Skip to Content

496 Results Found

  • Article
  • Open Access
10 Citations
5,823 Views
16 Pages

Surface Modification of Rusted Rebar and Enhanced Passivation/Anticorrosion Performance in Simulated Concrete Pore Solutions with Different Alkalinity

  • Dan Song,
  • Falin Yang,
  • Mingzhi Guo,
  • Sujing Zhao and ,
  • Jun Hao,
  • Zhaojun Chen,
  • Jiapeng Sun,
  • Yifeng Xu and
  • Jinyang Jiang
  • + 4 authors+ 0 author

27 September 2019

Naturally exposed rusted rebar has been widely used for the production of reinforced concrete. However, rusted rebar is prone to corrosion under chloride ion (Cl−) contamination and/or at a low alkalinity of concrete. This study employed two su...

(This article belongs to the Special Issue Post-Processing Improvements for Mechanical, Microstructure, and Surface Properties of Steel)
  • Article
  • Open Access
12 Citations
2,173 Views
26 Pages

23 May 2025

As the utilization of wind energy continues to expand as a prominent renewable energy source, the application of Darrieus Vertical Axis Wind Turbine (VAWT) technology has expanded significantly. Various passive modification methods have been develope...

(This article belongs to the Special Issue Wind Turbines and Wind Farms Performance Analysis Through Numerical and Experimental Methods, 2nd Edition)
  • Review
  • Open Access
41 Citations
8,519 Views
16 Pages

17 January 2023

Surface passivation engineering is an imperative way to improve photoelectrode performance for photoelectrochemical (PEC) water splitting. To the best of our knowledge, it has never been systematically reviewed in a feature article. In this review, w...

(This article belongs to the Special Issue Theme Issue in Honor of Prof. Dr. Jae Sung Lee)
  • Review
  • Open Access
65 Citations
8,842 Views
15 Pages

It follows from critical evaluation of possibilities and limitations of modern voltammetric/amperometric methods that one of the biggest obstacles in their practical applications in real sample analysis is connected with electrode passivation/fouling...

(This article belongs to the Section Electrochemical Devices and Sensors)
  • Article
  • Open Access
30 Citations
5,750 Views
15 Pages

In Vivo Fluorescence Imaging of Passive Inflammation Site Accumulation of Liposomes via Intravenous Administration Focused on Their Surface Charge and PEG Modification

  • Hisako Ibaraki,
  • Akihiro Takeda,
  • Naoki Arima,
  • Naruhiro Hatakeyama and ,
  • Yuuki Takashima,
  • Yasuo Seta and
  • Takanori Kanazawa
  • + 2 authors+ 0 author

Nanocarriers such as liposomes have been attracting attention as novel therapeutic methods for inflammatory autoimmune diseases such as rheumatoid arthritis and ulcerative colitis. The physicochemical properties of intravenously administered nanomedi...

(This article belongs to the Special Issue Targeted Drug Delivery for Inflammation Treatment)
  • Article
  • Open Access
14 Citations
5,893 Views
15 Pages

MDACl2-Modified SnO2 Film for Efficient Planar Perovskite Solar Cells

  • Yaodong Xiao,
  • Xiangqian Cui,
  • Boyuan Xiang,
  • Yanping Chen and ,
  • Chaoyue Zhao,
  • Lihong Wang,
  • Chuqun Yang,
  • Guangye Zhang,
  • Chen Xie and
  • Peng You
  • + 8 authors+ 3 authors

15 March 2023

The electron transport layer (ETL) with excellent charge extraction and transport ability is one of the key components of high-performance perovskite solar cells (PSCs). SnO2 has been considered as a more promising ETL for the future commercializatio...

(This article belongs to the Section Materials Chemistry)
  • Article
  • Open Access
598 Views
19 Pages

Partial Natural Torsional Frequency Modification of Vehicle Driveline Considering Modal Damping

  • Kui-Yang Gao,
  • Guo-Feng Yao,
  • Min Wang,
  • Jun-Lin Chen and
  • Zhi-Wen Xu

Torsional resonance is a common phenomenon in engineering vehicle drivelines. To avoid the influence of resonance on the driveline, it is typical to modify the frequency. However, traditional frequency modification methods cannot precisely achieve ex...

