Skip to Content

184 Results Found

  • Article
  • Open Access
10 Citations
3,224 Views
20 Pages

Femtosecond Laser-Ablated Copper Surface as a Substrate for a MoS2-Based Hydrogen Evolution Reaction Electrocatalyst

  • Ramūnas Levinas,
  • Asta Grigucevičienė,
  • Tadas Kubilius,
  • Aidas Matijošius and ,
  • Loreta Tamašauskaitė-Tamašiūnaitė,
  • Henrikas Cesiulis and
  • Eugenijus Norkus
  • + 2 authors+ 0 author

31 May 2022

One of the methods to improve the performance of a heterogeneous electrocatalyst is the dispersion of a catalytic material on a suitable substrate. In this study, femtosecond laser ablation was used to prepare very rough but also ordered copper surfa...

(This article belongs to the Special Issue Feature Paper in Section Catalytic Materials)
  • Article
  • Open Access
22 Citations
5,647 Views
22 Pages

7 May 2020

Nowadays, the comfort of drivers and passengers is drawing more and more attention. The interaction between vehicles and the asphalt road can cause coupled vibration and reduce the comfort of passengers. Therefore, the research on human–vehicle...

(This article belongs to the Special Issue Computational Methods in Vibration Problems and Wave Mechanics)
  • Article
  • Open Access
45 Citations
5,347 Views
16 Pages

Surface Properties of Beech Wood after CO2 Laser Engraving

  • Jozef Kúdela,
  • Ivan Kubovský and
  • Michal Andrejko

16 January 2020

The paper deals with the properties of a beech wood surface treated by CO2 laser engraving. The studied concerns were the discoloration, changes to morphology assessed through roughness and waviness parameters, and surface wetting with standard liqui...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
18 Citations
5,109 Views
22 Pages

Three-Dimensional Combined Finite-Discrete Element Modeling of Shear Fracture Process in Direct Shearing of Rough Concrete–Rock Joints

  • Gyeongjo Min,
  • Daisuke Fukuda,
  • Sewook Oh,
  • Gyeonggyu Kim and ,
  • Younghun Ko,
  • Hongyuan Liu,
  • Moonkyung Chung and
  • Sangho Cho
  • + 3 authors+ 0 author

12 November 2020

A three-dimensional combined finite-discrete element element method (FDEM), parallelized by a general-purpose graphic-processing-unit (GPGPU), was applied to identify the fracture process of rough concrete–rock joints under direct shearing. The...

(This article belongs to the Special Issue Fracture Mechanics – Theory, Modeling and Applications)
  • Article
  • Open Access
14 Citations
4,806 Views
11 Pages

Modeling of Drag Finishing—Influence of Abrasive Media Shape

  • Irati Malkorra,
  • Hanène Souli,
  • Ferdinando Salvatore,
  • Pedro Arrazola and ,
  • Joel Rech,
  • Mehmet Cici,
  • Aude Mathis and
  • Jason Rolet
  • + 3 authors+ 0 author

Drag finishing is a widely used superfinishing technique in the industry to polish parts under the action of abrasive media combined with an active surrounding liquid. However, the understanding of this process is not complete. It is known that pyram...

(This article belongs to the Special Issue Surface Integrity in Machining and Post-processing)
  • Article
  • Open Access
138 Citations
7,691 Views
15 Pages

Influence of Print Orientation on Surface Roughness in Fused Deposition Modeling (FDM) Processes

  • Irene Buj-Corral,
  • Alejandro Domínguez-Fernández and
  • Ramón Durán-Llucià

21 November 2019

In the present paper, we address the influence of print orientation angle on surface roughness obtained in lateral walls in fused deposition modelling (FDM) processes. A geometrical model is defined that considers the shape of the filaments after dep...

(This article belongs to the Special Issue Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019))
  • Article
  • Open Access
336 Views
20 Pages

23 September 2026

River terraces and alluvial fans preserve important records of landscape evolution, yet establishing their relative chronology is often difficult where suitable materials for numerical dating are scarce. This study explores whether geomorphic-surface...

