Skip to Content

401 Results Found

  • Article
  • Open Access
10 Citations
5,633 Views
13 Pages

Fracture Statistics for Inorganically-Bound Core Materials

  • Philipp Lechner,
  • Jens Stahl,
  • Florian Ettemeyer,
  • Benjamin Himmel and ,
  • Bianca Tananau-Blumenschein and
  • Wolfram Volk
  • + 1 author+ 0 author

16 November 2018

In this article, we study the fracture characteristics of inorganically-bound foundry cores. It will be shown that the fracture stress of inorganic cores follows Weibull’s strength distribution function for brittle materials. Using three-point...

(This article belongs to the Section Porous Materials)
  • Article
  • Open Access
12 Citations
5,860 Views
20 Pages

28 April 2023

Sandstone is widely used a construction and building material. However, its uniaxial tensile strength (UTS) is not adequately understood. To characterize the uniaxial tensile strength of natural sandstone, three groups of specimens were fabricated fo...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
11 Citations
8,492 Views
27 Pages

Rolling Shear Strength of Cross Laminated Timber (CLT)—Testing, Evaluation, and Design

  • David Glasner,
  • Andreas Ringhofer,
  • Reinhard Brandner and
  • Gerhard Schickhofer

11 November 2023

Cross laminated timber (CLT), with its typical orthogonal layering and exposure to out-of-plane bending, develops inherent rolling shear stresses. These stresses need to be checked during the ultimate limit state design process. With the ongoing revi...

(This article belongs to the Special Issue The Application and Performance of Timber in Construction)
  • Article
  • Open Access
7 Citations
2,039 Views
13 Pages

28 June 2024

Extruded polystyrene (XPS) is frequently used in the construction of many different structures. Therefore, it is necessary to appropriately characterize its mechanical properties to ensure the safety of said structures. Among the available characteri...

(This article belongs to the Section Polymer Processing and Engineering)
  • Technical Note
  • Open Access
20 Citations
4,923 Views
15 Pages

30 December 2019

The shear modulus and shear strength of extruded polystyrene foam were obtained by the in-plane shear and asymmetric four-point bending tests. In addition, the test data were numerically analysed, and the effectiveness of these tests was examined. Th...

(This article belongs to the Special Issue Hybrid Polymeric Foam Composites)
  • Article
  • Open Access
45 Citations
4,635 Views
13 Pages

Experimental Investigation on the Freeze–Thaw Resistance of Steel Fibers Reinforced Rubber Concrete

  • Tao Luo,
  • Chi Zhang,
  • Chaowei Sun,
  • Xinchao Zheng and ,
  • Yanjun Ji and
  • Xiaosa Yuan
  • + 1 author+ 0 author

10 March 2020

The reuse of rubber in concrete results in two major opposing effects: an enhancement in durability and a reduction in mechanical strength. In order to strengthen the mechanical properties of rubber concrete, steel fibers were added in this research....

(This article belongs to the Special Issue Concrete and Construction Materials)
  • Article
  • Open Access
19 Citations
5,766 Views
14 Pages

Flexure Strength and Fracture Propagation in Zirconia Ceramic Composites with Exfoliated Graphene Nanoplatelets

  • Ángela Gallardo-López,
  • Javier Castillo-Seoane,
  • Carmen Muñoz-Ferreiro,
  • Cristina López-Pernía and ,
  • Ana Morales-Rodríguez and
  • Rosalía Poyato
  • + 1 author+ 0 author

5 March 2020

In this work, the flexure strength and fracture propagation mechanisms in yttria tetragonal zirconia (3YTZP) dense composites with 1 and 5 vol.% exfoliated graphene nanoplatelets (e-GNP) were assessed. The composite powders were processed by dry plan...