(This article belongs to the Section Vehicle Engineering)
  • Feature Paper
  • Review
  • Open Access
10 Citations
4,482 Views
27 Pages

26 August 2024

The ever-increasing demand for effective heat dissipation and temperature control in industrial and everyday applications highlights a critical research problem. The need for development is not only in terms of providing thermal comfort to humans but...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
11 Citations
4,090 Views
18 Pages

Revealing the Enhanced Passivation and Anti-Corrosion Performance of Surface-Nanocrystallization-Modified Cr-Alloyed Rebar via Electrochemical Testing and XPS Depth Analysis

  • Weilin Liu,
  • Qiuyue Wang,
  • Gongnian Zou,
  • Edwin Eyram Klu and ,
  • Zhiyong Ai,
  • Falin Yang,
  • Ningning Liang,
  • Lei Gu,
  • Bo Gao and
  • Dan Song
  • + 7 authors+ 2 authors

15 January 2023

Surface nanocrystallization (SNC) modification can be used to realize the high-efficiency derusting of rusted Cr-alloyed rebar and obtain nanostructured grains on the surface of the rebar. The corrosion resistance performance of SNC rebar in a simula...

(This article belongs to the Topic Properties of the Corroding Interface)
  • Article
  • Open Access
16 Citations
4,323 Views
19 Pages

24 April 2021

Remote sensing techniques are leading methodologies for landslide characterization and monitoring. However, they may be limited in highly vegetated areas and do not allow for continuously tracking the evolution to failure in an early warning perspect...

(This article belongs to the Special Issue Remote Sensing for Landslide Monitoring, Mapping and Modeling)
  • Article
  • Open Access
14 Citations
4,937 Views
19 Pages

Defect Passivation in Perovskite Solar Cells Using Polysuccinimide-Based Green Polymer Additives

  • Sergey S. Kozlov,
  • Olga V. Alexeeva,
  • Anna B. Nikolskaia,
  • Vasilisa I. Petrova and ,
  • Olga K. Karyagina,
  • Alexey L. Iordanskii,
  • Liudmila L. Larina and
  • Oleg I. Shevaleevskiy
  • + 3 authors+ 0 author

28 February 2025

Controlling traps and structural defects in perovskite absorber layers is crucial for enhancing both the device efficiency and long-term stability of perovskite solar cells (PSCs). Here we demonstrate the modification of perovskite films by introduci...

(This article belongs to the Section Polymer Applications)
  • Review
  • Open Access
1 Citations
1,974 Views
35 Pages

Passive Fire Prevention Intervention Mechanisms for Timber-Framed Buildings: A Systematic Review (2016–2026)

  • Qingnian Deng,
  • Jingwei Liang,
  • Shihui Zhou,
  • Zekai Guo and ,
  • Liyan Niu,
  • Yuhao Huang,
  • Liang Zheng and
  • Yile Chen
  • + 3 authors+ 0 author

22 June 2026

Fire is the core safety threat to the survival and development of timber-framed buildings, and passive fire prevention intervention is the core foundation of fire protection systems for timber-framed buildings. Existing reviews suffer from limitation...

(This article belongs to the Special Issue Current Advances in the Assessment and Mitigation of Fire Risk in Buildings and Urban Areas: 2nd Edition)
  • Article
  • Open Access
2 Citations
511 Views
10 Pages

Ethanol-Induced Deposition of a Passivation Layer to Enhance the Water Resistance and Luminescent Properties of K2TiF6: Mn4+ Phosphors

  • Haoyu Yang,
  • Xinhua Li,
  • Yongyi Gu,
  • Sifei Liu and ,
  • Xueyu Liu,
  • Xinrong Tang and
  • Haiyan Xu
  • + 2 authors+ 0 author

8 May 2026

Poor moisture resistance represents a critical bottleneck restricting the practical application of K2TiF6:Mn4+ phosphors in white light-emitting diodes. In this work, phosphorous acid was employed as a reducing agent to eliminate surface Mn4+ species...