(This article belongs to the Special Issue Earthquake Fault Traces, Surface Deformation, and Secondary Hazards Revealed by High-Resolution Remote Sensing Data)
  • Article
  • Open Access
15 Citations
4,408 Views
25 Pages

On the Effect of Electron Beam Melted Ti6Al4V Part Orientations during Milling

  • Abdulmajeed Dabwan,
  • Saqib Anwar,
  • Ali M. Al-Samhan and
  • Mustafa M. Nasr

1 September 2020

The machining of the electron beam melting (EBM) produced parts is a challenging task because, upon machining, different part orientations (EBM layers’ orientations) produce different surface quality even when the same machining parameters are employ...

(This article belongs to the Special Issue Electron Beam Treatment Technology in Metals)
  • Article
  • Open Access
7 Citations
3,884 Views
17 Pages

GPU-Based Soil Parameter Parallel Inversion for PolSAR Data

  • Qiang Yin,
  • You Wu,
  • Fan Zhang and
  • Yongsheng Zhou

28 January 2020

With the development of polarimetric synthetic aperture radar (PolSAR), quantitative parameter inversion has been seen great progress, especially in the field of soil parameter inversion, which has achieved good results for applications. However, Pol...

(This article belongs to the Special Issue GPU Computing for Geoscience and Remote Sensing)
  • Article
  • Open Access
3 Citations
3,404 Views
19 Pages

30 June 2022

Magnetic field assisted finishing (MFAF) technology has been widely used in industries such as aerospace, biomedical, and the optical field for both external and internal surface finishing due to its high conformability to complex surfaces and nanome...

(This article belongs to the Special Issue Frontiers in Ultra-Precision Machining, Volume II)
  • Article
  • Open Access
22 Citations
4,127 Views
14 Pages

X-ray Computed Tomography Procedures to Quantitatively Characterize the Morphological Features of Triply Periodic Minimal Surface Structures

  • Sergei Evsevleev,
  • Tatiana Mishurova,
  • Dmitriy Khrapov,
  • Aleksandra Paveleva and ,
  • Dietmar Meinel,
  • Roman Surmenev,
  • Maria Surmeneva,
  • Andrey Koptyug and
  • Giovanni Bruno
  • + 4 authors+ 0 author

1 June 2021

Additively manufactured (AM) metallic sheet-based Triply Periodic Minimal Surface Structures (TPMSS) meet several requirements in both bio-medical and engineering fields: Tunable mechanical properties, low sensitivity to manufacturing defects, mechan...

(This article belongs to the Special Issue Micro Non-destructive Testing and Evaluation)
  • Article
  • Open Access
22 Citations
6,903 Views
33 Pages

A Modified Multi-Source Parallel Model for Estimating Urban Surface Evapotranspiration Based on ASTER Thermal Infrared Data

  • Yu Zhang,
  • Long Li,
  • Longqian Chen,
  • Zhihong Liao and ,
  • Yuchen Wang,
  • Bingyi Wang and
  • Xiaoyan Yang
  • + 2 authors+ 0 author

7 October 2017

To date, little attention has been given to remote sensing-based algorithms for inferring urban surface evapotranspiration. A multi-source parallel model based on ASTER data was one of the first examples, but its accuracy can be improved. We therefor...

(This article belongs to the Section Remote Sensing in Agriculture and Vegetation)
  • Article
  • Open Access
7 Citations
1,933 Views
30 Pages

Response Surface Methodology-Based Optimization of AZ91 Composites Reinforced with Short Carbon Fibers for Enhanced Mechanical and Wear Properties

  • Sabbah Ataya,
  • Nashmi H. Alrasheedi,
  • Mohamed M. El-Sayed Seleman,
  • Rana G. Eid and ,
  • Ashraf Bakkar,
  • Ahmed Ataya and
  • Ramy A. Fouad
  • + 2 authors+ 0 author

28 May 2025

This study aims to enhance the mechanical and wear properties of AZ91 magnesium alloy by reinforcing it with 23 vol.% short carbon fibers (SCFs) aligned in normal (AZ91C-N) and parallel (AZ91C-P) orientations via squeeze-casting. The microstructure a...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
20 Citations
3,169 Views
17 Pages

26 November 2023

This work appraises the influence of CO2 laser irradiation on mass loss, morphology, chemical changes and discolouration of spruce wood surfaces. The amount of energy applied to the surface was expressed as the total irradiation dose, which was demon...

