Skip to Content
You are currently on the new version of our website. Access the old version .

180 Results Found

  • Article
  • Open Access
8 Citations
3,209 Views
33 Pages

Effect of Using Glass Fiber Reinforced Polymer (GFRP) and Deformed Steel Bars on the Bonding Behavior of Lightweight Foamed Concrete

  • Suhad M. Abd,
  • Rafal Hadi,
  • Shaker Abdal,
  • Saba Shamim and ,
  • Hadee Mohammed Najm and
  • Mohanad Muayad Sabri Sabri
  • + 1 author+ 0 author

26 April 2023

The study aims to conduct a direct pull-out test on fifty-four cube specimens considering different variables, including the type of reinforcement (sand-coated glass fiber-reinforced polymer (GFRP) and ribbed steel bars); the type of concrete (normal...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
347 Views
12 Pages

Effect of Pulling Direction on Destructive Tree-Pulling Tests in Hemiboreal Scots Pine Stands in Northern Europe

  • Andris Seipulis,
  • Valters Samariks,
  • Roberts Matisons,
  • Didzis Elferts and
  • Oskars Krišāns

17 September 2026

Static pulling tests are essential for evaluating tree mechanical stability, hence the ability to sustain wind loading. In the tests, the trees are usually pulled in one direction, which can raise concerns about the bias of the estimates due to thigm...

(This article belongs to the Section Forest Ecology and Management)
  • Article
  • Open Access
7 Citations
4,149 Views
25 Pages

Bond Behavior of Basalt Fiber Reinforced Polymer Bars in Recycled Coarse Aggregate Concrete

  • Ahmed Godat,
  • Ebtesam Alghafri,
  • Noura Al Tamimi,
  • Hamda Aljaberi and
  • Shaima Aldaweela

25 January 2022

This study is an experimental investigation of the bond stress–slip behavior of BFRP bars in recycled coarse aggregate concrete using the pull-out experiment. The experimental program contains twenty-three BFRP specimens and twelve specimens wi...

(This article belongs to the Section Sustainable Materials)
  • Article
  • Open Access
13 Citations
4,514 Views
11 Pages

18 May 2024

The emergence of additive manufacturing technologies for fiber-reinforced thermoset composites has greatly bolstered their utilization, particularly within the aerospace industry. However, the ability to precisely measure the interface strength betwe...

(This article belongs to the Special Issue Carbon Fiber Reinforced Polymers (2nd Edition))
  • Article
  • Open Access
7 Citations
5,949 Views
13 Pages

A Method for Measuring Hydrodynamic Force Coefficients Applied to an Articulated Concrete Mattress

  • Hongwei An,
  • Xiaoyuan Hu,
  • Scott Draper,
  • Liang Cheng and ,
  • Binsar Lubis and
  • Mehrdad Kimiaei
  • + 1 author+ 0 author

A physical model testing method to determine the hydrodynamic force coefficients of an object is proposed and applied to an articulated concrete mattress placed on a flat surface under steady current condition. The test setup, which comprises of a pu...

(This article belongs to the Special Issue Instability and Failure of Subsea Structures)
  • Article
  • Open Access
633 Views
21 Pages

24 April 2026

Long-distance pulling of submarine cables inside horizontal directional drilling (HDD) steel casings is often limited by high interfacial resistance, rapid pulling-force accumulation, and poor adaptability to muddy-sandy environments. In addition, co...

(This article belongs to the Special Issue Innovations in Building Foundations and Geotechnical Materials: Sustainable Technologies and Engineering Performance)
  • Communication
  • Open Access
11 Citations
5,317 Views
9 Pages

29 November 2018

The medical polypropylene monofilament with a diameter of 0.10 mm was used as the material. Four different pull densities and two different warp run-ins were set up on the electronic traverse high-speed Tricot warp knitting machine, with the gauge of...

