- Article
This article represents and compares two control systems for a vertical takeoff and landing (VTOL) unmanned aerial vehicle (UAV): a sliding proportional–integral–derivative (PID) controller and an adaptive L1 controller. The goal is to de...
This article represents and compares two control systems for a vertical takeoff and landing (VTOL) unmanned aerial vehicle (UAV): a sliding proportional–integral–derivative (PID) controller and an adaptive L1 controller. The goal is to de...
Random variation of grid-connected wind power can cause stochastic variation of the power system operating point. This paper proposes a new scheme to design an adaptive damping controller by tracking the variation of system operating points and updat...
Maglev transportation system is become a hot topic for researchers because of the distinctive advantages, such as frictionless motion, low power consumption, less noise, and being environmentally friendly. The maglev transportation system’s performan...
A nonlinear adaptive backstepping control method was proposed to address the system parameter uncertainty problem in the position control process of an electro-hydraulic servo closed-pump control system. This control strategy fully considers the para...
This paper focuses on high performance adaptive robust position control of electro-hydraulic servo system. The main feature of the paper is the combination of adaptive robust algorithm with discrete disturbance estimation to cope with the parametric...
This paper introduces a novel adaptive control method for suspension vehicle systems in response to road disturbances. The considered model is based on an active symmetry quarter car (SQC) fractional order suspension system (FOSS). The word symmetry...
Precise force tracking and overshoot suppression are critical for manipulator dynamic contact tasks, especially in unstructured environments such as complex surface cleaning that rely on dynamic feedback from force sensors. Traditional impedance cont...
This paper presents an adaptive neural network (NN) control approach for an electro-hydraulic system. The friction and internal leakage are nonlinear uncertainties, and the states in the considered electro-hydraulic system are fully constrained. In t...
With the rapid growth of the civil aviation industry, the aircraft towing and taxiing (ATT) system has gained significant attention in the literature. Due to its nonlinear and underactuated characteristics, the path tracking and control of the ATT sy...
To address the nonlinearity and control problems of the Maglev system caused by external disturbances and internal factors of the system, this study first established a kinematic model of a single-point levitation system. Secondly, based on the nonli...
In this paper, an adaptive sliding mode speed control algorithm with an integral-operation sliding surface is proposed for a variable speed wind energy experimental system. In the control design, an estimator is designed to compensate for the uncerta...
The increasing penetration of renewable energy, such as photovoltaic generation, makes it essential to enhance power system dynamic performance through improved grid-forming control strategies. In the grid-forming control system, the virtual synchron...
Currently, the most implemented solution for driving a pumping system (PS) at variable speed is using a variable frequency drive (VFD). Because most of the VFDs have integrated only one proportional-integral (PI) frequency controller whose parameters...
This article settles a new multi-fault-tolerant control problem of an Euler–Bernoulli beam system (EBBS) in the existence of multiplicative faults, additive faults, and control-matched disturbances simultaneously, using the direct adaptive lear...
Since the piezoelectrically actuated system has nonlinear and time-varying behavior, it is difficult to establish an accurate dynamic model for a model-based sensing and control design. Here, a model-free adaptive sliding controller is proposed to im...
To enhance the move towards a sustainable society, the solar Photovoltaic (PV) industry and its applications are progressing at a rapid rate. However, the associated issues need to be addressed when connecting PV to the grid. Advanced and efficient c...
This study proposes two adaptive controllers and applies them to the vibration control of an in-wheel motor vehicle’s (electric vehicle) suspension system, in which a semi-active magnetorheological (MR) damper is installed as an actuator. As a...
An essential component of modern musculoskeletal rehabilitation systems is treadmills of various sizes, the control of which may rely either on manual adjustment of treadmill speed, fixed for the entire training session, or on automatic regulation ba...
Several phenomena in nature are subjected to the interaction of various physical parameters, which, if these latter are well known, allow us to predict the behavior of such phenomena. In most cases, these physical parameters are not exactly known, or...
The efficiency of solar water heating systems is strongly influenced by variable weather conditions, making the optimization of control strategies essential for maximizing energy performance. This study presents the development and evaluation of a ru...
To enhance the robustness of the toolface angle control in a fully rotary steerable drilling tool, a backstepping control law and a drilling fluid flow adaptive law are devised based on the dynamic model of the stable platform. The Lyapunov function...
In this study, synergetic-based adaptive control design is developed for trajectory tracking control of joint position in knee-rehabilitation system. This system is often utilized for rehabilitation of patients with lower-limb disabilities. However,...
The thrust system, an important subsystem of a tunnel boring machine (TBM), primarily provides thrust force and adjusts TBM’s attitude in real time. In the tunneling process, only controlling the thrust speed causes pressure oscillations, incre...
In this paper, an adaptive robust neural network controller (ARNNC) is synthesized for a single-rod pneumatic actuator to achieve high tracking accuracy without knowing the bounds of the parameters and disturbances. The ARNNC control framework integr...