(This article belongs to the Special Issue Advances in Surface Modification and Coatings of Wood and Wood Composites)
  • Article
  • Open Access
5 Citations
4,347 Views
16 Pages

9 February 2024

A full understanding of the fluid flow and heat transfer behaviors within a single fracture is important for geothermal heat extraction. In this study, models of single fractures with varying aperture and inner surface roughness (characterized by fra...

(This article belongs to the Special Issue Green Manufacturing and Low-Carbon Control of Mechanical and Electrical Products)
  • Article
  • Open Access
7 Citations
3,442 Views
12 Pages

Spatial and Temporal Changes in Infiltration and Aggregate Stability: A Case Study of a Subhumid Irrigated Cropland

  • Gergely Jakab,
  • Endre Dobos,
  • Balázs Madarász,
  • Zoltán Szalai and
  • Judit Alexandra Szabó

26 April 2019

Climate change is increasing the occurrence of extreme precipitation events and causing irregular precipitation patterns. This occurs in parallel with the degradation of crop fields, and triggers the occurrence of pluvial floods and droughts on the s...

(This article belongs to the Section Hydrology)
  • Article
  • Open Access
14 Citations
3,856 Views
16 Pages

Blood Coagulation on Titanium Dioxide Films with Various Crystal Structures on Titanium Implant Surfaces

  • Her-Hsiung Huang,
  • Zhi-Hwa Chen,
  • Diem Thuy Nguyen,
  • Chuan-Ming Tseng and ,
  • Chiang-Sang Chen and
  • Jean-Heng Chang
  • + 1 author+ 0 author

23 August 2022

Background: Titanium (Ti) is one of the most popular implant materials, and its surface titanium dioxide (TiO2) provides good biocompatibility. The coagulation of blood on Ti implants plays a key role in wound healing and cell growth at the implant s...

(This article belongs to the Section Cell Methods)
  • Article
  • Open Access
6 Citations
2,284 Views
15 Pages

7 July 2022

This paper deals with the problem of the influence of surface topography on the results of thermal diffusivity measurements when determined using the instantaneous surface heat source method, also called the pulse method. The analysis was based on nu...

(This article belongs to the Special Issue Fabrication, Characterization, and Application of Coatings and Thin Films)
  • Feature Paper
  • Article
  • Open Access
7 Citations
2,813 Views
11 Pages

16 June 2021

This paper discusses the fabrication and characterization of electrospun nanofiber scaffolds made of polystyrene (PS). The scaffolds were characterized in terms of their basis material molecular weight, fiber diameter distribution, contact angles, co...

(This article belongs to the Section Surface Sciences and Technology)
  • Article
  • Open Access
20 Citations
2,378 Views
15 Pages

Impact of Magnetic Field Direction on Performance and Structure of Ni-Co-SiC Coatings Fabricated via Magnetic-Field-Induced Electrodeposition

  • Chunyang Ma,
  • Hongxin He,
  • Hongbin Zhang,
  • Zhiping Li and ,
  • Lixin Wei and
  • Fafeng Xia
  • + 1 author+ 0 author

This study reports the synthesis of Ni-Co-SiC coatings onto Q235A steel substrates through magnetic-field-induced electrodeposition to improve the surface performances of the machine parts. The microstructure, topology, roughness, corrosion, and wear...

  • Article
  • Open Access
9 Citations
2,822 Views
22 Pages

Simulation and Experimental Study of Non-Resonant Vibration-Assisted Lapping of SiCp/Al

  • Huibo Zhao,
  • Yan Gu,
  • Yuan Xi,
  • Xingbao Fu and ,
  • Yinghuan Gao,
  • Jiali Wang,
  • Lue Xie and
  • Guangyu Liang
  • + 3 authors+ 0 author

9 January 2024

SiCp/Al is a difficult-to-machine material that makes it easy to produce surface defects during machining, and researchers focus on reducing the surface defects. Vibration-assisted machining technology is considered an effective method to reduce surf...

(This article belongs to the Special Issue Advanced Micro- and Nano-Manufacturing Technologies)
  • Feature Paper
  • Article
  • Open Access
2 Citations
1,505 Views
17 Pages

Mineral Deposition on the Rough Walls of a Fracture

  • Nathann Teixeira Rodrigues,
  • Ismael S. S. Carrasco,
  • Vaughan R. Voller and
  • Fábio D. A. Aarão Reis

28 November 2024

Modeling carbonate growth in fractures and pores is important for understanding carbon sequestration in the environment or when supersaturated solutions are injected into rocks. Here, we study the simple but nontrivial problem of calcite growth on fr...

