Skip to Content

201 Results Found

  • Article
  • Open Access
11 Citations
6,718 Views
9 Pages

Optimization of Oxygen Plasma Treatment on Ohmic Contact for AlGaN/GaN HEMTs on High-Resistivity Si Substrate

  • Pengfei Li,
  • Shuhua Wei,
  • Xuanwu Kang,
  • Yingkui Zheng and ,
  • Jing Zhang,
  • Hao Wu,
  • Ke Wei,
  • Jiang Yan and
  • Xinyu Liu
  • + 4 authors+ 0 author

The oxygen plasma surface treatment prior to ohmic metal deposition was developed to reduce the ohmic contact resistance (RC) for AlGaN/GaN high electron mobility transistors (HEMTs) on a high-resistive Si substrate. The oxygen plasma, which was prod...

(This article belongs to the Section Semiconductor Devices)
  • Article
  • Open Access
11 Citations
2,992 Views
11 Pages

Design of Ag/TiO2/Ag Composite Nano-Array Structure with Adjustable SERS-Activity

  • Xiaoyu Zhao,
  • Wei Xu,
  • Xiuxia Tang,
  • Jiahong Wen and
  • Yaxin Wang

19 October 2022

How to fabricate large area controllable surface-enhanced Raman scattering (SERS) active nanostructure substrates has always been one of the important issues in the development of nanostructure devices. In this paper, nano-etching technology and magn...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
35 Citations
4,251 Views
14 Pages

Effect of Plasma Treatment on Bamboo Fiber-Reinforced Epoxy Composites

  • Pornchai Rachtanapun,
  • Choncharoen Sawangrat,
  • Thidarat Kanthiya,
  • Parichat Thipchai and ,
  • Kannikar Kaewapai,
  • Jonghwan Suhr,
  • Patnarin Worajittiphon,
  • Nuttapol Tanadchangsaeng,
  • Pitiwat Wattanachai and
  • Kittisak Jantanasakulwong
  • + 5 authors+ 0 author

29 March 2024

Bamboo cellulose fiber (BF)-reinforced epoxy (EP) composites were fabricated with BF subjected to plasma treatment using argon (Ar), oxygen (O2), and nitrogen (N2) gases. Optimal mechanical properties of the EP/BF composites were achieved with BFs su...

(This article belongs to the Section Biobased and Biodegradable Polymers)
  • Article
  • Open Access
4 Citations
5,647 Views
20 Pages

Investigating the Nucleation of AlOx and HfOx ALD on Polyimide: Influence of Plasma Activation

  • Laura Astoreca,
  • David Schaubroeck,
  • Parinaz Saadat Esbah Tabaei,
  • Rouba Ghobeira and ,
  • Maaike Op de Beeck,
  • Rino Morent,
  • Herbert De Smet and
  • Nathalie De Geyter
  • + 3 authors+ 0 author

3 November 2021

There is an increasing interest in atomic layer deposition (ALD) on polymers for the development of membranes, electronics, (3D) nanostructures and specially for the development of hermetic packaging of the new generation of flexible implantable micr...

(This article belongs to the Section Thin Films)
  • Article
  • Open Access
16 Citations
7,477 Views
10 Pages

Improvement of Plasma Resistance of Anodic Aluminum-Oxide Film in Sulfuric Acid Containing Cerium(IV) Ion

  • Jongho So,
  • Eunmi Choi,
  • Jin-Tae Kim,
  • Jae-Soo Shin and ,
  • Je-Boem Song,
  • Minjoong Kim,
  • Chin-Wook Chung and
  • Ju-Young Yun
  • + 3 authors+ 0 author

23 January 2020

The parts of equipment in a process chamber for semiconductors are protected with an anodic aluminum-oxide (AAO) film to prevent plasma corrosion. We added cerium(IV) ions to sulfuric acid in the anodizing of an AAO film to improve the plasma corrosi...

  • Article
  • Open Access
556 Views
11 Pages

Fabrication of Sapphire-Embedded Ultra-Wear-Resistant Metal Grids

  • Gaoyuan Mi,
  • Songlin Wang,
  • Jianfu Zhang,
  • Runqing Li and ,
  • Qingqing Wu,
  • Xiang Zhang,
  • Wanhong Yin and
  • Tianyu Wu
  • + 3 authors+ 0 author

30 January 2026

To address poor wear resistance of surface metal grids for optical windows and low efficiency and poor uniformity of traditional embedded technologies, this study fabricates ultra-wear-resistant embedded metal grids on 180 mm × 180 mm × 8...