(This article belongs to the Section Optical and Photonic Materials)
  • Article
  • Open Access
2 Citations
2,196 Views
11 Pages

Fabrication of Bifacial-Modified Perovskites for Efficient Semitransparent Solar Cells with High Average Visible Transmittance

  • Dazheng Chen,
  • Wenjing Shi,
  • Yan Gao,
  • Sai Wang and ,
  • Baichuan Tian,
  • Zhizhe Wang,
  • Weidong Zhu,
  • Long Zhou,
  • He Xi and
  • Yue Hao
  • + 9 authors+ 4 authors

10 March 2025

Semitransparent perovskite solar cells (PSCs) that possess a high-power conversion efficiency (PCE) and high average visible light transmittance (AVT) can be employed in applications such as photovoltaic windows. In this study, a bifacial modificatio...

(This article belongs to the Section Inorganic Chemistry)
  • Article
  • Open Access
22 Citations
5,294 Views
14 Pages

27 June 2017

Stainless steels have good corrosion resistance in many environments but welding or aging can decrease their resistance. This work focused on the effect of aging time and ultrasonic nano-crystal surface modification on the passivation behavior of 316...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
993 Views
17 Pages

Chloride Ion-Induced Modification of Passive Film on the Surface of 18%Ni High-Strength Steel

  • Shule Yu,
  • Boheng Yan,
  • Botao Jiang,
  • Hao Guo and ,
  • Eshov Bakhtiyor and
  • Liang Wang
  • + 1 author+ 0 author

22 January 2026

This work investigates the corrosion behavior of 18%Ni high-strength steel (00Ni18Co-8Mo5TiAl, solution-treated at 820 °C for 3 h and aged at 480 °C for 3 h) in NaCl solutions with 1%, 3.5%, and 6% chloride ions, as well as chloride ions&rsqu...

(This article belongs to the Special Issue Advances in Corrosion and Protection of Metallic Materials)
  • Article
  • Open Access
8 Citations
3,756 Views
10 Pages

The Defect Passivation of Tin Halide Perovskites Using a Cesium Iodide Modification

  • Linfeng He,
  • Jin Cheng,
  • Longjiang Zhao,
  • Xinyao Chen and ,
  • Xiaoping Zou,
  • Chunqian Zhang and
  • Junming Li
  • + 2 authors+ 0 author

3 September 2023

Tin-based perovskites are promising for realizing lead-free perovskite solar cells; however, there remains a significant challenge to achieving high-performance tin-based perovskite solar cells. In particular, the device fill factor was much lower th...

(This article belongs to the Topic Challenges towards Upscaling and Stabilization of Perovskite Solar Cells)
  • Article
  • Open Access
3 Citations
5,143 Views
21 Pages

Minimizing the carbon footprint of the aviation industry is of critical importance for the forthcoming years, allowing the mitigation of climate change through fossil fuel economy. Significant progress toward this goal can be achieved through the aer...

(This article belongs to the Special Issue Selected Papers from the 10th International Conference from Scientific Computing to Computational Engineering (IC-SCCE 2022))
  • Review
  • Open Access
349 Views
37 Pages

28 October 2026

Passive heat transfer enhancement remains the most economical route to compact, energy-efficient heat exchangers because it requires no external power and can be retrofitted into existing hardware. This paper reviews passive enhancement techniques ap...

  • Article
  • Open Access
5 Citations
2,263 Views
12 Pages

Buried Interface Modification Using Diammonium Ligand Enhances Mechanical Durability of Flexible Perovskite Solar Cells

  • Xuan Ji,
  • Xin Chen,
  • Wanlei Dai,
  • Yongshuai Gong and ,
  • Zheng Zhang,
  • Lei Zhang,
  • Cheng Ma,
  • Tinghuan Yang,
  • Yixin Dong and
  • Tianqi Niu
  • + 7 authors+ 2 authors

27 December 2024

Flexible perovskite solar cells (F-PSCs) hold great potential for lightweight photovoltaic applications due to their flexibility, bending compatibility, and low manufacturing cost. However, tin oxide (SnO2), as a common electron transport layer (ETL)...