(This article belongs to the Special Issue Mineral Dissolution and Precipitation in Geologic Porous Media)
  • Article
  • Open Access
6 Citations
4,206 Views
35 Pages

18 November 2024

With a view to improve measurements, this paper presents a statistical approach for characterizing the behaviour of roughness parameters based on measurements performed on ground surface topographies (grit #080/#120). A S neoxTM (Sensofar®, Terra...

(This article belongs to the Special Issue Advances in Optical 3D Metrology)
  • Article
  • Open Access
31 Citations
7,111 Views
15 Pages

Splat morphology is an important factor that influences the mechanical properties and durability of thermal barrier coatings (TBCs). In this study, yttria-stabilized zirconia (YSZ) coatings with different lamellar interface morphologies were deposite...

(This article belongs to the Special Issue Coatings for Harsh Environments)
  • Article
  • Open Access
2,408 Views
16 Pages

Characterization of Laser-Ablated Bound Metal Deposition (laBMD)

  • Alexander Watson,
  • Masoud Rais-Rohani,
  • John Belding,
  • Jasper McGill and
  • Brett D. Ellis

Additive manufacturing of metals is limited by a fundamental tradeoff between deposition rates and manufacturability of fine-scale features. To overcome this problem, a laser-ablated bound metal deposition (laBMD) process is demonstrated in which 3D-...

  • Article
  • Open Access
16 Citations
4,365 Views
24 Pages

Experimental Evaluation of Surface Roughness, Burr Formation, and Tool Wear during Micro-Milling of Titanium Grade 9 (Ti-3Al-2.5V) Using Statistical Evaluation Methods

  • Muhammad Ayyaz Khan,
  • Muhammad Ali Khan,
  • Shahid Aziz,
  • Muhammad Iftikhar Faraz and ,
  • Abdul Malik Tahir,
  • Syed Husain Imran Jaffery and
  • Dong-Won Jung
  • + 2 authors+ 0 author

30 November 2023

Titanium grade 9 (Ti-3Al-2.5V) stands out as a preferred material in various industrial applications because of its suitable properties. Its applications span diverse sectors, including precision manufacturing, where it is utilized to produce honeyco...

(This article belongs to the Section Aerospace Science and Engineering)
  • Article
  • Open Access
3 Citations
1,474 Views
23 Pages

11 February 2025

Advancements in Industry 4.0 and smart manufacturing have increased the demand for precise and intricate part surface geometries, making the analysis of surface morphology essential for ensuring assembly precision and product quality. This study pres...

(This article belongs to the Special Issue Advanced Manufacturing and Assembly Technologies for Aerospace Production Systems)
  • Article
  • Open Access
11 Citations
3,652 Views
20 Pages

CNC Turning of an Additively Manufactured Complex Profile Ti6Al4V Component Considering the Effect of Layer Orientations

  • Abdulmajeed Dabwan,
  • Saqib Anwar,
  • Ali M. Al-Samhan,
  • Khaled N. Alqahtani and ,
  • Mustafa M. Nasr,
  • Husam Kaid and
  • Wadea Ameen
  • + 2 authors+ 0 author

29 March 2023

Electron beam melting (EBM) is one example of a 3D printing technology that has shown great promise and advantages in the fabrication of medical devices such as dental and orthopedic implants. However, these products require high surface quality cont...

(This article belongs to the Special Issue Computer-Aided Manufacturing Technologies in Mechanical Field)
  • Article
  • Open Access
4 Citations
2,247 Views
27 Pages

A Novel Approach to Rockwell and Scratch Adhesion Tests for Hard Coatings Deposited onto Ti6Al4V Substrates

  • Emanuele Ghio,
  • Maria Francesca Bonilauri,
  • Giovanni Bolelli,
  • Paolo Colombi and
  • Emanuela Cerri

8 September 2025

The paper aims to investigate the failure modes induced by the Rockwell indentation test on Diamond-Like Carbon (DLC)-based and AlCrN coatings deposited on rolled and additively manufactured Ti6Al4V substrates with different surface finishes and subj...

