Skip to Content

614 Results Found

  • Article
  • Open Access
530 Views
26 Pages

Tensile Performance and Structural Optimisation of FDM-Printed PLA Components with Different Infill Structures

  • Runqi Liu,
  • Shuo Wang,
  • Keyi Wang,
  • Mingqin Li and ,
  • Xingwang Liu,
  • Kashan Khan,
  • Tianqi Lu and
  • Yitong Wang
  • + 3 authors+ 0 author

31 August 2026

Fused Deposition Modelling (FDM) is one of the most widely adopted additive manufacturing technologies, and polylactic acid (PLA) has emerged as a commonly used feedstock material owing to its biodegradability and low cost; however, the mechanical pe...

(This article belongs to the Special Issue Symmetry and Asymmetry in Sustainable, Circular, and Intelligent Structural Engineering)
  • Article
  • Open Access
213 Views
20 Pages

Seismic Performance of RC Frame Structures with Masonry Infill Walls Strengthened by Mortar Surface Layers

  • Chen Qiu,
  • Tiehua Shi,
  • Yawei Gao,
  • Ying Huang and ,
  • Guang Yang,
  • Yanhua Zhang,
  • Yuyao Wu and
  • Yingmu Jiang
  • + 3 authors+ 0 author

27 October 2026

Although infill masonry walls in frame structures are classified as non-structural components, they can still resist a portion of seismic forces during earthquakes. Historical earthquake damage indicates that infill masonry walls in frame structures...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
1,167 Views
30 Pages

Lightweight polylactic acid (PLA LW) is a thermally activated foaming filament in which print temperature governs the extent of in situ gas expansion. This dual role, as a microstructural design parameter and a primary source of performance variabili...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
8 Citations
5,191 Views
30 Pages

Earthquake Retrofitting of “Soft-Story” RC Frame Structures with RC Infills

  • George C. Manos,
  • Konstantinos Katakalos,
  • Vassilios Soulis and
  • Lazaros Melidis

15 November 2022

Multi-story, old reinforced concrete (RC) structures with a “soft-story” on the ground floor, sustain considerable damage to the soft story during earthquakes due to the presence of masonry infills in the upper stories. Aspects of such masonry infill...

(This article belongs to the Special Issue Concrete Structures: Latest Advances and Prospects for a Sustainable Future)
  • Article
  • Open Access
37 Citations
11,710 Views
21 Pages

23 March 2024

Lightweight structures with a high stiffness-to-weight ratio always play a significant role in weight reduction in the aerospace sector. The exploration of non-conventional structures for aerospace applications has been a point of interest over the p...

(This article belongs to the Special Issue Design, Optimization, Simulation, and Defect Detection for Additive Manufacturing)
  • Article
  • Open Access
12 Citations
2,908 Views
19 Pages

Study on Seismic Performance of RC Frame Structures Considering the Effect of Infilled Walls

  • Xuetan Zhang,
  • Yang Zhou,
  • Xiangyu Liu,
  • Yaoyu Zheng and
  • Zhengxin Qi

This paper studies the impact of half-height infilled walls on the failure modes of frame columns through quasi-static tests of both frame models and half-height infilled wall frame models. Based on the experimental results, a seismic analysis model...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
1,335 Views
23 Pages

This paper presents a novel method for designing manufacturable porous infill structures using a Voronoi-based topology optimization framework. By integrating discrete Voronoi representations into density-based topology optimization in a differentiab...

(This article belongs to the Special Issue Research Advances in Computational Fabrication and Structural Optimization)
  • Article
  • Open Access
957 Views
23 Pages

28 April 2026

The optimization of impact localization in 3D-printed structures is critical for their application in smart monitoring and damage detection systems. This study investigates the influence of infill density on the accuracy of low-velocity impact locali...

(This article belongs to the Special Issue Acoustic and Ultrasonic Sensing Technology in Non-Destructive Testing—2nd Edition)
  • Article
  • Open Access
35 Citations
10,713 Views
23 Pages

4 February 2019

Following the strong earthquake on April 25, 2015 in Nepal, a team from the University of Porto, in collaboration with other international institutions, made a field study on some of the most affected areas in the capital region of Kathmandu. One of...

