Skip to Content

943 Results Found

  • Article
  • Open Access
19 Citations
17,712 Views
9 Pages

Multi-junction solar cells can be economically viable for terrestrial applications when operated under concentrated illuminations. The optimal design of concentrator optics in high concentration photovoltaics (HCPV) systems is crucial for achieving h...

  • Article
  • Open Access
3 Citations
3,494 Views
17 Pages

Robust Full-Screen Wavelength Calibration Algorithm

  • Baisong Jiang,
  • Chunxia Zhang,
  • Nanqi Zhao,
  • Hongguang Li and ,
  • Liang Yuan,
  • Juan Chen,
  • Haowen Bai and
  • Le Wang
  • + 3 authors+ 0 author

13 January 2023

In spectrometer measurement, it is very important to accurately calibrate the wavelength of all target characteristic spectra. Although wavelength calibration methods have long been investigated, no techniques have been designed for the scanning, dou...

(This article belongs to the Section Optics and Lasers)
  • Article
  • Open Access
2 Citations
2,506 Views
14 Pages

5 August 2023

Secondary aluminum ash (SAA) is a common waste that, without reasonable treatment, results in pollution to the environment. A large amount of CO2 is emitted by human activities every day. If the CO2 cannot be treated in a timely manner, it will accel...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
9 Citations
3,764 Views
12 Pages

Secondary Recrystallization Goss Texture Development in a Binary Fe81Ga19 Sheet Induced by Inherent Grain Boundary Mobility

  • Zhenghua He,
  • Yuhui Sha,
  • Ning Shan,
  • Yongkuang Gao and ,
  • Fan Lei,
  • Fang Zhang and
  • Liang Zuo
  • + 2 authors+ 0 author

23 November 2019

Secondary recrystallization Goss texture was efficiently achieved in rolled, binary Fe81Ga19 alloy sheets without the traditional dependence on inhibitors and the surface energy effect. The development of abnormal grain growth (AGG) of Goss grains wa...

(This article belongs to the Special Issue Microstructure, Texture and Properties Control in Alloys)
  • Article
  • Open Access
3 Citations
2,548 Views
14 Pages

18 November 2022

The copper molten marks at a fire site provide important clues for determining the causes of fire. Four factors have been presented to quantitatively discriminate copper molten marks, namely the fraction of (001) component perpendicular to the demarc...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
6 Citations
2,817 Views
14 Pages

Potential Method to Distinguish Copper Molten Marks Using Boundary and Grain Characteristics

  • Jinyoung Park,
  • Joo-Hee Kang,
  • Hyo-Sun Jang,
  • Young Ho Ko and
  • Sun Bae Bang

28 June 2022

The microstructure of molten marks changes according to ambient temperatures, when a short circuit occurs. Investigation of microstructural changes is important for understanding the properties of copper and examining the cause of a fire. In this stu...

  • Article
  • Open Access
4 Citations
3,455 Views
12 Pages

23 May 2019

When 2205 duplex stainless steel (DSS) is immersed in simulated seawater under high hydrostatic pressure, or in an electrochemically hydrogen charged state, a spindle-shaped product is found in the ferrite phase that seriously deteriorates the mechan...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
33 Citations
6,945 Views
16 Pages

Atmospheric Pressure Plasma Polymerization Synthesis and Characterization of Polyaniline Films Doped with and without Iodine

  • Choon-Sang Park,
  • Eun Young Jung,
  • Dong Ha Kim,
  • Do Yeob Kim and ,
  • Hyung-Kun Lee,
  • Bhum Jae Shin,
  • Dong Ho Lee and
  • Heung-Sik Tae
  • + 3 authors+ 0 author

6 November 2017

Although polymerized aniline (polyaniline, PANI) with and without iodine (I2) doping has already been extensively studied, little work has been done on the synthesis of PANI films using atmospheric pressure plasma (APP) deposition. Therefore, this st...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
1 Citations
232 Views
18 Pages

Reassessment of the Validity of Primary Arc Bead Generation Methods: Ignition Experiments and EBSD Analysis

  • Kwangmuk Park,
  • Jeong-Hwan Kim,
  • Chiwoo Choi,
  • DaeRyeong Baek and
  • Jeongchay Jeon

19 October 2026

This study comparatively analyzed the experimental methods used in previous studies to generate primary and secondary arc beads, with particular emphasis on the conductor temperature conditions. On this basis, the suitability of these methods was cri...

