Skip to Content

512 Results Found

  • Article
  • Open Access
126 Views
17 Pages

MoS2/Graphene Heterostructures as Gas Sensors for CO, CO2, NO and HF

  • Abderrahim Bayou,
  • Ahmed Kotbi,
  • El Mehdi Nouizi,
  • Bouchra Asbani and ,
  • Abdelkrim Batan,
  • Maryam AlQaydi,
  • Ahmed Al-Shami,
  • Bouchaib Hartiti and
  • Mustapha Jouiad
  • + 4 authors+ 0 author

The strategic integration of the tunable band gap and high carrier mobility of MoS2 with the exceptional electrical conductivity of graphene offers a compelling route to circumvent the intrinsic sensing limitations of each material in isolation. With...

(This article belongs to the Topic Functional Materials for Chemical Sensing and Environmental Sustainability: Trends, Concepts and Applications)
  • Review
  • Open Access
191 Views
26 Pages

26 October 2026

Selected van der Waals magnets retain magnetic order down to the monolayer limit. Their sensitivity to layer number, local bonding, carrier density, and interfaces provides routes to magnetic control for spintronic and quantum devices. In this review...

(This article belongs to the Special Issue 2D Magnetic Materials: From Fundamentals to Applications)
  • Article
  • Open Access
189 Views
25 Pages

Quasi-Static and Blast Performance of Asymmetrical Laminated Glass Systems

  • Hesham Elemam,
  • Ahmed Elbelbisi,
  • Alaa Elsisi,
  • Ahmed Elkilani and ,
  • Andrew Bowman and
  • Hani Salim
  • + 1 author+ 0 author

30 October 2026

Despite the widespread use of laminated glass (LG) in protective glazing systems, the behavior of asymmetrical LG configurations under static and blast loading remains insufficiently understood. This study presents an experimental and numerical inves...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
1 Citations
693 Views
16 Pages

10 June 2026

Upcycling biomass waste into value-added battery materials is crucial for sustainable energy storage. Here, we transform coffee grounds into high-performance hard carbon (HC) anodes for sodium-ion batteries (SIBs) via a synergistic pre-oxidation and...

(This article belongs to the Special Issue Sodium-Ion Batteries: From Electrodes, Electrolytes to High-Performance Devices)
  • Review
  • Open Access
118 Citations
12,214 Views
27 Pages

Application Progress of Polyaniline, Polypyrrole and Polythiophene in Lithium-Sulfur Batteries

  • Xiaodong Hong,
  • Yue Liu,
  • Yang Li,
  • Xu Wang and ,
  • Jiawei Fu and
  • Xuelei Wang
  • + 1 author+ 0 author

5 February 2020

With the urgent requirement for high-performance rechargeable Li-S batteries, besides various carbon materials and metal compounds, lots of conducting polymers have been developed and used as components in Li-S batteries. In this review, the synthesi...

(This article belongs to the Special Issue Polymers for Energy Storage and Conversion)
  • Article
  • Open Access
14 Citations
4,729 Views
8 Pages

Polyaniline (PANI) is synthesized in the presence of montmorillonite (Mt). Mt has small spaces between its layers. This interlayer spacing functions as a reaction field for the production of PANI with an organized structure. Mt/PANI composites thus s...

  • Proceeding Paper
  • Open Access
Eng. Proc.2026, 166(1), 4;https://doi.org/10.3390/engproc2026166004 
(registering DOI)

16 November 2026

Liquid-phase exfoliation is used as a scaled-up method for graphene synthesis; centrifugal separation is used as a thickness sorting process. RPM induces changes in interlayer coherence, defect density, morphology, and surface chemistry, as revealed...