(This article belongs to the Special Issue Masonry Buildings: Research and Practice)
  • Article
  • Open Access
22 Citations
12,876 Views
30 Pages

26 September 2014

This paper discusses the performance of a structural fuse concept developed for use as a seismic isolation system in the design and retrofit of masonry infill walls. An experimental program was developed and executed to study the behavior of the stru...

(This article belongs to the Special Issue Seismic-Resistant Building Design)
  • Article
  • Open Access
4 Citations
1,053 Views
25 Pages

Experimental Evaluation of RC Structures with Brick Infills for Vertical Forest Adaptation in Seismic Regions

  • Theodoros Rousakis,
  • Vachan Vanian,
  • Martha Lappa,
  • Adamantis G. Zapris and ,
  • Ioannis P. Xynopoulos,
  • Maristella Voutetaki,
  • Stefanos Kellis,
  • George Sapidis,
  • Maria Naoum and
  • Emmanouil Golias
  • + 10 authors+ 5 authors

17 November 2025

Existing Mediterranean reinforced concrete buildings with masonry infills exhibit critical seismic vulnerabilities, yet real-time damage detection capabilities remain limited. This study validates a novel dense piezoelectric transducer (PZT) network...

  • Article
  • Open Access
7 Citations
4,219 Views
25 Pages

Behavior of Scaled Infilled Masonry, Confined Masonry & Reinforced Concrete Structures under Dynamic Excitations

  • Asad Ullah Qazi,
  • Ali Murtaza Rasool,
  • Yasser E. Ibrahim,
  • Asif Hameed and
  • Muhammad Faizan Ali

This research investigates the nonlinear behavior of scaled infilled masonry (IFM), confined masonry (CM), and reinforced concrete (RC) structures by utilizing and validating two tests from the literature as benchmarks. The validation was based on a...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
22 Citations
5,108 Views
34 Pages

26 April 2023

This paper examines how the decision to include (or exclude) masonry infill walls in the modelling of non-seismically designed RC framed structures can affect the results of the EC8-3 seismic assessment process. A frequently used macro-modelling tech...

(This article belongs to the Collection Seismic Safety Assessment and Strengthening of Existing Constructions)
  • Article
  • Open Access
4 Citations
3,086 Views
24 Pages

Influence of Infill Pattern on Ballistic Resistance Capabilities of 3D-Printed Polymeric Structures

  • Muhamed Bisić,
  • Adi Pandžić,
  • Merim Jusufbegović,
  • Mujo Ćerimović and
  • Predrag Elek

2 July 2025

Recent technological advances have expanded the use of 3D-printed polymer components across industries, including a growing interest in military applications. The effective defensive use of such materials depends on a thorough understanding of polyme...

(This article belongs to the Special Issue Polymeric Materials in 3D Printing)
  • Proceeding Paper
  • Open Access
9 Citations
3,917 Views
7 Pages

Optimizing Impact Toughness in 3D-Printed PLA Structures Using Hilbert Curve and Honeycomb Infill Patterns

  • Muhammad Usman Ali,
  • Azka Nadeem,
  • Babar Ashfaq,
  • Shafi Ullah and ,
  • Muhammad Waseem,
  • Muhammad Arbab Aslam and
  • Qazi Amaan Alam
  • + 2 authors+ 0 author

24 September 2024

This study investigates the impact toughness of 3D-printed PLA structures with Hilbert curve and honeycomb infill patterns at various raster angles. Samples were fabricated using Fused Deposition Modeling (FDM) and tested for impact energy absorption...

(This article belongs to the Proceedings of 4th International Conference on Advances in Mechanical Engineering (ICAME-24))
  • Article
  • Open Access
1 Citations
630 Views
14 Pages

Experimental and Numerical Investigations on Compressive Performance of Additively Manufactured PLA Structures with Various Infill Patterns

  • Alexandra Llidó Barragán,
  • Aritz Unamuno Garay,
  • Santiago Ferrándiz-Bou,
  • Dana Luca Motoc and
  • Cristina Pavón

28 July 2026

Additive manufacturing, particularly Fused Deposition Modeling (FDM), has emerged as a promising technology for construction applications due to its ability to fabricate complex geometries, optimize material usage, and enable customized designs. This...

