- Article
In this study, the grain growth behaviour of ZnO-V2O5-based ceramics with 0.25–0.75 mol% additions of PrMnO3 was systematically investigated during sintering from 850 °C to 925 °C. with the aim to control the ZnO grain size for their ap...
In this study, the grain growth behaviour of ZnO-V2O5-based ceramics with 0.25–0.75 mol% additions of PrMnO3 was systematically investigated during sintering from 850 °C to 925 °C. with the aim to control the ZnO grain size for their ap...
In this study, Fe2O3–TiO2 nanocomposites with different TiO2 contents (1–50%) were synthesized via a solvothermal method using pre-formed α-Fe2O3 nanoparticles as cores. We systematically evaluated the influence of TiO2 loading on t...
The aim of this study is to clarify the effect of doped metal type on CO2 reduction characteristics of TiO2 with NH3 and H2O. Cu and Pd have been selected as dopants for TiO2. In addition, the impact of molar ratio of CO2 to reductants NH3 and H2O ha...
Ethoxycarbonyl cyanohydrins and O-acyl cyanohydrins are examples of O-protected cyanohydrins in which the protecting group presents an electrophilic center, contributing to additional reaction pathways. The first section of this review describes rece...
Suppressing the usage of rare-earth elements is crucial for making the catalysts sustainable. Preparing CeO2 nanoparticles is a common technique to reduce CeO2 consumption, but such nanoparticles are prone to sinter or react with the supports when su...
Emission of hazardous trace elements, especially arsenic from fossil fuel combustion, have become a major concern. Under an oxidizing atmosphere, most of the arsenic converts to gaseous As2O3. CaO has been proven effective in capturing As2O3. In this...
Protein O-GlcNAcylation is a dynamic post-translational modification involving the attachment of N-acetylglucosamine (GlcNAc) to the hydroxyl groups of Ser/Thr residues on numerous nucleocytoplasmic proteins. Two enzymes are responsible for O-GlcNAc...
Oxy-steam combustion is a new oxy-fuel combustion technology. This paper focuses on the NO emission characteristics during the combustion of SF (Shen Fu) coal in O2/N2 and O2/H2O mixtures. Experiments were performed in a drop-tube furnace. Combustion...
The catalytic properties of CuO-CeO2 supported on alumina for the oxidative steam reforming (OSR) of dimethoxymethane (DMM) to hydrogen-rich gas in a tubular fixed bed reactor were studied. The CuO-CeO2/γ-Al2O3 catalyst provided complete DMM co...
In this paper, the photocatalytic degradation of methyl orange solution by MnO2/TiO2 nanotube arrays (NTAs) with different structure was studied. Initially, bamboo-like TiO2 NTAs with folded tube walls were synthesized using the anodic oxidation meth...
Improving the photocatalytic performance of multi-component photocatalysts through structural modulation and band alignment engineering has attracted great interest in the context of solar energy utilization and conversion. In our work, Zn2SnO4/SnO2...
Waste drilling fluids produced from oil extraction can cause serious harm to the ecological environment; thus, the treatment of waste drilling fluids is urgent and important to ensure the sustainability and development of the oil extraction. In this...
Transparent materials in contact with harmful environments such as sandstorms are exposed to surface damage. Transparent MgAl2O4 spinel used as protective window, lens or laser exit port, among others, is one of the materials affected by natural aggr...
The study is directed to the search of a simple effective catalyst for ethyl lactate obtained from fructose as renewable raw material. A series of SnO2-containing oxides prepared by impregnation of alumina were characterized by several techniques in...
Background: In patients with COVID-19 pneumonia, the estimation of PaO2 represents the method of choice for monitoring a patient’s oxygenation status and assessing disease severity. The aim of this study is, therefore, to investigate the correl...
The long-term corrosion behavior of Al2O3-3%TiO2 (AT3) coatings doped with1%, 5% and 8% CeO2 prepared by plasma spraying was studied in 5% NaCl solution. The results showed that the protective performance of CeO2-doped coatings was significantly high...