(This article belongs to the Special Issue Advances in Structural Ceramic Materials)
  • Article
  • Open Access
25 Citations
8,736 Views
16 Pages

Composite Performance Evaluation of Basalt Textile-Reinforced Geopolymer Mortar

  • Hiep Le Chi,
  • Petr Louda,
  • Su Le Van,
  • Lukas Volesky and ,
  • Vladimir Kovacic and
  • Totka Bakalova
  • + 1 author+ 0 author

11 July 2019

Basalt fiber is a novel type of inorganic fiber which is produced from the extrusion of natural vocalnic basalt rocks through their melting process at high temperature. So the quality and strength characteristics of basalt fiber depend mainly on both...

(This article belongs to the Special Issue Application of Fiber Reinforced Polymers in Strengthening of Reinforced Concrete Structures)
  • Article
  • Open Access
3 Citations
2,571 Views
21 Pages

The separation of oxygen from air by means of inorganic ceramic membranes requires gas-tight ceramic–metal joints that enable reliable permeation operation in the oxygen partial pressure gradient at 850 °C. Reactive air brazing is a promisi...

(This article belongs to the Special Issue Zeolitic Membranes for Gas and Liquid Separation: Synthesis and Applications)
  • Article
  • Open Access
563 Views
40 Pages

Biaxial Cyclic Loading Test for Bauschinger Effect Characterization of Q890 High-Strength Steel

  • Lin Zhu,
  • Shuo Wang,
  • Yanli Lin,
  • Yuetong Li and ,
  • Bingyan Jing,
  • Yibo Su,
  • Leheng Huang,
  • Chunyu Ou,
  • Yingguang Zhao and
  • Zhubin He
  • + 6 authors+ 1 author

14 July 2026

Large-scale thick curved components made of high-strength steel are critical to deep-sea pressure hulls and large structural components of engineering machinery. During forming, these components experience reverse loading upon unloading, and the pron...

(This article belongs to the Special Issue Advanced Forming of Thin-Walled Materials: Microstructure, Processing and Properties)
  • Article
  • Open Access
1,284 Views
23 Pages

Ice Flexural Properties Using Four-Point Bending Test for the Ice Runway at Huhenuoer Lake

  • Qiuming Zhao,
  • Bo Zhang,
  • Ying Wang,
  • Liping Xu and ,
  • Zhixing Li,
  • Yaodong Li,
  • Xuhui Gong,
  • Xinghua Bao,
  • Jiahuan He and
  • Peng Lu
  • + 6 authors+ 1 author

25 November 2025

Seasonal lake-ice runways provide low-carbon winter infrastructure for cold-region logistics, yet direct links between ice flexural mechanics and runway design remain scarce. To address this gap, we investigated seasonal ice from Huhenuoer Lake and p...

(This article belongs to the Special Issue Advances and Challenges in the Lake, River, and Sea Ice Sciences and Engineering)
  • Article
  • Open Access
4 Citations
1,433 Views
22 Pages

Flexural Performance and Flexural Toughness Evaluation Method of High-Strength Engineered Cementitious Composites

  • Bo Chen,
  • Liang Hou,
  • Rong-Guo Yan,
  • Xiang-Yu Zhang and ,
  • Hao Meng and
  • Jing-Tian Li
  • + 1 author+ 0 author

6 November 2025

Ordinary concrete exhibits inherent brittleness, which restricts its deformation capacity and durability under extreme loading conditions. Engineered cementitious composites (ECC) have been developed to address these limitations; however, conventiona...

(This article belongs to the Special Issue High-Performance Concrete: Modification Methods, Sustainability, and Multifunctional Applications—2nd Edition)
  • Article
  • Open Access
5 Citations
2,362 Views
23 Pages

Structural Health Monitoring of Partially Replaced Carbon Fabric-Reinforced Concrete Beam

  • Ramalingam Malathy,
  • Jenifar Monica James,
  • Mayakrishnan Prabakaran and
  • Ick Soo Kim

21 August 2024

Textile-reinforced concrete (TRC) is a composite concrete material that utilizes textile reinforcement in place of steel reinforcement. In this paper, the efficacy of the partial replacement of steel reinforcement with textile reinforcement as a tech...

