The growing demand for electric vehicles has increased the need for rare earth elements (REEs), promoting the recycling of secondary sources such as end-of-life NdFeB permanent magnets. However, the selective separation of REEs with similar chemical...
This paper investigates the use of spent tyre rubber as a precursor for synthesising adsorbents to recover rare earth elements. Through pyrolysis and CO2 activation, tyre rubber is converted into porous carbonaceous materials with surface properties...
5 June 2022
A demo-scale (600 m3 working volume) anaerobic digester treating food waste leachate was monitored during its startup period. The operation strategy was adjusted twice (i.e., three distinct phases) during the operation to recover the process from ins...
Natural zeolite was investigated for ammonium nitrogen (NH4+–N) removal from both synthetic aqueous solutions and real pretreated landfill leachate using batch and continuous-flow systems. Batch experiments were conducted at initial NH4+–...
4 March 2020
This paper introduces BIOLEACH, a new decision support model for the real-time management of municipal solid waste bioreactor landfills that allows estimating the leachate and biogas production. Leachate production is estimated using an adaptation of...
In this research, the performance of nanomaterials obtained from the converter sludge (CS) of Esfahan Steel Company, Iran was investigated for the activation of persulfate (PS). The experiments were conducted on real and synthetic leachates. CS showe...
This paper provides an alternative treatment system for landfill gas and leachate control in order to reduce the energy consumption and disposal cost, using the recycled landfill gas as the combustion promoter for incineration of the leachate. This s...
Slags produced in the steelmaking industry could be a source of chromium. Slags contain, depending on different types of slags, between 2 to 5 wt.% of Cr. Roasting of slag with NaOH, followed by subsequent leaching can produce leachates which can be...
The leachate discharges generated in sanitary landfills contain many pollutants that are harmful to the environment; treatments are scarce and should be carried out better. The use of coagulation–flocculation processes has been one of the most...
The reduction in the fouling is an important way to maintain the steady operation for the nanofiltration (NF) process in leachate treatment. The fouling components from the real leachate treatment process were identified using a scanning electron mic...
Digital territories focus on community transformation through sustainable development, saving resources in local governments, bridging the digital gap, and using technology to build smart infrastructure. This article presents the design and implement...
The purpose of the study was to investigate the migration of oleamide, a polymer lubricant, and a bioactive compound, from various plastic, marketed containers for food/beverages and medicines into polymer contact liquid. Methanol, food/medicine simu...
Landfill leachate (LL) is a complex wastewater characterized by high concentrations of organic matter and heavy metals, posing significant challenges to conventional treatment technologies. Electrochemical methods, particularly electrocoagulation (EC...
Coal ash represents an abundant secondary resource of rare earth elements (REEs), but their recovery is hindered by low concentrations in leachates and the presence of large amounts of competing matrix elements such as Fe, Al, Ca, and Mg. In this stu...
Shales are increasingly being exploited for oil and unconventional gas. Exploitation of sub-arctic oil shales requires the creation of gravel pads to elevate workings above the heaving effects of ground ice. These gravel pads can potentially generate...
Landfill leachate, a byproduct of municipal solid waste treatment, typically contains hazardous substances such as toxic metals (e.g., lead) and eutrophication agents (e.g., phosphate). This study addresses the pressing challenge of polishing complex...
Two selected waste building sludges (WBS) were used in this study: (i) sludge from the production and processing of prestressed concrete pillars (B) and (ii) sludge from the production of technical stone (TS). The materials were used in their origina...
This study aimed to establish an economical and rapid response system for carcass leachate leakage using a real-time groundwater monitoring system with sensors. In this work, four parameters, namely electrical conductivity (EC), chloride (Cl), nitrat...
Membrane distillation (MD) was a promising approach for treating highly concentrated ammonia–nitrogen wastewater. However, membrane wetting often limited large-scale application. To address this, we built an anti-wetting layer on a commercial P...
At a former Danish polluted landfill, a field experiment using biofilters as an ex-situ remediation strategy for leachate water was carried out. The leachate water was polluted with phenoxy acids, mecoprop, dichlorprop, and their impurities originate...
Landfill leachate is a complex wastewater matrix characterized by high organic load, low biodegradability, elevated salinity, and the presence of inorganic contaminants. This study comprises two complementary but experimentally independent blocks: re...
The recovery of rare earth elements (REEs) from coal-derived acid leachates is challenged by high iron (Fe) concentrations, which can hinder downstream separation. In this study, a dual-adsorbent, multi-column strategy was evaluated for sequential Fe...
The treatment of real waste extracts with simultaneous energy production is currently under research. One method of addressing this dual task is using biochemical reactors named microbial fuel cells (MFCs). MFCs consist of a bioanode and a cathode wh...
Mature landfill leachates are characterized by high levels of ammoniacal nitrogen which must be reduced for discharge in the sewer system and further treatment in municipal wastewater treatment plants. The use of anammox-based processes can allow for...
Landfill leachate is generated from waste degradation in landfill sites, and its treatment includes biological or combined treatment with physico-chemical methods. A frequently applied technology in the biological stage of landfill leachate treatment...
