Fractional calculus approach is used to analyze the model of surfactant transport by anomalous diffusion and its adsorption on an interface in a liquid-liquid system. The anomalous diffusion is modeled by time-fractional partial differential equation...
The adsorption behaviour of linear poly(oxyethylene) alkyl ether (CnEOm) is best described by a reorientation model. Based on a complete set of experimental data, including the adsorption kinetics, the equilibrium surface tension isotherm and the sur...
The aim of the present study was the development of a “smart bandage” for the topical administration of diclofenac, in the treatment of localized painful and inflammatory conditions, incorporating Molecularly Imprinted Polymers (MIPs) for...
The dynamic and equilibrium properties of adsorption layers of poly (oxyethylene) alkyl ether (CnEOm) can be well described by the reorientation model. In its classical version, it assumes two adsorption states; however, there are obviously surfactan...
Drop profile analysis tensiometry is applied to determine the distribution coefficient of a nonionic surfactant for a water/hexane system. The basic idea is to measure the interfacial tension isotherm in two configurations: a hexane drop immersed in...
In many modern technologies, surface-active compounds, such as surfactants, polymers, proteins, particles and their mixtures, are essential components. They change the dynamic and equilibrium properties of the inherent interfaces, which is mostly vis...
Aquaculture wastewater containing tetracycline hydrochloride (TCH) poses significant environmental problems and health risks. We investigated the adsorption of TCH onto phosphoric acid-activated corncob biochar (PCC) as a sustainable and efficient re...
As kerogen is the main organic component in shale, the adsorption capacity, diffusion and permeability of the gas in kerogen plays an important role in shale gas production. Based on the molecular model of type II kerogen, an organic nanoporous struc...
The following paper offers a modern REE 1.0 computer application designed to model the behavior of REE ions in adsorptive materials and membranes. The current version of the application is based on several models, such as the Lagergren pseudo-first o...
Polymeric microspheres synthesized via Pickering emulsion polymerization offer structural tunability, making them attractive platforms for dye adsorption. This study investigates the adsorption behavior of methylene blue onto two classes of polymeric...
Knowledge of the gas adsorption rate and diffusion characteristics in shale are very important to evaluate the gas transport properties. However, research on methane adsorption rate characteristics and diffusion behavior in shale is not well establis...
An efficient adsorbent, CNTs–PAMAM–Ag, was prepared by grafting fourth-generation aromatic poly(amidoamine) (PAMAM) to carbon nanotubes (CNTs) and successive deposition of Ag nanoparticles. The FT–IR, XRD, TEM and XPS results confir...
The pore structure of coal reservoirs is the main factor influencing the adsorption–diffusion rates of coalbed methane. Mercury intrusion porosimetry (MIP), low-pressure nitrogen adsorption (LP-NA), low-pressure carbon dioxide adsorption (LP-CA), and...
Underground hydrogen storage in depleted gas reservoirs has emerged as a key technology for large-scale hydrogen energy storage. However, the occurrence state of hydrogen is governed by residual methane and reservoir mineral surfaces. This study comb...
In the treatment of industrial polluted sites and the construction of landfill sites, anti-pollution barriers are usually used to prevent the diffusion of pollutants. In this paper, the adsorption characteristics of Zn ions by the rock-bentonite anti...
Phosphoric acid-activated biochar has been proven to be a promising adsorbent for pollutant removal in an aqueous solution. It is urgent to understand how surface adsorption and intra-particle diffusion synergistically contribute to the adsorption ki...
Astilbin (AST), isoastilbin (ISO), and engeletin (ENG) are the main flavonoids in Rhizoma Smilacis Glabrae (RSG) and have many biological activities. In this study, the adsorption kinetics of AST, ISO, and ENG on HPD-300 resin was investigated and th...
This study presents a comparative analysis of the adsorption behavior of three industrial ionic dyes—Indigo Carmine (IC), Congo Red (CR), and Evans Blue (EB)—using two adsorbent materials with distinct physicochemical and textural propert...
In this work, we investigate the effect of the number of available adsorption sites for diffusing particles in a liquid confined between walls where the adsorption (desorption) phenomena occur. We formulate and numerically solve a model for particles...
The degree of salinity in the hydraulic fracturing rejection fluid of the Shaximiao reservoir in the central Sichuan Basin is high, and the underlying mechanism causing this salinity is not clearly understood. We evaluated the rock structure of tight...
In this study, three novel magnetic nanocomposites based on carboxyl-functionalized SBA-15 silica and magnetite nanoparticles were prepared through an effective and simple procedure and applied for methylene blue (MB) and malachite green G (MG) adsor...
China has abundant deep coalbed methane (CBM) resources; however, high temperature, stress, and reservoir pressure complicate the gas adsorption–desorption–diffusion–seepage processes, severely restricting the development of deep CB...
The main objective of this study consists in the synthesis of a layered double hydroxide (LDH) clay doped with magnesium and aluminum in order to test the removal of phosphates and ibuprofen in water. Two different LDH composites are assessed: oven-d...
16 October 2014
Due to the importance of adsorption kinetics and redox transformation of arsenic (As) during the adsorption process, the present study elucidated natural organic matter (NOM) effects on As adsorption-desorption kinetics and speciation transformation....
Kaolinite-rich soils were used to prepare zeolite-based composites via alkaline activation. The porous material was characterized by conducting XRD and microporosity measurements, as well as ESEM microscopy. The Weber and Morris (W-M) model was used...