  • Article
  • Open Access
10 Citations
3,721 Views
10 Pages

Precision Balance Assessment in Parkinson’s Disease: Utilizing Vision-Based 3D Pose Tracking for Pull Test Analysis

  • Nina Ellrich,
  • Kasimir Niermeyer,
  • Daniela Peto,
  • Julian Decker and ,
  • Urban M. Fietzek,
  • Sabrina Katzdobler,
  • Günter U. Höglinger,
  • Klaus Jahn,
  • Andreas Zwergal and
  • Max Wuehr
  • + 5 authors+ 0 author

6 June 2024

Postural instability is a common complication in advanced Parkinson’s disease (PD) associated with recurrent falls and fall-related injuries. The test of retropulsion, consisting of a rapid balance perturbation by a pull in the backward directi...

(This article belongs to the Special Issue Wearable Sensors for Monitoring Athletic and Clinical Cohorts)
  • Article
  • Open Access
14 Citations
3,156 Views
15 Pages

21 November 2022

For projects such as roads and railways, different fillers are often selected, and these also relate to the area where the project is located, so the characteristics of the filling soil should be considered in the design. However, the characteristics...

(This article belongs to the Special Issue State-of-the-Art of Geosynthetic Engineering for Sustainable Construction)
  • Article
  • Open Access
1,101 Views
16 Pages

18 January 2026

Interfacial adhesion between selective laser-melted (SLM) AlSi10Mg and polyimide (PI) insulating coatings is often limited by mismatched physicochemical properties. To improve adhesion, Al-rich and Si-rich microstructured surfaces were fabricated on...

(This article belongs to the Special Issue Friction, Wear and Surface Engineering of Materials)
  • Article
  • Open Access
10 Citations
3,910 Views
15 Pages

An Investigation of Pull-Out Force of Semi-Buried Lotus Roots after Hydraulic Scouring

  • Rong Zeng,
  • Yitao Lin,
  • Zhihua Wan,
  • Ming Tu and ,
  • Jun Jiao and
  • Guozhong Zhang
  • + 1 author+ 0 author

Hydraulic scouring is the most effective approach to harvest lotus roots, but its application is largely restricted by the low harvesting rate. After hydraulic scouring, some mature lotus roots are still partially buried in the soil. Therefore, it is...

(This article belongs to the Special Issue Agricultural Structures and Mechanization)
  • Article
  • Open Access
2 Citations
6,368 Views
16 Pages

Effect of Eight-Week Transcranial Direct-Current Stimulation Combined with Lat Pull-Down Resistance Training on Improving Pull-Up Performance for Male College Students

  • Qian Li,
  • Jiaqi Yan,
  • Hanya Dai,
  • Minjie Qiao and ,
  • Mingxin Gong,
  • Wenxin Niu,
  • Ye Yang and
  • Lejun Wang
  • + 3 authors+ 0 author

20 January 2025

The aim of this study was to investigate the effects and potential mechanisms of 8-week transcranial direct-current stimulation (tDCS) combined with resistance training (RT) on pull-up performance in male college students. Twenty-five male college st...

(This article belongs to the Section Physiology and Pathology)
  • Article
  • Open Access
8 Citations
5,200 Views
15 Pages

28 July 2019

The single-well push-pull tracer test is a convenient and cost-effective tool to estimate hydrogeological properties of a subsurface aquifer system. However, it has a limitation that test results can be affected by various experimental designs. In th...

(This article belongs to the Section Hydrology)
  • Article
  • Open Access
5 Citations
3,071 Views
13 Pages

6 September 2023

Background: Several analytical methods for the fiber pull-out test have been developed to evaluate the bond strength of fiber–matrix systems. We aimed to investigate the debonding mechanism of a fiber–silicone pull-out specimen and valida...

(This article belongs to the Special Issue Organic-Inorganic Hybrid Materials III)
  • Article
  • Open Access
8 Citations
2,845 Views
15 Pages

In this paper, a yacht project in Tingjiang Town, Mawei, Fujian, is suggested as an example of a barge type breakwater made out of scrap barges. The physical modelling of a two-dimensional flume wave test was carried out on a barge-type breakwater, f...