(This article belongs to the Special Issue Additive Manufacturing and Characterization of Metallic Alloys and Composites)
  • Article
  • Open Access
275 Views
22 Pages

Well Orientation Effects on Hydraulic Fracturing in Tight Sandstone: A True Triaxial Experimental Study

  • Rui Chang,
  • Kai Xu,
  • Hao Chen,
  • Biao Feng and ,
  • Yilin Ren,
  • Wanwan Miao and
  • Wensuo Ye
  • + 2 authors+ 0 author

29 September 2026

To clarify the controlling effects of the well deviation angle and azimuth angle on the breakdown pressure, propagation morphology, and fracture-network complexity of hydraulic fractures in tight sandstone, true triaxial hydraulic fracturing physical...

(This article belongs to the Special Issue Engineering Problems in the Development of Unconventional Oil and Gas Reservoirs)
  • Article
  • Open Access
25 Citations
3,638 Views
12 Pages

Nanostructured Superhydrophobic Titanium-Based Materials: A Novel Preparation Pathway to Attain Superhydrophobicity on TC4 Alloy

  • Yuxin Wang,
  • Jiahuan Chen,
  • Yifan Yang,
  • Zihan Liu and ,
  • Hao Wang and
  • Zhen He
  • + 1 author+ 0 author

17 June 2022

This study develops the nanostructured superhydrophobic titanium-based materials using a combined preparation method of laser marking step and the subsequent anodizing step. The structural properties were determined using an X-ray diffractometer (XRD...

(This article belongs to the Special Issue The Properties of Functional Nanomaterials and Their Energy and Environmental Applications)
  • Article
  • Open Access
6 Citations
3,938 Views
20 Pages

18 March 2022

Five-axis working machines are applied in the high-precision machining of complex convex surfaces. Therefore, this study integrated a horizontal parallel three-axis motion platform and a three-axis machine tools to create a reconfigurable precision f...

(This article belongs to the Special Issue Innovative and Modern Technologies of Material Machining in Cutting and Abrasive Processes)
  • Article
  • Open Access
131 Views
26 Pages

Triple-Doped (Mg, Zn, Sr) β-Tricalcium Phosphate Ceramics: Biomimetic Synthesis, Femtosecond Laser-Induced Microstructure Formation and Biological Assessment

  • Kostadinka Sezanova,
  • Albena Daskalova,
  • Tsvetelina Paunova-Krasteva,
  • Liliya Angelova and ,
  • Dayana Borisova,
  • Shazie Yusein-Myashkova,
  • Iva Ugrinova,
  • Rumiana Gergulova and
  • Diana Rabadjieva
  • + 4 authors+ 0 author

1 November 2026

Triple-doped substitution and femtosecond laser surface microstructuring represent synergistic strategies for tailoring the physicochemical, structural, and biological properties of β-tricalcium phosphate (β-TCP) ceramics for bone tissue en...

(This article belongs to the Special Issue Advancing Tissue Engineering and Regenerative Medicine Using Next-Gen Biomaterials)
  • Article
  • Open Access
13 Citations
6,174 Views
11 Pages

Comparison between Early Loaded Single Implants with Internal Conical Connection or Implants with Transmucosal Neck Design: A Non-Randomized Controlled Trial with 1-Year Clinical, Aesthetics, and Radiographic Evaluation

  • Francesco Mattia Ceruso,
  • Irene Ieria,
  • Marco Tallarico,
  • Silvio Mario Meloni and ,
  • Aurea Immacolata Lumbau,
  • Alessandro Mastroianni,
  • Alessio Zotti and
  • Marco Gargari
  • + 3 authors+ 0 author

10 January 2022

To evaluate the implant and prosthetic of two implants with different surfaces and neck design. Enrolled patients received bone level, 12° conical connection implants (Nobel Parallel, Nobel Biocare; NOBEL group) with anodized surface (TiUnite) an...

(This article belongs to the Special Issue Dental Implants and Materials (Second Volume))
  • Article
  • Open Access
7 Citations
4,230 Views
19 Pages

Carbon Dioxide Capture in Homogeneous and Heterogeneous Surfaces of Porous Silica Glass

  • Chontira Boonfung,
  • Chaiyot Tangsathitkulchai and
  • Atichat Wongkoblap

7 October 2020

Experimental and simulation studies for carbon dioxide (CO2) adsorption on porous silica glass were performed to reveal how surface heterogeneity can affect the adsorption mechanism of CO2. In performing the simulation, the structure of porous silica...

