- Article
When modelling the anchorage performance of rebars with the tri-linear law, the calculation process of the load–deformation relation is complicated. The reason is that when the rebar–grout interface entered the elastic–softening&nda...
When modelling the anchorage performance of rebars with the tri-linear law, the calculation process of the load–deformation relation is complicated. The reason is that when the rebar–grout interface entered the elastic–softening&nda...
In order to explore the flexural behavior of a concrete sandwich panel under concentrated boundary conditions, based on Kirachhoff’s elastic thin plate theory in this paper, the geometric deformation, physical conditions, and equilibrium relati...
27 September 2022
The number of occasions to stay in a car overnight is increasing during disasters; however, the effects on sleep and the impact on daytime functioning are not well understood. We investigated the effect of seat angle when sleeping in a car and its im...
The efficient, low-cost, and large-scale development and utilization of offshore wind energy resources is an inevitable trend for future growth. With the continuous increase in the scale of wind turbines and their expansion into deep-sea locations, t...
A simplified calculation method is evaluated to calculate the static performance of an aerostatic journal bearing with multiple orifice-type restrictors. This method adopts a one-dimension flow assumption and is a fast calculation method to design jo...
A total of five ultra-high-performance concrete (UHPC)-strengthened reinforced concrete (RC) columns and one RC column were built and subjected to eccentric compression testing to examine the force performance of UHPC-strengthened eccentrically compr...
This paper aims to study the influence of key design parameters (e.g., reinforcement ratio, cover thickness, stud spacing, and thickness of the ultra-high-performance concrete (UHPC) layer) on the longitudinal and transverse bending performance, as w...
The square steel tube–timber–concrete composite L-shaped columns are lighter in weight due to the inclusion of wood and exhibit superior seismic performance. This combination not only reduces transportation and labor costs but also enhanc...
In order to calculate heat transfer capacity and air-side pressure drop of an annular radiator (AR), one performance calculation method was proposed combining heat transfer unit (HTU) simulation and plate-and-fin heat exchanger (PFHX) performance cal...
This paper presents an analytical method to determine various main parameters or performances of engine components when those parameters cannot be directly measured and it is necessary to determine them. Additionally, some variants of instrumentation...
Thermodynamic design methods and performance calculation models for chemical reformers that can be used to recuperate exhaust heat and to improve combustion quality are investigated in this paper. The basic structure of the chemical reformer is defin...
The presented self-developed high-precision contact friction test device conducts experimental research on the friction characteristics of concrete pavement. First, the error analysis of the test device is carried out. The structure shows that the te...
To prevent brittle damage and improve the post-earthquake rapid repair capability of beam-column connections, a precast reduced beam section (PRBS) connection joint that can be rapidly repaired under earthquake action was proposed in this study. Four...
Antenna design and optimization must ensure robust electrical performance, making its analysis a crucial step in all antenna design processes. Traditionally, this analysis involves setting up various cases after establishing the calculation model, co...
The power system is a nonlinear complicated system. For power system analysis problems, they are mainly based on nonlinear equations. In practical systems, the calculation speed of a specific problem is very important. For most classical power system...
The utilization of recycled aggregate (RCA) in preparing recycled concrete (RAC) is an effective measure to solve the increase in construction waste. Furthermore, applying RAC to flexural members is a viable practice. The addition of steel fiber to R...
The article presents a comprehensive asset management method. Here presented method aims to bridge the economic approach to asset management with the technical approach to road infrastructure life cycle, namely its resilience and performance. The pre...
The key performance parameters of proppant are mainly the crushing rate and fracture conductivity, which are usually evaluated using physical experimental methods. However, the testing method for fracture conductivity has limitations, such as its lon...
This paper presents a new improved approach to calculation of polytropic performance of centrifugal compressors. This rapid solution technique is based upon a constant efficiency, temperature-entropy polytropic path represented by cubic polynomials....
The performance of a thermoacoustic system that is composed of a looped tube, an engine stack, a cooler stack, and four heat exchangers, is numerically investigated. Each stack has narrow flow channels, is sandwiched by two heat exchangers, and is lo...
Diamond coring bits exhibit stable rock-breaking and coring processes as well as a long service life. However, when drilling in complex and challenging formations are characterized by high hardness, strong plasticity, and high abrasiveness, issues su...
This study establishes a refined numerical model of circular concrete-filled steel tube (CFST) columns using finite element software, and its effectiveness was verified through simulation of low-cycle reciprocating load tests. Based on this, a system...
Ester collectors have rapidly developed into the main flotation collectors for copper sulfide minerals since they were developed. In this study, the collecting performance of four collectors, O-isopropyl-N-ethyl thionocarbamate ester (IPETC), 3-penty...
Vortex generators are used to overturn the momentum of the flow in the boundary layer, thereby preventing flow separation, and are broadly used in aviation, wind power, heat exchange, and different fields. It has been determined that the capability o...
As one of the most widely used units in water cooling systems, the closed wet cooling towers (CWCTs) have two typical counter-flow constructions, in which the spray water flows from the top to the bottom, and the moist air and cooling water flow in t...