Abandoned lead and zinc (Pb-Zn) mines around the world produce large amounts of acid mine drainage (AMD) containing Pb(II), which is toxic and accumulates in the environment and in living organisms. Bentonite-steel slag composite particles (BSC) are...
In this study, the removal of vancomycin and rifampicin from aqueous media by three types of granular activated carbon was investigated under a wide range of operational conditions. There is growing concern about antimicrobial resistance to vancomyci...
The granulation of bismuth oxide (BO) by alginate (Alg) and the iodide adsorption efficacy of Alg–BO for different initial iodide concentrations and contact time values were examined. The optimal conditions for Alg–BO granulation were ide...
Whether chloride resistance is highly influenced by chloride binding capacity remains unknown. In this study, the chloride resistance of Portland cement-based mortar incorporating aluminate cement and calcium carbonate was investigated considering th...
In this work, adsorption of rhodamine B (RB) and acid yellow 17 (AY17) was investigated on ordered mesoporous carbon material obtained by soft-templating method with hydrochloric acid (ST-A). For comparison, the adsorption process on commercial activ...
Graphene oxide/poly(amidoamine) (GO/PAMAM) nanocomposite adsorbed high quantities of congo red (CR) anionic dye in 0.1 M NaCl solution, with the maximum adsorption capacity of 198 mg·g−1. The kinetics and thermodynamics of adsorption were investigate...
In this work, the adsorption mechanism of phenol on activated carbon from aqueous solutions was investigated. Batch experiments were performed as a function of adsorbent rate, solution temperature, phenol initial concentration, stirring speed, and pH...
Electrosorption is a new emerging technology for micro-polluted water treatment. To gain a more accurate understanding of the mass and charge transfer process of electrosorption, the electrosorption performance of activated carbon fiber (ACF) electro...
Carbon nanotubes are materials that have been investigated for diverse applications including the adsorption of metals. However, scarce literature has described their behavior in the case of the adsorption of precious metals. Thus, this work reports...
22 February 2019
In this study, aluminosilicate rich clay soils were prepared through mechanochemical activation. The chemical and mineralogical properties were investigated using X-Ray Fluorescence (XRF) and X-ray diffraction (XRD). The functional groups, morphology...
The objective of this research was to investigate the behavior and conditions for CO2 adsorption using a mixture of CO2/N2 over a fixed-bed column of zeolite 5A. The study was performed with a variation in gas composition of CO2/N2 as a 20/80, 50/50,...
In this study, we systematically investigated the adsorption behavior of a titanium-based metal–organic framework (MOF) sensing layer on five primary alcohol homologs using the quartz crystal microbalance (QCM) technique. Unexpectedly, response...
For ideal gasses, the likelihood of collision of two molecules is a function of concentrations as well as environmental factors such as temperature. This too is the case for particles diffusing within liquids. Two such particles are bacteria and thei...
The aim of this work was to investigate the influence of initial pH value (pH0) on the isothermal adsorption of Reactive Black 5 (RB5) dye on commercial powdered activated carbon. Four initial pH values were chosen for this experiment: pH0 = 2.00, 4....
Microengraving is a novel immunoassay for characterizing multiple protein secretions from single cells. During the immunoassay, characteristic diffusion and kinetic time scales and determine the...
The aim of the study was to prepare a novel adsorbent by chemical modification of hazelnut shells and evaluate its potential for the nitrate removal from model solutions and real wastewater. The characterization of the novel adsorbent, i.e., modified...
To address brine discharge pipe blockage caused by salt crystallization in natural gas storage facilities within salt caverns, this study employed GROMACS molecular dynamics simulations to develop a three-dimensional regulatory model integrating inte...
With the advancement of global carbon reduction efforts and the rapid development of battery industries, the scale of spent lithium-ion batteries (LIBs) has increased dramatically. Extracting lithium from spent LIBs to synthesize Li4SiO4 sorbents not...
The subject of CO2 subsurface storage security has never been more critical, and there is a need to explore the injection of functional materials that are capable of providing both conformance control and in situ CO2 adsorption, thereby improving ove...
Gas prevention and control have always been the focus of coal mine safety. The pore structure characteristics and gas adsorption characteristics of coal seams are the key factors affecting gas adsorption and diffusion in coal seams. Lvjiatuo Mine has...
Seaweed biochar is an efficient alternative bioadsorbent for Cu2+ removal due to its low cost and heavy metal removal capacity. Using the slow pyrolysis process, we produced biochars from Macrocystis pyrifera at 300 (BC300), 450 (BC450), and 600 °C (...
Coalbed methane (CBM) is of great economic value. However, at the same time, CBM is facing a multitude of technological challenges. The water blocking effect (WBE) is one of the physical effects that controls the production of CBM. To alleviation WBE...
This study aimed to assess the role of polymeric sources (polypyrrole, polyaniline, and their copolymer) of nitrogen (N)-doped activated carbons (indexed as PAnAC, PPyAC, and PnyAC, respectively) on their adsorption efficiency to remove methyl orange...
We studied the dynamics of adsorption at the air-water interface of a cationic surfactant bearing two charges, Gemini 12-2-12, at concentrations below and above the critical micelle concentration (cmc). We used maximum bubble pressure and Wilhelmy pl...
Emulsion liquid membranes have been successfully used for the removal of different types of organic and inorganic pollutants by means of carrier-mediated transport mechanisms. However, the models that describe the kinetics and transport of such mecha...
of 8