(This article belongs to the Proceedings of The 7th Conference on Emerging Materials and Processes)
  • Article
  • Open Access
35 Citations
5,271 Views
15 Pages

Advancements in Functionally Graded Polyether Ether Ketone Components: Design, Manufacturing, and Characterisation Using a Modified 3D Printer

  • Eric McNiffe,
  • Tobias Ritter,
  • Tom Higgins,
  • Omid Sam-Daliri and ,
  • Tomas Flanagan,
  • Michael Walls,
  • Pouyan Ghabezi,
  • William Finnegan,
  • Sinéad Mitchell and
  • Noel M. Harrison
  • + 5 authors+ 0 author

10 July 2023

Functionally Graded Materials represent the next generation of engineering design for metal and plastic components. In this research, a specifically modified and optimised 3D printer was used to manufacture functionally graded polyether ether ketone...

(This article belongs to the Special Issue 3D Printing of Polymer-Based Composite Materials)
  • Article
  • Open Access
22 Citations
4,170 Views
12 Pages

Surface-Termination Groups’ Tuning to Improve the Lithium-Ion-Storage Performance of Ti3C2Tx MXene

  • Andong Li,
  • Xiaotong Wang,
  • Jingjing Chen,
  • Chenlong Dong and ,
  • Dajian Wang and
  • Zhiyong Mao
  • + 1 author+ 0 author

17 July 2022

Two-dimensional transition metal carbides/carbonitrides (MXenes) have broad application prospects in the field of energy storage due to their abundant surface functional groups, tunable interlayer spacing, and excellent electrical conductivity. Howev...

(This article belongs to the Special Issue Feature Papers of Coatings for Energy Applications)
  • Article
  • Open Access
84 Citations
8,629 Views
11 Pages

12 February 2018

Poly-ether-ether-ketone (PEEK) fabricated by fused deposition modeling for medical applications was evaluated in terms of mechanical strength and in vitro cytotoxicity in this study. Orthogonal experiments were firstly designed to investigate the sig...

  • Article
  • Open Access
16 Citations
6,217 Views
12 Pages

Spin-Filter Magnetic Tunnel Junctions Based on A-Type Antiferromagnetic CrSBr with Giant Tunnel Magnetoresistance

  • Hao Liu,
  • Yue-Yang Liu,
  • Hongyu Wen,
  • Haibin Wu and ,
  • Yixin Zong,
  • Jianbai Xia and
  • Zhongming Wei
  • + 2 authors+ 0 author

CrSBr is a stable two-dimensional (2D) van der Waals (vdW) magnet with intralayer ferromagnetic and interlayer antiferromagnetic couplings. Here, we propose to use CrSBr as the barrier in spin-filter (sf) MTJ and establish the devices based on graphe...

(This article belongs to the Special Issue Advances in Magnetic Two Dimensional Materials)
  • Article
  • Open Access
9 Citations
4,863 Views
10 Pages

Carbon-Bonded Alumina Filters Coated by Graphene Oxide for Water Treatment

  • Ondřej Jankovský,
  • Michal Lojka,
  • Adéla Jiříčková,
  • Christos G. Aneziris and ,
  • Enrico Storti and
  • David Sedmidubský
  • + 1 author+ 0 author

24 April 2020

The aim of this paper is to prepare nano-functionalized ceramic foam filters from carbon-bonded alumina. The carbon-bonded filters were produced via the Schwartzwalder process using a two-step approach. The prepared ceramic foam filters were further...

(This article belongs to the Special Issue Synthesis and Properties of Nano-Based Composites)
  • Article
  • Open Access
8 Citations
2,072 Views
23 Pages

Nonlinear Slippage of Tensile Armor Layers of Unbonded Flexible Riser Subjected to Irregular Loads

  • Qingsheng Liu,
  • Zhongyuan Qu,
  • Xiaoya Liu,
  • Jiawei He and ,
  • Gang Wang,
  • Sicong Wang and
  • Feng Chen
  • + 2 authors+ 0 author

The unbonded flexible riser has been increasingly applied in the ocean engineering industry to transport oil and gas resources from the seabed to offshore platforms. The slippage of helical layers, especially the tensile armor layers of unbonded flex...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
1 Citations
2,139 Views
27 Pages

Structural Response of a Cement Concrete Pavement with a Buffer Layer to Temperature and Moving-Load Effects

  • Kun Wang,
  • Xiongao Li,
  • Peng Hu,
  • Liran Fan and ,
  • Hao Xu and
  • Lu Qu
  • + 1 author+ 0 author

15 February 2024

The main issues associated with cement concrete pavements are cracks and broken plates that affect driving comfort and road service life. To ensure sustainable use of the cement concrete, a buffer layer (AC-10) can be introduced between the base and...

