article
  • Open Access
3 Citations
3,008 Views
20 Pages

Acute Effects of Sedentary Behavior on Ankle Torque Assessed with a Custom-Made Electronic Dynamometer

  • Iulia Iovanca Dragoi,
  • Florina Georgeta Popescu,
  • Teodor Petrita,
  • Florin Alexa and ,
  • Sorin Barac,
  • Cosmina Ioana Bondor,
  • Elena-Ana Pauncu,
  • Frank L. Bowling,
  • Neil D. Reeves and
  • Mihai Ionac
  • + 5 authors+ 0 author

28 April 2022

Inactivity negatively influences general health, and sedentary behaviour is known to impact the musculoskeletal system. The aim of the study was to assess the impact of time spent in active and sedentary behaviour on foot muscle strength. In this obs...

(This article belongs to the Special Issue Physical Activity, Exercise Testing and Clinical Assessment in Sports Medicine)
  • Article
  • Open Access
30 Citations
5,755 Views
13 Pages

Study on Aerodynamic Characteristics of a Savonius Wind Turbine with a Modified Blade

  • Zhongqiu Mu,
  • Guoqiang Tong,
  • Zhenjun Xiao,
  • Qingyue Deng and ,
  • Fang Feng,
  • Yan Li and
  • Garrel Van Arne
  • + 2 authors+ 0 author

12 September 2022

In order to improve the static start-up problem of Savonius wind turbines, a Savonius wind turbine with a modified blade is proposed. It was obtained by twisting the half-cylindrical blades of the basic Savonius wind turbine by 70°. The aerodynamic p...

  • Article
  • Open Access
9 Citations
2,185 Views
14 Pages

25 September 2024

Magnetorheological fluids (MRFs) are functional fluids that exhibit rapid and reproducible rheological responses to external magnetic fields. An MRF has been utilized to develop a haptic device with precise haptic feedback for teleoperative surgical...

(This article belongs to the Special Issue Magnetorheological Materials and Application Systems)
  • Article
  • Open Access
10 Citations
6,715 Views
21 Pages

1 August 2024

Dual–motor drive is commonly used in heavy–duty robotic joint servo systems. However, the backlash inevitably affects joint accuracy. In this article, a variable bias torque control method is proposed for a dual–motor–driven r...

(This article belongs to the Section Actuators for Robotics)
  • Article
  • Open Access
4 Citations
3,150 Views
23 Pages

Study of Novel Oil-Immersed Torque Motor for Two-Dimensional Valve

  • Yiming You,
  • Jiantao Zhao,
  • Zhankai Song,
  • Jian Ruan and
  • Sheng Li

2 March 2023

The electro-mechanical converters of valves are mostly dry type, which cannot work for a long time under high currents due to heat dissipation. This paper presents a novel oil-immersed torque motor (OTM) that can carry out the 2D motion. The OTM has...

(This article belongs to the Section Electrical Machines and Drives)
  • Article
  • Open Access
587 Views
18 Pages

5 May 2026

To address insufficient dynamic reactive power support during large-scale new energy grid connection, synchronous condensers are widely used in centralized new energy delivery. As a special rotating electrical machine, their operational stability is...

  • Article
  • Open Access
16 Citations
6,099 Views
19 Pages

Different Conical Angle Connection of Implant and Abutment Behavior: A Static and Dynamic Load Test and Finite Element Analysis Study

  • Győző Körtvélyessy,
  • Árpád László Szabó,
  • István Pelsőczi-Kovács,
  • Tamás Tarjányi and ,
  • Zsolt Tóth,
  • Krisztina Kárpáti,
  • Danica Matusovits,
  • Botond Dávid Hangyási and
  • Zoltán Baráth
  • + 4 authors+ 0 author

28 February 2023

Dental implants are artificial dental roots anchoring prosthetic restorations to replace natural teeth. Dental implant systems may have different tapered conical connections. Our research focused on the mechanical examination of implant–superst...

(This article belongs to the Special Issue Dental Materials in Modern and Contemporary Implant Dentistry)
  • Article
  • Open Access
360 Views
23 Pages

Biomechanical Validation and Torque Enhancement of a BLDC-Driven Active Ankle Prosthesis for Walking and Stair Locomotion

  • Sayat Akhmejanov,
  • Cristian Copilusi,
  • Kassymbek Ozhikenov,
  • Nursultan Zhetenbayev and
  • Gani Sergazin

Background/Objectives: Lower-limb impairment can alter ankle-joint motion and reduce functional mobility during demanding locomotor tasks such as stair ascent and descent. This study presents the development and preliminary proof-of-concept evaluatio...

