- Article
Laboratories are complex and dynamic environments where diverse hazards—including toxic gas leakage, volatile solvent combustion, and unexpected fire ignition—pose serious threats to personnel safety and property. Traditional monitoring s...
Laboratories are complex and dynamic environments where diverse hazards—including toxic gas leakage, volatile solvent combustion, and unexpected fire ignition—pose serious threats to personnel safety and property. Traditional monitoring s...
Construction workers face disproportionate rates of fatal and nonfatal injuries, including falls, heat strain, overexertion, and struck-by incidents, that passive personal protective equipment cannot continuously monitor. Smart garments, which embed...
Ozone monitoring in laboratory environments is essential for ensuring personnel safety and maintaining stable experimental conditions, particularly in enclosed facilities where ozone may accumulate during high-energy radiation operations. This study...
Carbon disulfide (CS2) is a highly toxic and flammable solvent extensively used in chemical processes and laboratory analyses. This review examines both air and biological monitoring methods for assessing the exposure of laboratory workers to CS2. Em...
Silica nanoparticles (SiO2 NPs), due to their chemical-physical properties, are among the most widely produced nanomaterials (NMs) in the world, and therefore used in a wide range of industries. Such widespread use, however, draws attention to the he...
Steel structures in marine splash zones (MSZ) experience severe corrosion owing to high humidity and frequent wet–dry cycles, which poses considerable threats to structural integrity and operational safety. To achieve intelligent, real-time cor...
Suffering from structural deterioration and natural disasters, the resilience of civil structures in the face of extreme loadings inevitably drops, which may lead to catastrophic structural failure and presents great threats to public safety. Earthqu...
Robust, reliable, and affordable analytical techniques are essential for screening and monitoring food and water safety from contaminants, pathogens, and allergens that might be harmful upon consumption. Recent advances in decentralised, miniaturised...
The safety management of laboratories is of utmost importance in the construction and management of university laboratories. Abnormal behaviors such as smoking, incorrect wearing of personal protective equipment (PPE) like lab coats, hats, masks, and...
Several studies have investigated airborne chemical exposures in university teaching laboratories, where activities are typically structured and supervised. University research laboratories typically involve greater autonomy, the use of more hazardou...
The term “smart lab” refers to a system that provides a novel and flexible approach to automating and connecting current laboratory processes. In education, laboratory safety is an essential component of undergraduate laboratory classes....
Based on the interpretation of the identified risk biases from a narrative perspective, this paper studies the biases in safety and security risk management of chemical-related academic laboratories from four parts: risk identification, risk assessme...
We present here an approach to the deployment of social robots in a science laboratory to monitor the behavior of students with respect to safety regulations to prevent accidents. Our vision is that the social robot should act as a friendly companion...
Focusing on the issues of severe mining pressure and discontinuous surface deformation caused by the large-scale mining of multiple coal seams, and taking into account the research background of Shigetai Coal Mine in Shendong Mining Area, this study...
D-band (110–170 GHz) is a promising direction for the future of 6th generation mobile networks (6G) for high-speed mobile communication since it has a large available bandwidth, and it can provide a peak rate of hundreds of Gbit/s. Compared wit...
In the artificial intelligence (AI) era, the structure of safety hazards in university laboratories is changing, with unconventional hazards making up a growing share. As AI evolves from an auxiliary tool into an autonomous research collaborator, int...
Since 2012, the Joint Safety Team (JST) has led initiatives aimed at increasing safety awareness and improving safety culture in research laboratory environments at the University of Minnesota. Specifically, its Analysis and Compliance committee has...
Occupational sectors are perennially challenged by the potential for workplace accidents, particularly in roles involving tools and machinery. A notable cause of such accidents is the inadequate use of Personal Protective Equipment (PPE), essential i...
To understand the pollution characteristics of volatile organic compounds (VOCs) in the glass deep-processing industry, samples were collected using polyvinyl fluoride bags and quickly transferred to summa tanks for GC/MS/FID analysis. The emission c...
Standardized operating procedures are essential for ensuring safety and reproducibility in chemical laboratory experiments. However, real-time monitoring of manual laboratory operations, such as pipetting, remains challenging due to complex human&nda...
Effective management of chemical reagents in universities is essential for laboratory safety and operational efficiency. Manual management models characterized by fragmented oversight are insufficient to ensure traceability, real-time monitoring, and...
In this paper, A high-order response surface method is proposed for finite element model updating of continuous beam bridges. Firstly, based on visual inspection and environmental vibration testing, the peak picking (PP) method and random subspace id...
In the published publication [...]
Algebraic persistent fault analysis (APFA), which combines algebraic analysis with persistent fault attacks, brings new challenges to the security of lightweight block ciphers and has received widespread attention since its introduction. Threshold Im...
Real-time analytical tools to monitor bioprocess and fermentation in biological and food applications are becoming increasingly important. Traditional laboratory-based analyses need to be adapted to comply with new safety and environmental guidelines...