(This article belongs to the Special Issue Photovoltaic and Electrical Fires: 2nd Edition)
  • Article
  • Open Access
14 Citations
3,961 Views
11 Pages

29 May 2019

Vanadis 10 steel is a powder metallurgy processed tool steel. The aim of the present study is to analyze the microstructural variation in this steel that takes place when the process variables related to the heat treatments of quenching and tempering...

  • Article
  • Open Access
21 Citations
4,297 Views
10 Pages

7 May 2019

With the aim of improving erosive wear resistance in hypoeutectic white cast irons with 18% Cr and 2% Mo, several samples of this grade were subjected to different heat treatments at 1000 °C to destabilize the austenite. The dwell times at this t...

  • Article
  • Open Access
15 Citations
3,004 Views
13 Pages

27 July 2023

Secondary aluminum ash is a kind of common solid waste which will pollute the environment without any treatment. In this study, the influence of secondary aluminum ash on the rheological properties and the initial setting time of fresh reactive powde...

(This article belongs to the Special Issue Research on Low Carbonization Application of Magnesia-Based Cementitious Materials)
  • Article
  • Open Access
1 Citations
2,261 Views
12 Pages

Secondary Phase CeO2 Precipitates in Ce,Er-Doped Na0.5La0.5MoO4 Single Crystals Grown by Czochralski Method

  • Elena I. Suvorova,
  • Kirill A. Subbotin,
  • Denis A. Lis,
  • Evgeny V. Zharikov and
  • Philippe A. Buffat

19 July 2023

Analytical scanning and transmission electron microscopy were used to study the microstructure of Ce,Er-doped Na0.5La0.5MoO4 laser crystals. Crystals were grown by the Czochralski method from the melts with a nominal composition of Na0.5La0.5−x...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
11 Citations
2,468 Views
14 Pages

14 August 2023

Secondary aluminum ash (SAA) is a type of common solid waste which leads to pollution without treatment. Due to its chemical reactivity, the application of SAA to reactive powder concrete (RPC) may help solidify this solid waste while increasing its...

(This article belongs to the Section Corrosion)
  • Article
  • Open Access
5 Citations
3,553 Views
19 Pages

17 February 2018

This paper investigates the Additional Secondary Phase Factor (ASF) characteristics of Automatic Identification System (AIS) signals spreading over a rough sea surface. According to the change of the ASFs for AIS signals in different signal form, the...

(This article belongs to the Section Remote Sensors)
  • Article
  • Open Access
38 Citations
8,615 Views
13 Pages

Five New Secondary Metabolites Produced by a Marine-Associated Fungus, Daldinia eschscholzii

  • Zheng-Xi Hu,
  • Yong-Bo Xue,
  • Xiao-Bin Bi,
  • Jin-Wen Zhang and ,
  • Zeng-Wei Luo,
  • Xiao-Nian Li,
  • Guang-Min Yao,
  • Jian-Ping Wang and
  • Yong-Hui Zhang
  • + 4 authors+ 0 author

20 November 2014

Five new compounds, including a benzopyran ribonic glycoside, daldiniside A (1), two isocoumarin ribonic glycosides, daldinisides B (2) and C (3), and two alkaloids, 1-(3-indolyl)-2R,3-dihydroxypropan-1-one (4) and 3-ethyl-2, 5-pyrazinedipropanoic...

(This article belongs to the Special Issue Marine Natural Products - Advances in Separation, Characterisation and Chemical Profiling Methodologies)
  • Article
  • Open Access
21 Citations
11,591 Views
14 Pages

Silicides and Nitrides Formation in Ti Films Coated on Si and Exposed to (Ar-N2-H2) Expanding Plasma

  • Isabelle Jauberteau,
  • Richard Mayet,
  • Julie Cornette,
  • Denis Mangin and ,
  • Annie Bessaudou,
  • Pierre Carles,
  • Jean Louis Jauberteau and
  • Armand Passelergue
  • + 3 authors+ 0 author

8 February 2017

The physical properties including the mechanical, optical and electrical properties of Ti nitrides and silicides are very attractive for many applications such as protective coatings, barriers of diffusion, interconnects and so on. The simultaneous f...