(This article belongs to the Special Issue Surface Modification Techniques Utilizing Plasma and Photonic Methods)
  • Article
  • Open Access
10 Citations
4,302 Views
10 Pages

Study of Gliding Arc Plasma Treatment for Bamboo-Culm Surface Modification

  • Bin Li,
  • Jinxing Li,
  • Xiaojian Zhou,
  • Jun Zhang and ,
  • Taohong Li and
  • Guanben Du
  • + 1 author+ 0 author

1 December 2019

Plasma treatment was conducted to modify the outer- and inner-layer surfaces of bamboo in a multi-factor experiment, where the surface contact angles and surface energy were measured, followed by investigation on the surface microstructure and functi...

(This article belongs to the Special Issue Wood Protection and Preservation)
  • Article
  • Open Access
25 Citations
6,005 Views
10 Pages

20 October 2021

For chronic applications of flexible neural implants, e.g., intracortical probes, the flexible substrate material has to encapsulate the electrical conductors with a long-term stability against the saline environment of the neural tissue. The biocomp...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
6 Citations
5,868 Views
9 Pages

Surface Modification of Electroosmotic Silicon Microchannel Using Thermal Dry Oxidation

  • Tuan Norjihan Tuan Yaakub,
  • Jumril Yunas,
  • Rhonira Latif,
  • Azrul Azlan Hamzah and ,
  • Mohd Farhanulhakim Mohd Razip Wee and
  • Burhanuddin Yeop Majlis
  • + 1 author+ 0 author

A simple fabrication method for the surface modification of an electroosmotic silicon microchannel using thermal dry oxidation is presented. The surface modification is done by coating the silicon surface with a silicon dioxide (SiO2) layer using a t...

(This article belongs to the Special Issue Silicon Micromachined Devices: Outlook and Challenges for Future Applications)
  • Communication
  • Open Access
4 Citations
3,360 Views
8 Pages

Improvement of Laser Damage Resistance of Fused Silica Using Oxygen-Aided Reactive Ion Etching

  • Ting Shao,
  • Jun Zhang,
  • Zhaohua Shi,
  • Weihua Li and ,
  • Ping Li,
  • Laixi Sun and
  • Wanguo Zheng
  • + 2 authors+ 0 author

Reactive ion etching (RIE) with fluorocarbon plasma is a facile method to tracelessly remove the subsurface damage layer of fused silica but has the drawback of unsatisfactory improvement in laser damage resistance due to the induction of secondary d...

(This article belongs to the Section Optoelectronics and Optical Materials)
  • Article
  • Open Access
21 Citations
7,012 Views
16 Pages

Effect of H2O-Based Low-Pressure Plasma (LPP) Treatment on the Germination of Bambara Groundnut Seeds

  • Naeem Ahmed,
  • Asad Masood,
  • Kim S. Siow,
  • M. F. Mohd Razip Wee and ,
  • Rahmat Zaki Auliya and
  • Wai Kuan Ho
  • + 1 author+ 0 author

14 February 2021

In general, seed germination is improved by low-pressure plasma (LPP) treatment using precursors such as air, nitrogen, argon, or water (H2O). Here, H2O-based LPP treatment using the optimized parameters of 10 W and 10 s improves the germination of B...

(This article belongs to the Special Issue Applied High-Voltage Plasma Technologies in Agricultural Industry)
  • Proceeding Paper
  • Open Access
16 Citations
4,323 Views
5 Pages

Fabrication of ZnO Nanorods on MEMS Piezoresistive Silicon Microcantilevers for Environmental Monitoring

  • Jiushuai Xu,
  • Maik Bertke,
  • Alaaeldin Gad,
  • Feng Yu and ,
  • Gerry Hamdana,
  • Andrey Bakin and
  • Erwin Peiner
  • + 2 authors+ 0 author

In this study, a ZnO nanorods (NRs) patterned MEMS piezoresistive silicon micro-cantilever was fabricated as environmental monitor. The fabrication starts from bulk silicon, utilizing photolithography, diffusion, inductively coupled plasma (ICP) cryo...