This paper proposes the ultra−generalized continuous class F (UCCF) mode, which combines the influences of the drain current conduction angle and overdriven transistor on the drain current waveform to achieve a broader finite third-harmonic loa...
The simultaneous wireless information and power transfer (SWIPT) technique has been regarded as an appealing approach to prolong the lifetime of wireless sensor networks. However, co-channel interferences with SWIPT in wireless networks have not been...
The simultaneous wireless information and power transfer (SWIPT) technique has been considered as a promising approach to prolong the lifetime of energy-constraint wireless sensor networks (WSNs). In this paper, a multiple-input multiple-output (MIMO...
We consider a multiple-input multiple-output amplify-and-forward wireless multiple-hop sensor network (WMSN). The simultaneous wireless information and power transfer technology is deployed to potentially achieve an autonomous system. We investigate...
To meet the packaging requirements of terahertz (THz) communication systems, a microstrip line (MSL) to rectangular waveguide (RWG) transition is proposed in this paper. In the transition, the MSL is connected to the corrugated substrate integrated w...
The rapidly developing battery industry entails the need for battery testing. Battery charging and discharging require time-consuming testing, so it is necessary for the battery testing laboratory to take effective personnel protection, area isolatio...
In a nuclear power plant, the consequences of a multi-unit event occurring concurrently are more serious than those of a single-unit event. The first step in the probabilistic safety analysis of multi-units is to analyze the initiating events and cal...
Venetoclax-based therapy is effective in chronic lymphocytic leukemia/small lymphocytic lymphoma (CLL/SLL), but tumor lysis syndrome (TLS) risk necessitates a resource-intensive five-week dose ramp-up with intravenous hydration, frequent laboratory m...
Arsenic is one of the most dangerous metalloids, and silicon is a helpful element supporting plants to withstand stress. In this study, three factors were considered, including rice accessions with three different lines, including Lsi1-RNAi line (LE-...
Arsenic is one of the most hazardous metalloids in nature, and due to its high water solubility, it is one of the most important causes of pollution. However, silicon reduces the uptake and transport of arsenic in rice. This study investigates the in...
Rice is one of the most important routes for arsenic to enter the human food chain and threatens more than half of the world’s population. In addition, arsenic-contaminated soils and waters increase the concentration of this element in various tissue...
In this paper, a time-domain signal processing method is proposed to extract the real-time time-varying cable frequency. The proposed conjugate-pair decomposition (CPD) method uses empirical mode decomposition (EMD) to obtain intrinsic mode functions...
A seismic damage identification method for composite cable-stayed bridges has been developed. The proposed method is based on a Support Vector Machine (SVM) and Wavelet Network (WN). A shaking table test of a composite cable-stayed bridge is employed...
We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedure...
Surface-enhanced Raman scattering (SERS) technology has attracted growing interest for on-site food safety monitoring, with flexible substrates offering distinct advantages in conformal sampling, portability, and non-destructive analysis. This review...
The first six contributions considered in this Editorial provide a coherent view of the modern laboratory as an integrated system of safety governance, digital education, measurement confidence, diagnostic implementation, and clinical quality assuran...
High titers of infectious viruses for vaccine and diagnostic reference panel development are made by infecting susceptible mammalian cells. Laboratory procedures are strictly performed in a Bio-Safety Level-3 (BSL3) laboratory and each entry and exit...
For some time, Brazil has been appointed as one of the greatest consumers of cosmetic products in the world. Although cosmetics may seem harmless, destined exclusively to enhance personal appearance or to clean and protect the skin, hair and nails, n...
The fire effect and performance of bridge pylons under construction were investigated via an analysis conducted on two types of pylons with different wall thicknesses. Three fire scenarios, namely internal fire, external ring fire, and external side...
Construction of the deep foundation pit (DFP) in subway stations is fraught with significant uncertainties, which may cause project delays due to discrepancies between single-indicator monitoring warning information and actual conditions at the site....
Thermal effects play a crucial role in the evolution of insulation performance in power cables during long-term operation. Before the experiments, crosslinked polyethylene (XLPE) sheets and cables were thermally aged at 105 °C for up to 180 days....
The real-time evaluation of slope stability is a crucial technical issue in foundation excavation and slope construction. However, conventional monitoring methods often fall short of achieving real-time and accurate measurements, which poses challeng...
The deformation behavior and fracture mechanism of cast duplex stainless steel tubular specimens under different tensile stages were investigated through experimental and numerical evaluation. The results showed that the axial stress was redistribute...
The microstructural evolution and mechanical behavior of cast duplex stainless steels (CDSSs) at 400 °C for different thermal aging times were investigated by transmission electron microscope (TEM) and small punch test (SPT). The results showed t...
Displacement measurement is a critical issue in mechanical engineering. The moiré effect increases the accuracy of contactless measurements. We theoretically estimated the sensitivity threshold of moiré measurements using a digital came...
of 23