- Feature Paper
- Article
We discuss Markov edge processes
We discuss Markov edge processes
The reconstruction of a broken contour line is a prerequisite for the automated processing of contour lines. When the situation with broken contour lines is severe or the terrain is more complex, incorrect and missing connections are most likely to o...
Saline-alkali soil has the characteristics of high density, high firmness and poor permeability. Aiming at the problems of shallow subsoiling depth, large subsoiling specific resistance and small soil bulkiness in subsoiling operation in saline-alkal...
During the long-term service condition, the mooring line of the deep-water floating platform may fail due to various reasons, such as overloading caused by an accidental condition or performance deterioration. Therefore, the safety performance under...
30 September 2022
Objective: This study used narrative interviewing and grounded theory analysis to discover the phases of trauma integration for Japanese women who had experienced intimate partner violence (IPV). Method: We interviewed 23 Japanese women who had exper...
This study evaluated the feed digestibility of diets including autotrophic Chlorella (C.) vulgaris in 252 male broilers (Ross 308), comparing unprocessed biomass (trial 1) and pulsed electric field (PEF) processed biomass (trial 2) at inclusion level...
Induction motors (IM) are key components of any industrial process; hence, it is important to carry out continuous monitoring to detect incipient faults in them in order to avoid interruptions on production lines. Broken rotor bars (BRBs), which are...
Tomographic synthetic aperture radar (TomoSAR) produces 3-D point clouds with unavoidable noise or false targets that seriously deteriorate the quality of 3-D images and the building reconstruction over urban areas. In this paper, a Hough transform w...
The physical condition of insulators on electrical transmission lines is critical for system reliability. Early fault detection such as broken discs or flashovers prevents outages and accidents. Traditional inspection methods are costly and difficult...
Power lines are critical infrastructure components in power grid systems. Strand breakage is a kind of serious defect of power lines that can directly impact the reliability and safety of power supply. Due to the slender morphology of power lines and...
A batch mixer is an important piece of equipment for polymer filling modification, and the kinematics of agglomerate breakup and distribution are necessary for the structure design and mixing process optimization of the rotor, particularly in light o...
To address the inefficient crushing of fertilizer during the mechanized spreading process caused by the caking of high-humidity organic fertilizer, a fertilizer spreader with a combined rotor and lining plate crushing mechanism was proposed in this p...
In the field of mineral processing, the successful flotation of target minerals requires sufficient liberation through grinding. The aim of this paper is to compare and evaluate the performance of ball versus short cylindrical media for comminution o...
This paper proposes a reinforcement learning (RL) based path following strategy for underactuated airships with magnitude and rate saturation. The Markov decision process (MDP) model for the control problem is established. Then an error bounded line-...
After harvesting and drying, areca nut (betel nut) processing requires shell cracking and separation of the kernel from the shell. Conventional processing often relies on manual sorting or additional separation machines after husking. To address this...
The current manual inspection of transmission line images captured by unmanned aerial vehicles (UAVs) is not only time-consuming and labor-intensive but also prone to high rates of false detections and missed inspections. With the development of arti...
The development of high resolution SAR makes the influence of moving target more prominent, which results in defocusing and other unexplained phenomena. This paper focuses on the research of imaging signatures and velocity estimation of turning motio...
Today’s manufacturing industries require a continuous process free of unexpected downtime on their production lines. In light of this, this study proposes an innovative method for the early diagnosis of faults in three-phase induction motors th...
This paper presents a novel optoelectronic detection array that adopts the research idea of optical, mechanical and electrical integration. Through the design of new detectors and ASIC, the mutual restriction between high accuracy and miniaturization...
Tunnel excavation induces the stress redistribution of surrounding rock. In this excavation process, the elastic strain in the rock is quickly released. When the maximum stress on the tunnel lining exceeds the concrete’s load-bearing capacity,...
Different batches of biomass/feed quality maize contaminated by aflatoxins were processed at the industrial scale (a continuous process and separate discontinuous steps) to evaluate the effect of different cleaning solutions on toxin reduction. The i...
Crop row identification and navigation line extraction are essential components for enabling autonomous operations of agricultural machinery. Aiming at the soybean–maize strip intercropping system, this study proposes a LiDAR-based algorithm fo...
Four typical double-moment cloud microphysical schemes (Milbrandt, Morrison, NSSL and WDM6) in WRF (Weather Research and Forecasting) are used to investigate the impact of the different schemes on the simulation of a straight squall line evolving int...
Microwave imaging has been recently proposed as alternative technology for in-line inspection of packaged products in the food industry, thanks to its non-invasiveness and the low-cost of the equipment. In this framework, simple and effective detecti...
Currently, bio-inspired metaheuristic algorithms play an important role in computer vision for assessing surface cracks. Also, manufacturing industries need non-destructive technologies based on biomimetics theory for characterizing micro-crack conto...
