- Article
It is widely accepted to examine and explain the functioning of the standard “Current Doubler Rectifier” as strictly symmetrical according to the electrical current through the two inductances. The present work challenges this considerati...
It is widely accepted to examine and explain the functioning of the standard “Current Doubler Rectifier” as strictly symmetrical according to the electrical current through the two inductances. The present work challenges this considerati...
In this paper, a power supply system for hybrid renewable energy conversion is proposed, which can process PV (photovoltaic) power and wind-turbine energy simultaneously for step-down voltage and high current applications. It is a dual-input converte...
A novel circuit topology for an on-board battery charger for plugged-in electric vehicles (PEVs) is presented in this paper. The proposed on-board battery charger is composed of three H-bridges on the primary side, a high-frequency transformer (HFT),...
In this paper, the proposal for the performance optimization of the wireless power transfer (WPT) system is given. The solution is based on the alternative configuration of the secondary-side rectifier. It is represented by a diode rectifier with a c...
In the context of the auxiliary power for motor-driven vehicles having two systems, we propose a new topology for a dual-output isolated DC/DC converter, which offers advantages in terms of efficiency and size. The proposed circuit consists of an H-b...
In this study, a frequency doubler that consists of a tunnel field-effect transistor (TFET) with dual pocket doping is proposed, and its operation is verified using technology computer-aided design (TCAD) simulations. The frequency-doubling operation...
An improved high step-down DC-DC converter for charging the batteries in an electric vehicle application is proposed in this paper. It adopts the topology of the conventional full-bridge converter, which has a coupled inductor current-doubler rectifi...
A dc-dc converter with asymmetric pulse-width modulation is presented for medium voltage applications, such as three-phase ac-dc converters, dc microgrid systems, or dc traction systems. To overcome high voltage stress on primary side and high curren...
Forward converters have been broadly used in the power supply industry due to their simplicity, worthy efficiency, and low cost. A novel prototype soft-switched zero-voltage and zero-current ZVZC PWM DC-DC power converter with low voltage/current str...
DC-DC isolated converters allowing a bidirectional flow of energy between High-Voltage DC and Low-Voltage DC networks have been proposed to be integrated in future on board power distribution systems. These converters must meet the specially stringen...
This paper presents a novel passive Schottky-diode frequency doubler equipped with an on-off keying (OOK) modulation port to be used in harmonic transponders for both identification and sensing applications. The amplitude modulation of the second-har...
This paper presents a tightly regulated multi-output isolated converter that employs only an independently regulated synchronous Single-Switched Post-Regulator (SSPR). The proposed converter is a highly accurate single-ended secondary side post-regul...
This work presents the first design of an active frequency quadrupler based on GaN HEMTs. It is based on two cascaded frequency doubler stages that allow up-conversion from the S band to the X band, obtaining conversion gain in narrowband without the...
This paper presents a theoretical analysis of steady-state operation, control-oriented modeling for voltage control, and the experimental results of a DC–DC bidirectional converter based on a Cuk converter using a voltage-doubler concept. Due t...
A battery charger for solid-state lithium battery packs was developed and implemented. The power stage used a phase-shifted full-bridge converter integrated with a current-doubler rectifier and synchronous rectification. Dual voltage and current cont...
Dual-mode sensors are currently facing difficulties in achieving independent sensing of parameters as well as low sensitivity. In this paper, we propose a dual-mode sensor using the finite element method (FEM) based on a coupled silver–PDMS&nda...
This paper introduces a new four-switch, high-voltage, high-step-up converter employing two transformers. The topology enables Zero-Voltage Switching (ZVS) across all primary switches for operating conditions ranging from no load to full load. A volt...
A comprehensive model for micro-powered piezoelectric generator (PG), analysis of operation, and control of voltage doubler joule thief (VDJT) circuit to find the piezoelectric devices (PD’s) optimum functioning points are discussed in the present ar...
This paper presents a CMOS-based optoelectronic receiver integrated circuit (CORIC) realized in a standard 180 nm CMOS technology for the applications of short-distance optical interconnects. The CORIC comprises a spatially modulated P+/N-well on-chi...
This paper studies a frequency-controlled current-fed resonant circuit. The adopted direct current (DC)-to-DC converter contains two boost circuits and a resonant circuit on the primary side. First, two boost circuits are connected in parallel to ach...
This paper presents an interleaved inductor-coupled converter for a fuel cell. It is designed to boost a low input voltage from a fuel cell to a specified voltage level for DC load or high voltage DC link, thus providing a high-voltage conversion rat...
This paper presents the methodology and challenges experienced in the microfabrication, packaging, and integration of a fixed-fixed folded spring piezoelectric energy harvester. A variety of challenges were overcome in the fabrication of the energy h...
The present work proposes a 180–225 GHz broadband frequency doubler monolithic microwave integrated circuit (MMIC) based on a novel Schottky barrier diode (SBD) terminal structure denoted as a Schottky metal-brim (SMB). Compared with an MMIC ad...
In recent years, micro-annular beams have been widely used, which has expanded the possibilities for laser processing. However, the current method of generating an annular beam still has shortcomings, such as spot energy at the center of the produced...