  • Article
  • Open Access
13 Citations
5,575 Views
21 Pages

16 December 2019

Fluoropolymers represent a unique class of functional polymers due to their various interesting and important properties such as thermal stability, resistance toward chemicals, repellent behaviors, and their low refractive indices in comparison to ot...

(This article belongs to the Section Polymer Chemistry)
  • Article
  • Open Access
4 Citations
3,218 Views
17 Pages

Processing and Properties of Tungsten-Steel Composites and FGMs Prepared by Spark Plasma Sintering

  • Jiří Matějíček,
  • Radek Mušálek,
  • Zdeněk Dlabáček,
  • Veronika Klevarová and
  • Lenka Kocmanová

17 December 2022

Tungsten is the prime candidate material for the plasma-facing components of fusion reactors. For the joining of tungsten armor to the cooling system or support structure, composites or graded interlayers can be used to reduce the stress concentratio...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
7 Citations
3,155 Views
18 Pages

5 July 2023

Networks offer a compact representation of complex systems such as social, communication, and biological systems. Traditional network models are often inadequate to capture the diverse nature of contemporary networks, which may exhibit temporal varia...

  • Article
  • Open Access
12 Citations
6,101 Views
25 Pages

Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multimodal Analysis

  • Bolin Wang,
  • Min Yang,
  • Shilong Liu,
  • Xianda Liu and ,
  • Hongyu Zhao,
  • Xiangyu Wang,
  • Yishuang Liang and
  • Xiaofei Yao
  • + 3 authors+ 0 author

29 October 2024

Three-dimensional concrete printing (3DCP) technology with solid wastes has significant potential for sustainable construction. However, the hardened mechanical properties of components manufactured using 3DCP technology are affected by weak interlay...

  • Review
  • Open Access
613 Views
38 Pages

12 September 2026

Engineering components often require different properties in different regions, and a single material may not provide all of them. Reliable joining is important for refractory metal–steel, dissimilar superalloy, and Ti/Mg combinations. Field-as...

(This article belongs to the Section Powder Metallurgy)
  • Article
  • Open Access
592 Views
17 Pages

Impact of 2D h-BN Interlayer on Leakage Mechanisms and Device Performance Optimization in High-Reliability β-Ga2O3 MIS Devices

  • Yikun Li,
  • Jiarui Zhang,
  • Wenbin Liu,
  • Lei Wang and ,
  • Jinru Xie,
  • Jintong Xu and
  • Chenhui Yu
  • + 2 authors+ 0 author

4 August 2026

The ultra-wide bandgap semiconductor β-Ga2O3 is a promising material for next-generation optoelectronic systems and hybrid nanodevices. However, high interface state densities and anomalous trap-assisted leakage severely restrict its performance...

(This article belongs to the Special Issue Nanoscale Semiconductors for Optoelectronics)
  • Article
  • Open Access
4 Citations
2,258 Views
10 Pages

Electrical and Optical Properties of CaTi1−yFeyO3−δ Perovskite Films as Interlayers for Optoelectronic Applications

  • Ceren Yildirim,
  • Fabien Devoize,
  • Pierre-Marie Geffroy,
  • Frédéric Dumas-Bouchiat and ,
  • Johann Bouclé and
  • Sylvain Vedraine
  • + 1 author+ 0 author

21 September 2022

CaTi1−yFey O3−δ perovskite oxide films are promising candidate materials for p-type interlayers of third generation solar cells or light-emitting devices. The impact of atomic Ti substitutions by Fe on electrical and optical propert...

