- Article
In this paper, the 60-year-old concept of long-range interaction in percolation problems introduced by Dalton, Domb and Sykes is reconsidered. With Monte Carlo simulation—based on the Newman–Ziff algorithm and the finite-size scaling hypo...
In this paper, the 60-year-old concept of long-range interaction in percolation problems introduced by Dalton, Domb and Sykes is reconsidered. With Monte Carlo simulation—based on the Newman–Ziff algorithm and the finite-size scaling hypo...
The critical damage point of the red-bed soft rock percolation phenomenon can be described as the percolation threshold. At present, there are insufficient theoretical and experimental studies on the percolation phenomenon and threshold of red-bed so...
Analyses of the processes of information transfer within network structures shows that the conductivity and percolation threshold of the network depend not only on its density (average number of links per node), but also on its spatial symmetry group...
An extensive experimental study was conducted to investigate the co-effects of surface area and distance between electrodes as well as filler scales on the percolation threshold of piezoresistive cement-stabilised sand. In this route, the electrical...
Graphene is a promising platform for surface-enhanced Raman spectroscopy (SERS)-active substrates, primarily due to the possibility of quenching photoluminescence and fluorescence. Here we study ultrathin gold films near the percolation threshold fab...
The electrical conductivity of extrinsically conducting polymer composite systems passes through a transition state known as percolation threshold. A discussion has been made on how different Sigmoidal models (S-models), such as Sigmoidal–Boltzmann (...
Polymer nanocomposites with engineered electrical properties can be made by tuning the fabrication method, processing conditions and filler’s geometric and physical properties. This work focuses on investigating the effect of filler’s geometry (aspec...
This article suggests simple and new equations for the percolation threshold of nanoparticles, the tunneling distance between nanoparticles, and the tunneling conductivity of polymer carbon nanotubes (CNTs) nanocomposites (PCNT), assuming an effectiv...
Fiber aggregation in nanocomposites has an important effect on macroscopic electrical performance. To quantitatively evaluate its effect, an index to characterize the degree of aggregation is imperative and, ideally, it should have three features sim...
This paper reports, for the first time, on the electrical percolation threshold in oxidized carbon nanohorns (CNHox)–polyvinylpyrrolidone (PVP) films. We demonstrate—starting from the design and synthesis of the layers—how these films can be used as...
A Monte Carlo (MC) model for the calculation of the percolation threshold in the composite filled with ellipsoids of revolution is developed to simulate the real experimental situation of percolative composites in which functional additives do not pe...
Bacterial cellulose nanocrystals (BCNCs) extracted from cellulose residues, resulting from film-cutting operations used for the commercial production of dressings, were studied as reinforcement for films based on gelatin, pectin, and hydroxypropylmet...
The contradiction between the threshold values of carbon nanomaterials in cement-based materials for enhancing electrical, magnetic, and mechanical properties appears irreconcilable in previous studies. Reducing the numerical differences of these thr...
The effect of the crystallization of polypropylene (PP) forming an immiscible polymer blend with polystyrene (PS) containing conductive multi-wall carbon nanotubes (MWCNTs) on its electrical conductivity and electrical percolation threshold (PT) was...
It is discussed that the classical effective medium theory for the elastic properties of random heterogeneous materials is not congruous with the effective medium theory for the electrical conductivity. In particular, when describing the elastic and...
The objective of this work was to obtain cement composites with low percolation thresholds, which would reduce the cost of graphite and maintain good mechanical properties. For this purpose, exfoliated graphite was used as a conductive additive, whic...
Graphene-based materials are a family of carbonaceous structures that can be produced using a variety of processes either from graphite or other precursors. These materials are typically a few layered sheets of graphene in the form of platelets and m...
In this study, in order to determine the effect of matrices’ shape on the percolation threshold values, computer simulations were performed using the Monte Carlo method for a 200 × 200 square-shaped matrix and rectangular matrices contain...
This study presents the functionalization of silk fabric with SWCNT ink. The first step was the formation of a polydopamine (PDA) thin coating on the silk fabric to allow for effective bonding of SWCNTs. PDA formation was carried out directly on the...
Percolative memristive networks based on self-organized ensembles of silver and gold nanoparticles are synthesized and investigated. Using cyclic voltammetry, pulse and step voltage excitations, we study switching between memristive and capacitive st...
Polycarbonate (PC), a thermoplastic polymer with excellent properties, is used in many advanced technological applications. When PC is blended with other polymers or additives, new properties, such as electrical properties, can be available. In this...
For the first time, the double electrical percolation threshold was obtained in polylactide (PLA)/polycaprolactone (PCL)/graphene nanoplatelet (GNP) composite systems, prepared by compression moulding and fused filament fabrication (FFF). Using scann...
The paper presents studies of the site percolation phenomenon for square matrixes with dimensions L = 55, 101 and 151 using the Monte Carlo computer simulation method. The number of iterations for each matrix was 5 × 106. An in-depth analysis o...
In this study, an in-depth analysis of the percolation phenomenon for square matrices with dimensions from L = 50 to 600 for a sample number of 5 × 104 was performed using Monte Carlo computer simulations. The percolation threshold value was de...
In the present study, Poly(methyl methacrylate) (PMMA)/single-walled carbon nanotubes (SWCNT) composites were prepared by melt mixing to achieve suitable SWCNT dispersion and distribution and low electrical resistivity, whereby the SWCNT direct incor...