(This article belongs to the Special Issue Energy Storage and Conversion: From Materials, Devices to Applications)
  • Article
  • Open Access
1 Citations
4,841 Views
12 Pages

1 February 2022

Mechanochemistry initiated the reaction of hydrogen-terminated porous silicon (H/por-Si) powder with arginine. Samples were analyzed using Fourier-transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), zeta potential, scanning electr...

  • Article
  • Open Access
1 Citations
1,052 Views
18 Pages

Accurate temperature prediction is a prerequisite for precise thermal control of an aerial camera, which is crucial for capturing high-resolution images. This paper introduces a methodology for improving the precision of temperature predictions gener...

(This article belongs to the Section Optoelectronics and Optical Materials)
  • Article
  • Open Access
1 Citations
640 Views
20 Pages

Calcium-Modified Coal-Based Humin Waste Residue: Enhanced Cadmium Remediation in Combined Soil–Plant Systems

  • Fei Wang,
  • Nan Guo,
  • Yuxin Ma,
  • Zhi Yuan and ,
  • Xiaofang Qin,
  • Yun Jia,
  • Guixi Chen,
  • Haokai Yu,
  • Ping Wang and
  • Zhanyong Fu
  • + 5 authors+ 0 author

21 January 2026

Coal-based humic acid waste residue is a solid waste generated during the production of humic acid products. The extraction of coal-based humin (NHM) from such residues presents an effective approach for solid waste resource recovery. In this study,...

(This article belongs to the Special Issue Sustainable Risk Assessment and Remediation of Soil Pollution)
  • Article
  • Open Access
1,121 Views
23 Pages

Structural Intervention for the Prevention of Ice-Jam Formation and Flooding in Flowing Watercourses

  • Miroslav Betuš,
  • Ivanna Betušová,
  • Marek Plavčko,
  • Martin Konček and
  • Vladislav Stanko

12 February 2026

Ice-jam formation during winter low-flow conditions represents a persistent hydrotechnical hazard in small and medium-sized rivers of Central Europe. Despite extensive monitoring efforts, preventive structural measures remain insufficiently developed...

(This article belongs to the Section Hydraulics and Hydrodynamics)
  • Article
  • Open Access
1,000 Views
11 Pages

Rapid Oxidation of Adsorbed Organic Impurities on Stainless Steel by Treatment with Diluted Peroxynitric Acid

  • Jernej Ekar,
  • Miran Mozetič,
  • Janez Kovač,
  • Nina Recek and ,
  • Satoshi Ikawa and
  • Katsuhisa Kitano
  • + 1 author+ 0 author

31 October 2025

Stainless steel forms a native film of mixed metal oxides, and organic impurities are likely to adsorb on the surface upon exposure to ambient conditions. For many applications, oxides and impurities should be removed, and several techniques have bee...

(This article belongs to the Section Thin Films and Interfaces)
  • Proceeding Paper
  • Open Access

11 November 2026

This study investigates the seismic performance of reinforced concrete buildings extended with additional storeys, focusing on the connection between the existing structure and the extension. In accordance with Eurocode 8 (EN 1998), the extension is...

(This article belongs to the Proceedings of The 15th Central European Congress on Concrete Engineering)
  • Article
  • Open Access
1 Citations
1,408 Views
24 Pages

20 February 2026

The present numerical study simultaneously investigates the aerodynamic performance, shape optimization, and aeroacoustic characteristics of modified leading-edge wavy wings for the NACA 0020 airfoil. Unlike conventional passive flow-control approach...