(This article belongs to the Proceedings of Proceedings of Eurosensors 2017, Paris, France, 3–6 September 2017)
  • Article
  • Open Access
7 Citations
2,503 Views
17 Pages

Surface Modifications of Wheat Cultivar Bologna upon Treatment with Non-Equilibrium Gaseous Plasma

  • Matej Holc,
  • Alenka Vesel,
  • Rok Zaplotnik,
  • Domen Paul and ,
  • Gregor Primc,
  • Miran Mozetič,
  • Peter Gselman and
  • Nina Recek
  • + 3 authors+ 0 author

11 June 2022

Seeds of wheat cultivar Bologna were treated with a low-pressure, inductively coupled, radio frequency oxygen plasma. E-mode and H-mode plasma at the real powers of 25 and 275 W, respectively, was used at treatment times of 0.1–300 s. Plasma af...

(This article belongs to the Section Plant Development and Morphogenesis)
  • Article
  • Open Access
13 Citations
3,702 Views
14 Pages

Catalytic Performance of Palladium Supported on Sheaf-Like Ceria in the Lean Methane Combustion

  • Shuna Li,
  • Yagang Zhang,
  • Jing Shi,
  • Gang Zhu and ,
  • Yanxiang Xie,
  • Zhikai Li,
  • Ruiyi Wang and
  • Huaqing Zhu
  • + 3 authors+ 0 author

21 December 2019

Sheaf-like CeO2 (CeO2-S) in microscale was prepared by the hydrothermal method, and then etched with KOH aiming to obtain an imperfect fluorite structure (CeO2-SK) with high content of oxygen vacancies and oxygen mobility. With CeO2-S and CeO2-SK as...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
14 Citations
2,463 Views
23 Pages

Study of the Effects of Plasma Pretreatment on the Microstructure of Peanuts

  • Yingnan Wang,
  • Qu Yao,
  • Xingjun Li,
  • Jun Yin and ,
  • Zhongjie Zhang and
  • Xianqing Zhou
  • + 1 author+ 0 author

2 September 2024

In this study, cold plasma treatments are employed to modify peanuts. This study systematically investigates the effects of various plasma treatment conditions, including power, duration, and gas type, on the microstructure of peanut seed coats and e...

  • Article
  • Open Access
6 Citations
2,802 Views
14 Pages

Interface Adhesion Property and Laser Ablation Performance of GAP-PET Double-Layer Tape with Plasma Treatment

  • Sibo Wang,
  • Bangdeng Du,
  • Baoyu Xing,
  • Yanji Hong and ,
  • Ying Wang,
  • Baosheng Du,
  • Yongzan Zheng,
  • Jifei Ye and
  • Chenglin Li
  • + 4 authors+ 0 author

26 May 2022

In the field of laser ablation micro-propulsion, the property of double-layer tape has significant impact on the propulsion performance. In this paper, low temperature plasma was used to treat the surface of polyethylene terephthalate (PET) to improv...

(This article belongs to the Special Issue Dynamics and Processes at Laser-Irradiated Surfaces—A Themed Issue in Honor of the 70th Birthday of Professor Jürgen Reif)
  • Article
  • Open Access
11 Citations
4,052 Views
17 Pages

29 June 2023

Silicon carbide wafer serves as an ideal substrate material for manufacturing semiconductor devices, holding immense potential for the future. However, its ultra-hardness and remarkable chemical inertness pose significant challenges for the surface p...

  • Article
  • Open Access
23 Citations
4,284 Views
15 Pages

Electrocatalytic water splitting is a crucial area in sustainable energy development, and the development of highly efficient bifunctional catalysts that exhibit activity toward both hydrogen evolution reaction (HER) and oxygen evolution reaction (OE...