In this paper, a novel adaptive control system (NAC) is proposed for a restricted quarter-car electrohydraulic active suspension system. The main contribution of this NAC is its explicit tackling of the trade-off between passenger comfort/road holdin...
In order to solve the problems of thermal management efficiency and temperature control accuracy in the passenger compartment of electric vehicles, the phase change thermal storage design concept and the model-free adaptive control method are applied...
In an idle light-load or a full-load condition, the change of the load mass of a suspension system is very significant. If the control parameters of conventional control methods remain unchanged, the suspension performance of the control system deter...
In the traditional iterative learning control (ILC) method, the operational time interval is conventionally fixed to facilitate a seamless learning process along the iteration axis. However, this condition may frequently be contravened in real-time a...
This paper investigates the controllability and synchronization of a newly designed three-dimensional chaotic system using active and adaptive control strategies. Although both controllers were designed with the help of a positive definite function u...
This paper aims to highlight the critical role of robot manipulators in industrial applications and elucidate the challenges associated with achieving high-precision control. In particular, the detrimental effects of nonlinear friction on manipulator...
Inthispaper, adirectuncertaintyminimizationframeworkisdevelopedanddemonstrated for model reference adaptive control laws. The proposed framework consists of a novel architecture involvingmodificationtermsintheadaptivecontrollawandtheupdatelaw. Inparti...
In this paper, stochastic analysis of a diseased prey–predator system involving adaptive back-stepping control is studied. The system was investigated for its dynamical behaviours, such as boundedness and local stability analysis. The global st...
The growing integration of renewable energy sources has led to the development of virtual synchronous generator (VSG) control as a way to enhance system stability and offer primary frequency regulation. These functions of VSGs usually rely on the pho...
In this paper, an adaptive technology and the interconnection and damping assignment passivity-based control method are combined to solve the stabilization problem for underactuated mechanical systems with uncertainties (including matched and unmatch...
In this work, a new adaptive block-backstepping control design algorithm was developed for an under-actuated model (represented by a ball–arc system) to enhance the transient and steady-state behaviors and to improve the robustness characterist...
Model predictive control (MPC) is commonly used to compensate for modeling inaccuracies and measurement noise in voltage control problems. The length of the prediction horizon and control horizon of a MPC-based method has significant impact on the co...
This paper presents the sensorless speed control of induction motors using a Model Reference Adaptive System (MRAS) method and field-oriented control. The main objective is to minimize the cost related to speed sensors, thereby improving both the aff...
To precisely and timely control the shaft speed for a marine electric propulsion system under normal sea conditions, a new shaft speed control technique combining the evidential reasoning rule with the traditional PID controller was proposed in this...
Due to their large working space and fast response, cable driven systems have been widely applied in manufacturing, robotics and motion simulators, etc. However, the cable is flexible and tends to resonate at high frequencies, which raises challenges...
This study presents a control design of an angular position for the exoskeleton knee assistance system based on a model reference adaptive control (MRAC) strategy. Three schemes of the MRAC design have been proposed: the classical MRAC, MRAC with an...
The hybrid maglev train exhibits advantages such as a large suspension gap, high load-to-weight ratio, and low suspension energy consumption. However, challenges, including unmodeled uncertainties and multi-point coupling interference in the suspensi...
With the rapid development of new-generation cyber–physical system (CPS) technologies, the smart operation and management of the broad bean harvesting system are enabled. This paper proposed a smart broad bean harvesting system (SBHS) and a sel...
The stability of the power system is a critical issue for the reliable and safe operation of the network. Where maintaining voltage levels constant or within the prescribed permissible limit and robustness against disturbances, while the power system...
In order to improve the trajectory tracking accuracy of an Underwater Vehicle Manipulator System (UVMS) under uncertain disturbance conditions of ocean current, a Model-free Adaptive Control (MFAC) method was used. Combined with Radial Basis Function...
In this paper, an adaptive terminal sliding-mode control (ATSMC) method is proposed for the synchronization of uncertain fractional-order chaotic systems with disturbances. According to the sliding-mode control theory, a non-singular sliding surface...
Achieving high-precision tracking control in electrohydraulic servo systems remains challenging due to internal uncertainties, external disturbances, and inaccessible state variables. To address these issues, a command-filter-based velocity-free trac...
For ground source heat pump (GSHP) systems, conventional control strategies often suffer from significant hysteresis, leading to energy waste and occupant discomfort. This study proposes and validates a novel Prediction Self-Adaptive Control (PSAC) t...
The aircraft anti-skid braking system (AABS) is an essential aero electromechanical system to ensure safe take-off, landing, and taxiing of aircraft. In addition to the strong nonlinearity, strong coupling, and time-varying parameters in aircraft dyn...
In this paper, model predictive control (MPC) based on an adaptive neural-fuzzy inference system (ANFIS) is proposed to realize control of an omni-directional service robot in path tracking. The weight of the cost function in a traditional MPC needs...
The performances of position synchronization and force interaction of the teleoperation system provide a safe and efficient way for operators to perform tasks in remote, hazardous environments. In practice, however, communication delays and dynamic u...
of 267