Solution combustion synthesis was used to produce a junction between different TiO2 supports (anatase TiO2 nanorods (TNR) and nanoparticles (TNP) and TiO2 with anatase core and amorphous shell (a-TNR)) and narrow bandgap (BG) semiconductor β-Bi2...
Direct decomposition of NO into N2 and O2 (2NO→N2 + O2) is recognized as the “ideal” reaction for NOx removal because it needs no reductant. It was reported that the spinel Co3O4 is one of the most active single-element oxide catalys...
In TiO2-based perovskite solar cells (PSC), the preparation of the CH3NH3PbI3/TiO2 composite layer is very important, since the morphology of the perovskite adsorbed onto the surface of the TiO2 nanoparticles has decisive significance for the absorpt...
Rapid progress in the development of highly efficient nanoparticle-based construction technologies has not always been accompanied by a corresponding understanding of their effects on human health and ecosystems. In this study, we compare the toxicol...
Significant research accomplishments have been made so far for the development and application of ZnO nanomaterials in enhanced optical biodetection. The unparalleled optical properties of ZnO nanomaterials and their reduced dimensionality have been...
A dense Cr2O3/Al2O3 composite coating was fabricated on 321L stainless steel by electrodepositing an Al2O3 layer on a Cr2O3 coating. The composition, structure, and properties of the obtained ceramic coating were investigated. The results showed that...
In this work, Y2O3–Al2O3 dielectrics were prepared and used in ZnO thin film transistor as gate insulators. The Y2O3 film prepared by the sol–gel method has many surface defects, resulting in a high density of interface states with the active layer i...
Modern industrial systems and biomass-fired furnaces require surface treatments that can withstand aggressive chemical, thermal, and corrosive environments. This study investigates the corrosion and thermal resistance of plasma-sprayed Al2O3-TiO2 coa...
Ti4+-ion-doped (n + 1)SrO − nCeO2 (n = 2) ceramic systems were prepared with the conventional solid-state reaction method, and the effects of the phase structures and compositions, sintering behaviors, microstructures and microwave dielectric p...
In this study, SiO–Al2O–TiO2 ceramic composites were synthesized at 850 °C using a conventional electric kiln. Photocatalytic UV-A-assisted removal tests of MB solutions were conducted on the samples under 365 nm UV-A near-ultraviolet...
Advanced oxidation processes (AOPs) have emerged as a promising approach for the removal of organic dyes from effluents. Different AOPs were employed for the degradation of Reactive Yellow 160A (RY-160A) dye, i.e., SnO2/UV/H2O2 and TiO2/UV/H2O2. In t...
Hybrids of semiconductor nanomaterials often demonstrate properties that are superior to those of their components. In this study, we prepared hybrid nanomaterials of TiO2 and ZnO, which are among the most actively studied semiconductors, by means of...
Thermal shock resistance is a critical parameter for evaluating the long-term service reliability of protective coatings in high-temperature molten-salt environments. In this study, Al2O3–Y2O3 composite coatings containing 0, 2, 5, and 8 wt.% Y...
CuO/ZnO/ZrO2 catalyst systems were synthesized in different ways and comprehensively characterized in order to study synthesis-to-property relations. A series of catalyst samples was prepared by coprecipitation, one-pot synthesis, and wet impregnatio...
NiWAu trimetallic nanoparticles (NPs) on the surface of support Al2O3-CeO2-TiO2 were synthesized by a three-step synthetic method in which Au NPs were incorporated into presynthesized NiW/Al2O3-CeO2-TiO2. The recharge method, also known as the redox...
A pulse oximeter model linking arterial (SaO2) and peripheral (SpO2) oxygen saturation is the terminal part of a mathematical model of neonatal oxygen transport. Previous studies have confirmed the overestimation of oxygen saturation measured by puls...
With zinc acetate and butyl titanate as raw materials, pure ZnO and ZnTiO3/ZnO composite photocatalysts were synthesized by a sol–gel method and calcined at 550 °C. The crystal structure, morphology, surface area, optical property, and elem...