(This article belongs to the Collection Green Energy and Environmental Materials)
  • Article
  • Open Access
9 Citations
3,405 Views
13 Pages

Micro-Raman Characterization of Structural Features of High-k Stack Layer of SOI Nanowire Chip, Designed to Detect Circular RNA Associated with the Development of Glioma

  • Yuri D. Ivanov,
  • Kristina A. Malsagova,
  • Vladimir P. Popov,
  • Igor N. Kupriyanov and ,
  • Tatyana O. Pleshakova,
  • Rafael A. Galiullin,
  • Vadim S. Ziborov,
  • Alexander Yu. Dolgoborodov,
  • Oleg F. Petrov and
  • Alexander I. Archakov
  • + 15 authors+ 10 authors

18 June 2021

The application of micro-Raman spectroscopy was used for characterization of structural features of the high-k stack (h-k) layer of “silicon-on-insulator” (SOI) nanowire (NW) chip (h-k-SOI-NW chip), including Al2O3 and HfO2 in various combinations af...

(This article belongs to the Section Bioorganic Chemistry)
  • Article
  • Open Access
12 Citations
3,111 Views
9 Pages

22 June 2022

Superhydrophilicity performs well in anti-fog and self-cleaning applications. In this study, polycarbonate substrate was used as the modification object because of the low surface energy characteristics of plastics. Procedures that employ plasma bomb...

  • Article
  • Open Access
19 Citations
6,263 Views
14 Pages

26 January 2023

Oxygen (O2) and argon (Ar) plasma give a significant improvement in the wettability of PLA films. This study investigates the effectiveness of plasma activation with a mixture of these two gases. The study includes contact angle measurements with wat...

(This article belongs to the Special Issue Toward Sustainability through Bio-Based Materials at the Interfaces with Living Systems)
  • Article
  • Open Access
26 Citations
9,008 Views
14 Pages

Yttrium Oxyfluoride Coatings Deposited by Suspension Plasma Spraying Using Coaxial Feeding

  • Jaehoo Lee,
  • Seungjun Lee,
  • Heung Nam Han,
  • Woongsik Kim and
  • Nong-Moon Hwang

The recently discovered yttrium oxyfluoride (YOF) coating has been found to be a highly promising plasma-resistant material which can be coated onto the inner wall of the dry etching chambers used in the manufacturing of the three-dimensional stackin...

(This article belongs to the Special Issue Plasma Surface Engineering)
  • Article
  • Open Access
1 Citations
1,157 Views
17 Pages

p-GaN Layer Etch Engineering for Defect Reduction in 200 mm Enhanced-Mode AlGaN/GaN HEMT Processing

  • Pauline Gaillard,
  • Sébastien Avertin,
  • Julien Drieu La Rochelle,
  • Mohammed Zeghouane and ,
  • Hyon-Ju Chauveau,
  • Giovanni Giorgino,
  • Aurore Constant and
  • Ferdinando Iucolano
  • + 3 authors+ 0 author

Gate definition is a major challenge in p-GaN gate AlGaN/GaN HEMT structures because of the high selectivity and low plasma damage required during the etching process. In this work, self-terminated etching, developed to limit surface damage and loss...

(This article belongs to the Section Semiconductor Devices)
  • Article
  • Open Access
7 Citations
3,439 Views
15 Pages

Chemistry-Induced Effects on Cell Behavior upon Plasma Treatment of pNIPAAM

  • Veronica Satulu,
  • Valentina Dinca,
  • Mihaela Bacalum,
  • Cosmin Mustaciosu and ,
  • Bogdana Mitu and
  • Gheorghe Dinescu
  • + 1 author+ 0 author

8 March 2022

In the field of bioengineering, depending on the required application, the attachment of various biological entities to the biomaterial is either favored or needs to be prevented. Therefore, different surfaces modification strategies were developed i...

(This article belongs to the Special Issue Plasma Processing of Polymers)
  • Article
  • Open Access
6 Citations
4,767 Views
11 Pages

Improvement of Yttrium Oxyfluoride Coating with Modified Precursor Solution for Laser-Induced Hydrothermal Synthesis

  • Jaeho Park,
  • Kyungwoo Lee,
  • Jaehong Lee,
  • Hae Won Hwang and ,
  • Goeen Jeong,
  • Kyung Yeun Kim,
  • Yu-Chan Kim,
  • Myoung-Ryul Ok,
  • Hyung-Seop Han and
  • Hojeong Jeon
  • + 6 authors+ 1 author

In the semiconductor manufacturing process, the inner walls of the equipment are coated with yttrium-based oxides for etch resistance against plasma exposure. Yttrium oxyfluoride (YOF) particle synthesis and coating methods have been actively studied...