(This article belongs to the Special Issue Five Years of Coatings: Coatings Science and Technology for the 21st Century)
  • Article
  • Open Access
25 Citations
7,690 Views
9 Pages

Bioactive Isopimarane Diterpenes from the Fungus, Epicoccum sp. HS-1, Associated with Apostichopus japonicus

  • Xuekui Xia,
  • Jun Qi,
  • Yayue Liu,
  • Airong Jia and ,
  • Yonggang Zhang,
  • Changheng Liu,
  • Cuiling Gao and
  • Zhigang She
  • + 3 authors+ 0 author

2 March 2015

One new isopimarane diterpene (1), together with two known compounds, 11-deoxydiaporthein A (2) and iso-pimara-8(14),15-diene (3) were isolated from the culture of Epicoccum sp., which was associated with Apostichopus japonicus. Their structures wer...

(This article belongs to the Special Issue Bioactive Compounds from Marine Microbes)
  • Article
  • Open Access
2 Citations
3,532 Views
9 Pages

14 March 2019

Holographic volume phase gratings are recorded in an epoxy-based, free-surface, volume holographic recording material. Light-induced gratings are formed by photo-triggered mass migration caused by component diffusion. The material resolution enables...

(This article belongs to the Special Issue Stimuli-Responsive Polymeric Materials)
  • Article
  • Open Access
1 Citations
5,020 Views
16 Pages

Expanding Plasma Process for Nitriding Mo–Ti Bilayer Thin Films

  • Isabelle Jauberteau,
  • Richard Mayet,
  • Julie Cornette,
  • Pierre Carles and ,
  • Denis Mangin,
  • Annie Bessaudou,
  • Jean Louis Jauberteau and
  • Armand Passelergue
  • + 3 authors+ 0 author

5 February 2019

Owing to the reducing effect of NHx radicals and H species produced in (Ar-N2-H2) expanding plasma, chemical reactions are promoted in thin metal films in contrast with other plasma treatments where the impinging energetic ions play the main role. Mu...

(This article belongs to the Collection Surface and Interface Science and Engineering for the Society of the Future)
  • Article
  • Open Access
3 Citations
2,933 Views
18 Pages

31 January 2023

With the implementation of the “double carbon” policy in various countries in the world, the demand for grain-oriented electrical steel with low iron loss and high magnetic induction is increasing. Reducing the thickness of the steel shee...

(This article belongs to the Special Issue Texture, Microstructure and Properties of Electrical Steels)
  • Article
  • Open Access
95 Citations
8,925 Views
19 Pages

Mycosynthesis of ZnO Nanoparticles Using Trichoderma spp. Isolated from Rhizosphere Soils and Its Synergistic Antibacterial Effect against Xanthomonas oryzae pv. oryzae

  • Balagangadharaswamy Shobha,
  • Thimappa Ramachandrappa Lakshmeesha,
  • Mohammad Azam Ansari,
  • Ahmad Almatroudi and ,
  • Mohammad A. Alzohairy,
  • Sumanth Basavaraju,
  • Ramesha Alurappa,
  • Siddapura Ramachandrappa Niranjana and
  • Srinivas Chowdappa
  • + 4 authors+ 0 author

20 September 2020

The Plant Growth Promoting Fungi (PGPF) is used as a source of biofertilizers due to their production of secondary metabolites and beneficial effects on plants. The present work is focused on the co-cultivation of Trichoderma spp. (T. harzianum (PGT4...

(This article belongs to the Special Issue Fungal Nanotechnology)
  • Article
  • Open Access
5 Citations
4,317 Views
9 Pages

A Flow-Through Reaction Cell for Studying Minerals Leaching by In-Situ Synchrotron Powder X-ray Diffraction

  • Fatemeh Nikkhou,
  • Fang Xia,
  • Xizhi Yao,
  • Idowu A. Adegoke and ,
  • Qinfen Gu and
  • Justin A. Kimpton
  • + 1 author+ 0 author

8 November 2020

A flow-through reaction cell has been developed for studying minerals leaching by in-situ time-resolved powder X-ray diffraction, allowing for a better understanding of the leaching mechanisms and kinetics. The cell has the capability of independent...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
9 Citations
2,533 Views
17 Pages