  • Review
  • Open Access
7 Citations
4,832 Views
20 Pages

Research Progress of Graphene and Its Derivatives towards Exhaled Breath Analysis

  • Xinxiu Yang,
  • Hong Chi,
  • Yong Tian,
  • Tianduo Li and
  • Yaoguang Wang

18 January 2022

The metabolic process of the human body produces a large number of gaseous biomarkers. The tracking and monitoring of certain diseases can be achieved through the detection of these markers. Due to the superior specific surface area, large functional...

(This article belongs to the Special Issue Application of Nanomaterials for Biosensors)
  • Review
  • Open Access
7 Citations
2,533 Views
23 Pages

Advances in Interfacial Engineering and Structural Optimization for Diamond Schottky Barrier Diodes

  • Shihao Lu,
  • Xufang Zhang,
  • Shichao Wang,
  • Mingkun Li and ,
  • Shuopei Jiao,
  • Yuesong Liang,
  • Wei Wang and
  • Jing Zhang
  • + 3 authors+ 0 author

4 August 2025

Diamond, renowned for its exceptional electrical, physical, and chemical properties, including ultra-wide bandgap, superior hardness, high thermal conductivity, and unparalleled stability, serves as an ideal candidate for next-generation high-power a...

(This article belongs to the Special Issue Properties, Processing and Applications of Diamond and Related Superhard Materials)
  • Review
  • Open Access
276 Views
44 Pages

Low-Temperature Plasma-Assisted Metallization of PTFE: A Focused Review

  • Meiyan Chen,
  • Jinru Ou,
  • Yue Zhang,
  • Xuan Liu and ,
  • Ke Yao,
  • Xueping Geng,
  • Deli Tang,
  • Wei Zou,
  • Fanya Jin and
  • Jun Zhou
  • + 5 authors+ 0 author

Polytetrafluoroethylene (PTFE) is an important dielectric and structural substrate for high-frequency, flexible, low-background, and other electronic systems because of its low dielectric loss, high electrical resistivity, low moisture absorption, ch...

(This article belongs to the Special Issue Ultra-Low-Power ICs for the Internet of Things (3rd Edition))
  • Article
  • Open Access
2,891 Views
10 Pages

Optical Properties and Growth Characteristics of 8-Quinolinolato Lithium (Liq) Nano-Layers Deposited by Gas Transport Deposition

  • Alexandros Zachariadis,
  • Michalis Chatzidis,
  • Despoina Tselekidou,
  • Olaf Wurzinger and ,
  • Dietmar Keiper,
  • Peter K. Baumann,
  • Michael Heuken,
  • Kyparisis Papadopoulos,
  • Argiris Laskarakis and
  • Maria Gioti
  • + 6 authors+ 1 author

28 August 2024

Organometallic complexes containing reactive alkali metals, such as lithium (Li), represent a promising material approach for electron injection layers and electron transport layers (EILs and ETLs) to enhance the performance of Organic Light-Emitting...

(This article belongs to the Special Issue Microelectronics and Optoelectronic Devices: From Fundamental Research to Advanced Applications)
  • Article
  • Open Access
10 Citations
3,259 Views
15 Pages

Improving the Corrosion Resistance of Wrought ZM21 Magnesium Alloys by Plasma Electrolytic Oxidation and Powder Coating

  • Lavanya Rani Ballam,
  • Hamed Arab,
  • Massimiliano Bestetti,
  • Silvia Franz and ,
  • Giulia Masi,
  • Ramona Sola,
  • Lorenzo Donati and
  • Carla Martini
  • + 3 authors+ 0 author

27 April 2021

Plasma Electrolytic Oxidation (PEO) was applied to extruded ZM21 Mg alloys to improve their corrosion resistance in a chloride-containing environment. PEO was carried out in DC mode and voltage control in a fluoride-free electrolyte. Potentiodynamic...