(This article belongs to the Section Coastal Engineering)
  • Article
  • Open Access
8 Citations
2,591 Views
15 Pages

23 April 2025

Background: Prolonged manual wheelchair usage often leads to musculoskeletal disorders in the upper body of individuals with spinal cord injury (SCI) due to repetitive, unidirectional movements. To mitigate these issues, targeted exercise of the back...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
5 Citations
3,301 Views
23 Pages

Failure Behavior and Surrounding Soil Stress Responses of Suction Anchor in Low-Strength Muddy Clay

  • Jiwei Luo,
  • Xiaoqiang Liu,
  • Xianpeng Liu,
  • Dianjun Zuo and ,
  • Xiaoyu An and
  • Liqiang Yu
  • + 1 author+ 0 author

17 November 2023

Anchorage failure of a suction anchor is more likely to occur in low-strength muddy clay. This paper focuses on the failure behaviors of suction anchors and muddy clay stress responses. The centrifugal model test was used to study the loading process...

(This article belongs to the Special Issue Wave Loads on Offshore Structure)
  • Article
  • Open Access
1 Citations
675 Views
19 Pages

21 April 2026

Iron-based shape memory alloy (Fe-SMA) fibers can enhance cementitious composites through both crack bridging and thermally activated recovery stresses. Since fiber pull-out governs load transfer at the micro scale, understanding the combined effects...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
2,365 Views
20 Pages

Study of the Load-Bearing Characteristics of Bolts under Asymmetric Freezing Conditions

  • Jie Dong,
  • Xin Yan,
  • Zhao-Qi Li,
  • Yang Liu and ,
  • Ying-Hao Zheng and
  • Kai Feng
  • + 1 author+ 0 author

2 March 2023

To investigate the load-bearing characteristics of anchor rods under asymmetric freezing conditions such as those in cold regions and the effect of frost swelling, a model test device was developed using a controlled-temperature environmental box and...

  • Article
  • Open Access
8 Citations
4,735 Views
14 Pages

Experimental & FEM Analysis of Orthodontic Mini-Implant Design on Primary Stability

  • Elmedin Mešić,
  • Enis Muratović,
  • Lejla Redžepagić-Vražalica,
  • Nedim Pervan and ,
  • Adis J. Muminović,
  • Muamer Delić and
  • Mirza Glušac
  • + 2 authors+ 0 author

12 June 2021

The main objective of this research is to establish a connection between orthodontic mini-implant design, pull-out force and primary stability by comparing two commercial mini-implants or temporary anchorage devices, Tomas®-pin and Perfect Anchor. Mi...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Article
  • Open Access
3 Citations
2,480 Views
24 Pages

22 October 2024

A thorough procedure was developed to efficiently manufacture dogbone samples using focused ion beam (FIB) milling for micro-tensile testing. A Bruker PI 89 PicoIndenter, Billerica, MA, USA, was used as a case study, although the analysis and results...

  • Article
  • Open Access
5 Citations
3,857 Views
14 Pages

4 March 2024

With the advancement of China’s wind power industry, research into full-scale structural testing of wind turbine blades, including static testing and fatigue testing, has shown increasing significance. Static testing measures the deflection at...

  • Article
  • Open Access
2 Citations
2,406 Views
14 Pages

Experimental Study on Bond Behavior of Glass Textile Mesh in Earth-Based Matrix

  • Weinan Han,
  • Feng Wu,
  • Yugang Zhao,
  • Haitao Wang and
  • Shenglin Chu

29 January 2023

The bond behavior between the textile and the earth-based matrix determined the reinforcement effectiveness of the composite systems. This paper presented a pull-out experimental study on the glass textile mesh reinforced earth-based matrix. The bond...

(This article belongs to the Special Issue Advanced Composite Materials for Structural Maintenance, Repair, and Control)
  • Article
  • Open Access
8 Citations
2,826 Views
15 Pages

6 November 2019

Geotextile tubes are used in dam construction because fine tailings are difficult to use. The shear characteristics of geotextile tubes during dam operation are closely related to those of the materials used to construct the tubes. Pull-out tests can...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
82 Citations
8,378 Views
14 Pages

Investigation of Bonding Behavior of FRP and Steel Bars in Self-Compacting Concrete Structures Using Acoustic Emission Method

  • Bo Di,
  • Jingkai Wang,
  • Haotian Li,
  • Jinhang Zheng and ,
  • Yu Zheng and
  • Gangbing Song
  • + 1 author+ 0 author

4 January 2019

To extend understanding of the bonding behavior of fiber reinforced polymer (FRP) and steel bars in self-compacting concrete (SCC), an experimental series consisting of 36 direct pull-out tests monitored by acoustic emission (AE) were performed in th...