  • Article
  • Open Access
1 Citations
682 Views
17 Pages

Durability of Steel Bridge Deck Paving Materials Under Salt Attack in Coastal Hot–Humid Environments

  • Yujie Zhang,
  • Xiong Lan,
  • Zhenqiang Han,
  • Lei Zhu and ,
  • Peidong Du,
  • Zaiqin Chen and
  • Aimin Sha
  • + 2 authors+ 0 author

18 June 2026

Steel bridge deck pavements in coastal hot–humid regions are often exposed to the combined effects of moisture, salt, and temperature, which can accelerate material deterioration and shorten service life. To clarify the durability behavior of t...

(This article belongs to the Special Issue Polymer Materials in Road Engineering: Performance Evolution and Mechanisms)
  • Article
  • Open Access
2 Citations
904 Views
16 Pages

5 March 2026

This paper presents an evaluation of two new approaches to improve the surface quality and the mechanical properties of ceramic parts printed by fused deposition of ceramic (FDC). Dip-coating and aerosol-treatment are performed in order to reduce the...

(This article belongs to the Special Issue Advances in Ceramic and Glass Materials: Additive Manufacturing and Various Applications)
  • Article
  • Open Access
11 Citations
6,987 Views
12 Pages

14 July 2015

Both titanium and ceramic materials provide specific advantages in dental implant technology. However, some problems, like hypersensitivity reactions, corrosion and mechanical failure, have been reported. Therefore, the combining of both materials to...

(This article belongs to the Special Issue Bioceramics)
  • Article
  • Open Access
15 Citations
3,136 Views
17 Pages

Residual Flexural Performance of Epoxy Polymer Concrete under Hygrothermal Conditions and Ultraviolet Aging

  • Dongpeng Ma,
  • Zhiwei Pan,
  • Yiping Liu,
  • Zhenyu Jiang and ,
  • Zejia Liu,
  • Licheng Zhou and
  • Liqun Tang
  • + 2 authors+ 0 author

23 October 2019

Epoxy polymer concrete (EPC) has found increasing applications in infrastructure as a rising candidate among civil engineering materials. In most of its service environments, EPC is inevitably exposed to severe weather conditions, e.g., violent chang...

  • Article
  • Open Access
9 Citations
3,870 Views
12 Pages

16 December 2020

Through-Thickness Reinforcement (TTR) technologies are well suited to improving the mechanical properties in the out-of-plane direction of fibre-reinforced composites. However, besides the enhancement of delamination resistance and thus the preventio...

(This article belongs to the Section Composites Manufacturing and Processing)
  • Article
  • Open Access
1 Citations
416 Views
29 Pages

Strength of Wooden Truss Connections with Nail Plates Under Cyclic Humidity Changes

  • Marek Wieruszewski,
  • Adam Czerwiński,
  • Agnieszka Katarzyna Wdowiak-Postulak,
  • Maciej Jarzębski and
  • Adrian Trociński

21 August 2026

Metal-plate-connected (MPC) joints govern the stiffness and load-bearing performance of many prefabricated timber roof trusses, yet their response to repeated moisture changes remains critical for serviceability and durability. This study evaluated f...

(This article belongs to the Special Issue Recent Advances in Wood and Wood-Based Materials)
  • Article
  • Open Access
29 Citations
6,853 Views
10 Pages

Reliability of Different Bending Test Methods for Dental Press Ceramics

  • Daisuke Miura,
  • Yoshiki Ishida,
  • Taira Miyasaka,
  • Harumi Aoki and
  • Akikazu Shinya

16 November 2020

Objective: This study investigates the reliability of different flexural tests such as three-point-bending, four-point bending, and biaxial tests, in strengthening the dental pressed ceramics (DPCs) frequently used in clinical applications. Methods:...

  • Feature Paper
  • Article
  • Open Access
68 Citations
10,519 Views
17 Pages

Repair of Heavily Damaged RC Beams Failing in Shear Using U-Shaped Mortar Jackets

  • Constantin E. Chalioris,
  • Violetta K. Kytinou,
  • Maristella E. Voutetaki and
  • Nikos A. Papadopoulos

The effectiveness of slightly reinforced thin U-shaped cementitious mortar jacketing for the repair of damaged shear-critical reinforced concrete beams is experimentally investigated. The test project includes two parts. In the first one, five concre...