  • Article
  • Open Access
5 Citations
4,485 Views
12 Pages

16 April 2025

This study introduces an enhancement-mode AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistor (MIS-HEMT) featuring a self-aligned p-GaN gate structure, fabricated using a gate-first process. The key innovation of this work lies...

(This article belongs to the Section D1: Semiconductor Devices)
  • Article
  • Open Access
14 Citations
5,738 Views
13 Pages

Black-Si as a Photoelectrode

  • Denver P. Linklater,
  • Fatima Haydous,
  • Cheng Xi,
  • Daniele Pergolesi and ,
  • Jingwen Hu,
  • Elena P. Ivanova,
  • Saulius Juodkazis,
  • Thomas Lippert and
  • Jurga Juodkazytė
  • + 4 authors+ 0 author

The fabrication and characterization of photoanodes based on black-Si (b-Si) are presented using a photoelectrochemical cell in NaOH solution. B-Si was fabricated by maskless dry plasma etching and was conformally coated by tens-of-nm of TiO2 using a...

(This article belongs to the Special Issue Design of Nanocatalysts and Electrodes: Application to Fuel Cell and Water Electrolysis)
  • Article
  • Open Access
6 Citations
6,703 Views
8 Pages

Surface Structuring of Diamond-Like Carbon Films by Chemical Etching of Zinc Inclusions

  • Ruriko Hatada,
  • Stefan Flege,
  • Berthold Rimmler,
  • Christian Dietz and ,
  • Wolfgang Ensinger and
  • Koumei Baba
  • + 1 author+ 0 author

18 February 2019

A diamond-like carbon (DLC) film with a nanostructured surface can be produced in a two-step process. At first, a metal-containing DLC film is deposited. Here, the combination of plasma source ion implantation using a hydrocarbon gas and magnetron sp...

  • Article
  • Open Access
1 Citations
3,692 Views
12 Pages

Plasma Dielectric Etching with C4H2F6 Isomers of Low Global-Warming Potential

  • Minsu Choi,
  • Youngseok Lee,
  • Chulhee Cho,
  • Wonnyoung Jeong and ,
  • Inho Seong,
  • Jami Md Ehsanul Haque,
  • Byeongyeop Choi,
  • Seonghyun Seo,
  • Sijun Kim and
  • Geun Young Yeom
  • + 6 authors+ 1 author

This paper presents the observed changes when replacing the widely used CHF3 gas in semiconductor processing with two isomeric gases, C4H2F6-iso and C4H2F6-Z. This study investigates the etching process results of SiO2 and Si3N4 by varying the ratios...

(This article belongs to the Topic Advanced Manufacturing and Surface Technology)
  • Article
  • Open Access
5 Citations
5,254 Views
15 Pages

Optical Study and Experimental Realization of Nanostructured Back Reflectors with Reduced Parasitic Losses for Silicon Thin Film Solar Cells

  • Zeyu Li,
  • Rusli E,
  • Chenjin Lu,
  • Ari Bimo Prakoso and ,
  • Martin Foldyna,
  • Rasha Khoury,
  • Pavel Bulkin,
  • Junkang Wang,
  • Wanghua Chen and
  • Pere I Roca Cabarrocas
  • + 6 authors+ 1 author

18 August 2018

We study light trapping and parasitic losses in hydrogenated amorphous silicon thin film solar cells fabricated by plasma-enhanced chemical vapor deposition on nanostructured back reflectors. The back reflectors are patterned using polystyrene assist...

(This article belongs to the Special Issue Design and Development of Nanostructured Thin Films)
  • Article
  • Open Access
23 Citations
12,078 Views
8 Pages

A Study of Trimethylsilane (3MS) and Tetramethylsilane (4MS) Based α-SiCN:H/α-SiCO:H Diffusion Barrier Films

  • Sheng-Wen Chen,
  • Yu-Sheng Wang,
  • Shao-Yu Hu,
  • Wen-Hsi Lee and ,
  • Chieh-Cheng Chi and
  • Ying-Lang Wang
  • + 1 author+ 0 author

2 March 2012

Amorphous nitrogen-doped silicon carbide (α-SiCN:H) films have been used as a Cu penetration diffusion barrier and interconnect etch stop layer in the below 90-nanometer ultra-large scale integration (ULSI) manufacturing technology. In this study, th...