  • Article
  • Open Access
146 Views
17 Pages

Elucidating the Role of Ce in Enhancing Phosphorus Poisoning Resistance of Pd-SSZ-13 for Passive NOx Adsorber

  • Dongdong Chen,
  • Feng Liang,
  • Zhenzhen Jia,
  • Bo Zhang and ,
  • Shasha Liu,
  • Chihpeng Lin,
  • Huibin Liu,
  • Chungfu Huang and
  • Xiang Li
  • + 4 authors+ 0 author

29 October 2026

Passive NOx adsorber (PNA) based on palladium-loaded small-pore SSZ-13 zeolite (Pd-SSZ-13) is attractive for mitigating cold-start NOx emissions from lean-burn engines, but its practical deployment is hampered by susceptibility to chemical poisons&md...

  • Article
  • Open Access
3 Citations
2,186 Views
10 Pages

15 September 2023

Further improving the corrosion resistance of the ASTM Grade 13 (Gr13) titanium alloy was achieved by manipulating the cathodic modification effect. The cathodic modification of Gr13 was mainly related to the Ti2Ni precipitate, where minor Ru was con...

(This article belongs to the Special Issue Corrosion and Corrosion Inhibition of Metals and Their Alloys II)
  • Article
  • Open Access
11 Citations
2,161 Views
21 Pages

14 August 2025

This study investigated the influence of Cr, Mo, and W alloying elements incorporated into ferritic stainless steel on the characteristics of passive films formed under acidic chloride conditions. Electrochemical assessments demonstrated that increas...

  • Article
  • Open Access
7 Citations
3,376 Views
14 Pages

23 September 2021

Due to the increasing integration of renewable energy sources (RES) and a corresponding reduction of conventional generating units, there is nowadays a demand from the power-electronic converters to provide grid-forming properties through proper cont...

(This article belongs to the Special Issue Power Converters Design, Control and Applications)
  • Article
  • Open Access
1 Citations
2,316 Views
18 Pages

Influence of Silica Fume (SF) Content on Passive Film Formation of Steel Reinforcement Inside Hardened Concrete

  • Marcella Amaral,
  • Isaac Aguiar Oliveira,
  • Diogo Henrique de Bem,
  • Giovana Costa Réus and ,
  • Gustavo Macioski,
  • Marcelo Miranda Farias and
  • Marcelo Henrique Farias de Medeiros
  • + 2 authors+ 0 author

Corrosion is one of the causes of failure in reinforced concrete structures, and forming a passive film on the steel is essential for protection. Although several studies have looked at passive film formation in concrete pore solutions, few have cons...

(This article belongs to the Special Issue Applied Infrastructure Corrosion Science for Construction Practice Advancement)
  • Article
  • Open Access
688 Views
35 Pages

23 April 2026

The limited self-starting capability of H-type Darrieus Vertical-Axis Wind Turbines (VAWT) remains one of the main obstacles to their deployment in low-power and urban applications, where wind conditions are typically weak and intermittent. Although...

(This article belongs to the Special Issue Trends and Innovations in Wind Power Systems: 2nd Edition)
  • Feature Paper
  • Article
  • Open Access
6 Citations
4,580 Views
16 Pages

A Passivity-Based Strategy for Manual Corrections in Human-Robot Coaching

  • Chiara Talignani Landi,
  • Federica Ferraguti,
  • Cesare Fantuzzi and
  • Cristian Secchi

In recent years, new programming techniques have been developed in the human-robot collaboration (HRC) field. For example, walk-through programming allows to program the robot in an easy and intuitive way. In this context, a modification of a portion...

(This article belongs to the Special Issue Motion Planning and Control for Robotics)
  • Review
  • Open Access
18 Citations
10,794 Views
15 Pages

27 July 2021

Vortex shedding phenomenon behind bluff bodies and its destructive unsteady wake can be controlled by employing active and passive flow control methods. In this quest, researchers employed experimental fluid dynamics (EFD), computational fluid dynami...