(This article belongs to the Section Environmental and Green Processes)
  • Article
  • Open Access
2 Citations
2,002 Views
14 Pages

26 October 2024

The topography of surfaces produced by metal additive manufacturing is a challenge for optical measurement systems such as focus variation microscopes. These irregularities can lead to artifacts, such as incorrectly measured protrusions or spikes, ha...

(This article belongs to the Special Issue Optical Technologies for Measurement and Metrology)
  • Article
  • Open Access
36 Citations
2,799 Views
23 Pages

30 May 2025

Additive manufacturing (AM) is gaining widespread adoption in the manufacturing industry due to its capability to fabricate intricate and high-performance components. In parallel, the increasing emphasis on functional materials in AM has highlighted...

(This article belongs to the Special Issue Polymer Materials for Application in Additive Manufacturing)
  • Article
  • Open Access
1 Citations
2,225 Views
20 Pages

Hybrid Fabrication of Zirconia Parts with Smooth Surface Texture and Tight Tolerances

  • Laurent Spitaels,
  • Valentin Dambly,
  • Aiora Beobide Otaegi,
  • Julien Bossu and ,
  • Cathy Delmotte,
  • Gregory Martic,
  • Enrique Juste,
  • Raoul Carrus,
  • Pedro-José Arrazola and
  • François Ducobu
  • + 7 authors+ 2 authors

The conventional manufacturing chain for technical ceramics is too expensive for the production of small series or unique parts with complex designs. Hybrid machines that combine additive and subtractive processes can be an interesting solution to ov...

(This article belongs to the Special Issue Recent Progress in Hybrid Composites)
  • Article
  • Open Access
1,353 Views
21 Pages

Graded Brittle–Ductile Transition via Laser-Induced Thermal Gradient for Broaching of Z10C13 Steel

  • Guozhen Liu,
  • Zhen Meng,
  • Junqiang Zheng,
  • Weiguang Liu and ,
  • Xinghua Wu,
  • Jing Ni and
  • Haohan Zhang
  • + 2 authors+ 0 author

2 February 2026

This paper presents a breakthrough in activating the skin effect at conventional broaching speeds (1–8 m/min) by using laser defocus gradient modification to induce surface embrittlement in martensitic stainless steel Z10C13. Through controlled...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
24 Citations
4,808 Views
11 Pages

An Array of Flag-Type Triboelectric Nanogenerators for Harvesting Wind Energy

  • Zhiqiang Zhao,
  • Bin Wei,
  • Yan Wang,
  • Xili Huang and ,
  • Bo Li,
  • Fang Lin,
  • Long Ma,
  • Qianxi Zhang,
  • Yongjiu Zou and
  • Xinxiang Pan
  • + 8 authors+ 3 authors

21 February 2022

Harvesting wind energy from the ambient environment is a feasible method for powering wireless sensors and wireless transmission equipment. Triboelectric nanogenerators (TENGs) have proven to be a stable and promising technology for harvesting ambien...

(This article belongs to the Topic Electromaterials for Environment & Energy)
  • Article
  • Open Access
31 Citations
3,875 Views
14 Pages

Estimation of Drag Finishing Abrasive Effect for Cutting Edge Preparation in Broaching Tool

  • Cristian F. Pérez-Salinas,
  • Ander del Olmo and
  • L. Norberto López de Lacalle

24 July 2022

In recent years, cutting edge preparation became a topic of high interest in the manufacturing industry because of the important role it plays in the performance of the cutting tool. This paper describes the use of the drag finishing DF cutting edge...

(This article belongs to the Special Issue Composites, Alloys and Advanced Processes for Manufacturing in Aeronautics and Aerospace)
  • Article
  • Open Access
525 Views
26 Pages

22 June 2026

Femtosecond laser surface texturing offers a promising route to tailor the functionality of bio-based wood coatings, yet the interplay between coating composition and laser processing remains poorly understood. In this study, bio-based epoxy coatings...

