- Article
To achieve the broadband applicability of standard voltage transformers in “dual high” power systems, an equivalent circuit model of the standard voltage transformer is first established. Using the complex magnetic permeability method and...
To achieve the broadband applicability of standard voltage transformers in “dual high” power systems, an equivalent circuit model of the standard voltage transformer is first established. Using the complex magnetic permeability method and...
Power-frequency overexcitation increases the voltage-to-frequency ratio applied to a transformer core and may drive the core into saturation, resulting in substantial distortion of the no-load current. This paper presents a duality-derived electromag...
Eco-driving algorithms optimize the speed profile to reduce the energy consumption of a vehicle. This paper presents an eco-driving algorithm for battery electric powertrains that applies a split loss integration approach to incorporate the component...
This research investigates the impact of nonlinear clearance factors on position tracking accuracy in the servo drive system of a harmonic reducer. The study introduces a technique for modeling and compensating for transmission errors, thereby improv...
In order to clean up marine fouling attached to marine steel pile, this paper proposed an innovative configuration scheme of the marine steel pile cleaning equipment by the scraping method and its telescopic mechanism by applying a multi-cylinder syn...
The return-to-zero error of the resistance strain load cell is most obvious in the first zero-return process during loading and unloading. To improve the accuracy of the load cell, it is necessary to figure out the cause of the error. The influence o...
This paper introduces a hybrid analytical model (HAM) for the evaluation of permanent-magnet (PM) eddy-current loss in dual-stator single-rotor axial flux permanent-magnet machine (AFPMM), accounting for stator saturation. The proposed model integrat...
This study introduces an integrated lower limb robotic orthosis with near-field electrospinning (NFES) piezoelectric sensors and a fuzzy logic-based gait phase detection system to enhance mobility assistance and rehabilitation. The exoskeleton incorp...
The use of a convolutional neural network to develop a surrogate model of the electric field in MEMS devices is proposed. An electrostatic micromotor is considered as the case study. In particular, different CNNs are trained for the prediction of the...
Static rotor eccentricity distorts the air-gap magnetic field of permanent-magnet (PM) traction motors and may aggravate electromagnetic vibration and noise in electric vehicles. The equivalent remanence method (ERM) is an established eccentric-field...
In order to reduce the complexity of the brushless DC motor (BLDC)-control-system algorithm while improving the estimation performance of the rotor phase position and the speed of the sensorless motor, a neural network (ANN) control algorithm based o...
Although integrated joint torque sensors in robots dispel the need for external force/torque sensors at the wrist to measure interactions, an inherent challenge is that they also measure the robot’s intrinsic dynamics. This is especially proble...
The present work focuses on the inverse identification of loads acting on wing-like geometries, through strain measurements. These loads are considered quasi-static and considered acting at discrete stations across the span of the wing. A demonstrati...
In this paper, passivity-based control (PBC) of a Luo converter-fed DC motor is implemented and presented. In PBC, both exact tracking error dynamics passive output feedback control (ETEDPOF) and energy shaping and damping injection methods do not re...
With the digital transformation of power systems, higher demands are being placed on smart grids for the timely and precise acquisition of the status of transmission and transformation equipment during operational and maintenance processes. When a tr...
This paper presents an improved sliding-mode observer (SMO) for estimating mechanical parameters and compensating load torque in permanent magnet synchronous motor (PMSM) drives. Traditional SMOs have limited robustness when the motor model is inaccu...
Identifying induction-motor equivalent-circuit parameters from nameplate data is challenging without the IEEE Std 112 no-load and locked-rotor tests. This study reformulates the task from constraint-based curve fitting to population-calibrated maximu...
To conveniently implement the online detection of grain moisture in combined harvesters and the address the influence of the no-load measurement baseline, thereby enhancing detection accuracy and measurement continuity, this study developed a differe...
The accuracy of voltage transformer (VT) measurements is imperative for the security and reliability of power systems and the equitability of energy transactions. The integration of a substantial number of electric vehicles (EVs) and their charging i...
The hub drive system has emerged as a promising development orientation for future vehicles, with the planetary gear reducer serving as its key power transmission component. Considering the complexity of the reducer’s dynamic characteristics un...
To tackle the challenges of high variability and low accuracy in short-term electricity load forecasting, this study introduces an enhanced prediction model that addresses overfitting issues by integrating an error-optimal weighting approach with an...
This paper proposes a method to analyze motion errors in a five-degree-of-freedom hydrostatic turntable with internal feedback under eccentric load. The motion error models of thrust and journal bearings are derived separately, revealing the mechanis...
Soft robot has been one significant study in recent decades and soft gripper is one of the popular research directions of soft robot. In a static gripping system, excessive gripping force and large deformation are the main reasons for damage of the o...
This paper presents a bio-inspired rigid–flexible continuum robot driven by flexible shaft tension–torsion synergy, tackling the trade-off between actuation complexity and flexibility in continuum robots. Inspired by the muscular arrangem...