Heterogeneity of the Dendrite Array Created in the Root of Cored SX Turbine Blades during Initial Stage of Crystallization

  • Robert Paszkowski,
  • Jacek Krawczyk,
  • Włodzimierz Bogdanowicz,
  • Dariusz Szeliga and
  • Jan Sieniawski

26 December 2020

The roots of cored single-crystalline turbine blades made of a nickel-based CMSX-4 superalloy were studied. The casts were solidified by the vertical Bridgman method in an industrial ALD furnace using the spiral selector and selector continuer situat...

  • Communication
  • Open Access
1 Citations
1,925 Views
5 Pages

Synthesis of 1,2,4-Oxadiazoles Based on Diffractaic Acid

  • Aleksandr Filimonov,
  • Anastasia Diveikina,
  • Yuri Gatilov,
  • Olga Luzina and
  • Nariman Salakhutdinov

1 November 2024

Diffractic acid 1 is a secondary metabolite of depside lichens with antibacterial and insecticidal properties, and anticancer, hepatoprotective and antiviral activities. Novel diffractaic acid derivatives containing a 1,2,4-oxadiazole ring with an ar...

  • Article
  • Open Access
3 Citations
2,683 Views
9 Pages

Effect of Collimation on Diffraction Signal-to-Background Ratios at a Neutron Diffractometer

  • Dunji Yu,
  • Yan Chen,
  • David Conner,
  • Kevin Berry and ,
  • Harley Skorpenske and
  • Ke An
  • + 1 author+ 0 author

High diffraction signal-to-background ratios (SBRs), the ratio of diffraction peak integrated intensity over its background intensity, are desirable for a neutron diffractometer to acquire good statistics for diffraction pattern measurements and subs...

(This article belongs to the Section Instrumentation and Facilities)
  • Article
  • Open Access
7 Citations
3,518 Views
13 Pages

20 July 2021

In order to evaluate the effect of secondary cold reduction rate on the drawing performance of double reduction tinplate and explain the mechanism, a detailed investigation into the microstructural characterization, dissolved carbon atoms, texture ch...

  • Article
  • Open Access
7 Citations
7,597 Views
18 Pages

Why Do Secondary Cracks Preferentially Form in Hot-Rolled ODS Steels in Comparison with Hot-Extruded ODS Steels?

  • Aniruddh Das,
  • Hans-Werner Viehrig,
  • Eberhard Altstadt,
  • Frank Bergner and
  • Jan Hoffmann

25 July 2018

Secondary cracks are known to absorb energy, retard primary crack propagation and initiate at lower loads than primary cracks. They are observed more often in hot-rolled than in hot-extruded ODS steels. In this work, the microstructural factors respo...

(This article belongs to the Special Issue Nanostructured Ferritic Alloys)
  • Article
  • Open Access
34 Citations
4,488 Views
15 Pages

Effect of Soil Composition on Secondary Metabolites of Moroccan Saffron (Crocus sativus L.)

  • Soukaina Chaouqi,
  • Natalia Moratalla-López,
  • Gonzalo L. Alonso,
  • Cándida Lorenzo and ,
  • Abdelmjid Zouahri,
  • Nazha Asserar,
  • El Mehdi Haidar and
  • Taoufiq Guedira
  • + 3 authors+ 0 author

6 February 2023

Climate and soil are important factors that affect the quality of saffron. Saffron quality is determined by the marked content of secondary metabolites. The objective of this work was to study the effect of soil physicochemical properties on the seco...

(This article belongs to the Special Issue Impact of Abiotic Stresses on Plant-Soil Nutrient Status, Metabolism, Growth, and Ecosystem Functions)
  • Article
  • Open Access
3 Citations
2,306 Views
15 Pages

Effects of Temperature and Secondary Orientations on the Deformation Behavior of Single-Crystal Superalloys

  • Sujie Liu,
  • Cui Zong,
  • Guangcai Ma,
  • Yafeng Zhao and ,
  • Junjie Huang,
  • Yi Guo and
  • Xingqiu Chen
  • + 2 authors+ 0 author

18 November 2024

The tensile behavior of single-crystal superalloys was investigated at room temperature (RT) and 850 °C, focusing on various secondary orientations. Transmission electron microscopy (TEM) and quasi in situ electron backscatter diffraction (EBSD)...