(This article belongs to the Special Issue Smart Sensors and Smart Structures)
  • Article
  • Open Access
2 Citations
2,355 Views
10 Pages

Development of a Cone Penetration Testing Apparatus with a Textured Shaft

  • Tae-Young Kim,
  • Kyung-Hoon Jung and
  • Song-Hun Chong

5 November 2024

The anisotropy of shear resistance depending on friction direction can be selectively utilized in geotechnical structures. For instance, deep foundations and soil nailing, which are subject to axial loads, benefit from increased load transfer due to...

  • Article
  • Open Access
1 Citations
906 Views
14 Pages

26 September 2025

Soil strengthening with hydraulic binders has gained popularity in recent years and provides an alternative to traditional methods, both for foundation reinforcement and for retaining walls. In many cases, columns, walls, or soil-cement mix blocks re...

  • Article
  • Open Access
7 Citations
2,911 Views
13 Pages

7 October 2022

In order to study the bond-slip constitutive model between prestressed tendons and concrete, the pull-out tests of single-strand and multi-strands specimens are carried out. The effect of the number of prestressed tendons on the failure mode, slip ch...

(This article belongs to the Topic Environmental Sensitivity and Safety Assessment of Materials)
  • Article
  • Open Access
3 Citations
1,806 Views
33 Pages

On the Uprooting Stability of Trees: Combined Loading Effect on Tree Stability Assessment

  • Matteo Andreozzi,
  • Giacomo Marrazzo,
  • Andrea Marsiglia,
  • David Boldrin and ,
  • Riccardo Pietro Castellanza,
  • Jonathan Knappett and
  • Matteo Oryem Ciantia
  • + 2 authors+ 0 author

27 November 2025

Tree stability under wind loading is a critical concern for risk management in urban and natural environments. Despite advances in assessment methods, discrepancies persist between theoretical predictions and real-world tree behaviour. This study pre...

(This article belongs to the Section Forest Operations and Engineering)
  • Article
  • Open Access
11 Citations
4,545 Views
19 Pages

5 April 2023

An experimental test was performed to study the bond behavior between steel rebar and concrete reinforced by polyvinyl alcohol (PVA) fibers. Twenty specimens were prepared and subjected to the pull-out test. Four different fiber volume contents (0%,...

(This article belongs to the Special Issue Advances in the Preparation and Characterization Techniques for Developing Coating Materials and Applications)
  • Article
  • Open Access
11 Citations
5,717 Views
22 Pages

23 February 2021

To analyze the characteristics, influencing factors, and microscopic mechanisms of county-level city shrinkage, this paper uses a quantitative push-pull model to explore the shrinking counties of Shandong Province between 2000 and 2018. The measureme...

  • Article
  • Open Access
6 Citations
4,570 Views
23 Pages

29 June 2019

The paper presents a novel fully integrated MEMS-based non-resonating operated 2D mechanical scanning system using a 1D push-pull actuator. Details of the design, fabrication and tests performed are presented. The current design utilizes an integrate...

(This article belongs to the Special Issue MEMS Technology for Biomedical Imaging Applications)
  • Article
  • Open Access
1,156 Views
16 Pages

25 December 2025

The mechanical performance of rail fasteners plays a crucial role in the track–structure interaction of high-speed railways. A reasonable lateral stiffness of the fastener system can enhance the stability and safety of train operation and preve...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
5 Citations
2,785 Views
17 Pages

20 May 2020

A self-compacting concrete (SCC) mixture, due to its special rheological properties, may be placed differently than in traditional variants. The paper presents the results of a study on the effect of a bottom-up placing direction on the quality of bo...