(This article belongs to the Special Issue Multi-Material Thermoplastic Additive Manufacturing: Interfaces, Architectured Structures and Performance)
  • Article
  • Open Access
302 Views
36 Pages

11 October 2026

This study investigates how soil–structure interaction (SSI) affects the seismic effectiveness and relative performance of high-strength masonry infill retrofit layouts for a three-story nonductile reinforced concrete building. Three retrofit c...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
15 Citations
4,398 Views
21 Pages

14 September 2024

The objective of this research is to optimize additive manufacturing processes, specifically Fused Filament Fabrication (FFF) techniques, to produce sandwich structures. Mono-material specimens made of polylactic acid (PLA) were produced, where both...

(This article belongs to the Special Issue Additive Manufacturing of Advanced Composites)
  • Article
  • Open Access
73 Citations
11,659 Views
11 Pages

Investigation of Tensile Properties of Different Infill Pattern Structures of 3D-Printed PLA Polymers: Analysis and Validation Using Finite Element Analysis in ANSYS

  • S. Ganeshkumar,
  • S. Dharani Kumar,
  • U. Magarajan,
  • S. Rajkumar and ,
  • B. Arulmurugan,
  • Shubham Sharma,
  • Changhe Li,
  • R. A. Ilyas and
  • Mohamed Fathy Badran
  • + 4 authors+ 0 author

25 July 2022

The advancement of 3D-printing technology has ushered in a new era in the production of machine components, building materials, prototypes, and so on. In 3D-printing techniques, the infill reduces the amount of material used, thereby reducing the pri...

(This article belongs to the Special Issue 3D Printing and Additive Manufacturing of Polymer and Composites)
  • Article
  • Open Access
520 Views
13 Pages

28 September 2026

The advances in 3D-printing technology add new dimensions to the already very versatile composite manufacturing methods. Polylactic acid (PLA) filaments are widely used for 3D printing. The low price and the biodegradability of PLA are major advantag...

(This article belongs to the Special Issue Design Optimization of Thin-Walled Composite Structures)
  • Article
  • Open Access
18 Citations
5,131 Views
18 Pages

This research investigates the optimization of 3D-printed sandwich structures fabricated using fused filament fabrication (FFF) with polylactic acid (PLA) and PLA reinforced with flax fibers. The core of the sandwich structure features a gyroid infil...

  • Article
  • Open Access
3 Citations
1,660 Views
24 Pages

10 March 2026

Fused deposition modeling/fused filament fabrication (FDM/FFF) enables architectural tailoring of mechanical response through layer configuration and multi-material manufacturing strategies. However, the combined effects of layer arrangement, infill...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
7 Citations
3,717 Views
24 Pages

Additive Manufacturing of Carbon Fiber Cores for Sandwich Structures: Optimization of Infill Patterns and Fiber Orientation for Improved Impact Resistance

  • Claudio Tosto,
  • Lorena Saitta,
  • Ignazio Blanco,
  • Gabriele Fichera and ,
  • Mattia Evangelista,
  • Jerin Jose,
  • Alessia Pantaleoni and
  • Irene Bavasso
  • + 3 authors+ 0 author

Carbon fiber-reinforced composites (CFRCs) are widely used in aerospace, automotive, and defense applications due to their high strength-to-weight ratio and excellent mechanical performance. In this study, cores and sandwich panels were fabricated vi...

(This article belongs to the Special Issue Innovative and Sustainable Advances in Polymer Composites for Additive Manufacturing: Processing, Microstructure, Machining, and Mechanical Properties)
  • Article
  • Open Access
2 Citations
1,320 Views
20 Pages

18 November 2025

Material Extrusion (MEX) additive manufacturing offers a versatile platform for producing lightweight, structurally optimized components. This study investigates the simultaneous optimization of topology and infill density using three polymer composi...

