Skip to Content

91 Results Found

  • Article
  • Open Access
3 Citations
3,144 Views
9 Pages

Critical Current and Pinning Features of a CaKFe4As4 Polycrystalline Sample

  • Armando Galluzzi,
  • Antonio Leo,
  • Andrea Masi,
  • Francesca Varsano and ,
  • Angela Nigro,
  • Gaia Grimaldi and
  • Massimiliano Polichetti
  • + 2 authors+ 0 author

3 November 2021

We analyze the magnetic behavior of a CaKFe4As4 polycrystalline sample fabricated by a mechanochemically assisted synthesis route. By means of DC magnetization (M) measurements as a function of the temperature (T) and DC magnetic field (H) we study i...

(This article belongs to the Special Issue Challenges and Opportunities of Superconducting Materials for Future Applications)
  • Article
  • Open Access
3 Citations
3,328 Views
18 Pages

10 June 2020

The initial axial forces of members—whatever caused by prestress or external loads—may strongly change the mechanical properties of pin-jointed bar assemblies, to enhance, or even establish their structural stiffness. The structural respo...

  • Article
  • Open Access
2 Citations
14,452 Views
12 Pages

Full-Body Kinematics and Vertical Ground Reaction Forces in Elite Ten-Pin Bowling: A Field Study

  • Bo Eitel Seiferheld,
  • Jeppe Frost,
  • Thorstein Brynildsen Østergaard,
  • Mathias Sønder Krog and ,
  • Kent Kongsøre Klitgaard and
  • Mark de Zee
  • + 1 author+ 0 author

7 October 2023

The purpose was to investigate full-body kinematics and vertical ground reaction forces in the lower extremities of the delivery and to determine delivery changes over time after many deliveries in ten-pin bowling. Six male elite ten-pin bowlers comp...

(This article belongs to the Special Issue Wearable Sensors for Human Movement Analysis Related to Biomechanics and Exercise Physiology)
  • Article
  • Open Access
22 Citations
6,736 Views
18 Pages

10 August 2022

The current loaded tooth contact analysis of cycloid drives based on the assumption of theoretical positions of ring pins ignores the deviations caused by manufacturing errors and elastic deformations, which are not in agreement with reality. To fill...

(This article belongs to the Special Issue Design Methods for Mechanical and Industrial Innovation)
  • Article
  • Open Access
5 Citations
3,717 Views
11 Pages

Microstructure and Flux Pinning of Reacted-and-Pressed, Polycrystalline Ba0.6K0.4Fe2As2 Powders

  • Michael R. Koblischka,
  • Anjela Koblischka-Veneva,
  • Jörg Schmauch and
  • Masato Murakami

6 July 2019

The flux pinning properties of reacted-and-pressed Ba0.6K0.4Fe2As2 powder were measured using magnetic hysteresis loops in the temperature range 20 K ≤ T ≤ 35 K. The scaling analysis of the flux pinning forces ( F p = j c × B ,...

(This article belongs to the Special Issue Engineering Properties of Superconducting Materials)
  • Article
  • Open Access
8 Citations
4,744 Views
14 Pages

Experimental & FEM Analysis of Orthodontic Mini-Implant Design on Primary Stability

  • Elmedin Mešić,
  • Enis Muratović,
  • Lejla Redžepagić-Vražalica,
  • Nedim Pervan and ,
  • Adis J. Muminović,
  • Muamer Delić and
  • Mirza Glušac
  • + 2 authors+ 0 author

12 June 2021

The main objective of this research is to establish a connection between orthodontic mini-implant design, pull-out force and primary stability by comparing two commercial mini-implants or temporary anchorage devices, Tomas®-pin and Perfect Anchor. Mi...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Article
  • Open Access
30 Citations
6,517 Views
23 Pages

11 March 2019

This paper proposes a soft robot hand with pin-array structure and self-adaptive function, CTSA-II hand, where CTSA is the Cluster tube self-adaption. The CTSA-II hand is designed with a quite concise structure and consists of bases, a pin array, a s...

(This article belongs to the Special Issue Soft Robotics: New Design, Control, and Application)
  • Article
  • Open Access
18 Citations
6,378 Views
14 Pages

1 October 2018

This paper presents the effect of through-thickness reinforcement by steel z-pins on the interlaminar shear properties and strengthening mechanisms of carbon fiber reinforced aluminum matrix composites (Cf/Al) with a short beam shear test method. Mic...