(This article belongs to the Special Issue Surface Modification of Metallic Materials)
  • Article
  • Open Access
14 Citations
2,854 Views
12 Pages

Functionalization of the Implant Surface Made of NiTi Shape Memory Alloy

  • Karolina Dudek,
  • Tomasz Goryczka,
  • Mateusz Dulski,
  • Bronisław Psiuk and ,
  • Agnieszka Szurko and
  • Zdzisław Lekston
  • + 1 author+ 0 author

15 February 2023

To functionalize and improve the biocompatibility of the surface of a medical implant made of NiTi shape memory alloy and used in practice, a clamp, multifunctional layers composed of amorphous TiO2 interlayer, and a hydroxyapatite coating were produ...

(This article belongs to the Special Issue Nanoparticles and Nanotechnology: From the Synthesis to Application)
  • Article
  • Open Access
52 Citations
10,096 Views
10 Pages

4 February 2016

Graphene oxide (GO) was functionalized and reduced simultaneously by a new reductant, 4-hydrazinobenzenesulfonic acid (HBS), with a one-step and environmentally friendly process. The hydrophilic sulfonic acid group in HBS was grafted onto the surface...

  • Review
  • Open Access
55 Citations
10,671 Views
25 Pages

18 December 2019

The demand for additively manufactured polymer composites with increased specific properties and functional microstructure has drastically increased over the past decade. The ability to manufacture complex designs that can maximize strength while red...

  • Article
  • Open Access
51 Citations
5,962 Views
19 Pages

Design and Modification of a Material Extrusion 3D Printer to Manufacture Functional Gradient PEEK Components

  • Tobias Ritter,
  • Eric McNiffe,
  • Tom Higgins,
  • Omid Sam-Daliri and ,
  • Tomas Flanagan,
  • Michael Walls,
  • Pouyan Ghabezi,
  • William Finnegan,
  • Sinéad Mitchell and
  • Noel M. Harrison
  • + 5 authors+ 0 author

19 September 2023

In recent years, the creative use of polymers has been expanded as the range of achievable material properties and options for manufacturing and post-processing continually grows. The main goal of this research was to design and develop a fully-funct...

(This article belongs to the Special Issue Advances in Rheology and Polymer Processing)
  • Feature Paper
  • Article
  • Open Access
820 Views
20 Pages

Wet Chemical Synthesis of Benzalkonium Chloride-Hectorite Composites: Structural Regulation and Enhanced Antibacterial/Antifungal Performance for Indoor High-Humidity Decorative Materials

  • Changchun Liu,
  • Feng Yang,
  • Wenkang Zhang,
  • Feiya Shi and ,
  • Shirong Xu,
  • Taotao Yu,
  • Jin Cheng,
  • Ruize Chen,
  • Chen Fang and
  • Kenji Ogino
  • + 7 authors+ 2 authors

To mitigate health hazards from pathogenic bacteria (Escherichia coli, Staphylococcus aureus) and fungi (Aspergillus niger) as well as the coating mildew issue in high-humidity indoor environments, and to overcome the challenges of particle agglomera...

(This article belongs to the Special Issue Advanced Functional Coatings: Synthesis, Characterization, and Multifunctional Applications in Energy, Antimicrobial, and Corrosion Resistance)
  • Review
  • Open Access
9 Citations
5,688 Views
16 Pages

Improved Charge Injection and Transport of Light-Emitting Diodes Based on Two-Dimensional Materials

  • Yuanming Zhou,
  • Sijiong Mei,
  • Dongwei Sun,
  • Neng Liu and ,
  • Fei Mei,
  • Jinxia Xu and
  • Xianan Cao
  • + 2 authors+ 0 author

3 October 2019

Light-emitting diodes (LEDs) are considered to be the most promising energy-saving technology for future lighting and display. Two-dimensional (2D) materials, a class of materials comprised of monolayer or few layers of atoms (or unit cells), have at...