(This article belongs to the Special Issue Intelligent Systems and Tools for Optimal Design in Mechanical Engineering and Their Practical Applications)
  • Article
  • Open Access
3 Citations
2,984 Views
12 Pages

Effect of Infill Density of the Printed PET-G Structures Containing Iron Oxides on Magnetic Properties

  • Lucie Zárybnická,
  • Martin Marek,
  • Radek Ševčík,
  • Radek Stolín and ,
  • Jaroslav Pokorný and
  • Jiří Šál
  • + 1 author+ 0 author

This work aims to characterize printing structures with various infill densities composed of a thermoplastic material containing magnetic particles composed of mainly Iron(III) oxides with regard to their possible processing with the additive technol...

(This article belongs to the Section Magnetic Materials)
  • Article
  • Open Access
21 Citations
2,054 Views
19 Pages

17 October 2025

This study investigates the impact absorption performance of bamboo-inspired 3D-printed circular tubes in terms of infill type (grid, gyroid, honeycomb, Archimedean chords), infill ratio (10%, 20%, 30%, and 40%), wall thickness (0.8, 1.2, 1.6, and 2....

(This article belongs to the Section Biomimetic Design, Constructions and Devices)
  • Article
  • Open Access
17 Citations
7,734 Views
18 Pages

To study the influence of masonry infill walls on the hysteretic performance of reinforced concrete frames, a cyclic experiment was conducted for three two-story and two-span reinforced concrete frame structures, including one reinforced concrete fra...

(This article belongs to the Collection Structural Analysis for Earthquake-Resistant Design of Buildings)
  • Article
  • Open Access
21 Citations
5,268 Views
19 Pages

Effects of Infills in the Seismic Performance of an RC Factory Building in Pakistan

  • Nisar Ali Khan,
  • Giorgio Monti,
  • Camillo Nuti and
  • Marco Vailati

Infilled reinforced concrete (IRC) frames are a very common construction typology, not only in developing countries such as Pakistan but also in southern Europe and Western countries, due to their ease of construction and less technical skills requir...

(This article belongs to the Special Issue Advanced Methods for Structural Rehabilitation)
  • Article
  • Open Access
4 Citations
5,860 Views
20 Pages

Infill Design Reinforcement of 3D Printed Parts Using Refinement Technique Adapted to Continuous Extrusion

  • Sashi Kiran Madugula,
  • Laurence Giraud-Moreau,
  • Pierre-Antoine Adragna and
  • Laurent Daniel

In this paper, we introduce an advanced numerical tool aimed to optimise the infill design of 3D printed parts by reducing printing time. In 3D printing, the term infill refers to the internal structure of a part. To create the infill design, slicing...

(This article belongs to the Topic Additive Manufacturing)
  • Article
  • Open Access
11 Citations
3,588 Views
15 Pages

Dimensional Accuracy and Mechanical Characterization of Inconel 625 Components in Atomic Diffusion Additive Manufacturing

  • Tobias Rosnitschek,
  • Catharina Stierle,
  • Christian Orgeldinger,
  • Armin Seynstahl and ,
  • Bettina Alber-Laukant and
  • Stephan Tremmel
  • + 1 author+ 0 author

28 May 2024

Metal material additive manufacturing (MEAM) has risen in interest in the last five years as an alternative to powder bed processes. MEAM is promising for generating shelled components with defined infill structures, making it very interesting for li...

  • Article
  • Open Access
11 Citations
5,488 Views
14 Pages

18 August 2021

Additive manufacturing (AM) applications have been steadily increasing in many industry sectors. AM allows creating complex geometries inside of a part to leave some space empty, called infills. Lighter parts are manufactured in a shorter time with l...

  • Article
  • Open Access
22 Citations
7,895 Views
15 Pages

Seismic Fragility Analysis of Low-Rise RC Buildings with Brick Infills in High Seismic Region with Alluvial Deposits

  • Rabindra Adhikari,
  • Rajesh Rupakhety,
  • Prajwal Giri,
  • Rewati Baruwal and ,
  • Ramesh Subedi,
  • Rajan Gautam and
  • Dipendra Gautam
  • + 2 authors+ 0 author

12 January 2022

Most of the reinforced concrete buildings in Nepal are low-rise construction, as this type of construction is the most dominant structural form adopted to construct residential buildings in urban and semi-urban neighborhoods throughout the country. T...