(This article belongs to the Special Issue Structure and Mechanical Properties of Transition Group Metals, Alloys, and Intermetallic Compounds)
  • Article
  • Open Access
8 Citations
1,642 Views
16 Pages

Design and Tests of a Large-Opening Flexible Seedling Pick-Up Gripper with Multiple Grasping Pins

  • Luhua Han,
  • Meijia Zhang,
  • Yan Wang,
  • Guoxin Ma and ,
  • Qizhi Yang and
  • Yang Liu
  • + 1 author+ 0 author

4 July 2025

The pick-up gripper, as a core component of automatic transplanting systems, presents challenges in reliably grasping seedlings. In this study, a large-opening flexible seedling pick-up gripper was designed based on standard trays and seedling charac...

(This article belongs to the Section Precision and Digital Agriculture)
  • Article
  • Open Access
7 Citations
6,856 Views
20 Pages

25 July 2023

Due to the advantages of high transmission accuracy and high impact resistance, cycloid-pin gear drives are widely used in precision machinery. In the actual manufacturing and use process, a suitable clearance must be left between the cycloid gear an...

(This article belongs to the Special Issue Research on Rotor Dynamics and Vibration Control)
  • Article
  • Open Access
8 Citations
3,168 Views
16 Pages

A Finite Element Model for Predicting the Static Strength of a Composite Hybrid Joint with Reinforcement Pins

  • Francesco Bianchi,
  • Yiding Liu,
  • Adam M. Joesbury,
  • David Ayre and
  • Xiang Zhang

22 April 2023

This paper presents a finite element model for predicting the performance and failure behaviour of a hybrid joint assembling fibrous composites to a metal part with reinforcement micro pins for enhancing the damage tolerance performance. A unit-strip...

  • Article
  • Open Access
1 Citations
3,249 Views
21 Pages

11 July 2023

Joints connect prefabricated hollow-core slabs, the key elements of force transmission of hollow-core slab bridges. The joints are easily damaged, which affects the integrity and safety of the hollow-core slab bridge. This paper uses MIDAS FEA NX fin...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
18 Citations
5,634 Views
14 Pages

Experimental Validation of an FSW Model with an Enhanced Friction Law: Application to a Threaded Cylindrical Pin Tool

  • Narges Dialami,
  • Miguel Cervera,
  • Michele Chiumenti,
  • Antonio Segatori and
  • Wojciech Osikowicz

10 November 2017

This work adopts a fast and accurate two-stage computational strategy for the analysis of FSW (Friction stir welding) processes using threaded cylindrical pin tools. The coupled thermo-mechanical problem is equipped with an enhanced friction model to...

(This article belongs to the Special Issue Recent Achievements in Rotary, Linear and Friction Stir Welding of Metals Alloys)
  • Article
  • Open Access
10 Citations
2,684 Views
14 Pages

The Effect of Various Contaminants on the Surface Tribological Properties of Rail and Wheel Materials: An Experimental Approach

  • Rabesh Kumar Singh,
  • Mahesh Shindhe,
  • Prashant Rawat,
  • Ashish Kumar Srivastava and ,
  • Gyanendra Kumar Singh,
  • Rajesh Verma,
  • Javed Khan Bhutto and
  • Hany S. Hussein
  • + 3 authors+ 0 author

5 March 2023

This study reports on the tribological behavior of Indian rail track and wheel materials under different contaminants. A pin-on-disc tribometer was selected for the experimental analysis in ambient conditions (temperature of 24.9 °C and relative...

(This article belongs to the Special Issue Research Progress of Metals and Alloys by Thermal Layering and Deposition)
  • Feature Paper
  • Article
  • Open Access
12 Citations
3,114 Views
12 Pages

High Pinning Force Values of a Fe(Se, Te) Single Crystal Presenting a Second Magnetization Peak Phenomenon

  • Armando Galluzzi,
  • Krastyo Buchkov,
  • Vihren Tomov,
  • Elena Nazarova and ,
  • Antonio Leo,
  • Gaia Grimaldi and
  • Massimiliano Polichetti
  • + 2 authors+ 0 author

10 September 2021

The magnetization M of an Fe(Se, Te) single crystal has been measured as a function of temperature T and dc magnetic field H. The sample properties have been analyzed in the case of a magnetic field parallel to its largest face H||ab. From the M(T) m...