(This article belongs to the Special Issue Reliability Assessment and Sustainable Rehabilitation of Structural Systems)
  • Article
  • Open Access
84 Views
24 Pages

16 November 2026

Hybrid-reinforced concrete (HRC) beams exhibit a complex flexural response governed by the interaction between matrix cracking, fiber pull-out, and steel-bar yielding, which complicates the identification of constituent properties from global load&nd...

(This article belongs to the Special Issue Fiber-Reinforced Concrete Under Environmental, Mechanical, and Thermal Actions)
  • Article
  • Open Access
491 Views
18 Pages

Laboratory Performance of Heat-Assisted Fly Ash-Based Geopolymer Concrete as a Potential Thin Protective Layer for Asphalt Pavements

  • Krzysztof Granatyr,
  • Michał Bołtryk,
  • Katarzyna Kalinowska-Wichrowska and
  • Edyta Pawluczuk

24 July 2026

This study presents a laboratory-scale assessment of heat-assisted fly ash-based geopolymer concrete as a potential thin protective layer in one asphalt–geopolymer pavement configuration. The programme comprised water penetration under pressure...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
1 Citations
3,163 Views
13 Pages

Bending Behavior Analysis of Box Beams with the Reinforcement of Composite Materials for Wind Turbine Blades

  • Ofelia Maldonado-Santiago,
  • Jose Billerman Robles-Ocampo,
  • Eduardo Gálvez,
  • Perla Yazmin Sevilla-Camacho and ,
  • Sergio de la Cruz,
  • Juvenal Rodríguez-Reséndiz and
  • Edwin Hernández
  • + 2 authors+ 0 author

22 November 2023

Wind turbine blades in excessive wind conditions present extreme deflection problems. For this reason, an analysis of the structural response of composite reinforced box beams is developed. For this purpose, reinforced box beams were fabricated to im...

(This article belongs to the Special Issue The Use of Fibers in the Field of Structural and Earthquake Engineering: Experimental Measurements and Numerical Simulations)
  • Article
  • Open Access
7 Citations
4,266 Views
11 Pages

18 October 2021

This study compares the absolute and relative stabilities of a novel hybrid dorsal double plating (HDDP) to the often-used dorsal double plating (DDP) under distal radius fracture. The “Y” shape profile with 1.6 mm HDDP thickness was obtained by comb...

(This article belongs to the Special Issue New Advances in Mechanical Behaviour of Biomaterials)
  • Article
  • Open Access
38 Citations
3,519 Views
15 Pages

Flexural Creep Behaviour of Pultruded GFRP Composites Cross-Arm: A Comparative Study on the Effects of Stacking Sequence

  • Abdulrahman Alhayek,
  • Agusril Syamsir,
  • Abu Bakar Mohd Supian,
  • Fathoni Usman and ,
  • Muhammad Rizal Muhammad Asyraf and
  • Mohd Afdzaluddin Atiqah
  • + 1 author+ 0 author

25 March 2022

Pultruded glass fibre reinforced polymer (pGFRP) composites provide outstanding properties for composite polymer cross arms in power transmission line applications. This study has investigated the effects of various stacking sequences of fibres direc...

(This article belongs to the Special Issue Mechanical Properties of Fiber Reinforced Polymer Composites)
  • Article
  • Open Access
8 Citations
6,043 Views
17 Pages

31 January 2019

To develop orthopedic implants that are optimized for each patient’s needs or skeletal structure (custom-made implants), evaluations of the bending strength, bending stiffness, and durability of various types of conventional osteosynthesis devi...

(This article belongs to the Section Biomaterials)
  • Proceeding Paper
  • Open Access
1,464 Views
8 Pages

Bending Behavior of the 95% and 99% Alumina Ceramics

  • Sergiu-Valentin Galatanu,
  • Victor Tiberiu Popi,
  • Cosmin-Florin Popa and
  • Liviu Marsavina

30 December 2025

Alumina ceramics, known for their hardness, thermal resistance, and chemical stability, are widely applied in engineering and industry. This study investigates the flexural strength of 95% and 99% alumina ceramics using tubes with two or four cross-s...