(This article belongs to the Special Issue Seismic Performance of New-Designed and Existing RC Buildings)
  • Article
  • Open Access
16 Citations
3,680 Views
25 Pages

15 June 2023

The significance of lightweight designs has become increasingly paramount due to the growing demand for sustainability. Consequently, this study aims to demonstrate the potential of utilising a functionally graded lattice as an infill structure in de...

(This article belongs to the Special Issue Design and Application of Additive Manufacturing: Volume II)
  • Proceeding Paper
  • Open Access
124 Views
10 Pages

14 October 2026

The paper presents tensile tests of hybrid steel–concrete joints for discrete reticulated timber structures. The hybrid steel–concrete joint consists of short steel tubes filled with polypropylene fiber-reinforced concrete. The anticipate...

(This article belongs to the Proceedings of The 15th Central European Congress on Concrete Engineering)
  • Article
  • Open Access
1 Citations
1,203 Views
27 Pages

23 March 2026

Long-period ground motions (LPGMs), rich in low-frequency content, can resonate with long-period structures like high-rise buildings, leading to severe damage. As seismic design shifts from safety toward resilience, limited attention to LPGMs makes i...

(This article belongs to the Special Issue Seismic Analysis and Design of Building Structures—2nd Edition)
  • Article
  • Open Access
51 Citations
4,290 Views
18 Pages

Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless Steel Components

  • Tobias Rosnitschek,
  • Andressa Seefeldt,
  • Bettina Alber-Laukant,
  • Thomas Neumeyer and ,
  • Volker Altstädt and
  • Stephan Tremmel
  • + 1 author+ 0 author

9 September 2021

This study focuses on the effect of part geometry and infill degrees on effective mechanical properties of extrusion additively manufactured stainless steel 316L parts produced with BASF’s Ultrafuse 316LX filament. Knowledge about correlations betwee...

(This article belongs to the Special Issue Sintering and Processing of Metallic Materials: Experiments and Simulation)
  • Article
  • Open Access
7 Citations
2,772 Views
13 Pages

25 August 2024

Recent seismic events have prompted research into innovative and sustainable materials for strengthening and repairing obsolete and vulnerable buildings. These earthquakes have exposed the high seismic vulnerability of existing reinforced concrete (R...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
2 Citations
2,042 Views
17 Pages

3 October 2024

Quito, the capital of Ecuador, a development pole, has experienced a population growth of 9% in the last five years. The structural system commonly chosen for housing is reinforced concrete frames with flat slabs, embedded beams, and masonry infill....

(This article belongs to the Special Issue Seismic Resistance and Vulnerability Assessments of Building Structures)
  • Article
  • Open Access
1,752 Views
20 Pages

10 September 2025

Many existing reinforced concrete (RC) frames with brick infill walls are vulnerable to earthquake damage, particularly when the walls contain window openings that reduce the lateral resistance. This study aims to examine the seismic performance of R...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
13 Citations
4,738 Views
17 Pages

28 January 2025

The aim of the present study is to investigate the performance of two carbon fiber-reinforced composite polymers used to manufacture end-use parts via the fused filament fabrication (FFF) method. The materials under investigation were carbon fiber-re...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2024)
  • Article
  • Open Access
14 Citations
2,617 Views
34 Pages

Plastic Deformation Analysis of a New Mega-Subcontrolled Structural System (MSCSS) Subjected to Seismic Excitation

  • Muhammad Moman Shahzad,
  • Xun’an Zhang,
  • Xinwei Wang,
  • Mustapha Abdulhadi and ,
  • Yanjie Xiao and
  • Buqiao Fan
  • + 1 author+ 0 author

This paper seeks to examine the plastic deformation and seismic structural response of a mega-subcontrolled structural system (MSCSS) subjected to strong seismic excitations. Different MSCSS configurations were modeled with nonlinear finite elements,...