(This article belongs to the Special Issue Synthesis, Design, Characterization of Unconventional Superconducting Materials)
  • Article
  • Open Access
3 Citations
2,688 Views
13 Pages

Study of the Static Performance of Guyed Towers in High-Voltage Transmission Lines

  • Haoyuan Chen,
  • Yongan Wang,
  • Hong Yin,
  • Liwei Xia and ,
  • Hengbang Wan,
  • Musoke Paul Kalungi and
  • Aizhu Zhu
  • + 2 authors+ 0 author

13 December 2024

Guyed towers in high-voltage transmission lines consist of the tower body, guy wire system, and foundation. A well-designed guy wire system with optimized tension levels is essential to maintain the stability of the tower under wind loads and other e...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
20 Citations
8,585 Views
14 Pages

3 July 2019

This paper presents the numerical simulation of the Friction stir welding (FSW) process obtained by using the DEFORM 3D software package. Numerical simulations are based on experimental research, welding of aluminum alloy AA6082-T6 by FSW method, whi...

  • Article
  • Open Access
25 Citations
11,076 Views
19 Pages

18 April 2021

This study shows the performance of heat sinks (HS) with different designs under forced convection, varying geometric and boundary parameters, via computational fluid dynamics simulations. Initially, a complete and detailed analysis of the thermal pe...

(This article belongs to the Special Issue Additive Manufacturing Materials and Their Applications)
  • Article
  • Open Access
1 Citations
1,472 Views
21 Pages

14 September 2025

This paper presents a static-strength analysis of the construction of folding bridges, addressing in particular the dimensioning of pin connections. These connections are elements that transfer the axial forces between the chords of truss girders of...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
6 Citations
3,562 Views
14 Pages

22 November 2021

The article presents an analysis of the impact of a malfunction resulting from excessive clearance on the rocker arm pin of the front suspension on the vehicle’s steerability. The first part of the article presents an analysis of the influence...

(This article belongs to the Special Issue Vehicle and Traffic Safety)
  • Article
  • Open Access
15 Citations
3,844 Views
19 Pages

12 October 2021

This paper presents a study of penetrating a pin into a magnetorheological fluid (MR) cushion focused on the force measurement. The research is supported by detailed finite element analysis (FEA) of the magnetic field distributions in several magneti...

(This article belongs to the Special Issue Numerical Computations in Modeling, Analysis and Optimization of Energy Conversion in Electromagnetic Devices, Electrical Machines and Drives)
  • Article
  • Open Access
4 Citations
4,157 Views
17 Pages

Contact Analysis for Cycloid Pinwheel Mechanism by Isogeometric Finite Element

  • Ke Zhang,
  • Caixia Guo,
  • Yutao Li,
  • Yuewen Su and ,
  • Bodong Zhang and
  • Peihu Gao
  • + 1 author+ 0 author

30 November 2023

Cycloid drives are generally used in precision machinery requiring high-reduction ratios, such as robot joint (RV) reducers. The contact stress of cycloidal gears greatly affects lifetime and transmission performance. Traditional finite element metho...

(This article belongs to the Special Issue Structural, Mechanical and Tribological Properties of Hard Coatings)
  • Article
  • Open Access
20 Citations
3,833 Views
13 Pages

Effects of Friction Stir Welding Process Control and Tool Penetration on Mechanical Strength and Morphology of Dissimilar Aluminum-to-Polymer Joints

  • Arménio N. Correia,
  • Paulo A. M. Santos,
  • Daniel F. O. Braga,
  • Ricardo Baptista and
  • Virgínia Infante

An engineering grade polymer—glass fiber-reinforced polyphenylene ether blended with polystyrene—and an aluminum alloy—AA6082-T6—were joined by friction stir welding in an overlap configuration. A comprehensive analysis was co...

(This article belongs to the Special Issue Frontiers in Friction Stir Welding and Processing)
  • Article
  • Open Access
3 Citations
8,070 Views
18 Pages

30 December 2021

Pin joints are widely used mechanisms in different industrial machineries such as aircrafts, cranes, ships, and offshore drilling equipment providing a joint with possibility of relative rotation about one single axis. The rigidity of the joint and i...

