Owing to their high design freedom and excellent performance, lattice structures have shown outstanding capabilities and great potential in aeronautics and astronautics fields. In this paper, we propose a method to construct lattice structures by par...
Non-destructive testing (NDT) of aerospace structures has gained significant interest, given its non-destructive and economic inspection nature enabling future sustainable aerospace maintenance repair operations (MROs). NDT has been applied to many d...
The 1st International Online Conference on Aerospace (IOCAE 2026) was held virtually on 16–17 April 2026, providing an international forum for researchers and aerospace professionals to present and discuss recent advances across aeronautics and...
In the aerospace industry, spacecraft often serve in harsh operating environments, so the design of ultra-lightweight and high-performance structures is a major requirement in aerospace structure design. In this article, a lightweight aerospace brack...
Polyetheretherketone (PEEK) has been the focus of substantial additive manufacturing research for two principal reasons: (a) the mechanical performance approaches that of aluminum at relatively high temperatures for thermoplastics and (b) the potenti...
Many companies try to follow Toyota’s production model to achieve better performance. In their attempts, however, they primarily focus on Lean Production tools, often overlooking the role of employees and HRM practices. In this work, we aim to...
In the aerospace industry, thin-layer composites are increasingly used for load-bearing structures. When designing such composite structures, particular attention must be paid to the development of an appropriate geometric form of the structure to in...
Polycarbonate is a thermoplastic material well known for its high impact resistance and thermal stability, making it a strong candidate for non-structural aerospace applications. Within the framework of the LIDER project for the techno brick BUS, the...
Auxetic lattice structures are three-dimensionally designed intricately repeating units with multifunctionality in three-dimensional space, especially with the emergence of additive manufacturing (AM) technologies. In aerospace applications, these st...
New concepts of lightweight components are conceived nowadays thanks to the advances in the manufacture of composite structures. For instance, mature technologies such as Automatic Fibre Placement (AFP) are employed in the fabrication of structural p...
Facing the demands of Human–Robot Collaborative (HRC) assembly for complex products under Industry 5.0, this paper proposes an intelligent assembly method that integrates Large Language Model (LLM) reasoning with Augmented Reality (AR) interact...
To certain degree, multi-objective optimization problems obey the law of symmetry, for instance, the minimum of one objective function corresponds to the maximum of another objective. To provide effective support for the multi-objective operation of...
Honeycomb structures made of carbon-fiber-reinforced plastic (CFRP) are increasingly used in the aerospace field due to their excellent energy absorption capability. Attention has been paid to CFRP structures in order to accurately simulate their pro...
There is an urgency to produce novel high-performance resins to support the rapid development of the aerospace field and the electronic industry. In the present work, we designed and consequently synthesized a benzoxazine monomer (oHPNI-fa) bearing b...
The aerospace industry is increasingly turning to composite materials due to their exceptional strength, stiffness, and beneficial physical properties. However, increased reliance on carbon fibre composites has substantial environmental implications,...
Aerospace die forgings are safety-critical structural products whose service performance is governed by coupled microstructural evolution across multiple length scales rather than by any single descriptor. This review critically synthesizes recent pr...
In order to support the development of high–precision spacecraft, the current state of the Stewart vibration isolation platform in the field of aerospace micro–vibration was surveyed. First, based on analyses of the causes and characteris...
The increasing demands on global resources due to technological development driven by consumer expectations and demands have resulted in significant problems with ecological sustainability and material availability. The creation of biocomposites has...
This paper provides a systematic synthesis of recent developments in physics-informed neural networks (PINNs) applied to aerospace engineering, with an emphasis on their role in physically consistent surrogate modeling, forward simulation, and invers...
Electronic devices play an extremely important role in the aerospace field. Aluminum nitride (AlN) is a promising ceramic material for high-reliability electronic packaging structures that are subjected to impact loads during service. Quasi-static an...
Heterostructure (HS) refers to a class of structural materials composed of two or more different chemical components or crystal structures. Integration of Inconel 625 (IN625) nickel-based superalloy and Ti6Al4V (TC4) titanium alloy to a HS material o...
The existing literature investigates organizational capabilities for servitization in exploratory studies based predominantly on interviews with managers. This has led to classification frameworks that tend to reflect managerial perceptions regarding...
An important step towards improving performance while reducing weight and maintenance needs is the integration of composite materials into mechanical and aerospace engineering. This subject explores the many aspects of composite application, from bas...
This study focuses on Metal Additive Manufacturing (AM), an emerging method known for its ability to create lightweight components and intricate designs. However, Laser Powder Bed Fusion (LPBF), a prominent AM technique, faces a major challenge due t...
Metal alloy matrix composites are generally lightweight structural materials with a high strength-to-weight ratio. They can be extensively used in various fields of modern engineering applications, such as aerospace and automotive components and biom...
The frame of a quadcopter drone is the most important component, as it supports all other systems and plays a vital structural role, supporting the stresses that appear during flight. The objective was to reduce the weight of the frame (18% reduction...