Explicit demand response plays a significant role in the future energy grid transition, as it involves end consumers in smart grid activities and, at the same time, exploits the potential of flexibility, giving the opportunity to grid operators to ac...
The unstable operation of a centrifugal pump under the gas-liquid two-phase condition seriously affects its performance and reliability. In order to study the gas phase distribution and the unsteady force in an impeller, based on the Euler-Euler hete...
Solar energy utilization in buildings can significantly contribute to energy savings and enhance on-site energy production. However, excessive solar gains may lead to overheating, thereby increasing cooling demands. Accurate calculation of sunlit and...
Nowadays, global warming is a big challenge for human beings; since the Kyoto Protocol became effective, greenhouse gas emissions have been an important environmental evaluation index in all industries. Construction is a big contributor to greenhouse...
In cold regions, the reduction in envelope thermal transmittance is often the dominant parameter in ensuring thermal comfort in buildings. However, countries in warmer climates have also adopted this same strategy, often neglecting other parameters t...
Concrete-encased concrete-filled steel tube (CFST) composite columns provide high bearing capacity, good seismic performance and an easier connection with arbitrary angle beams, which are widely used in high-rise buildings. Considering the high frequ...
The radiant heating and cooling (RHC) system is one of the important air-conditioning methods that simultaneously achieves indoor thermal comfort and building energy efficiency. It is characterized by utilizing low-grade energy sources to provide low...
The sky view factor (SVF) has an important role in the analysis of the urban micro-climate. A new vector-based SVF calculation tool was implemented in a free and open source Geographic Information System named OrbisGIS. Its accuracy and computational...
This study aimed to investigate the axial compression performance of concrete-filled circular-end aluminum tube (RECFAT) columns, utilizing four specimens with varying parameters such as cross-sectional aspect ratio and cross-sectional aluminum conte...
Computational models of sufficient quality are indispensable to quantitatively assess aircraft noise reduction measures. Within this study, a multi-level simulation framework is established in order to predict the environmental noise of holding appro...
In this paper, the calculation model and method of the lubrication performance of the thrust bearing, which considers the thermal bomb deformation, are constructed based on the working characteristics of the main pump thrust of the nuclear power plan...
To promote the industrial development of reinforced concrete engineering and enhance the construction quality of prefabricated buildings, an innovative partial prefabricated construction method is proposed in this paper, namely the prefabricated rein...
2 September 2022
Higher education institutions (HEIs) can be considered role models of small cities that contribute to the fight against climate change. Therefore, assessing their own carbon footprints (CFs) and drawing conclusions gives significance to this study. I...
Pre-bored grouted planted pile has been increasingly applied in infrastructure construction in soft soil areas in recent years owing to its high bearing performance, low construction disturbance, and reduced slurry discharge. However, the synergistic...
A novel control strategy that is based on iterative calculation of structural parameters is proposed for grid-connected inverter in this paper. The proposed strategy has a good dynamic performance, which makes it particularly suitable for the applica...
In this paper, imitation basalt compounds using red mud, fly ash or coal gangue as raw materials were designed and prepared with the help of thermodynamic calculations. Thermodynamic calculations were used to obtain the suitable chemical composition....
The nuclear reactor coolant pump (RCP) is the core piece of equipment of a nuclear power plant (NPP). The energy performance and internal flow characteristics of RCPs are revealed by effective measurement methods, which are helpful to understand the...
In this study, three prefabricated integral shear wall specimens with strength differences were constructed based on a real engineering project to investigate the impact of these strength disparities on the structural performance of shear walls. The...
Purpose: To evaluate the performance of traditional vergence formulas with segmented axial length (AL) compared to traditional composite AL in extremely long eyes, and to determine whether the segmented AL can be extended to the new-generation formul...
The interface formation and properties of composite materials are very important for the preparation of composite materials, and the bonding state and charge transfer between atoms in the interface have a particularly significant effect on the interf...
In this paper, the shear behavior of concrete beams reinforced with FRP stirrups is studied. The shear performances of six concrete beams with a size of 150 mm × 300 mm × 3000 mm under four-point loading up to failure were experimentally...
The advantages and recent advancements of the Discrete-Ordinates (SN) Method have established its widespread adoption in particle transport calculations for nuclear energy systems. The mathematical foundations and diverse applications of the SN metho...
Nowadays it is possible to employ several software packages to evaluate building’s energy performance, each of them based on a different calculation code, with different boundary conditions in terms of environmental temperature, solar radiation, wind...
Dy@C82 is one of the metallofullerenes studied as dopants for improvements of stability and performance of solar cells. Calculations should help in formulating rules for selections of fullerene endohedrals for such new applications in photovoltaics....
A high-speed earthing switch (HSES) of a gas-insulated switchgear (GIS) performs a secondary role in protecting the power system in the event of an accident. After being interrupted by a circuit breaker (CB), the short-circuit current remaining in th...
of 766