  • Article
  • Open Access
1 Citations
686 Views
23 Pages

28 March 2026

By adding Ce to high-strength low-alloy steel, the effects of heating parameters and Ce on grain growth were examined through in situ observation and dynamic analysis of grain growth behavior during heating, combined with precipitated phase analysis...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
1 Citations
998 Views
14 Pages

Design and Research of Superimposed Force Sensor

  • Genshang Wu,
  • Jinggan Shao,
  • Yicun Xu,
  • Zhanshu He and
  • Shifei Liu

22 September 2025

The measurement accuracy and equipment stability of superposition-type force sensors are primarily influenced by the layout and number of individual force sensors. Analyzing this impact effect through experimental testing for each configuration would...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
7 Citations
3,128 Views
16 Pages

Simulation of Thermomechanical Coupling and Evaluation of the Fire Resistance for the Joints of Fabricated Frame Tunnel

  • Zhen Huang,
  • Jiawei Zhang,
  • Zimao Peng,
  • Hongbo Hu and ,
  • Huiping An,
  • Xulong Yang and
  • Tianxiang Xiong
  • + 2 authors+ 0 author

21 December 2022

Fire in a tunnel will deteriorate the mechanical properties of the tunnel. For fabricated tunnels formed by splicing prefabricated components through joints, under the high temperature of a fire, the rapid degradation of the bearing capacity of the j...

(This article belongs to the Special Issue Advance in Tunnel Fire Research)
  • Article
  • Open Access
5 Citations
1,971 Views
19 Pages

25 June 2024

In order to explore the influence of high-order micro-texture parameters on the friction, wear, and vibration characteristics of coated cemented carbide pin surfaces, expand the research field of textured coating modification processes. Firstly, a la...

(This article belongs to the Special Issue Oxidation, Wear, Corrosion Behaviors and Activated Bonding Properties of Coatings Deposited on Metals)
  • Article
  • Open Access
4 Citations
1,736 Views
18 Pages

12 November 2024

Large-scale superconductor applications necessitate a superconducting matrix with pinning sites (PSs) that immobilize vortices at elevated temperatures and magnetic fields. While previous works focused on the single addition of nanoparticles, the sim...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
23 Citations
4,319 Views
14 Pages

26 February 2022

In this paper, the effect of different shapes of tool pin on the plastic flow of 2024-T6 aluminum alloy during friction stir welding was studied. In order to observe the plastic flow of materials more clearly, we chose the method of friction stir wel...

(This article belongs to the Topic Development of Friction Stir Welding and Processing)
  • Proceeding Paper
  • Open Access
1 Citations
2,510 Views
7 Pages

Research on the Friction Properties of DP600 Stainless Steel as a Function of Bending Angle and Pin Diameter

  • Samuel Sanchez-Caballero,
  • Miguel A. Selles,
  • Rafael Pla-Ferrando,
  • Jesus Seguí and
  • Miguel A. Peydro

18 February 2021

The rapid evolution of materials and manufacturing processes, driven by global competition and new safety and environmental regulations has had an impact on automotive structures (Body In White; BIW) manufacturing. The need for lighter vehicles, with...

(This article belongs to the Proceedings of The 1st International Electronic Conference on Metallurgy and Metals)
  • Article
  • Open Access
7 Citations
3,135 Views
22 Pages

The Formation Mechanism of Residual Stress in Friction Stir Welding Based on Thermo-Mechanical Coupled Simulation

  • Tianlei Yang,
  • Xiao Wei,
  • Jiangfan Zhou,
  • Hao Jiang and ,
  • Xinyu Liu and
  • Zongzhe Man
  • + 1 author+ 0 author

10 June 2025

Friction Stir Welding (FSW) is widely used for high-strength aluminum alloys due to its solid-state bonding, which ensures superior weld quality and service stability. However, thermo-mechanical interactions during welding can induce complex residual...

(This article belongs to the Special Issue Symmetry in Impact Mechanics of Materials and Structures)
  • Article
  • Open Access
2 Citations
2,945 Views
17 Pages

7 August 2021

Investigation of buckling under tension is highly important from theoretical and practical viewpoints to ensure safety and the proper performance of mechanical systems. In the present work, tensile buckling is investigated experimentally, and the cri...

  • Article
  • Open Access
18 Citations
8,424 Views
12 Pages

Shape and Site Dependent in Vivo Degradation of Mg-Zn Pins in Rabbit Femoral Condyle

  • Pei Han,
  • Moyan Tan,
  • Shaoxiang Zhang,
  • Weiping Ji and ,
  • Jianan Li,
  • Xiaonong Zhang,
  • Changli Zhao,
  • Yufeng Zheng and
  • Yimin Chai
  • + 4 authors+ 0 author

20 February 2014

A type of specially designed pin model of Mg-Zn alloy was implanted into the full thickness of lesions of New Zealand rabbits’ femoral condyles. The recovery progress, outer surface healing and in vivo degradation were characterized by various method...