(This article belongs to the Proceedings of The 8th International Conference of Engineering Against Failure)
  • Article
  • Open Access
7 Citations
4,187 Views
14 Pages

Relationship between Stalk and Cob Mechanical Strength during the Late Growth Stage of Maize (Zea mays L.)

  • Jun Xue,
  • Qun Wang,
  • Hongyan Li,
  • Yinghu Fan and ,
  • Lulu Li,
  • Ruizhi Xie,
  • Keru Wang,
  • Bo Ming,
  • Peng Hou and
  • Shaokun Li
  • + 5 authors+ 0 author

17 October 2020

The stalk strength of maize (Zea mays L.) has a significant effect on stalk lodging and harvesting loss, and the cob mechanical strength affects the grain broken rate in mechanical grain harvesting. Clarifying the relationship between maize stalk str...

  • Article
  • Open Access
2 Citations
2,220 Views
25 Pages

Rigid particle models (PMs) that explicitly consider the influence of the aggregate structure and its physical interaction mechanisms have been used to predict cracking phenomena in concrete. PMs have also been applied to reinforced concrete fracture...

  • Article
  • Open Access
18 Citations
4,661 Views
18 Pages

20 January 2021

To investigate the residual bending strength of a corroded H-shaped steel beam in an underground coal mining environment, the law governing the degradation of the mechanical properties of corroded steel was first investigated through tensile testing....

  • Article
  • Open Access
3 Citations
2,431 Views
22 Pages

Mechanical Performance of Wood–Plastic Composites from Sawdust and Recycled Bottle Cap Polyolefins (PP/HDPE) for Temporary Concrete Formwork

  • José Carlos Rosas Valencia,
  • José Pablo Balderas Rojas,
  • José Luis Reyes Araiza,
  • José de Jesús Pérez Bueno and ,
  • Maria Luisa Mendoza López,
  • Alejandro Manzano-Ramírez and
  • Saúl Antonio Obregón Biosca
  • + 2 authors+ 0 author

26 November 2025

This study quantifies the mechanical behavior of 10–15 mm thick WPC boards compression-molded from post-consumer bottle-cap polyolefins (PP/HDPE, 70/30 wt%) and pine sawdust (0, 10, 20 wt%). Flexural and tensile strength/modulus are determined...

(This article belongs to the Special Issue Sustainable Polymer Composites: Waste Reutilization and Valorization)
  • Article
  • Open Access
7 Citations
6,001 Views
23 Pages

2 February 2023

With the assessment of intermediate crack debonding (ICD) being a subject of main importance in the design of reinforced concrete (RC) beams strengthened in flexure with externally bonded fibre-reinforced polymer (FRP), several approaches to predict...

(This article belongs to the Special Issue Fiber-Reinforced Polymer Composites in Construction Materials)
  • Article
  • Open Access
7 Citations
3,258 Views
21 Pages

17 September 2021

This paper presents a new strategy in the use of wood of heterogeneous quality for composing LVL products. The idea is to consider veneers representative of the resource variability and retain local stiffness information to control panel manufacturin...

(This article belongs to the Special Issue Composites from Recycled and Modified Woods – Technology, Properties, Application)
  • Article
  • Open Access
3 Citations
2,869 Views
18 Pages

4 June 2024

The present paper investigates flaw strength distributions established using various flexural tests on batches of SiC bar test specimens, namely four-point bending as well as three-point bending tests with different span lengths. Flaw strength is pro...

(This article belongs to the Special Issue Advances in Ceramics, 2nd Edition)
  • Proceeding Paper
  • Open Access
1,804 Views
8 Pages

Combining Additive Manufacturing Techniques for High-Performance Stiffened Panels

  • Alberto Pedreira,
  • Adrián Rodríguez,
  • Noelia González-Castro,
  • Beatriz Simoes-Pereira and
  • Pablo Romero-Rodriguez

The additive manufacturing of high-performance thermoplastics, including high-temperature materials and continuous fiber reinforcement, are extensively being developed worldwide. In this work, we combined laser-assisted in situ consolidation tape lay...