(This article belongs to the Special Issue Novel and Efficient Semiconductor-based Light Sources)
  • Article
  • Open Access
19 Citations
5,065 Views
25 Pages

23 January 2022

Layered two-dimensional transition metal dichalcogenides and their heterostructures are of current interest, owing to the diversity of their applications in many areas of materials nanoscience and technologies. With this in mind, we have examined the...

(This article belongs to the Section Physical Chemistry and Chemical Physics)
  • Article
  • Open Access
1 Citations
1,968 Views
25 Pages

Enhanced Mechanical Robustness of Sprayed Cellulose Nanofibril Coatings Through Internal Crosslinking with Boric Acid

  • Pieter Samyn,
  • Patrick Cosemans,
  • Erik V. Van der Eycken and
  • Guglielmo A. Coppola

10 September 2025

The enhanced mechanical durability of sprayed nanocellulose coatings at the macroscopic level is primarily required to promote their application in demanding industrial applications with frequently exposed surfaces. In this study, different coating c...

(This article belongs to the Special Issue Preparation and Application of Cellulose-Based and Chitosan-Based Materials)
  • Article
  • Open Access
2,108 Views
18 Pages

Unraveling the Interactions between Lithium and Twisted Graphene

  • Maximo Ramírez,
  • Giorgio De Luca and
  • Lorenzo Caputi

23 April 2024

Graphene is undoubtedly the carbon allotrope that has attracted the attention of a myriad of researchers in the last decades more than any other. The interaction of external or intercalated Li and Li+ with graphene layers has been the subject of part...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
4 Citations
2,668 Views
16 Pages

Inhomogeneous Superconductivity Onset in FeSe Studied by Transport Properties

  • Pavel D. Grigoriev,
  • Vladislav D. Kochev,
  • Andrey P. Orlov,
  • Aleksei V. Frolov and
  • Alexander A. Sinchenko

23 February 2023

Heterogeneous superconductivity onset is a common phenomenon in high-Tc superconductors of both the cuprate and iron-based families. It is manifested by a fairly wide transition from the metallic to zero-resistance states. Usually, in these strongly...

(This article belongs to the Special Issue Engineering Properties of Superconducting Materials (Second Volume))
  • Article
  • Open Access
215 Views
23 Pages

14 October 2026

Non-Newtonian yield-stress slurries in the presence of entrained gas is a core operation in chemical, mineral-processing, pharmaceutical, and functional-material manufacturing. In such systems, non-Newtonian rheology, gas–liquid interface defor...

(This article belongs to the Section Chemical Processes and Systems)
  • Review
  • Open Access
1 Citations
1,206 Views
60 Pages

Advances in Forming Processes of Carbon Fiber-Reinforced Thermoplastic Composites: From Material Challenges to Interface Engineering

  • Liran Sun,
  • Shuo Wu,
  • Donglong Chu,
  • Tianshu Wang and ,
  • Wei Shen,
  • Zongan Li,
  • Yongkang Fu,
  • Wenbo Li and
  • Shilong Xing
  • + 4 authors+ 0 author

10 July 2026

Carbon fiber-reinforced thermoplastic composites (CFRTPs) have attracted increasing attention in aerospace, transportation, marine engineering, and other advanced manufacturing fields owing to their high specific mechanical properties, impact resista...

  • Article
  • Open Access
14 Citations
3,805 Views
19 Pages

The Graphene Structure’s Effects on the Current-Voltage and Photovoltaic Characteristics of Directly Synthesized Graphene/n-Si(100) Diodes

  • Šarūnas Jankauskas,
  • Rimantas Gudaitis,
  • Andrius Vasiliauskas,
  • Asta Guobienė and
  • Šarūnas Meškinis

11 May 2022

Graphene was synthesized directly on Si(100) substrates by microwave plasma-enhanced chemical vapor deposition (MW-PECVD). The effects of the graphene structure on the electrical and photovoltaic properties of graphene/n-Si(100) were studied. The sam...