  • Feature Paper
  • Article
  • Open Access
24 Citations
3,881 Views
18 Pages

Plasma-Etched Vertically Aligned CNTs with Enhanced Antibacterial Power

  • Emily Schifano,
  • Gianluca Cavoto,
  • Francesco Pandolfi,
  • Giorgio Pettinari and ,
  • Alice Apponi,
  • Alessandro Ruocco,
  • Daniela Uccelletti and
  • Ilaria Rago
  • + 3 authors+ 0 author

16 March 2023

The emergence of multidrug-resistant bacteria represents a growing threat to public health, and it calls for the development of alternative antibacterial approaches not based on antibiotics. Here, we propose vertically aligned carbon nanotubes (VA-CN...

(This article belongs to the Special Issue Carbon-Based Nanocomposites for Energy, Environmental, and Biomedical Applications)
  • Article
  • Open Access
5 Citations
3,711 Views
11 Pages

Pd/Alumina Catalysts for Beneficial Transformation of Harmful Freon R-22

  • Monika Radlik,
  • Wojciech Juszczyk,
  • Erhard Kemnitz and
  • Zbigniew Karpiński

28 September 2021

Chlorodifluoromethane (R-22), the most abundant freon in the atmosphere, was subjected to successful hydrodechlorination in the presence of palladium supported on γ-alumina, at a relatively low reaction temperature (180 °C). The combination of cataly...

(This article belongs to the Section Catalytic Materials)
  • Article
  • Open Access
66 Citations
7,540 Views
15 Pages

Growth and Strain Modulation of GeSn Alloys for Photonic and Electronic Applications

  • Zhenzhen Kong,
  • Guilei Wang,
  • Renrong Liang,
  • Jiale Su and ,
  • Meng Xun,
  • Yuanhao Miao,
  • Shihai Gu,
  • Junjie Li,
  • Kaihua Cao and
  • Henry H. Radamson
  • + 10 authors+ 5 authors

16 March 2022

GeSn materials have attracted considerable attention for their tunable band structures and high carrier mobilities, which serve well for future photonic and electronic applications. This research presents a novel method to incorporate Sn content as h...

(This article belongs to the Special Issue Silicon-Based Nanostructures: Fabrication and Characterization)
  • Article
  • Open Access
1,697 Views
10 Pages

Application of Graphene in Acoustoelectronics

  • Dmitry Roshchupkin,
  • Oleg Kononenko,
  • Viktor Matveev,
  • Kirill Pundikov and
  • Evgenii Emelin

28 October 2024

An interdigital transducer structure was fabricated from multilayer graphene on the surface of the YZ-cut of a LiNbO3 ferroelectric crystal. The multilayer graphene was prepared by CVD method and transferred onto the surface of the LiNbO3 substrate....

(This article belongs to the Special Issue Graphene and Other 2D Layer-Based Nanomaterials for Energy and Sensing Applications)
  • Article
  • Open Access
6 Citations
6,814 Views
13 Pages

The Study of Reactive Ion Etching of Heavily Doped Polysilicon Based on HBr/O2/He Plasmas for Thermopile Devices

  • Na Zhou,
  • Junjie Li,
  • Haiyang Mao,
  • Hao Liu and ,
  • Jinbiao Liu,
  • Jianfeng Gao,
  • Jinjuan Xiang,
  • Yanpeng Hu,
  • Meng Shi and
  • Wenwu Wang
  • + 9 authors+ 4 authors

25 September 2020

Heavily doped polysilicon layers have been widely used in the fabrication of microelectromechanical systems (MEMS). However, the investigation of high selectivity, anisotropy, and excellent uniformity of heavily doped polysilicon etching is limited....

  • Article
  • Open Access
48 Citations
9,046 Views
9 Pages

Investigations of Sidewall Passivation Technology on the Optical Performance for Smaller Size GaN-Based Micro-LEDs

  • Junchi Yu,
  • Tao Tao,
  • Bin Liu,
  • Feifan Xu and ,
  • Yao Zheng,
  • Xuan Wang,
  • Yimeng Sang,
  • Yu Yan,
  • Zili Xie and
  • Rong Zhang
  • + 10 authors+ 5 authors

10 April 2021

Micro-light emitting diodes (Micro-LEDs) based on III-nitride semiconductors have become a research hotspot in the field of high-resolution display due to its unique advantages. However, the edge effect caused by inductively coupled plasma (ICP) dry...