(This article belongs to the Special Issue Biodegradable Magnesium Alloys and Implants)
  • Article
  • Open Access
25 Citations
4,714 Views
10 Pages

Impact of Implant Design and Bone Properties on the Primary Stability of Orthodontic Mini-Implants

  • Lejla Redžepagić-Vražalica,
  • Elmedin Mešić,
  • Nedim Pervan,
  • Vahidin Hadžiabdić and ,
  • Muamer Delić and
  • Mirza Glušac
  • + 1 author+ 0 author

28 January 2021

This study investigated the correlation between bone characteristics, the design of orthodontic mini-implants, the pull-out force, and primary stability. This experimental in vitro study has examined commercial orthodontic mini-implants of different...

  • Article
  • Open Access
364 Views
23 Pages

Finite Element Analysis of the Load-Bearing Components of a Stackable Surgical Guide System During Flapless Implant Osteotomy in a Fully Edentulous Maxilla

  • Ionut Gabriel Ghionea,
  • Corina Marilena Cristache,
  • Stefan Cristian Dumitru,
  • Cristian Ioan Tarba and ,
  • Oana Elena Burlacu Vatamanu and
  • Irina Adriana Beuran
  • + 1 author+ 0 author

25 September 2026

Stackable surgical templates enable flapless, prosthetically driven implant placement and immediate provisionalization in full-arch rehabilitation; however, intraoperative guide fracture remains a recognized complication, and the biomechanical behavi...

(This article belongs to the Special Issue Advanced Materials for Dentistry and Maxillofacial Prosthodontics: From Biocompatibility to Biomimetic Design and Implant Surface Bioengineering)
  • Article
  • Open Access
62 Citations
6,565 Views
20 Pages

In this study, tribological properties of custom formulated and stabilized nano lubricant are investigated. Spherical CuO nanoparticles are suspended in 20W-50 mineral base lubricant using Oleic Acid (OA) as a surfactant. Three different nano lubrica...

  • Article
  • Open Access
158 Views
26 Pages

Linking Stoichiometry, Chemical Pressure, and Domain Structure in the van der Waals Ferrielectric CuInP2S6

  • Dávid Gál,
  • Sándor Lenk,
  • István Rigó,
  • Miklós Veres and ,
  • László Péter,
  • Anton Kohutych,
  • Konstantin Glukhov,
  • Nyomó Dominika and
  • Alexander Molnar
  • + 4 authors+ 0 author

22 October 2026

The ferrielectric properties of layered CuInP2S6 (CIPS) are highly sensitive to stoichiometry and growth-induced defects. Here we systematically compare crystals grown by chemical vapor transport and the Bridgman–Stockbarger method with Cu- and...

(This article belongs to the Section 2D and Carbon Nanomaterials)
  • Article
  • Open Access
9 Citations
5,945 Views
26 Pages

Design and Analysis of a Novel Floating Docking Mechanism for On-Orbit Refueling

  • Zhicheng Sun,
  • Shipeng Li,
  • Huan Zhang,
  • Haiming Lei and
  • Xiaodong Song

The docking mechanism is a key component for on-orbit refueling technology. In this paper, the design and analysis of a novel floating docking mechanism for on-orbit berthing-based refueling is presented. Compared with traditional berthing and dockin...

(This article belongs to the Special Issue Recent Advances in Spacecraft Dynamics and Control)
  • Article
  • Open Access
31 Citations
5,313 Views
15 Pages

15 May 2018

Arc discharges of a pure carbon strip induced by dynamic contact force were studied on a pin-on-disk tribometer. It was found that arc discharges were produced periodically in accordance with the period of the dynamic contact force. The arcing rate o...

(This article belongs to the Section Carbon Materials)
  • Article
  • Open Access
8 Citations
2,985 Views
18 Pages

Cometal Addition Effect on Superconducting Properties and Granular Behaviours of Polycrystalline FeSe0.5Te0.5

  • Manasa Manasa,
  • Mohammad Azam,
  • Tatiana Zajarniuk,
  • Ryszard Diduszko and ,
  • Tomasz Cetner,
  • Andrzej Morawski,
  • Andrzej Wiśniewski and
  • Shiv J. Singh
  • + 3 authors+ 0 author

5 April 2023

The enhanced performance of superconducting FeSe0.5Te0.5 materials with added micro-sized Pb and Sn particles is presented. A series of Pb- and Sn-added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0–0.1) bulks are fabricated by the solid-st...