This study focuses on the removal of arsenic (As) from contaminated water originating from an abandoned mercury mine landfill. To obtain results that more accurately reflect the material’s behavior under real-world conditions, tests were conduc...
Sewage sludge (SS) resulting from wastewater treatment plants (WWTP) is commonly applied worldwide as a fertilizer in agriculture. This can be done following a rigorous analysis of the sewage sludge composition. Due to its toxic potential, heavy meta...
In this study, a granular material (GM) derived from wastes generated in waste-to-energy plants was developed. Weathered bottom ash (WBA) and air pollution control (APC) ashes obtained from municipal solid waste incineration (MSWI) were used as raw m...
This study reports on the impact of elevated recovery (i.e., 80%, 85%, and 90%) on the fouling and performance of air gap membrane distillation (AGMD) with real seawater and landfill leachate wastewater samples using polytetrafluoroethylene (PTFE) po...
Solid waste from the decommissioning of coal-fired power plants collected from a power plant in Spain (Puertollano, Ciudad Real) was subjected to acid leaching tests in columns to evaluate the leachability of several valuable and toxic metals (Al, Ca...
Rare earth elements (REEs), comprising seventeen metallic elements, including lanthanides, scandium, and yttrium, are indispensable for modern technological industries due to their unique properties. However, their supply is critically risky for the...
Although mining activities are economically essential, they have led to significant environmental contamination, particularly in northern Chile. The discharge of untreated tailings has impacted coastal and soil ecosystems. This analysis investigates...
The mobility of selected heavy metals in trace concentrations was investigated in a standard OECD soil irrigated with the effluent of a real municipal wastewater treatment plant. While Cd, Cu and Ni accumulation-migration patterns were mainly influen...
The efficacy of an engineered treatment wetland system was explored for the treatment of real acid mine drainage. Precisely, the treatment chain was a hybrid approach made up of two distinct stages comprising neutralization with magnesite (stage 1) a...
Autochthonous fungi from contaminated wastewater are potential successful agents bioremediation thanks to their adaptation to pollutant toxicity and to competition with other microorganisms present in wastewater treatment plant. Biological treatment...
In this study, a commercial anion-exchange resin (D301), known for high regenerability but limited selectivity, was chemically modified to enhance its sorption performance. The modification included graft polymerization of glycidyl methacrylate follo...
The development of recovery processes has become essential in recent years as a strategy to minimize environmental pollution while boosting circular economy and sustainable development. Due to the exponential growth in agricultural production and the...
A novel bismuth (Bi)-biopolymer (chitosan) nanocomposite screen-printed carbon electrode was developed using a Bi and chitosan co-electrodepositing technique for detecting multiple heavy metal ions. The developed sensor was fabricated with environmen...
During the biochemical pretreatment process of leachate in urban landfill sites, if the foam in the A/O pool is not promptly addressed, it can lead to overflow, posing hazards to the surrounding environment and personnel. Therefore, a real-time foam...
Rare earth elements (REEs) are critical for advanced manufacturing and clean energy, yet their separation remains extremely challenging due to the nearly identical ionic radii of adjacent lanthanides. Conventional solvent extraction, ion exchange, an...
Two commercial activated carbon were functionalized with nitric acid, sulfuric acid, and ethylenediamine to induce the modification of their surface functional groups and facilitate the stability of corresponding AC-supported iron catalysts (Fe/AC-f)...
The technological development propitiates the rapid replacement of electrical and electronic equipment, which makes it indispensable to develop recycling processes for the treatment of this equipment when discarded. Printed circuit boards (PCBs) are...
Gold in a rock is usually associated with other elements, forms nuggets, or is hosted within the crystal lattice of a mineral (e.g., pyrite) and is often heterogeneously distributed and trapped inside the rock matrix even after crushing. Gold can be...
Formo-phenolic-like resins were synthesized by replacing phenol with phloroglucinol, a biobased and biocompatible compound, and using different aldehydes, such as biomass-derived furaldehyde and glyoxal. Studies on the adsorption of rare earth elemen...
Nanofiltration (NF) can enable P recovery from waste streams via retaining multivalent impurities from spent pickling acid. However, with the currently available membranes, an economically feasible process is impossible. Layer-by-layer modified NF me...
The present work evaluated the influence of eight different soil remediation techniques, based on the use of residual materials (gypsum, marble, vermicompost) on the reduction in metal(loid)s toxicity (Cu, Zn, As, Pb and Cd) in a polluted natural are...
Ion-imprinted polymers (IIPs) are advanced adsorbents featuring selective recognition cavities for targeted metal ion capture, offering a promising route to high-efficiency separation in extractive metallurgy. In the present work, the evolution, desi...
Considering that electronic wastes (e-wastes) have been recently recognized as a potent environmental and human threat, the present study aimed to assess the potential risk of personal computer motherboards (PCMBs) leaching into aquatic media, follow...
An ultrasound-assisted dispersive liquid–liquid microextraction (DLLME) method was developed to concentrate and quantify rare earth elements (REEs) (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) in acidic aqueous solutions....
Waste electrical and electronic equipment (WEEE) is a rapidly growing waste stream rich in precious metals, with gold in particular being concentrated in printed circuit boards and other high-value components. Historically, industrial recycling has r...
of 2