(This article belongs to the Special Issue Nitride Compound Light Emitting Diodes)
  • Feature Paper
  • Article
  • Open Access
9 Citations
4,624 Views
13 Pages

25 December 2020

Graphene nanoribbons are a greatly intriguing form of nanomaterials owing to their unique properties that overcome the limitations associated with a zero bandgap of two-dimensional graphene at room temperature. Thus, the fabrication of graphene nanor...

  • Article
  • Open Access
4 Citations
1,920 Views
37 Pages

Surface Morphology and Electrochemical Behavior of Microstructured Cu Electrodes in All-Solid-State Sodium Batteries

  • Tomás Prior,
  • Joana Figueira,
  • Ângela Freitas,
  • David Carvalho and ,
  • Beatriz Moura Gomes,
  • Manuela C. Baptista,
  • Hugo Lebre,
  • Rodrigo Martins,
  • Luís Pereira and
  • M. Helena Braga
  • + 6 authors+ 1 author

25 August 2025

The integration of microstructured current collectors offers a potential pathway to enhance interface properties in solid-state battery architectures. In this work, we investigate the influence of surface morphology on the electrochemical performance...

(This article belongs to the Section Cross-Field Chemistry)
  • Article
  • Open Access
26 Citations
12,462 Views
19 Pages

Development of Polysulfone Hollow Fiber Porous Supports for High Flux Composite Membranes: Air Plasma and Piranha Etching

  • Ilya Borisov,
  • Anna Ovcharova,
  • Danila Bakhtin,
  • Stepan Bazhenov and ,
  • Alexey Volkov,
  • Rustem Ibragimov,
  • Rustem Gallyamov,
  • Galina Bondarenko,
  • Rais Mozhchil and
  • Vladimir Volkov
  • + 6 authors+ 1 author

13 February 2017

For the development of high efficiency porous supports for composite membrane preparation, polysulfone (PSf) hollow fiber membranes (outer diameter 1.57 mm, inner diameter 1.12 mm) were modified by air plasma using the low temperature plasma treatmen...

  • Article
  • Open Access
1,651 Views
15 Pages

26 August 2025

The study evaluates the efficacy of an image-guided CAP treatment method with a plasma device capable of rapid biofilm removal from chicken tissue. The plasma treatment operating configuration includes a gas mixture of Argon and H2O at a flowrate of...

  • Article
  • Open Access
22 Citations
4,438 Views
8 Pages

Enhanced Light Extraction from Organic Light-Emitting Diodes with Micro-Nano Hybrid Structure

  • Eun-Jeong Bae,
  • Shin-Woo Kang,
  • Geun-Su Choi,
  • Eun-Bi Jang and ,
  • Dong-Hyun Baek,
  • Byeong-Kwon Ju and
  • Young-Wook Park
  • + 2 authors+ 0 author

8 April 2022

In this study, an external light extraction layer with a micro-nano hybrid structure was applied to improve the external light extraction efficiency of organic light-emitting diodes (OLEDs). A reactive ion-etching (RIE) process, using O2 and CHF3 pla...

(This article belongs to the Special Issue Multi-Functional Materials and Applications and Selected Papers from ICMMA2021)
  • Article
  • Open Access
256 Views
27 Pages

9 October 2026

Inductively coupled plasmas (ICPs) are widely used in oxide etching because they produce high-density plasmas at low pressure. In fluorocarbon-based ICP etching, the densities and spatial distributions of CxFy, CFx radicals, F atoms, and ions are imp...

(This article belongs to the Special Issue Plasma Technology and Application)
  • Article
  • Open Access
26 Citations
6,934 Views
18 Pages

Development of Virtual Metrology Using Plasma Information Variables to Predict Si Etch Profile Processed by SF6/O2/Ar Capacitively Coupled Plasma

  • Ji-Won Kwon,
  • Sangwon Ryu,
  • Jihoon Park,
  • Haneul Lee and ,
  • Yunchang Jang,
  • Seolhye Park and
  • Gon-Ho Kim
  • + 2 authors+ 0 author

1 June 2021

In the semiconductor etch process, as the critical dimension (CD) decreases and the difficulty of the process control increases, in-situ and real-time etch profile monitoring becomes important. It leads to the development of virtual metrology (VM) te...