(This article belongs to the Special Issue Concrete Technology and Mechanical Properties of Concretes)
  • Article
  • Open Access
3 Citations
3,129 Views
13 Pages

26 August 2021

The geodynamic mechanism is the research focus and core issue of plate motions and plate tectonics. Analyzing the time series of earthquakes may help us understand the relationship between two plate boundaries and further explore movement mechanisms....

(This article belongs to the Special Issue Seismic Exploration and Geothermal Energy)
  • Article
  • Open Access
18 Citations
4,819 Views
13 Pages

Fatigue Behaviors of Resistance Spot Welds for 980 MPa Grade TRIP Steel

  • Heewon Cho,
  • Sangwoo Nam,
  • Insung Hwang,
  • Je Hoon Oh and ,
  • Munjin Kang and
  • Young-Min Kim
  • + 1 author+ 0 author

10 October 2019

The fatigue life of the resistance spot weld of 980 MPa grade transformation induced plasticity (TRIP) steel was investigated and failure modes and fracture surfaces according to the fatigue load were analyzed. The fatigue life according to the nugge...

  • Article
  • Open Access
24 Citations
7,541 Views
14 Pages

Research on Tensile Properties of Carbon Fiber Composite Laminates

  • Jiayi Wang,
  • Lifeng Chen,
  • Wei Shen and
  • Lvtao Zhu

8 June 2022

In order to study the thread tensile performance of carbon fiber composite laminates, the connection between the test piece, connecting bolts, bushings, and the composite matrix, was leveraged for loading, and combined with an ultra-sound scanning im...

(This article belongs to the Special Issue Smart Textile and Polymer Materials)
  • Article
  • Open Access
18 Citations
6,605 Views
12 Pages

19 December 2019

This study proposes a new structure for a pressure sensor module that can reduce errors caused by measurement position and direction in noninvasive radial artery pulse wave measurement, which is used for physiological monitoring. We have proposed a s...

(This article belongs to the Collection Medical Applications of Sensor Systems and Devices)
  • Article
  • Open Access
11 Citations
2,118 Views
20 Pages

Combined Effects of Steel and Glass Fibres on the Fracture Performance of Recycled Rubber Concrete

  • Xiaohui Li,
  • Zezhou Pan,
  • Hao Zhen,
  • Wenhua Luo and ,
  • Zhuangwei Chen,
  • Hongming Li,
  • Zhichao Wu,
  • Feng Liu and
  • Lijuan Li
  • + 4 authors+ 0 author

As an environmentally friendly construction material, recycled rubber concrete (RRC) is commonly used as a road material owing to its excellent flexural strength and crack resistance. Previous studies have shown that the addition of fibres is an effe...

(This article belongs to the Special Issue New Concrete Materials: Performance Analysis and Research)
  • Article
  • Open Access
2 Citations
1,510 Views
14 Pages

Adhesively bonded fibre-reinforced polymer (FRP) anchors have emerged as a progressive alternative to traditional steel anchors in concrete structures, owing to their superior corrosion resistance, high tensile strength, and light weight. Despite the...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: Modeling and Simulation of Composite Materials)
  • Article
  • Open Access
1 Citations
1,644 Views
35 Pages

23 June 2025

In the present study, a programme of experimental investigations was carried out to examine the direct uniaxial tensile (and pull-out) behaviour of plain and fibre-reinforced lightweight aggregate concrete. The lightweight aggregates were recycled fr...

  • Article
  • Open Access
15 Citations
4,461 Views
16 Pages

The Determination of Pullout Parameters for Sand with a Geogrid

  • Kyungho Park,
  • Daehyeon Kim,
  • Jongbeom Park and
  • Hyunho Na

31 December 2020

The concept of designing mechanically stabilized earth (MSE) walls is divided into internal and external stability review methods, and one of the design factors required in internal stability analysis is the frictional characteristics between soil an...

  • Article
  • Open Access
3 Citations
1,121 Views
13 Pages

Sex-Based Differences in the Physical Capacity Profile of Regional Fencers

  • Javier Gaviria Chavarro,
  • Óscar Hernán Jiménez Trujillo,
  • Miguel Ángel Gómez García,
  • Rosa Nury Zambrano Bermeo and
  • Catalina Jiménez Cerquera

9 June 2026

Fencing is an intermittent combat sport in which performance depends on the interaction of neuromuscular qualities, aerobic support, and weapon-specific demands. However, evidence on sex-based differences in the physical capacity profiles of regional...