  • Article
  • Open Access
5 Citations
3,332 Views
11 Pages

Passive Multi-Layer Composite Damper of Flat Belt Tensioner Idler

  • Zuzana Murčinková,
  • Jozef Živčák,
  • Jozef Zajac and
  • Pavel Adamčík

6 April 2021

In this study, the effect of multi-layer composite passive dampers on the dynamic properties of a mechanical system (a testing machine tool bench) was tested. Passive dampers are characterized by a layered structure, with each layer consisting of a s...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
1 Citations
524 Views
18 Pages

Analysis of Passivation and Corrosion Processes of Modified LaNi5 Alloy-Based Hydride Electrodes

  • Krystyna Giza,
  • Edyta Owczarek,
  • Joanna Piotrowska-Woroniak and
  • Grzegorz Woroniak

15 May 2026

Studies were conducted on the effect of the partial substitution of nickel in an LaNi5 alloy with germanium (5% by weight) or magnesium (3.3% by weight), in addition to surface modification using phosphomolybdic heteropolyacid (MPA) on the course of...

(This article belongs to the Special Issue Corrosion, Fatigue and Corrosion Protection of Metals and Their Alloys in Various Environments (2nd Edition))
  • Article
  • Open Access
29 Citations
7,865 Views
33 Pages

3 January 2023

The fact that people spend a major part of their lifetime indoors, together with the lethal COVID-19 pandemic which caused people to spend even more time inside buildings, has drawn attention to the significance of achieving Agenda 2030 SD goal numbe...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
471 Views
9 Pages

Performance of Electron-Bombarded Active Pixel Sensor with Thin Passivation Film

  • Weiwei Cao,
  • Bo Wang,
  • Yang Yang,
  • Bingli Zhu and ,
  • Peng Xu,
  • Xiaohong Bai,
  • Junjun Qin,
  • Yongsheng Gou,
  • Xiaogang Tong and
  • Yonglin Bai
  • + 6 authors+ 1 author

This work presents a laboratory prototype of an Electron-Bombarded Active Pixel Sensor (EBAPS) to investigate the effects of passivation film thickness on electron energy loss and bombardment gain. Through combined experimental characterization and n...

(This article belongs to the Section Optoelectronics and Optical Materials)
  • Feature Paper
  • Article
  • Open Access
1,799 Views
16 Pages

16 August 2024

Phenomenological research has focused on embodiment. This paper examines how the body is experienced in passive contemplation, understood as a finite province of meaning in Alfred Schutz’s sense. The six features characteristic of any province...

  • Article
  • Open Access
4 Citations
2,283 Views
10 Pages

Influence of Passivation and Solar Cell Configuration on the Electrical Parameter Degradation of Photovoltaic Modules

  • Izete Zanesco,
  • Adriano Moehlecke,
  • Jeferson Ferronato,
  • Moussa Ly and ,
  • João Victor Zanatta Britto,
  • Bruno Inácio da Silva Roux Leite and
  • Taila Cristiane Policarpi
  • + 2 authors+ 0 author

9 February 2024

This article analyses and compares the influence of p-type Cz-Si solar cells produced with and without Al-BSF and silicon oxide passivation on the degradation of the electrical parameters of PV modules, after 77 months under operating conditions in a...

(This article belongs to the Section A2: Solar Energy and Photovoltaic Systems)
  • Review
  • Open Access
38 Citations
4,139 Views
62 Pages

Advanced Strategies for Enhancing the Biocompatibility and Antibacterial Properties of Implantable Structures

  • Oleg Mishchenko,
  • Kristina Volchykhina,
  • Denis Maksymov,
  • Olesia Manukhina and ,
  • Maksym Pogorielov,
  • Mykola Pavlenko and
  • Igor Iatsunskyi
  • + 2 authors+ 0 author

13 February 2025

This review explores the latest advancements in enhancing the biocompatibility and antibacterial properties of implantable structures, with a focus on titanium (Ti) and its alloys. Titanium implants, widely used in dental and orthopedic applications,...