(This article belongs to the Proceedings of The 14th EASN International Conference on “Innovation in Aviation & Space Towards Sustainability Today & Tomorrow”)
  • Article
  • Open Access
16 Citations
4,366 Views
15 Pages

Experimental Investigation on Dowel Laminated Timber Made of Uruguayan Fast-Grown Species

  • Gastón Bruzzone,
  • Daniel Godoy,
  • Sebastián Quagliotti,
  • Stephany Arrejuría and ,
  • Silvia Böthig and
  • Laura Moya
  • + 1 author+ 0 author

9 November 2023

This study aims to evaluate the structural behaviour of dowel laminated timber (DLT) made of fast-growing pine and eucalyptus lamellae and different dowel diameters. Shear tests on dowelled connections and four-point bending tests on structural size...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
1,002 Views
21 Pages

Development of Formulas Predicting Bending Moments of Elastic–Plastic and Bi-Modular-Layered Particleboards

  • Yan Wang,
  • Samet Demirel,
  • Wengang Hu,
  • Franklin Quin and ,
  • Jilei Zhang,
  • Shunyao Sun and
  • Xiaohong Yu
  • + 2 authors+ 0 author

12 August 2025

Four mechanical models were proposed to derive formulas predicting the bending moment capacities of layered particleboard under simply supported center-loading. Experimental validation confirmed these models are effective tools for describing the ben...

(This article belongs to the Special Issue Measurement and Enhancement of Wood Mechanical and Chemical Properties, 2nd Edition)
  • Article
  • Open Access
26 Citations
2,974 Views
23 Pages

The Influence of Three-Dimensionally Printed Polymer Materials as Trusses and Shell Structures on the Mechanical Properties and Load-Bearing Capacity of Reinforced Concrete

  • Mohammad Hematibahar,
  • Ali Hasanzadeh,
  • Makhmud Kharun,
  • Alexey N. Beskopylny and ,
  • Sergey A. Stel’makh and
  • Evgenii M. Shcherban’
  • + 1 author+ 0 author

10 July 2024

Three-dimensional printing technology (3D printing) is becoming a more and more popular technology for aerospace, biology, medicine, mechanics, civil and other engineering fields. In civil engineering, researchers and engineers attempt to print const...

  • Article
  • Open Access
13 Citations
3,085 Views
11 Pages

Mechanical Characterization of Glued Laminated Beams Containing Selected Wood Species in the Tension Zone

  • Adam Derkowski,
  • Marcin Kuliński,
  • Adrian Trociński,
  • Jakub Kawalerczyk and
  • Radosław Mirski

14 September 2022

The aim of this study was to determine the mechanical properties of laminated beams containing selected wood species in the tension zone using a four-point bending test. Three beam types were manufactured with respect to the timber used in the tensio...

(This article belongs to the Special Issue Trends on the Wood Materials and Technologies)
  • Article
  • Open Access
16 Citations
4,601 Views
14 Pages

17 May 2023

Specifications are available to quantify flexural performance of steel-fiber reinforced concrete beams with several parameters. Each specification provides different results. This study comparatively evaluates existing flexural beam test standards th...

(This article belongs to the Special Issue Advanced Steel Structures and Concrete for Sustainable Applications)
  • Article
  • Open Access
5 Citations
2,430 Views
26 Pages

The Use of Artificial Neural Networks for Determining Values of Selected Strength Parameters of Miscanthus × Giganteus

  • Sławomir Francik,
  • Bogusława Łapczyńska-Kordon,
  • Norbert Pedryc,
  • Wojciech Szewczyk and ,
  • Renata Francik and
  • Zbigniew Ślipek
  • + 1 author+ 0 author

6 March 2022

The aim of this paper is to develop neural models enabling the determination of biomechanical parameters for giant miscanthus stems. The static three-point bending test is used to determine the bending strength parameters of the miscanthus stem. In t...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
13 Citations
2,871 Views
15 Pages

3 March 2023

The microscopic anisotropy of shale has an important impact on its mechanical properties and crack behavior, so it is essential to understand the microscopic origin of anisotropic growth with a more effective laboratory work scheme. Uniaxial compress...