The shaft eddy currents cause a significant saturation in two-pole induction machines (IMs) as they generate an opposing field and repulse the main flux, thus tightening the flux path. This results in inaccurate performance estimations with the magne...
The friction factor of harmonic reducers affects the transmission accuracy in electromechanical actuators (EMAs). In this study, we proposed a friction feedforward compensation method based on improved active disturbance rejection control (IADRC). A...
To address the issue of hysteresis nonlinearity adversely affecting the tracking accuracy of piezoelectric actuators, an improved particle swarm optimization (PSO) algorithm is proposed to improve the accuracy of hysteresis model parameter identifica...
This paper assesses a non-linear model of a three-phase Ladle Furnace Transformer, on slow front transients under no-load conditions. The model is designed to maintain accuracy and reduce complexity in estimating equivalent circuit parameters using t...
This paper presents a mathematical model of hydro power units, especially the governor system model for different operating conditions, based on the basic version of the software TOPSYS. The mathematical model consists of eight turbine equations, one...
Long-term electricity load forecasting plays a vital role for utilities and planners in terms of grid development and expansion planning. An overestimate of long-term electricity load will result in substantial wasted investment on the construction o...
This paper presents an adaptive short-term intraday load forecasting strategy designed for the operational requirements of transmission and distribution system operators. Standard forecasting approaches often report strong performance on selected per...
To investigate the influence of radial installation and radial eccentricity errors on the load-sharing performance of a four-point drive system, a dynamic model is developed using the lumped mass method and Timoshenko beam element theory. The model c...
In today’s world, energy efficiency is becoming increasingly crucial, due to its impact on sustainability in production. Designing systems that consume less energy and manage resources efficiently is essential. Variations in operating speed can...
In a variety of motor models, the effects of iron-loss (ILS) on motor control accuracy and efficiency are generally ignored. This makes it difficult for the motor control system to obtain accurate control parameters (especially on high speed and low...
Aiming at solving the problems of slow motion and positioning deviation caused by the change of the moment of inertia of the servo motor due to different loads, an identification method for the moment of inertia on the basis of the error gain factor...
Forecasting time series with multiple seasonal cycles such as short-term load forecasting is a challenging problem due to the complicated relationship between input and output data. In this work, we use a pattern representation of the time series to...
There are many influencing factors present in different situations of power load. There is also a strong imbalance in the number of load samples. In addition to examining the problem of low training efficiency of existing algorithms, this paper propo...
In order to reduce the effect of numerical weather prediction (NWP) error on short term load forecasting (STLF) and improve the forecasting accuracy, a new hybrid model based on support vector regression (SVR) optimized by an artificial bee colony (A...
Asynchronous motors are widely used in industry and agriculture because of their simple structure, low cost, and easy maintenance. However, due to the coupling and uncertain factors of the actual operation of the motor, a traditional controller canno...
Model simulation and control of pumped storage unit (PSU) are essential to improve the dynamic quality of power station. Only under the premise of the PSU models reflecting the actual transient process, the novel control method can be properly applie...
Legged robots inspired by animal locomotion require actuators with high power density, fast response, and robust force control, yet traditional valve-controlled hydraulic systems suffer from substantial energy losses and weak regeneration performance...
To address the limitations of traditional analytical modeling in capturing complex surface topographies, this paper presents comprehensive research on the error sensitivity mechanism, loaded tooth contact analysis (LTCA), and load-bearing contact cha...
Electrified transport demands reliable and high-performance motor drives. Homopolar single-stator doubly salient permanent-magnet (DSPM) motors feature a simple rotor without windings or permanent magnets and stator-mounted excitation. However, durin...
This study presents the development process of a digital twin for a complex dynamic object using Artificial Neural Networks. A separately excited DC motor is considered as an example, which, despite its well-known electromechanical properties, remain...
Permanent Magnet Synchronous Motors (PMSMs) exhibit inherent symmetry in their electromagnetic structure yet behave as nonlinear and strongly coupled systems that are susceptible to internal parameter perturbations and external disturbances, posing c...
High-speed permanent magnet synchronous motors (PMSMs) are usually started with the hybrid low-speed open-loop and high-speed closed-loop control mode. However, low-speed open-loop control produces large starting current, or even current overload, re...
To address the deteriorated control performance of permanent magnet synchronous motor (PMSM) drive systems for new energy vehicles (NEVs) under complex conditions caused by multi-source disturbances (internal parameter perturbations and external load...
A magnetic-levitation direct-drive oil-free scroll compressor (MLDD-OFSC) eliminates the anti-rotation mechanism to achieve oil-free operation. Still, its large-stroke planar motion introduces strong sensor–DOF coupling and air-gap-dependent st...
As the scale of distributed renewable energy represented by wind power and photovoltaic continues to expand and load demand gradually changes, the future evolution of the smart distribution network will be directly driven by both distributed generati...
The electricity load forecasting plays a pivotal role in the operation of power utility companies precise forecasting and is crucial to mitigate the challenges of supply and demand in the smart grid. More recently, the hybrid models combining signal...
of 2