Boiling crises are complex stochastic processes that are influenced by the physical phenomena of heat transfer and evaporation, as well as the shape and roughness of the boiling surface. When calculating the critical heat fluxes corresponding to the...
In this study, the phenomenon of node percolation was tested using the Monte Carlo computer simulation method for square matrices with dimensions L = 55, 101 and 151. The number of samples for each matrix was 5 × 106. The spatial distributions...
This paper examines some approaches to modeling and managing traffic flows in modern megapolises and proposes using the methods and approaches of the percolation theory. The author sets the task of determining the properties of the transport network...
This work reviews percolation-related phenomena in porous organosilica glass (OSG) low-k dielectrics and their critical impact on mass transport, electrical conductivity, mechanical integrity, and dielectric breakdown. We discuss how leakage current...
Cement composite materials with reduced resistivity are specialized building materials, which are constantly pushing their limits. Research into these composites requires a study of the influences of exposure conditions on resistivity. The mixes sele...
The interphase region around nanoparticles changes the percolation threshold of long and thin nanoparticles, such as carbon nanotubes (CNT) in polymer nanocomposites. In this paper, the effects of the interphase region on the percolation threshold of...
Biobased thermoplastic polyurethane (bTPU)/unmodified graphene (GR) nanocomposites (NCs) were obtained by melt-mixing in a lab-scaled conventional twin-screw extruder. Alternatively, GR was also modified with an ionic liquid (GR-IL) using a simple pr...
The aim of this work is a comprehensive study of the effect of variable atomic composition and structural-phase state of (CoFeZr)x(MgF2)100−x nanocomposites (NCs) on their nonlinear electronic and magnetic/magneto-optical properties. Micrometer...
To find out whether Al2O3 nanofiller is effective in improving the characteristics of polymer composites, composite polymer films based on biodegradable polylactide and epoxidized aluminum oxide nanofibers were obtained by solution casting. Surface m...
This study explores microcomposites’ thermodielectric properties—thermal conductivity (
This article describes a model for optimizing traffic flow control and generating traffic signal phases based on the stochastic dynamics of traffic and the percolation properties of transport networks. As input data (in SUMO), we use lane-level vehic...
The effect of ionic surfactants and manufacturing methods on the separation and distribution of multi-wall carbon nanotubes (CNTs) in a silicone matrix are investigated. The CNTs are dispersed in an aqueous solution of the anionic surfactant dodecylb...
The interphase layer surrounding nanoparticles can reflect the tunneling effect as the main mechanism of charge transferring in polymer/carbon nanotube (CNT) nanocomposites (PCNT). In this paper, the percolation threshold, effective volume fraction o...
Segregated conductive polymer composites exhibit excellent electrical properties with a low percolation threshold. However, the mechanical properties of the segregated conductive polymer composites were always poor because the conductive fillers at t...
Poly(lactic) acid nanocomposites filled with graphene nanoplatelets (GNPs) and multiwall carbon nanotubes (MWCNTs) are studied, varying the filler size, shape, and content within 1.5–12 wt.%. The effects of the intrinsic characteristics of nano...
The development of efficient plasmonic nanostructures with controlled and reproducible surface-enhanced Raman spectroscopy (SERS) signals is an important task for the evolution of ultrasensitive sensor-related methods. One of the methods to improving...
The results of experimental studies of ohmic conductivity degradation in the ensembles of nanostructured anatase bridges under a long-term effect of direct current are presented. Stochastic sets of partially conducting inter-electrode bridges consist...
One of the most important problems in agroecology is designing eco-friendly strategies to minimize the propagation of phytopathogens and pests. In this paper, we explore some strategies based on the modification of the plantation configuration togeth...
Highly oriented electrospun conductive nanofibrous biocomposites (CNBs) of polylactic acid (PLA) and polyaniline (PANi) are fabricated using electrospinning. At the percolation threshold (φc), the growth of continuous paths between PANi particles...
The electrical conductivity of dry sintered olivine aggregates with various contents of magnetite (0, 3, 5, 7, 10, 20, and 100 vol. %) was measured at temperatures of 873–1273 K and a pressure of 2.0 GPa within a frequency range of 0.1–10...
Polyvinyl alcohol is the most commercially water-soluble biodegradable polymer, and it is in use for a wide range of applications. It shows good compatibility with most inorganic/organic fillers, and enhanced composites may be prepared without the ne...
Polymer composites containing nanocarbon fillers are under intensive investigation worldwide due to their remarkable electromagnetic properties distinguished not only by components as such, but the distribution and interaction of the fillers inside t...
Electrically conductive polymer composites are in high demand for modern technologies, however, the intrinsic brittleness of conducting conjugated polymers and the moderate electrical conductivity of engineering polymer/carbon composites have highly...
The sensitivity of carbon nanofiber polyurethane cement (CNFPUC) was evaluated to determine whether the cement can act as an intelligent reinforcement material. The percolation thresholds at different polymer-to-cement ratios were determined through...
Conductive composites of polypropylene (PP) and polyethylene (PE) filled with thermally reduced graphene oxide (TRG) were prepared using two different processing sequences. One was a one-step processing method in which the TRG was simultaneously melt...
of 9