This study developed a DC-free technique that used dark-mode scanning capacitance microscopy (DM-SCM) with a small-area contact electrode to evaluate and image equivalent oxide thicknesses (EOTs). In contrast to the conventional capacitance–vol...
We created tri-gate sub-100 nm In0.53Ga0.47As metal-oxide-semiconductor-field-effect-transistors (MOSFETs) with a bi-layer Al2O3/HfO2 gate stack and investigated the scaling effects on equivalent-oxide-thickness (EOT) and fin-width (Wfin) at gate len...
A comprehensive study on the ternary dielectric, LaGdO3, synthesized and qualified in our laboratory as a novel high-k dielectric material for logic and memory device applications in terms of its excellent features that include a high linear dielectr...
In this work, two stacked gate dielectrics of Al2O3/tetraethyl-orthosilicate (TEOS) oxide were deposited by using the equivalent capacitance with 100-nm thick TEOS oxide on the patterned InGaZnO layers to evaluate the electrical characteristics and s...
Combining ellipsometric and EIS methods, the dielectric constant ε for the oxide Nb2O5 at room temperature was determined. At first, the linear dependence between anodization voltage and oxide thickness was established in the form d = 2.14 (&...
In this study, the channel potential of inhibited strings in 3D NAND flash memory using a bandgap-engineered tunneling oxide (BE-TOX) structure is analyzed. The equivalent oxide thickness (EOT) of the structure using BE-TOX was designed to be the sam...
This paper presents impedance measurements of ferroelectric structures involving lead-free oxide and polymer-oxide composite coatings for sensing and energy harvesting applications. Three different ferroelectric materials grown by conventional microf...
High-k/n-InAlAs MOS capacitors are popular for the isolated gate of InAs/AlSb and InAlAs/InGaAs high-electron mobility transistors. In this study, a new kind of high-k/n-InAlAs MOS-capacitor with a HfO2–Al2O3 laminated dielectric was successful...
The rate of photocatalytic oxidation of polystyrene over 0.1 wt% copper-doped TiO2 catalyst spin coated onto a flat substrate is investigated as a function of the catalyst deposition spin speed and, hence, film thickness. Photoinduced force microscop...
This paper presents the results of theoretical and experimental studies to determine the optimal thickness of thermal insulation from basalt fiber and aerogel products for pipelines at temperatures of 300 and 600 °C. We carried out a comparison o...
Non-enzymatic electrochemical glucose sensing was obtained by gold nanostructures on graphene paper, produced by laser or thermal dewetting of 1.6 and 8 nm-thick Au layers, respectively. Nanosecond laser annealing produces spherical nanoparticles (Au...
Functional materials, in the combination of lignocelluloses, known as natural fibers, with oxide materials, can result in cultivating functional properties such as flexibility, relativity good electrical conduction, good electrical charge storage cap...
Controlling monolayer Si oxide at the HfO2/Si interface is a challenging issue in scaling the equivalent oxide thickness of HfO2/Si gate stack structures. A concept that the author proposes to control the Si oxide interface by using ultra-high vacuum...
The recent report of a p-type graphene(Gr)/carbon-nanotube(CNT) barristor facilitates the application of graphene barristors in the fabrication of complementary logic devices. Here, a complementary inverter is presented that combines a p-type Gr/CNT...
Conveyance tube manufacturing via a hot-finished, welded route is an energy-intensive process that promotes the rapid surface oxidation of curved surfaces. Previous studies have used computational and theoretical techniques to assess the oxidation of...
The problem of the optimization of properties for biocompatible coatings as functional materials requires in-depth understanding of the coating formation processes; this allows for precise manufacturing of new generation implantable devices. Plasma e...
Pulmonary hypertension (PH) complicates bronchopulmonary dysplasia (BPD) in 25% of infants. Superoxide dismutase 2 (SOD2) is an endogenous mitochondrial antioxidant, and overexpression protects against acute lung injury in adult mice. Little is known...
The fuel cladding is one of the most important structural components for maintaining the integrity of a fuel channel and for safely exploitation of a nuclear power plant. The corrosion behavior of a fuel cladding material, Zy-4, under high pressure a...
A comprehensive study of the electrical and physical characteristics of Lanthanum Aluminate (LaAlO3) high-dielectric-constant gate oxides for advanced CMOS devices was performed. The most distinctive feature of LaAlO3 as compared with Hf-based high-k...
A transparent metamaterial absorber (MMA) with both tunable absorption bandwidth and low infrared (IR) emissivity is proposed in this paper. The MMA is hierarchical, which consists of an infrared shielding layer (IRSL), two radar-absorption layers (R...
In this paper, optical losses in CdS/CdTe solar cells are calculated on the basis of the designated reflective index of various frontal layers using an OPAL2 calculator for the first time. Two types of glass (0.1 mm ultra-thin Schott and 1.1 mm stand...
Radiative cooling is an effective technology with zero energy consumption to alleviate climate warming and combat the urban heat island effect. At present, researchers often use foam boxes to isolate non-radiant heat exchange between the cooler and t...
Current status and challenges of aggressive equivalent-oxide-thickness (EOT) scaling of high-κ gate dielectrics via higher-κ ( > 20) materials and interfacial layer (IL) scavenging techniques are reviewed. La-based higher-κ materials show aggressive...
The gamma mass (µm) and linear (µ) attenuation coefficients of polycarbonate-bismuth oxide composites (PC-Bi2O3) with different bismuth oxide weight factors were investigated theoretically using EpiXS and a Monte Carlo simulation-based to...
Graphite felt (GF) is a multi-functional material and is widely used as electrodes of electrochemical devices for energy and environmental applications. However, due to the inherent hydrophobicity of graphite felt, it must be hydrophilically pretreat...