Efficient and general protocols for the O-tert-boc protection and O-arylation of phenols were developed in this paper using a recyclable magnetic Fe3O4-Co3O4 nanocatalyst (Nano-Fe-Co), which is easily accessible via simple wet impregnation techniques...
A facile solvo-hydrothermal method was used to synthesize sub-100 nm diameter TiO2/α-Fe2O3@SiO2 nanorods (TiO2/HNRs@SiO2). Thermal annealing of TiO2/HNRs@SiO2 activated the photosensitizing crystalline TiO2 domains containing mixed anatase and...
In order to reduce the primary particle size of zinc oxide (ZnO) and eliminate the agglomeration phenomenon to form a monodisperse state, Zn2+ was loaded on the surface of amorphous silica (SiO2) by the hydrogen bond association between hydroxyl grou...
The study compares the photocatalytic behavior of TiO2, NiO-TiO2, and Ni-NiO-TiO2 photocatalysts in photocatalytic hydrogen production from methanol–water solution. TiO2 and NiO-TiO2 photocatalysts with theoretical NiO loading of 0.5, 1.0, and...
Heavy metal oxide glasses, containing bismuth and/or lead in their glass structure are new alternatives for rare eart (RE) doped hosts. Hence, the study of the structure of these vitreous systems is of great interest for science and technology. In th...
ZrO2 is an excellent ceramic preparation material that can maintain chemical stability in medium–strong acid and alkali environments. The sintering impregnation method was used to prepare the ZrO2/TiO2/Al2O3 composite nanofiltration membrane (Z...
In this research we report the gas-sensing properties of TiO2-x/TiO2-based hetero-structure, which was ‘self-heated’ by current that at constant potential passed through the structure. Amperometric measurements were applied for the evalua...
New aluminum grain refiners, Al-TiO2-C-XLa2O3 refiners, were manufactured by the in situ reaction of Al powder, TiO2 powder, C powder, and La2O3 powder. The effects of La2O3 on the refiners’ microstructure and the grain refining effect of the A...
Ion exchange membranes are used in practically every industry; however, most of them have defects such as low permeability and poor oxidation resistance. In this paper, cation-exchange membranes were prepared with poly (vinylidene fluoride) (PVDF) bl...
The effect of Rh loading on CO sensing was studied for the case of In2O3. This was done by performing measurements with sensors based on loaded and unloaded materials that were performed at an operation temperature of 300 °C in the presence of lo...
The use of a coal-based energy structure generates a large amount of CO2 and NOx. The numerous emissions from these agents result in acid rain, photochemical smog, and haze. This environmental problem is considered one of the greatest challenges faci...
Amorphous CeO2-TiO2 nanoparticles synthesized by the H2O2-modified sol-gel method were investigated in terms of the Ce-O-Ce and Ti-O-Ti linkage, local structure, and redox properties. The decrease in the crystallinity of CeO2-TiO2 by H2O2 addition wa...
Hybrid nanomaterials integrating magnetic and semiconductor phases offer promising multifunctional platforms for wastewater remediation; however, their stabilization and recovery remain challenging. In this study, Fe3O4 and ZnTiO3/TiO2 nanoparticles...
This work reports on Fe2O3 and ZnO materials for lactate quantification. In the synthesis, the bi-phase γ-/α-Fe2O3 and γ-/α-Fe2O3/ZnO nanoparticles (NPs) were obtained for their application in a lactate colorimetric sensor. Th...
In this study, solidified films of CaO-Al2O3-BaO-CaF2-Li2O-based mold fluxes with different contents of Al2O3 addition were acquired by immersing an improved water-cooled copper probe in bulk molten slags. This probe can obtain films with representat...
Furfural was oxidized to furoic acid by molecular oxygen under catalysis by 150nm-sized Ag2O/CuO (92%) or simply CuO (86.6%). When 30 nm-size catalyst was used,the main product was a furfural Diels-Alder adduct. Detailed reaction conditions andregene...
Steel quality and properties can be affected by the formation of complex inclusions, including Ti-based inclusions such as TiN and Ti2O3 and oxides like Al2O3 and MgO·Al2O3 (MA). This study assessed the prospective use of Raman spectroscopy to charac...
of 2,073