(This article belongs to the Special Issue Microstructure and Mechanical Behaviour of Structural Materials)
  • Article
  • Open Access
7 Citations
5,319 Views
13 Pages

Flat-Top Cylinder Indenter Examination of Duplex Stainless Steel 2205 after Different Heat Treatments

  • Giuliano Angella,
  • Alessandra Fava,
  • Roberto Montanari,
  • Maria Richetta and
  • Alessandra Varone

17 May 2017

The duplex stainless steel 2205 was heat treated at 750 °C, 850 °C, and 900 °C for increasing durations of up to 10 h. The samples were investigated through light microscopy (LM), transmission electron microscopy (TEM), and X-ray diffraction (XRD) to...

  • Article
  • Open Access
12 Citations
3,846 Views
24 Pages

1 October 2020

The mineralogy of surface crusts and efflorescent salts of two old abandoned tailings (Xochula and Remedios) of the mining district of Taxco, Guerrero, was studied by short-wave infrared spectroscopy (SWIR), X-ray diffraction (XRD), and scanning elec...

(This article belongs to the Special Issue Pollutants in Acid Mine Drainage)
  • Article
  • Open Access
22 Citations
4,962 Views
14 Pages

Reactive Mechanism of Cu2ZnSnSe4 Thin Films Prepared by Reactive Annealing of the Cu/Zn Metal Layer in a SnSex + Se Atmosphere

  • Liyong Yao,
  • Jianping Ao,
  • Ming-Jer Jeng,
  • Jinlian Bi and ,
  • Shoushuai Gao,
  • Guozhong Sun,
  • Qing He,
  • Zhiqiang Zhou,
  • Yi Zhang and
  • Liann-Be Chang
  • + 6 authors+ 1 author

23 December 2018

Cu2ZnSnSe4 (CZTSe) thin films were prepared by a two-step process with the electrodeposition of a Cu/Zn metallic stack precursor followed by a reactive anneal under a Se + Sn containing atmosphere. We investigate the effect of the Sex and SnSex (x =...

(This article belongs to the Special Issue Selected Papers from Taiwan Association for Academic Innovation, TAAI 2018)
  • Article
  • Open Access
6 Citations
2,521 Views
12 Pages

25 November 2022

High-temperature annealing is a key step for the secondary recrystallization of grain-oriented silicon steel, which has an important effect on the final sharp Goss texture. In this work, the effects of three different annealing atmospheres during hig...

  • Article
  • Open Access
18 Citations
7,126 Views
12 Pages

Influence of Particle Morphologies of LiFePO4 on Water- and Solvent-Based Processing and Electrochemical Properties

  • Benjamin Starke,
  • Stefan Seidlmayer,
  • Sebastian Jankowsky,
  • Oleksandr Dolotko and ,
  • Ralph Gilles and
  • Karl-Heinz Pettinger
  • + 1 author+ 0 author

LiFePO4 (LFP) primary particles and secondary agglomerates have been processed into water- and solvent-based cathodes. By means of neutron and X-ray diffraction it was found that no structural changes of LiFePO4 occurred upon water- and solvent-based...

(This article belongs to the Section Sustainable Chemical Engineering and Technology)
  • Communication
  • Open Access
2 Citations
3,912 Views
6 Pages

9 February 2022

In this communication, we present the crystal structure of a secondary amine: 4-chloro-N-(1-(pyridin-2-yl)ethyl)aniline (Lb) obtained from a stepwise reduction of an imine, (E)-N-(4-chlorophenyl)-1-(pyridin-2-yl)ethan-1-imine (La) with sodium borohyd...

  • Article
  • Open Access
17 Citations
9,099 Views
13 Pages

The microstructures of two metal hydride (MH) alloys, a Zr7Ni10 based Ti15Zr26Ni59 and a C14 Laves phase based Ti12Zr21.5V10Ni36.2Cr4.5Mn13.6Sn0.3Co2.0Al0.4, were studied using the electron backscatter diffraction (EBSD) technique. The first alloy wa...