  • Article
  • Open Access
1 Citations
2,677 Views
17 Pages

Investigating the Bond Performance of FRP Bars and Concrete Under Dynamic Loading Conditions

  • Wenhui Bao,
  • Yini Tan,
  • Hao Li,
  • Chenglong Liang and ,
  • Hui Chen and
  • Chuanqing Fu
  • + 1 author+ 0 author

13 June 2025

With growing emphasis on sustainable construction, fiber-reinforced polymer (FRP) bars are increasingly being used as alternatives to steel rebars due to their high strength-to-weight ratio, corrosion resistance, and environmental benefits. This stud...

(This article belongs to the Section Environmental Aspects in Colloid and Interface Science)
  • Article
  • Open Access
10 Citations
3,365 Views
22 Pages

Research on Positioning Control Strategy for a Hydraulic Support Pushing System Based on Iterative Learning

  • Tengyan Hou,
  • Ziming Kou,
  • Juan Wu,
  • Tianyi Jin and ,
  • Kaiyuan Su and
  • Binghua Du
  • + 1 author+ 0 author

26 July 2023

At present, the positioning control of the hydraulic support pushing systems in fully mechanized mining faces uses an electrohydraulic directional valve as the control component, while the current research mainly focuses on servo valves, proportional...

(This article belongs to the Special Issue Innovative and Intelligent Actuation for Heavy-Duty Applications)
  • Article
  • Open Access
10 Citations
2,570 Views
18 Pages

9 August 2023

In order to investigate the effect of fiber end on the bonding mechanical properties between shape memory alloy (SMA) fibers and Engineered Cementitious Composites (ECC), this study designed and fabricated five groups of specimens with variations in...

(This article belongs to the Special Issue Novel Cementitious Materials for Resilient and Sustainable Buildings and Infrastructure)
  • Article
  • Open Access
1,476 Views
9 Pages

Background: Walking a dog on-leash is a common activity for a large portion of our society. Many dogs consistently pull on the leash, which transmits potentially dangerous forces to the human body. The purpose of this in silico study was to determine...

(This article belongs to the Section Injury Biomechanics and Rehabilitation)
  • Article
  • Open Access
9 Citations
3,243 Views
14 Pages

Influence of Polypropylene Fiber on Tensile Property of a Cement-Polymer Based Thin Spray-On Liner

  • Qun Wei,
  • Nong Zhang,
  • Xiaowei Feng,
  • Zhengzheng Xie and ,
  • Jiansheng Wu and
  • Juncai Cao
  • + 1 author+ 0 author

18 July 2019

The influence of a polypropylene fiber on the tensile properties of a cement-polymer based thin spray-on liner (TSL) was investigated in this study. Two different contents of fiber were added to the liner, yielding two TSL groups. Tensile tests were...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
4 Citations
3,423 Views
15 Pages

Comparing Isolated Thumb Force Generation, Wrist Rotation, and Clinical Measurements in Healthy and Osteoarthritic Individuals before and after Surgery

  • Nicole Arnold,
  • Adam Chrzan,
  • Kevin Chan,
  • Daniel Hess and ,
  • Levi Hinkleman,
  • Stephen Duquette,
  • John Kelpin and
  • Tamara Reid Bush
  • + 3 authors+ 0 author

Thumb carpometacarpal (CMC) osteoarthritis (OA) is caused by the degeneration of joint surfaces at the base of the thumb. If conservative treatments have failed, surgery may be needed to improve symptoms. Typically, standard clinical tools, such as t...

(This article belongs to the Section Biomechanics and Sports Medicine)
  • Article
  • Open Access
11 Citations
6,147 Views
21 Pages

A sustainable future is required for precast concrete structures, and the reuse of concrete elements will be an essential part of the solution. Design for disassembly is currently conducted with costly and time-consuming mechanical joints. Now, morta...

(This article belongs to the Section Building Structures)

of 4