Ti–6Al–4V (TC4) dual-phase titanium alloy is widely used in aerospace components owing to its excellent strength-to-weight ratio and high-temperature stability. However, conventional machining often generates a wide heat-affected zone (HA...
Drilling is fundamental to the assembly of aerospace structures, where millions of fastening holes must meet stringent structural and geometric requirements. Despite significant technological advances, hole quality remains sensitive to nonlinear and...
Powder bed fusion—laser beam (PBF-LB), a prevalent and rapidly advancing additive manufacturing (AM) technology nowadays, serves the industry by producing thin, complex, and lightweight components for various sectors, including healthcare, auto...
Focusing on the practical application requirements of adhesive-bonded structures in aerospace engineering, this study aims to investigate the mechanical performance and failure mechanisms of adhesive interfaces. Adhesive bonding, valued for its unifo...
To address the challenges of dense structural layouts, limited path feasibility, and stringent assembly constraints in cable routing within complex compartments of aerospace equipment, this paper proposes a cable path planning method that integrates...
Ti-Cr-V-based alloys have been utilized across various domains, including aerospace structural and functional materials and hydrogen storage materials. Investigating the phase relations in the Ti-Cr-V system is significant in supporting the material...
Laser wire additive manufacturing (LWAM) offers high deposition efficiency and excellent material utilization. However, manufacturing thin-walled structures with large inclination angles and no support remains a challenge. In this study, the influenc...
We report on numerical modelling of three-dimensional lattice structures designed to provide phononic bandgaps. The examined lattice structures rely on two distinct mechanisms for bandgap formation: the destructive interference of elastic waves and i...
In the aerospace field, lightweight design is a never-ending pursuit. By integrating structural bionics and structural optimization, the vertical bracket of a wide angle auroral imager is designed and manufactured by additive manufacturing technology...
Lightweight composite structures like fiber metal laminates (FMLs) are widely used to manufacture aircraft structures and substitute metallic parts. While the superior mechanical performance of FMLs, including their high specific strength and excelle...
Measurement of dynamic responses plays an important role in structural health monitoring, damage detection and other fields of research. However, in aerospace engineering, the physical sensors are limited in the operational conditions of spacecraft,...
This research establishes critical process–property relationships for the Fused Deposition Modeling (FDM) of rigid (PLA) and functional flexible (TPU) polymers. By systematically evaluating the influence of key manufacturing parameters—in...
Cylinder–plate combined structures (CPCS) are widely used in aerospace, marine engineering, and offshore platform systems. During service, they are frequently subjected to stochastic excitations induced by turbulent boundary layers, acoustic lo...
The three-dimensional (3D) printing of a SiO2-filled thermosetting polyimide (SiO2@TSPI) composite with outstanding performance is realized via the direct ink writing (DIW) of polyamide acid (PAA) composite ink and thermal treatment conducted thereaf...
This paper was concerned with the current level of progress towards the development of chipless radio frequency identification (RFID) sensors that are capable of sensing strain and temperature. More specifically, it was interested in the possibility...
Vacuum gauges based on Micro-Electro-Mechanical System (MEMS) technology have the advantages of small size, high reliability, and low cost, so they are widely used in semiconductor, chemical, laboratory, and aerospace. In this paper, a high-reliabili...
This paper investigates Ring Beam Modulation-assisted Laser (RBML) welding as a novel approach for joining dissimilar materials, specifically aluminum and copper, which are essential in high-performance applications such as electric vehicle batteries...
This paper explores and discusses how wing structures vibrate by using the Mindlin–Reissner plate theory, which takes into consideration the effects of transverse shear deformation and rotary inertia. This theory works well for thicker structur...
The AS/EN9100 standard represents the primary quality management framework governing aerospace supply chains. However, its implementation remains challenging for small and medium-sized enterprises (SMEs) due to limited resources, fragmented processes...
Catapult systems enable Unmanned Aerial Vehicles (UAVs) to take off without runways and must therefore meet key requirements such as safety, reliability, portability, efficiency, and durability. These systems contain mechanically complex components t...
Additive manufacturing of continuous carbon fibre-reinforced polymer (CCFRP) parts enables the production of high-strength parts for aerospace, engineering and other industries. Continuous fibres allow for parts to be reinforced along the load path,...
Aerospace structural components are in a complex stress state when they undertake load due to their specific geometric construction. Their fatigue behavior is quite different from the materials that undertake the standard stress state. The research o...
This study investigates laser transmission welding of 30% glass fiber-reinforced polybutylene terephthalate (PBT-GF30). Injection-molded plates were used as base material, from which specimens were prepared, welded, and experimentally tested. The inf...
Titanium alloys have been extensively employed in the aerospace industry, and their service performance is largely governed by high-temperature low-cycle fatigue damage. However, investigations into the fatigue behavior of TC25 titanium alloy subject...
of 5