(This article belongs to the Special Issue Laser Micro/Nano-Fabrication, 2nd Edition)
  • Feature Paper
  • Article
  • Open Access
  • Best Paper Award
65 Citations
15,349 Views
10 Pages

22 March 2019

Fog harvesting of the Namib desert beetles has inspired many researchers to design artificial fog harvesting hybrid surfaces, which commonly involve flat hydrophilic patterns on hydrophobic surfaces. However, relatively less interest has been shown i...

  • Article
  • Open Access
2 Citations
3,606 Views
13 Pages

Case–Control Study with a 6-Month Follow-Up to Compare the Effect of Nano-Hydrophilic and Moderately Rough Implant Surfaces in Association with Transcrestal Sinus Lift

  • Domenico Baldi,
  • Luigi Canullo,
  • Paolo Pesce,
  • Alessio Triestino and ,
  • Francesco Gianfreda,
  • Nicola De Angelis,
  • Valeria Pistilli,
  • Francesco Bagnasco and
  • Vito Carlo Alberto Caponio
  • + 4 authors+ 0 author

Background: Wettability of dental implant surfaces is a key factor in the osteointegration process. This study aimed to evaluate the effect of a new hydrophilic surface on implant stability in posterior maxilla rehabilitations. Materials and Methods:...

  • Article
  • Open Access
2 Citations
3,212 Views
17 Pages

31 March 2025

Multi-island cavities are common and complex features in structural parts of the aerospace, energy, and power fields. The processing is hindered by low programming efficiency and a strong dependence on the experience of process engineers. In response...

(This article belongs to the Section Material Processing Technology)
  • Article
  • Open Access
10 Citations
4,006 Views
15 Pages

Physical Properties of Fe3Si Films Coated through Facing Targets Sputtering after Microwave Plasma Treatment

  • Nattakorn Borwornpornmetee,
  • Peerasil Charoenyuenyao,
  • Rawiwan Chaleawpong,
  • Boonchoat Paosawatyanyong and ,
  • Rungrueang Phatthanakun,
  • Phongsaphak Sittimart,
  • Kazuki Aramaki,
  • Takeru Hamasaki,
  • Tsuyoshi Yoshitake and
  • Nathaporn Promros
  • + 5 authors+ 0 author

1 August 2021

Fe3Si films are deposited onto the Si(111) wafer using sputtering with parallel facing targets. Surface modification of the deposited Fe3Si film is conducted by using a microwave plasma treatment under an Ar atmosphere at different powers of 50, 100...

(This article belongs to the Special Issue Advances in Thin Film Fabrication by Magnetron Sputtering)
  • Article
  • Open Access
1,113 Views
16 Pages

18 January 2026

Interfacial adhesion between selective laser-melted (SLM) AlSi10Mg and polyimide (PI) insulating coatings is often limited by mismatched physicochemical properties. To improve adhesion, Al-rich and Si-rich microstructured surfaces were fabricated on...

(This article belongs to the Special Issue Friction, Wear and Surface Engineering of Materials)
  • Article
  • Open Access
9 Citations
2,357 Views
12 Pages

Research on the End-Milling Surface Quality of Paulownia Based on Response Surface Model in Terms of Force and Chip Morphology

  • Jinxin Wang,
  • Zhanwen Wu,
  • Feng Zhang,
  • Chaojun Song and ,
  • Wei Hu,
  • Zhaolong Zhu,
  • Xiaolei Guo and
  • Pingxiang Cao
  • + 3 authors+ 0 author

8 February 2024

To investigate the impact of different milling parameters on milling forces, chip morphology, and machined surface quality during the Paulownia milling process, we conducted experiments using cemented carbide single-tooth shank milling cutters. Addit...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
7 Citations
2,469 Views
18 Pages

31 August 2025

The present study investigates passive microdroplet generation in a T-junction microchannel using microscopic observations, microscale particle image velocimetry (Micro-PIV) visualization, and lattice Boltzmann simulations. The key flow regimes, i.e....

(This article belongs to the Special Issue Flows in Micro- and Nano-Systems)
  • Article
  • Open Access
177 Views
21 Pages

31 October 2026

This study systematically investigates the dynamic behavior of laser-induced cavitation bubbles and the micro-forming mechanism between parallel walls. The bubble is produced in the middle of the gap. Through integrated high-speed imaging, hydrophone...

of 4