(This article belongs to the Topic Advances and Applications of 2D Materials)
  • Article
  • Open Access
1 Citations
1,481 Views
17 Pages

Robust Anionic Framework Based on Sodium–Cerium Terephthalate

  • Nikita Nikandrov,
  • Sofya Spasskaya,
  • Marina Tedeeva,
  • Alexander Kustov and
  • Dmitry Tsymbarenko

27 October 2025

Synthesis of anionic metal–organic framework Na[Ce(BDC)2(DMF)2] based on cerium (III)–sodium terephthalate was performed. The crystal structure, studied by the Rietveld method, consists of anionic [Ce(BDC)2]− layers, connected by in...

(This article belongs to the Special Issue 30th Anniversary of the MOF Concept)
  • Review
  • Open Access
62 Citations
12,228 Views
16 Pages

MXene Film Prepared by Vacuum-Assisted Filtration: Properties and Applications

  • Jingfeng Wang,
  • Jiabei He,
  • Dongxiao Kan,
  • Kaiyun Chen and ,
  • Mengshan Song and
  • Wangtu Huo
  • + 1 author+ 0 author

26 July 2022

MXene (Ti3C2Tx) film prepared by vacuum-assisted filtration (V-MXene film) is the most common 2D MXene macroscopic assembly with ultra-high electrical conductivity, tunable interlayer space, diverse surface chemical properties, favorable mechanical p...

  • Article
  • Open Access
1 Citations
1,396 Views
18 Pages

Microstructural Characteristics of Graded Ni-Fe Coatings Fabricated Through DED-L

  • Marco Brand,
  • Ion-Dragoş Uțu,
  • Nicușor-Alin Sîrbu,
  • Ion-Aurel Perianu and ,
  • Denis Andrei Predu and
  • Gabriela Mărginean
  • + 1 author+ 0 author

9 January 2026

Directed Energy Deposition-Laser (DED-L) enables high-performance coatings through melting and successive powder deposition. Its compositional flexibility suits functionally graded layers that enhance corrosion and wear resistance. This study aimed t...

(This article belongs to the Special Issue Advanced Coating Research for Metal Surface Protection)
  • Review
  • Open Access
31 Citations
6,166 Views
21 Pages

Fully Hydrogenated and Fluorinated Bigraphenes–Diamanes: Theoretical and Experimental Studies

  • Leonid A. Chernozatonskii,
  • Victor A. Demin and
  • Dmitry G. Kvashnin

2 February 2021

Diamanes are 2D diamond-like films that are nanometers in thickness. Diamanes can exist as bilayer or multilayer graphene with various modes of stacking and interlayer covalent sp3 bonds. The term “diamane” is used broadly for a variety of diamond-li...

(This article belongs to the Special Issue 2D Ultrathin Carbon Films)
  • Article
  • Open Access
16 Citations
4,875 Views
11 Pages

Nanocomposite Synthesis of Nanodiamond and Molybdenum Disulfide

  • Youngjun Kim,
  • Dukhee Lee,
  • Soo Young Kim,
  • Eunah Kang and
  • Chang Keun Kim

A chemically conjugated nanodiamond (ND)/MoS2 nanocomposite was synthesized with amine-functionalized MoS2 and acyl chloride-coordinated ND. The chemical structure and morphology of the nanocomposite were characterized to examine the dispersion of Mo...