(This article belongs to the Section Biomaterials)
  • Review
  • Open Access
8 Citations
4,720 Views
21 Pages

A Review of Recent Modification, Optimization, and Functionalization Methods for Organic Anticorrosive Coatings

  • Xingjun Zhang,
  • Yuee Feng,
  • Xingyu Zhang,
  • Gang Li and ,
  • Zhengfeng Ma and
  • Xingwei Wang
  • + 1 author+ 0 author

29 November 2023

Corrosion problems are widespread in nature. As one of the most convenient and efficient methods for metal anticorrosion protection, anticorrosive coatings have received increasing attention. With the continuous advancement of science and technology,...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
21 Citations
5,325 Views
11 Pages

Effects of Interfacial Passivation on the Electrical Performance, Stability, and Contact Properties of Solution Process Based ZnO Thin Film Transistors

  • Liaojun Wan,
  • Fuchao He,
  • Yu Qin,
  • Zhenhua Lin and ,
  • Jie Su,
  • Jingjing Chang and
  • Yue Hao
  • + 2 authors+ 0 author

18 September 2018

This paper reports low temperature solution processed ZnO thin film transistors (TFTs), and the effects of interfacial passivation of a 4-chlorobenzoic acid (PCBA) layer on device performance. It was found that the ZnO TFTs with PCBA interfacial modi...

(This article belongs to the Special Issue Thin Film Fabrication and Surface Techniques)
  • Feature Paper
  • Review
  • Open Access
13 Citations
6,279 Views
17 Pages

Review of Control Technologies for Quiet Operations of Advanced Air-Mobility

  • Samuel Afari,
  • Vladimir Golubev,
  • Anastasios S. Lyrintzis and
  • Reda Mankbadi

16 February 2023

The current technologies for developing quiet rotor noise in urban canyons are reviewed. Several passive noise control approaches are discussed with their limitations in reducing both tonal and broadband noise. Blade tip modifications are seen to be...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
41 Citations
8,176 Views
25 Pages

Multi-Frequency Target Detection Techniques for DVB-T Based Passive Radar Sensors

  • Tatiana Martelli,
  • Fabiola Colone,
  • Enrico Tilli and
  • Annarita Di Lallo

28 September 2016

This paper investigates the possibility to improve target detection capability in a DVB-T- based passive radar sensor by jointly exploiting multiple digital television channels broadcast by the same transmitter of opportunity. Based on the remarkable...

(This article belongs to the Special Issue Non-Contact Sensing)
  • Review
  • Open Access
87 Citations
10,751 Views
23 Pages

Recent Developments in Synthesis and Photocatalytic Applications of Carbon Dots

  • Chularat Sakdaronnarong,
  • Amornrat Sangjan,
  • Suthida Boonsith,
  • Dong Chung Kim and
  • Hyeon Suk Shin

11 March 2020

The tunable photoluminescent and photocatalytic properties of carbon dots (CDs) via chemical surface modification have drawn increased attention to this emerging class of carbon nanomaterials. Herein, we summarize the advances in CD synthesis and mod...

(This article belongs to the Special Issue Nanomaterials in Photo(Electro)catalysis)
  • Article
  • Open Access
8 Citations
2,918 Views
18 Pages

21 March 2023

Refinement of the performance of a fully constrained oscillating-foil turbine is carried out via the addition of passive double Gurney flaps. Flaps ranging from hGF=0.005c to 0.075c are added at the trailing edge of the NACA 0015 blade of turbines op...

(This article belongs to the Topic Advanced Energy Harvesting Technology)
  • Article
  • Open Access
827 Views
27 Pages

6 July 2026

During the meshing process of plastic gears, inhomogeneous thermal deformation is prone to occur due to the coupling effect of frictional heat generation and material thermal sensitivity, leading to contact misalignment on tooth surfaces. Traditional...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
106 Citations
12,433 Views
8 Pages

DNA Optical Detection Based on Porous Silicon Technology: from Biosensors to Biochips

  • Luca De Stefano,
  • Paolo Arcari,
  • Annalisa Lamberti,
  • Carmen Sanges and ,
  • Lucia Rotiroti,
  • Ilaria Rea and
  • Ivo Rendina
  • + 2 authors+ 0 author

28 February 2007

A photochemical functionalization process which passivates the porous silicon surface of optical biosensors has been optimized as a function of the thickness and the porosity of the devices. The surface modification has been characterized by contact...

of 10