(This article belongs to the Section Injury Biomechanics and Rehabilitation)
  • Article
  • Open Access
6 Citations
5,145 Views
10 Pages

Acute Static Stretching Results in Muscle-Specific Alterations amongst the Hamstring Muscles

  • Manon Riccetti,
  • Jules Opplert,
  • Joao L. Q. Durigan,
  • Carole Cometti and
  • Nicolas Babault

30 August 2020

This study aimed to explore the acute effects of static stretching on the musculotendinous properties of two hamstring muscles. Twelve male volunteers underwent two testing sessions. One session was dedicated to the evaluation of the semitendinosus m...

  • Review
  • Open Access
19 Citations
17,569 Views
31 Pages

2 November 2023

The aim of this review was to provide an overview of the recent findings on the acute and chronic effects of static stretching on joint behaviors and neuromuscular responses and to discuss the overall effects of acute and chronic static stretching on...

(This article belongs to the Special Issue Sports and Exercise Rehabilitation)
  • Article
  • Open Access
347 Views
23 Pages

13 October 2026

Humanoid redesign with existing actuators requires balancing torque gain against loaded joint speed and holding duration. This study applies quasi-static load and torque–speed models to three generations of a 134 cm humanoid and measures the de...

(This article belongs to the Section Robotics and Automation)
  • Article
  • Open Access
4,860 Views
9 Pages

Primary Stability of Temporary Screws after Dentary and Orthopedic Forces under Static and Dynamic Load Cycles

  • Daniel J. Fernandes,
  • Flavia A. Barbosa,
  • Ligia M. Ferreira and
  • Carlos N. Elias

3 March 2017

The objective was to analyze the influence of dentary and orthopedic forces under static and dynamic loads in temporary screw stability. Self-drilling titanium (Ti6Al4V) screws (6 × 1.5 mm) were inserted and removed from pig ribs. Screws were loaded...

(This article belongs to the Special Issue Advances in Enhancing Degradation Resistance of Metallic Implants by Surface Engineering)
  • Article
  • Open Access
13 Citations
4,074 Views
16 Pages

Design Optimization of a Switched Reluctance Machine with an Improved Segmental Rotor for Electric Vehicle Applications

  • Yuanfeng Lan,
  • Mohamed Amine Frikha,
  • Julien Croonen,
  • Yassine Benômar and ,
  • Mohamed El Baghdadi and
  • Omar Hegazy
  • + 1 author+ 0 author

9 August 2022

In this article, a switched reluctance machine (SRM) with six phases and a misaligned segmental rotor is proposed. The segmental rotor has an internal 15-degree misalignment, allowing the SRM structure to be a one-layer 2D structure with a short flux...

(This article belongs to the Topic Advanced Electrical Machines and Drives Technologies)
  • Article
  • Open Access
13 Citations
3,296 Views
15 Pages

21 March 2023

The excessive burning of the fossil fuels has excessively changed the global temperature in the last few decades. The global warming caused due to the burning of the fossil fuels has initiated a need of increasing the use of renewal energy sources. T...

(This article belongs to the Special Issue Renewable Energy and Greenhouse Gas Emissions Reduction)
  • Communication
  • Open Access
8 Citations
7,141 Views
14 Pages

7 June 2021

A torque measurement method that combines the inverse magnetostrictive effect with twist angle measurement has been proposed in this paper. A Kalman filter and complementary filter are applied to significantly reduce the noises and errors in the prop...

(This article belongs to the Special Issue New Design and Applications for Magnetoelastic Actuators)
  • Article
  • Open Access
6 Citations
3,638 Views
19 Pages

Permanent magnet couplings can convert a dynamic seal into a static seal, thereby greatly improving the stability of the underwater propulsion unit. In order to make full use of the tail space and improve the transmitted torque capability, a conical...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
12 Citations
9,933 Views
25 Pages

The Design, Analysis, and Verification of an Axial Flux Permanent Magnet Motor with High Torque Density

  • Dapeng Quan,
  • Caiting He,
  • Chenyuan Li,
  • Zeming Zhao and ,
  • Xiaoze Yang,
  • Limei Ma,
  • Mingyang Li,
  • Yong Zhao and
  • Hongtao Wu
  • + 4 authors+ 0 author

18 March 2025

Aiming at the defects of long axial size and low torque density of the existing radial flux permanent magnet motor, this paper proposes an axial flux permanent magnet synchronous motor (AFPMM) with a double-stator and single-rotor structure based on...

  • Article
  • Open Access
1,059 Views
25 Pages

Investigation on Rolling Seals for Deep-Sea Applications

  • Yucheng Yang,
  • Limin Gao,
  • Yafeng Wu,
  • Guojun Wu and
  • Geyang Hao

The rolling seal is a pivotal sealing technology for marine equipment such as wet-mateable connectors, ensuring operational integrity in deep-sea environments during both static and mating phases. However, its working mechanisms remain inadequately u...

of 8