(This article belongs to the Special Issue Advances in Petroleum Geology and Unconventional Oil and Gas)
  • Article
  • Open Access
5 Citations
3,740 Views
13 Pages

Damage Evolution and Fracture Events Sequence Analysis of Core-Shell Nanoparticle Modified Bone Cements by Acoustic Emission Technique

  • O.F. Pacheco-Salazar,
  • Shuichi Wakayama,
  • L.A. Can-Herrera,
  • M.A.A. Dzul-Cervantes and ,
  • C.R. Ríos-Soberanis and
  • J.M. Cervantes-Uc
  • + 1 author+ 0 author

15 January 2020

In this research, damage in bone cements that were prepared with core-shell nanoparticles was monitored during four-point bending tests through an analysis of acoustic emission (AE) signals. The core-shell structure consisted of poly(butyl acrylate)...

(This article belongs to the Special Issue Assessment of the Ageing and Durability of Polymers II: Procedures and Reliability)
  • Article
  • Open Access
26 Citations
2,599 Views
25 Pages

9 October 2023

This study presents an experimental framework with seventeen beams to investigate the impact of loading type, configuration, and through-bolt anchorage on LC-GFRP (Low-Cost Glass-Fiber-Reinforced Polymer) confinement performance. Beams underwent thre...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
2 Citations
2,783 Views
26 Pages

9 October 2022

In this paper, a new deck plate system, in which the top chords are infilled with high-performance cement-based material such as high-strength mortar and UHPC (ultra-high performance concrete), was proposed. The bending capacity of the proposed deck...

(This article belongs to the Section Sustainable Urban and Rural Development)
  • Technical Note
  • Open Access
4 Citations
2,821 Views
16 Pages

The present paper aims to study the crack propagating behavior of a stiffened plate under tensile and bending displacement load loads. The extended finite element method (XFEM) is used to analyze the residual ultimate strength of stiffened plates wit...

(This article belongs to the Special Issue Strength of Ship Structures)
  • Article
  • Open Access
378 Views
15 Pages

7 September 2026

European beech (Fagus sylvatica L.) was modified by thermal treatment at 180 °C, oligomeric lactic acid (OLA) impregnation followed by catalyst-free polymerization (120 or 160 °C), and their combined application to evaluate changes in mechani...

(This article belongs to the Special Issue Variability in Wood Properties: Growth Conditions, Species and Anatomical Adaptations)
  • Article
  • Open Access
30 Citations
7,506 Views
14 Pages

Flexural Behavior of Carbon Textile-Reinforced Geopolymer Composite Thin Plate

  • Hiep Le Chi,
  • Petr Louda,
  • Aravin Prince Periyasamy,
  • Totka Bakalova and
  • Vladimir Kovacic

8 November 2018

Textile-reinforced Portland cement-based concrete has been researched and developed over the last few decades. It was widely used in a different range of applications, such as repair and/or strengthening of structural elements, thin walls, lightweigh...

  • Article
  • Open Access
11 Citations
3,756 Views
13 Pages

Application of Temperature and Process Duration as a Method for Predicting the Mechanical Properties of Thermally Modified Timber

  • Demiao Chu,
  • Redžo Hasanagić,
  • Atif Hodžić,
  • Davor Kržišnik and ,
  • Damir Hodžić,
  • Mohsen Bahmani,
  • Marko Petrič and
  • Miha Humar
  • + 3 authors+ 0 author

31 January 2022

This study aims to investigate the influence of thermal modification (TM) on the physical and mechanical properties of wood. For this purpose, the experimental part focused on selected influential parameters, namely temperature, residence time, and d...

(This article belongs to the Special Issue Thermal Modification of Wood: Process and Properties)

of 9