(This article belongs to the Special Issue Characterization, Synthesis and Applications of 2D Nanomaterials)
  • Article
  • Open Access
5 Citations
3,286 Views
10 Pages

Adsorption Tuning of Polarity and Magnetism in AgCr2S4 Monolayer

  • Ranran Li,
  • Yu Wang,
  • Ning Ding,
  • Shuai Dong and
  • Ming An

12 April 2023

As a recent successfully exfoliated non-van der Waals layered material, AgCrS2 has received a lot of attention. Motivated by its structure-related magnetic and ferroelectric behavior, a theoretical study on its exfoliated monolayer AgCr2S4 has been c...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
7 Citations
3,009 Views
11 Pages

Porous Activated Carbons Derived from Coffee Waste for Use as Functional Separators in Lithium-Sulfur Batteries

  • Jae-Hoon Shin,
  • Yu-Yeon Park,
  • Sang-Hyun Moon,
  • Ji-Hwan Kim and ,
  • Jae-Sung Jang,
  • Sung-Beom Kim,
  • Seong-Nam Lee and
  • Kyung-Won Park
  • + 3 authors+ 0 author

27 October 2022

A novel approach has been proposed for improving the performance of lithium-sulfur batteries (LSBs) with a carbon-based material as an interlayer between the cathode and separator. With this method, the cross-over of lithium polysulfides (LiPS) to th...

(This article belongs to the Section D2: Electrochem: Batteries, Fuel Cells, Capacitors)
  • Article
  • Open Access
2 Citations
3,626 Views
11 Pages

Combing High-Modulus Fibers with a Novel Foaming Structure Applied to Protective Sandwich-Structured Composites: Manufacturing Techniques and Property Evaluations

  • Yi-Huan Ho,
  • Yan-Yu Lin,
  • Mei-Chen Lin,
  • Ching-Wen Lou and ,
  • Yueh-Sheng Chen and
  • Jia-Horng Lin
  • + 1 author+ 0 author

13 January 2023

This study proposes the composites with a sandwich structure that is primarily made by the multi-step foaming process. The staple material is polyurethane (PU) foam that is combined with carbon fibers, followed by a Kevlar woven fabric. The composite...

(This article belongs to the Section Polymer Fibers)
  • Article
  • Open Access
5 Citations
1,541 Views
20 Pages

IESSP: Information Extraction-Based Sparse Stripe Pruning Method for Deep Neural Networks

  • Jingjing Liu,
  • Lingjin Huang,
  • Manlong Feng,
  • Aiying Guo and ,
  • Luqiao Yin and
  • Jianhua Zhang
  • + 1 author+ 0 author

3 April 2025

Network pruning is a deep learning model compression technique aimed at reducing model storage requirements and decreasing computational resource consumption. However, mainstream pruning techniques often encounter challenges such as limited precision...

(This article belongs to the Special Issue Machine Learning in Image/Video Processing and Sensing)
  • Review
  • Open Access
3 Citations
2,454 Views
30 Pages

Electrospun Janus Fibrous Membranes: Property and Potential Biomedical Applications

  • Haodong Chen,
  • Wenbo Wu,
  • Xinyu Li,
  • Lili Gao and
  • Tifeng Jiao

26 February 2026

The Janus membrane, as a kind of functional material with asymmetric wettability, is endowed with a unique “liquid diode” effect by its hydrophilic/hydrophobic properties on both sides, which can realize unidirectional fluid transport tha...

(This article belongs to the Special Issue Emerging Trends in Functional Coatings for Biomedical Applications)
  • Article
  • Open Access
35 Citations
6,842 Views
21 Pages

Kinetics of Cross-Linking Reaction of Epoxy Resin with Hydroxyapatite-Functionalized Layered Double Hydroxides

  • Zohre Karami,
  • Mohammad Reza Ganjali,
  • Maryam Zarghami Dehaghani,
  • Mustafa Aghazadeh and ,
  • Maryam Jouyandeh,
  • Amin Esmaeili,
  • Sajjad Habibzadeh,
  • Ahmad Mohaddespour,
  • Inamuddin and
  • Mohammad Reza Saeb
  • + 7 authors+ 2 authors

18 May 2020

The cure kinetics analysis of thermoset polymer composites gives useful information about their properties. In this work, two types of layered double hydroxide (LDH) consisting of Mg2+ and Zn2+ as divalent metal ions and CO32− as an anion inter...

(This article belongs to the Special Issue Epoxy Resins and Composites)

of 11