(This article belongs to the Special Issue Novel Superconducting Materials and Applications of Superconductivity)
  • Article
  • Open Access
24 Citations
9,758 Views
30 Pages

Material Characterization and Influence of Sliding Speed and Pressure on Friction and Wear Behavior of Self-Lubricating Bearing Materials for Hydropower Applications

  • Maria Rodiouchkina,
  • Kim Berglund,
  • Johanne Mouzon,
  • Fredrik Forsberg and ,
  • Faiz Ullah Shah,
  • Ilia Rodushkin and
  • Roland Larsson
  • + 2 authors+ 0 author

Nowadays, hydropower plants are forced to have more frequent power control and the self-lubricated bearings used in the applications are one of the most critical components affected by the continuously changing operating conditions. In this study, mi...

  • Article
  • Open Access
25 Citations
8,004 Views
20 Pages

Numerical Simulation of Material Flow and Analysis of Welding Characteristics in Friction Stir Welding Process

  • Haitao Luo,
  • Tingke Wu,
  • Peng Wang,
  • Fengqun Zhao and ,
  • Haonan Wang and
  • Yuxin Li
  • + 1 author+ 0 author

28 May 2019

Friction stir welding (FSW) material flow has an important influence on weld formation. The finite element model of the FSW process was established. The axial force and the spindle torque of the welding process were collected through experiments. The...

(This article belongs to the Special Issue Characterization of Welded Joints)
  • Article
  • Open Access
3 Citations
2,613 Views
28 Pages

2 September 2022

In large metal civil constructions (stadium roofs, bridges), slender bars can lose their stability under compression loading. There is a lack in the literature regarding design solutions and methods for increasing the critical buckling force of bars...

(This article belongs to the Special Issue Testing of Materials and Elements in Civil Engineering (2nd Edition))
  • Article
  • Open Access
5 Citations
3,184 Views
13 Pages

The AA6082-T6 and AA5754-H22 aluminium alloys were selected as the base materials to fabricate similar and dissimilar friction stir lap welds. Three lap configurations, AA6082/AA5754, AA5754/AA6082 and AA6082/AA6082, were produced using three pin pro...

  • Article
  • Open Access
10 Citations
2,703 Views
19 Pages

Research on Pipeline Stress Detection Method Based on Double Magnetic Coupling Technology

  • Guoqing Wang,
  • Qi Xia,
  • Hong Yan,
  • Shicheng Bei and ,
  • Huakai Zhang,
  • Hao Geng and
  • Yuhan Zhao
  • + 2 authors+ 0 author

7 October 2024

Oil and gas pipelines are subject to soil corrosion and medium pressure factors, resulting in stress concentration and pipe rupture and explosion. Non-destructive testing technology can identify the stress concentration and defect corrosion area of t...

(This article belongs to the Special Issue Artificial Intelligence and Sensor-Enhanced Fault Diagnosis for Industrial Application)
  • Article
  • Open Access
1 Citations
1,080 Views
27 Pages

Over the course of long-term operation, wear to moving parts can significantly affect the dynamic behavior, reliability and service life of landing gear retraction and extension systems. The primary innovation of this paper is the proposal of a multi...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
6 Citations
3,560 Views
11 Pages

Electric Field Assisted Self-Assembly of Viruses into Colored Thin Films

  • James J. Tronolone,
  • Michael Orrill,
  • Wonbin Song,
  • Hyun Soo Kim and ,
  • Byung Yang Lee and
  • Saniya LeBlanc
  • + 1 author+ 0 author

13 September 2019

Filamentous viruses called M13 bacteriophages are promising materials for devices with thin film coatings because phages are functionalizable, and they can self-assemble into smectic helicoidal nanofilament structures. However, the existing “pu...

  • Article
  • Open Access
177 Views
30 Pages

27 October 2026

Stone pitching and other finishing works on steep infrastructure slopes (45–60°) are still commonly executed by workers standing on the inclined surface. This paper assesses a modular system of aluminium stringers resting on the slope and h...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
1 Citations
1,774 Views
10 Pages

Dependence of Electrical Charge Transport on the Voltage Applied across Metal–Graphene–Metal Stack under Fixed Compressing Force

  • Tomas Daugalas,
  • Virginijus Bukauskas,
  • Algimantas Lukša,
  • Viktorija Nargelienė and
  • Arūnas Šetkus

30 August 2023

While charge transport in the horizontal plane of graphene has been widely studied, there is only limited understanding about the transport across a stack of films that include graphene sheets. In this report, a model of a metal–graphene–...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)

of 2