(This article belongs to the Special Issue Nickel Metal Hydride Batteries)
  • Article
  • Open Access
73 Citations
3,877 Views
21 Pages

A thorough Investigation of Rare-Earth Dy3+ Substituted Cobalt-Chromium Ferrite and Its Magnetoelectric Nanocomposite

  • Ram H. Kadam,
  • Ravi Shitole,
  • Santosh B. Kadam,
  • Kirti Desai and ,
  • Atul P. Birajdar,
  • Vinod K. Barote,
  • Khalid Mujasam Batoo,
  • Sajjad Hussain and
  • Sagar E. Shirsath
  • + 4 authors+ 0 author

24 March 2023

The stoichiometric compositions of a ferrite system with a chemical formula CoCr0.5DyxFe1.5−xO4 where x = 0.0, 0.025, 0.05, 0.075 and 0.1 were prepared by the sol-gel auto-combustion method. The structural, morphological and magnetic properties...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
21 Citations
4,907 Views
27 Pages

Phase Transformation in 316L Austenitic Steel Induced by Fracture at Cryogenic Temperatures: Experiment and Modelling

  • Kinga Nalepka,
  • Błażej Skoczeń,
  • Marlena Ciepielowska,
  • Rafał Schmidt and ,
  • Jakub Tabin,
  • Elwira Schmidt,
  • Weronika Zwolińska-Faryj and
  • Robert Chulist
  • + 3 authors+ 0 author

30 December 2020

Investigations by electron backscatter diffraction (EBSD) and X-ray diffraction with the use of synchrotron radiation, as well as parallel extended finite element (XFEM) simulations, reveal the evolution of the 316L stainless steel microstructure in...

(This article belongs to the Special Issue Phase Transformation and Microstructure Evolution in Stainless Steels)
  • Article
  • Open Access
7 Citations
3,269 Views
16 Pages

Mechanical Performance of Mortars with Partial Replacement of Cement by Aluminum Dross: Inactivation and Particle Size

  • Daniel Parra-Molina,
  • Manuel Alejandro Rojas-Manzano,
  • Adriana Gómez-Gómez,
  • Mario Fernando Muñoz-Vélez and
  • Aníbal Maury-Ramírez

26 September 2023

Although the use of primary aluminum dross as cement replacement has shown promising results in mortars and concretes, there is a knowledge gap between the effect of the secondary dross inactivation process and particle sizes on the mechanical proper...

(This article belongs to the Special Issue Circular Economy in the Construction Sector)
  • Article
  • Open Access
1 Citations
2,440 Views
8 Pages

15 February 2022

This paper presents a method for calculating the insertion loss of barriers on the ground. The method combines the classic imaging method for an analysis of sound propagation with the secondary source model for diffraction by barriers in the time dom...

(This article belongs to the Special Issue Sound Field Control)
  • Article
  • Open Access
6 Citations
4,402 Views
11 Pages

Secondary Recrystallization Behavior in Fe-3%Si Grain-oriented Silicon Steel Produced by Twin-roll Casting and Simplified Secondary Annealing

  • Yang Wang,
  • Yuanxiang Zhang,
  • Feng Fang,
  • Xiang Lu and ,
  • Guo Yuan and
  • Guodong Wang
  • + 1 author+ 0 author

19 May 2020

Grain-oriented silicon steels were produced by the shortest processing route involving twin-roll strip casting, two-stage cold rolling with intermediate annealing, and simulated continuous annealing. The secondary recrystallization behavior of grain-...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
18 Citations
5,291 Views
10 Pages

Structure and Conductivity Studies of Scandia and Alumina Doped Zirconia Thin Films

  • Mantas Sriubas,
  • Nursultan Kainbayev,
  • Darius Virbukas,
  • Kristina Bočkutė and ,
  • Živilė Rutkūnienė and
  • Giedrius Laukaitis
  • + 1 author+ 0 author

In this work, scandia-doped zirconia (ScSZ) and scandia–alumina co-doped zirconia (ScSZAl) thin films were prepared by electron beam vapor deposition. X-ray diffraction (XRD) results indicated a presence of ZrO2 cubic phase structure, yet Raman...