With the continuous development of the social economy, the depth of foundation pit excavation of proposed construction projects in various places gradually increases, which is closer to the building red line, and the surrounding environment is relati...
Abundant industrial experiences have shown that directional air drilling technology is effective for gas drainage when drilling broken and soft coal seams. In this paper, the Eulerian–Eulerian model was used to simulate the gas–solid two-...
Cloud Atlas (2004) presents a process of religious genesis. This genesis is set against the backdrop of the retreat of stable institutions and recoverable origins, gradually taking shape at the far end of a broken transmission chain. Existing cr...
Reinforced concrete poles are very popular in transmission lines due to their economic efficiency. However, these poles have structural safety issues in their service terms that are caused by cracks, corrosion, deterioration, and short-circuiting of...
In order to enable accurate and efficient rice quality evaluation through full-surface defect detection of brown rice, a detection system based on convolutional neural network (CNN) was developed. A dataset of images of five categories—unhulled...
Open-ended pipe piles have been increasingly used as the foundations for offshore structures. Considering the soil plugging effect, a novel analytical model is proposed in this paper to study the load transfer mechanism of open-ended pipe piles. A tr...
Single Al wires from unused AAAC (A50) cables were studied after laboratory fatigue testing, which simulated processes arising in these wires during their operation in the cables of overhead power lines (OPLs) and are valuable for predicting the life...
Straightening is an important process in the production and application of shafts, tubes, and various profiles. According to the springback theory of small curvature plane bending, the pure bending process and springback of in-plane curved beam with...
A structure does not reach a stable state during the construction process, and hence its structural reliability is low. In order to ensure the safety of the construction process and final structural quality, it is necessary to analyze the safety and...
In order to study the strength change of concrete specimens under different loading conditions, based on the principle of minimum energy dissipation, the damage energy per unit area of concrete was studied. By using finite element numerical simulatio...
Infrared-photoacoustic spectroscopy (IR-PAS) and partial least squares (PLS) were tested as a rapid alternative to conventional methods to evaluate the proportion of coffee defects in roasted and ground coffees. Multiproduct multivariate calibration...
To study the ablation properties and differences of plain-woven SiC/SiC composites under single and cyclic ablation. The ablation test of plain-woven SiC/SiC composites was conducted under an oxyacetylene torch. The results indicate that the mass abl...
Due to their high speed and versatility, laser processing systems are now commonplace in many industrial production lines. However, as the need to reduce the environmental impact from the manufacturing industry becomes more urgent, there is the oppor...
Coal gangue slurry filling is an important technical means for harmless and large-scale disposal of gangue under low-interference conditions, and is one of the most important ways to achieve green mining, which is in line with the national concept of...
Methane production by fermentation is a complex biochemical process, in which micromolecular organic substances are broken down by anaerobic bacteria into simple stabilized chemicals—mainly methane CH4 and carbon dioxide CO2. The organic matter of th...
Sulfur is an essential element for plant growth, development and resistance to environmental stresses. Glucosinolates (GSLs), a group of sulfur rich secondary metabolites found in Brassicaceae plants, are known for their defensive properties against...
In recent years, polymer gears have gradually become more widely employed in medium or heavy-duty conditions based on weight reduction in transmission systems because of low costs and low noise compared to metal gears. In the current industry, propos...
Grain cleaning is the most effective non-destructive post-harvest mitigation strategy to reduce high levels of mycotoxins on account of the removal of mold-infected grains and grain fractions with high mycotoxin content. In this study, the reduction...
Precise evaluation for flexural ultimate capacity of bridges which are subjected to the collision of over-height trucks is essential for making decisions on corresponding maintenance, strengthening or replacement. When the span of a cross-line contin...
The proper monitoring of soil moisture content is important to understand water-related processes in peatland ecosystems. Time domain reflectometry (TDR) is a popular method used for soil moisture content measurements, the applicability of which is s...
Coal gangue, as a solid waste produced in the coal mining process, can be disposed by being prepared into backfill materials and then filled in underground goafs, thus controlling strata movement and surface subsidence. However, gangue backfill mater...
Due to its adaptability in being relevant to the economies of different countries, industries, and research fields, the creative economy (CE), a driving force behind the national economy for sustainable development, has recently garnered the attentio...
Advanced geological prediction of tunnels has become an indispensable task to ensure the safety and effectiveness of tunnel construction before excavation in karst areas. Geological disasters caused by unfavorable geological conditions, such as karst...
Sexualized substance use or ‘chemsex’ is a key element in the syndemic of violence and infection in gay, bisexual, and other men who have sex with men. Chemsex is more prolific amongst men who have sex with men but is also associated with high risk b...
When shield tunneling is carried out in poor geological areas with high water head and low strength, there is a great construction risk, and the external water pressure is one of the key factors affecting the stability and safety of the tunnel during...
of 2