(This article belongs to the Special Issue Towards Smart Tech 4.0 in the Built Environment: Applications of Disruptive Digital Technologies in Smart Cities, Construction, and Real Estate)
  • Article
  • Open Access
15 Citations
4,223 Views
21 Pages

Influence of Infill Geometry and Density on the Mechanical Properties of 3D-Printed Polylactic Acid Structure

  • Jozef Jaroslav Fekiač,
  • Lucia Kakošová,
  • Michal Krbata,
  • Marcel Kohutiar and ,
  • Maroš Eckert,
  • Zbynek Studeny and
  • Andrej Dubec
  • + 2 authors+ 0 author

Additive manufacturing of polymer composites, also known as 3D printing, is one of the progressive technologies in material engineering. It enables the production of parts with complex geometries while optimizing material efficiency. Polylactide (PLA...

  • Article
  • Open Access
3 Citations
3,980 Views
30 Pages

Dynamic Performance Analysis by Laboratory Tests of a Sustainable Prefabricated Composite Structural Wall System

  • Evangelia Georgantzia,
  • Themistoklis Nikolaidis,
  • Konstantinos Katakalos,
  • Katerina Tsikaloudaki and
  • Theodoros Iliadis

9 May 2022

In recent decades, steel frames infilled with precast load-bearing walls have been successfully employed as lateral load-resisting structural systems in high-rise buildings. This is due to their structural efficiency as outer and major inner facades...

(This article belongs to the Section G: Energy and Buildings)
  • Article
  • Open Access
8 Citations
3,598 Views
23 Pages

12 November 2021

Within the scope of literature, the influence of openings within the infill walls that are bounded by a reinforced concrete frame and excited by seismic drift forces in both in- and out-of-plane direction is still uncharted. Therefore, a 3D micromode...

(This article belongs to the Section Natural Hazards)
  • Article
  • Open Access
12 Citations
2,712 Views
24 Pages

Influence of Masonry Infills on Seismic Performance of an Existing RC Building Retrofitted by Means of FPS Devices

  • Diego Gino,
  • Elena Miceli,
  • Luca Giordano,
  • Giuseppe Carlo Marano and
  • Paolo Castaldo

9 March 2023

The safety assessment of existing structures in areas with a relevant seismic hazard is one of the major topics for engineers since many existing reinforced concrete structures have been realized disregarding seismic design with minimal details with...

(This article belongs to the Special Issue Engineering Structures: Design and Assessment Issues for Static and Seismic Actions)
  • Article
  • Open Access
2 Citations
2,775 Views
26 Pages

9 October 2022

In this paper, a new deck plate system, in which the top chords are infilled with high-performance cement-based material such as high-strength mortar and UHPC (ultra-high performance concrete), was proposed. The bending capacity of the proposed deck...

(This article belongs to the Section Sustainable Urban and Rural Development)
  • Article
  • Open Access
1,623 Views
16 Pages

13 February 2026

The seismic vulnerability of existing reinforced concrete buildings is often exacerbated by the inadequate mechanical performance of non-structural components, such as masonry infill walls, which may exhibit brittle behavior and limited deformation c...

  • Article
  • Open Access
13 Citations
4,372 Views
20 Pages

18 November 2022

The seismic behavior of the infill masonry infill walls has a significant impact on the global response of reinforced concrete frame structures. One factor influencing its behavior is the existence of openings in the walls, such as doors and windows,...

(This article belongs to the Section Building Structures)
  • Feature Paper
  • Article
  • Open Access
16 Citations
5,719 Views
21 Pages

Fabrication and Characterization of Fiber-Reinforced Composite Sandwich Structures Obtained by Fused Filament Fabrication Process

  • George Razvan Buican,
  • Sebastian-Marian Zaharia,
  • Mihai Alin Pop,
  • Lucia-Antoneta Chicos and ,
  • Camil Lancea,
  • Valentin-Marian Stamate and
  • Ionut Stelian Pascariu
  • + 2 authors+ 0 author

The application of fused filament fabrication processes is rapidly expanding in many domains such as aerospace, automotive, medical, and energy, mainly due to the flexibility of manufacturing structures with complex geometries in a short time. To imp...

(This article belongs to the Special Issue Surface Modification for Additive Manufacturing: Materials, Processing, Applications and Future Challenges)

of 13