This paper studies and implements a power converter to have less current ripple output and wide voltage input operation. A three-leg converter with different primary turns is presented on its high-voltage side to extend the input voltage range. The c...
A full-bridge DC–DC converter with structure exchange is proposed to simulate battery charging based on an electronic load. The full-bridge phase-shift converter (FBPSC) uses an external resonant inductor and phase-shift control on the primary...
This paper investigates a dual-active-bridge (DAB) converter topology based on a voltage-doubler rectifier and series resonant network. By integrating phasor-domain analysis with time-domain modeling, a comprehensive mathematical model of the output...
In this paper, a direct current (dc) converter with the abilities of bidirectional power transfer and soft switching characteristics is studied and implemented. The circuit schematic of the developed dc converter is built by a half-bridge converter a...
We demonstrate that the evolution of superflows in interacting persistent currents of ultracold gases is strongly affected by symmetry breaking of the quantum vortex dynamics. We study counter-propagating superflows in a system of two parallel rings...
This manuscript presents the numerical optimization (through a mathematical model and an evolutionary algorithm) of the voltage-doubler boost converter, also called the series-capacitor boost converter. The circuit is driven by two transistors, each...
A filtering slot antenna with a simple structure combination using characteristic mode analysis (CMA) is proposed. To realize filtering characteristics, characteristic magnetic currents of line and ring slots are analyzed and designed. Then, the fold...
This letter presents an inductorless transimpedance amplifier (TIA) for visible light communication, using the UMC 40 nm CMOS process. It consists of a single-to-differential input stage with a modified cross-coupled regulated cascode design, followe...
The main objective of this paper was to study a bidirectional direct current to direct current converter (BDC) topology with a high voltage conversion ratio for electric vehicle (EV) batteries connected to a dc-microgrid system. In this study, an unr...
A new battery charger, based on a multiphase resonant converter, for a high-capacity 48 V LiFePO4 lithium-ion battery is presented. LiFePO4 batteries are among the most widely used today and offer high energy efficiency, high safety performance, very...
The ambipolar conduction property of graphene field-effect transistors (GFETs) and the inherent square-like dependence of the drain current on the gate voltage, enable the development of single-device architectures for analog nonlinear radiofrequency...
This paper presents a resonant converter with the benefits of wide output voltage, wide soft switching characteristics for power devices and high circuit efficiency. Since the series resonant circuit is adopted on the primary side, the power switches...
This paper presents a concept for the operation of a resonant DC–DC switched-capacitor converter with very high efficiency and output voltage regulation. In its basic concept, such a converter operates as a switched-capacitor voltage doubler (S...
The LLC resonant converter is widely recognized as an effective solution for achieving high efficiency in high-frequency operations. This is primarily due to its ability to perform zero-voltage switching (ZVS) on primary switches and zero-current swi...
Energy transformation by power electronic converters is not feasible without the efficient use of renewable energy. The article tries to extend the use of renewable energy to PHEV battery charging. In PHEV, the battery is one of the major sources of...
In the current research, the delamination behavior under Mode I and Mode II loading for the hybrid carbon-thermoplastic fabrics in conjunction with novel liquid thermoplastic acrylic Elium® resin processable at ambient conditions was studied. The...
A novel varactor circuit exhibiting a wider tuning range and a new technique for quadrature coupling of LC-Voltage Controlled Oscillator (LC-VCO) is presented and validated on a 25 GHz oscillator. The proposed varactor circuit employs distribute-bias...
In this work, a non-isolated DC–DC converter is presented that combines a voltage doubler circuit and switch inductor cell with the single ended primary inductor converter to achieve a high voltage gain at a low duty cycle and with reduced comp...
Because traditional electronics cannot directly use the alternating output voltage and current provided by electric field energy harvesters, harvesting systems require additional regulating and conditioning circuits. In this field, this work presents...
Molecular chaperones are highly conserved across evolution and play a crucial role in preserving protein homeostasis. The 60 kDa heat shock protein (HSP60), also referred to as chaperonin 60 (Cpn60), resides within mitochondria and is involved in mai...
The advancement of Internet of Things (IoT) technology has enabled battery-powered devices to be deployed across a wide range of applications; however, it also introduces challenges such as high energy consumption and security vulnerabilities. To add...
In the realm of electric vehicles (EVs), achieving diverse direct current (DC) voltage levels is essential to meet varying electrical load demands. This requires meticulous control of the battery voltage, which must be adjusted in line with specific...
In the field of orthopedic surgery, particularly distraction osteogenesis (DO), the mechanical environment plays a decisive role in the quality of bone regeneration and the safety of the soft tissue envelope. The continuous monitoring and accurate pr...
Low-power energy harvesting has been demonstrated as a feasible alternative for the power supply of next-generation smart sensors and IoT end devices. In many cases, the output of kinetic energy harvesters is an alternating current (AC) requiring rec...
The maintenance of a soil’s infiltration rate (IR) and field-saturated hydraulic conductivity (Kfs) is crucial for the long-term sustainable functioning of wastewater-irrigated lands. However, an effective procedure for reliably measuring in si...
This paper presents a multifunctional battery-free wireless sensing node (SN) designed to monitor physical parameters (e.g., temperature, humidity and resistivity) of reinforced concrete. The SN, which is intended to be embedded into a concrete cavit...