(This article belongs to the Special Issue Etching Kinetics and Mechanisms of Thin Films)
  • Article
  • Open Access
10 Citations
10,377 Views
14 Pages

Low-Temperature Deposition of High-Quality SiO2 Films with a Sloped Sidewall Profile for Vertical Step Coverage

  • Congcong Liang,
  • Yuan Zhong,
  • Qing Zhong,
  • Jinjin Li and ,
  • Wenhui Cao,
  • Xueshen Wang,
  • Shijian Wang,
  • Xiaolong Xu,
  • Jian Wang and
  • Yue Cao
  • + 5 authors+ 0 author

27 September 2022

SiO2 is one of the most widely used dielectric materials in optical and electronic devices. The Josephson voltage standard (JVS) chip fabrication process has rigorous requirements for the deposition temperature and step-coverage profiles of the SiO2...

  • Article
  • Open Access
10 Citations
5,592 Views
10 Pages

10 May 2022

We present a process flow for wafer-scale fabrication of a surface phase grating with sub-micron feature sizes from a single semiconductor material. We demonstrate this technique using a 110-oriented GaP semiconductor wafer with second-order nonlinea...

(This article belongs to the Special Issue Recent Advances in Nonlinear Optical Crystals)
  • Article
  • Open Access
7 Citations
5,452 Views
14 Pages

21 March 2019

Responsive polymer-based sensors have attracted considerable attention due to their ability to detect the presence of analytes and convert the detected signal into a physical and/or chemical change. High responsiveness, fast response speed, good line...

(This article belongs to the Special Issue Functional Polymers in Sensors and Actuators: Fabrication and Analysis)
  • Article
  • Open Access
3 Citations
3,108 Views
11 Pages

Stability of Wafer-Scale Thin Films of Vertically Aligned Hexagonal BN Nanosheets Exposed to High-Energy Ions and Reactive Atomic Oxygen

  • Shiyong Huang,
  • Zhi Kai Ng,
  • Hongling Li,
  • Apoorva Chaturvedi and ,
  • Jian Wei Mark Lim,
  • Roland Yingjie Tay,
  • Edwin Hang Tong Teo,
  • Shuyan Xu,
  • Kostya (Ken) Ostrikov and
  • Siu Hon Tsang
  • + 5 authors+ 0 author

2 November 2022

Stability of advanced functional materials subjected to extreme conditions involving ion bombardment, radiation, or reactive chemicals is crucial for diverse applications. Here we demonstrate the excellent stability of wafer-scale thin films of verti...

(This article belongs to the Collection The Fourth State of Engineering: Nanoengineered Materials and Coatings Facilitated by Plasma Techniques)
  • Article
  • Open Access
2 Citations
1,551 Views
11 Pages

Dry-Transferred MoS2 Films on PET with Plasma Patterning for Full-Bridge Strain-Gauge Sensors

  • Jinkyeong Kim,
  • Minjae Lee,
  • Wooseung Lee,
  • Minseok Lee and ,
  • Chang-Mo Kang,
  • Daewoong Jung,
  • Hyunwoo Son,
  • Eunyoung Kim,
  • Sangwoo Chae and
  • Joonhyub Kim
  • + 5 authors+ 0 author

15 January 2026

In this study, a high-performance MoS2-based strain-gauge pressure was sensor fabricated entirely below 80 °C, enabling direct integration onto flexible polyethylene terephthalate (PET) substrates. The sensor comprised a three-layer MoS2 channel...

(This article belongs to the Topic Modeling, Fabrication, and Characterization of Semiconductor Materials and Devices, 2nd Edition)
  • Article
  • Open Access
10 Citations
7,442 Views
8 Pages

This study proposes a long period fiber grating (LPFG) with a zinc oxide (ZnO) nanoparticle layer for use as a carbon dioxide (CO2) gas sensor. Inductively coupled plasma (ICP) etching, corona treatment, and electrostatic spraying were used to fabric...

(This article belongs to the Special Issue Innovation and Inventions of Electro-Optical Materials and Devices and their Application)

of 5