HfO2 based thin-film ferroelectrics are metastable at room temperature and transited to the dielectric monoclinic phase upon heating. The thermal stability of such ferroelectrics increases when thin-film oxides are buried (BOX) in silicon–ferro...
Electrodeposition of Pb on Au has been of interest for the variety of surface phenomena such as the UnderPotential Deposition (UPD) and surface alloying. Here, we examined the interface between the electrodeposited Pb film on Au, using surface sensit...
In this paper, we design an ultra-thin broadband transparent absorber based on indium tin oxide (ITO) film, and we choose polymethyl methacrylate (PMMA) high-transmittance dielectric sheet instead of the traditional dielectric sheet and polyethylene...
This paper presents an advanced dielectric engineering approach utilizing a composition-dependent hafnium zirconium oxide (Hf1-xZrxO2) superlattice (SL) structure for Si nanosheet gate-all-around field-effect transistors (Si NSGAAFETs). The dielectri...
As one of the highest mobility semiconductor materials, carbon nanotubes (CNTs) have been extensively studied for use in field effect transistors (FETs). To fabricate surround-gate FETs— which offer the best switching performance—depositi...
In this study, the effects of the total ionizing dose (TID) on a nanowire (NW) field-effect transistor (FET) and a nanosheet (NS) FET were analyzed. The devices have Gate-all-around (GAA) structure that are less affected by TID effects because GAA st...
Thin films of gadolinium-doped ceria (GDC) nanoparticles were fabricated as electrolytes for low-temperature solid oxide fuel cells (SOFCs) by combining electrophoretic deposition (EPD) and the successive ionic layer adsorption and reaction-air spray...
The growing demand for compact, low-power infrared (IR) sensors necessitates advanced solutions for on-chip spectral selectivity, particularly for integration with Thermal Metal-Oxide-Semiconductor (TMOS) devices. This paper investigates the design a...
We propose a novel langasite crystal microbalance (LCM) sensor with a graphene-based sensing medium to detect and discriminate volatile organic compounds (VOCs) at room temperature. A thin film of graphene oxide embedded with Pt nanostructures (GO-Pt...
This study presents the characteristics of HfAlO films for a series of Al incorporation ratios into a HfO2 dielectric by atomic layer deposition on a Si substrate. A small amount of Al doping into the HfO2 film can stabilize the tetragonal phase of t...
Willow wood presents a real interest for biomass pyrolysis due to its fast growth, renewability, and high energy density. Following the pyrolysis of willow wood in an inert atmosphere, a multi-fuel gaseous mixture was obtained, with the following com...
The equivalent characteristics of the materials’ interfaces are known to impact the overall mechanical properties of ceramic–metal composites significantly. One technological method that has been suggested is raising the temperature of th...
Analog layouts often use matched devices to reduce sensitivity to process gradients. However, the resulting interconnect can introduce parasitic coupling. We compare four DRC-clean, LVS-equivalent layouts of the same hysteresis comparator, implemente...
In the present article, the degradation of the tensile properties of polyacrylonitrile (PAN)-based carbon fibers at elevated temperatures in air was studied experimentally and modeled. The tensile properties, mass loss, surface morphology, and elemen...
This study aims to bridge various diagnostic tools for the development of smart plasma electrolytic oxidation (PEO) technologies. PEO treatments of commercially pure Zr were carried out using the pulsed unipolar polarisation (PUP) regime with frequen...
Atomic oxygen in low Earth orbit erodes polyimide, increasing surface roughness and degrading performance. The reactive species scission polymer chains and remove surface material, exposing fresh sites that accelerate further attack and disrupt therm...
This work theoretically determined the high-energy photon shielding properties of high-density polyethylene (HDPE) composites containing rare-earth oxides, namely samarium oxide (Sm2O3), europium oxide (Eu2O3), and gadolinium oxide (Gd2O3), for poten...
The performance and reliability of 4H-SiC Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) are largely determined by the material properties of gate dielectric films and the quality of the dielectric/SiC interface. This paper provides a s...
Lysine carboxymethyl cysteinate (LCC) has been identified as a glutathione (GSH) precursor for the use of cosmetic products, providing a defense against oxidative stress by elevating GSH levels, and mitigating UVB-induced pigmentation and barrier dis...
This work reports, for the first time, the phenomenon of lateral Poole–Frenkel current conduction along the dielectric/Si interface of a silicon nanowire metal-oxide semiconductor (MOS) transistor. This discovery has a great impact on the study...
The primary purpose of this study was to produce an ore-based high-capacity supercapacitor electrode. For this, chalcopyrite ore was first leached with nitric acid, and then metal oxide synthesis was carried out immediately on nickel foam using a hyd...
This paper presents the FEM modeling and simulation of a thin-film bulk acoustic resonator (FBAR) for a tetrachloroethene (PCE) gas-sensing application. A zinc oxide layer is used as a piezoelectric material; an aluminum layer is used as the electrod...
Visual impairments pose a significant global health challenge, and visual electrophysiological (EP) acquisition plays a pivotal role in diagnosing ophthalmic diseases. However, traditional electrodes still encounter limitations such as inadequate mec...
Bipolar plates in proton exchange membrane fuel cells (PEMFCs) are confronted by the dilemma of low contact resistance and high corrosion resistance; this study aimed to simultaneously satisfy these dimensions in a harsh environment. Using thick mult...
With the development of high-density integrated chips, low-k dielectric materials are used in the back end of line (BEOL) to reduce signal delay. However, due to the application of fine-pitch packages with high-hardness copper pillars, BEOL is suscep...
of 2