(This article belongs to the Special Issue Current Research in Thin Film Deposition: Applications, Theory, Processing, and Characterisation)
  • Article
  • Open Access
18 Citations
4,261 Views
11 Pages

Characterization of a Disordered above Room Temperature Skyrmion Material Co8Zn8Mn4

  • Melissa E. Henderson,
  • James Beare,
  • Sudarshan Sharma,
  • Markus Bleuel and ,
  • Pat Clancy,
  • David G. Cory,
  • Michael G. Huber,
  • Casey A. Marjerrison,
  • Mathew Pula and
  • Dmitry A. Pushin
  • + 9 authors+ 4 authors

19 August 2021

Topologically nontrivial spin textures host great promise for future spintronic applications. Skyrmions in particular are of burgeoning interest owing to their nanometric size, topological protection, and high mobility via ultra-low current densities...

(This article belongs to the Section Quantum Materials)
  • Article
  • Open Access
17 Citations
3,105 Views
12 Pages

Modeling and X-ray Analysis of Defect Nanoclusters Formation in B4C under Ion Irradiation

  • Matlab N. Mirzayev,
  • Alexander A. Donkov,
  • Evgeni A. Popov,
  • Ertugrul Demir and ,
  • Sakin H. Jabarov,
  • Levan S. Chkhartishvili,
  • Samuel A. Adeojo,
  • Aleksandr S. Doroshkevich,
  • Alexey A. Sidorin and
  • Sergei V. Trukhanov
  • + 11 authors+ 6 authors

31 July 2022

In the presented work, B4C was irradiated with xenon swift heavy ions at the energy of 167 MeV. The irradiation of the substrate was done at room temperature to a fluence of 3.83 × 1014 ion/cm2. The samples were then analyzed with the X-ray diffracti...

(This article belongs to the Special Issue Computational Modeling and Simulation for Nanomaterials, Nanotechnology, and Nanoscience - II)
  • Article
  • Open Access
2 Citations
4,515 Views
15 Pages

Iridescent Iron Oxides

  • George R. Rossman and
  • Chi Ma

23 January 2025

Iridescent iron oxides known as rainbow hematite and turgite are found in a variety of localities worldwide and display a variety of beautiful interference colors. Usually, there is a thin layer of nanocrystals containing aluminum and phosphorous coa...

(This article belongs to the Section Crystallography and Physical Chemistry of Minerals & Nanominerals)
  • Article
  • Open Access
5 Citations
2,675 Views
12 Pages

Effect of Microwave-Assisted Synthesis and Sintering of Lead-Free KNL-NTS Ceramics

  • Anggel Lagunas-Chavarría,
  • María Guadalupe Navarro-Rojero,
  • María Dolores Salvador,
  • Rut Benavente and ,
  • Jose Manuel Catalá-Civera and
  • Amparo Borrell
  • + 1 author+ 0 author

25 May 2022

Lead-free piezoelectric powders (K0.44Na0.52Li0.04)(Nb0.82Ta0.10Sb0.04)O3 were obtained by conventional and microwave-assisted reactive heating. Firstly, the synthesis of the material was carried out following the mixed oxide route and employing both...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
27 Citations
4,600 Views
16 Pages

In this study, novel organic–inorganic composites were prepared by the complexation of dicarboxylic azo dye (AD) with aluminum–magnesium hydroxycarbonate (AlMg–LH). This procedure provides an effective method for the stabilization o...

(This article belongs to the Section Materials Chemistry)
  • Article
  • Open Access
695 Views
16 Pages

On the Effect of Heat-Treatments in a PBF-LB/M Processed FeCrMnNi Medium-Entropy Alloy

  • David Maximilian Diebel,
  • Thomas Wegener,
  • Zhengfei Hu and
  • Thomas Niendorf

21 March 2026

FeCrMnNi-based alloys, derived from the well-known Cantor high-entropy alloy, have attracted increasing attention due to their excellent strength–ductility balance. Additively manufactured FeCrMnNi variants are characterized by superior hardnes...

  • Article
  • Open Access
11 Citations
2,886 Views
11 Pages

18 January 2020

In this study, the phase transition of secondary phase particles in a composite coating is used to estimate the temperature field of the molten pool on a Ti6Al4V alloy in the micro-arc oxidation (MAO) process. The behavior of the sparks and the molte...

(This article belongs to the Section Thin Films and Interfaces)

of 19