This paper presents a deep neural network (DNN) based design optimization methodology for dual-axis microelectromechanical systems (MEMS) capacitive accelerometer. The proposed methodology considers the geometric design parameters and operating condi...
The aim of this research was to study the effect of local raw materials on the formulation of a base cream formulation and determine the optimum proportion of each material that gives the required properties. Physicochemical properties of cream formu...
Soybean is a major crop used in the production of human food. The soybean hull (SH) is also known as the seed coat and it constitutes about 5–8% of the total seed on a dry weight basis, depending on the variety and the seed size. Dilute sulfuri...
Laser Powder Bed Fusion (LPBF) is one of the most commonly used and rapidly developing metal Additive Manufacturing (AM) technologies for producing optimized geometries, complex features, and lightweight components, in contrast to traditional manufac...
Zinc electroplating is a coating process controlled by several input process parameters. However, the commonly used input parameters for setting the process of zinc deposition are current density, temperature of the coating solution, zinc concentrati...
The use of cooling air during machining is an environmentally conscious procedure, and its applicability to different processes is a research priority. We studied tapping operations, an important operation in the assembly process, using cooling air w...
Glass fiber-reinforced polymer (GFRP) composites find wide applications in automobile, aerospace, aircraft and marine industries due to their attractive properties such as lightness of weight, high strength-to-weight ratio, high stiffness, good dimen...
Due to its near-net-shape manufacturing and ability to treat challenging-to-manufacture materials such as titanium alloys, Additive manufacturing (AM) is growing in popularity. However, due to the poor surface quality of AM components, finishing proc...
The experimental stress-strain curves from the standardized tests of Tensile, Plane Stress, Compression, Volumetric Compression, and Shear, are normally used to obtain the invariant λi and constants of material Ci that will define the behavior...
The onboard charger (OBC)/low-voltage DC-DC converter (LDC) integrated power inverter for electric vehicles comprises multiple electrical elements that can heat up, which can cause performance degradation and system instability issues in electric veh...
Shape memory alloys (SMAs) are advanced engineering materials which possess shape memory effects and super-elastic properties. Their high strength, high wear-resistance, pseudo plasticity, etc., makes the machining of Ni-Ti based SMAs difficult using...
Agricultural residues are the most abundant biomass and forage resources. Chopping is a precondition for either use, and reducing the shearing force has been considered as one of the most effective way to save energy. A smaller force can also permit...
Laser cladding technology serves as a pivotal technique in industrial production, especially in the realms of additive manufacturing, surface enhancement, coating preparation, and the repair of part surfaces. This study investigates the influence of...
Co-continuous composites have potential in friction and braking applications due to their unique tribological characteristics. The present study involves Taguchi grey relational analysis-based optimization of wear parameters such as applied load, sli...
The engineered cementitious composite (ECC) mixtures were prepared with Portland cement, ground fly ash, silica sand, and polyvinyl alcohol (PVA) fibers. Accordingly, four mix design factors with five levels each were designed using the Taguchi metho...
Effective cooling of the internal combustion (I. C.) engines is of utmost importance for their improved performance. Automotive heat exchangers used as radiator with low efficiency in the industry may pose a serious threat to the engines. Thus, therm...
Onion, one of the most consumed vegetables in the world, is also known to contain high levels of antioxidant compounds, with protective effects against different degenerative pathologies. Specifically, onion is rich in flavonols, mainly quercetin der...
This study aims to find the optimized parameters for surveying the milling process of S50C steel in a minimum quantity lubrication (MQL) environment using a support vector machine-genetic algorithm (SVM-GA). Based on the experimental matrix designed...
The onion is one of the most cultivated and consumed vegetables, and is a very valuable source of antioxidant substances. Every onion variety is rich in flavonols—mainly quercetin derivatives which makes onions the main dietary source of these compou...
The present study investigates the CNC milling performance of the machining of AISI 316 stainless steel using a carbide cutting tool insert. Three critical machining parameters, namely cutting speed (v), feed rate (f) and depth of cut (d), each at th...
The population is now more aware of their diets due to the connection between food and general health. Onions (Allium cepa L.), common vegetables that are minimally processed and grown locally, are known for their health-promoting properties. The org...
Red fruit oil (RFO) is a high-value oil that contains functional compounds, mainly phenolic compounds, providing antioxidant activity. Therefore, an optimal extraction method is essential to recover the RFO and phenolic compounds simultaneously. This...
The usage of food additives must respect the general legislation in force in the country and requires a reliable analytical method for surveillance. This research aimed to develop a high-performance liquid chromatography with diode array detection (H...
Multi-response optimization problems investigation is a crucial element in initiatives designed to enhance quality and overall productivity for manufacturing processes. Since no particular algorithm can be employed for all multi-response problems, de...
Backfill of mined-out areas in Carlin-type gold mines always encounters the challenges of ultra-fine tailings, low backfill strength and difficult slurry transportation caused by fine tailings. To understand the influence of slurry mass concentration...
Ecological manageability in manufacturing these days is a dire and exceptional issue and the principle concerns are identified with increasingly proficient utilization of energy and materials. Recycling can save a large amount greenhouse gas emission...
Olive oil production is one of the important industrial sectors within the agro-food framework of the Mediterranean region, economically important to the people working in this sector, although there is also a threat to the environment due to residue...
Multi-track laser cladding is the primary technology used in industrial applications for surface reinforcement and remanufacturing of broken parts. In this study, the influence of processing parameters on multi-track laser cladding was investigated u...
The present study aimed to optimize the process parameters (milling depth and advanced speed) for an asphalt milling operation using a multi-response approach based on Taguchi design of experiments (DOE) and Grey Relational Analysis (GRA). Nine simul...
The attainment of intricate part profiles for composite laminates for end-use applications is one of the tedious tasks carried out through conventional machining processes. Therefore, the present work emphasized hybrid intelligent modeling and multi-...
The design of a micromirror for biomedical applications requires multiple output responses to be optimized, given a set of performance parameters and constraints. This paper presents the parametric design optimization of an electrothermally actuated...
Electrical discharge machining (EDM) is a modern technology that is widely used in the production of difficult to cut conductive materials. The basic problem of EDM is the stochastic nature of electrical discharges. The optimal selection of machining...
The utilization of expanded polystyrene (EPS) beads in semi-lightweight concrete (SLC) intended for repair and building applications has gained great attention in recent years. This study examines the effect of mix design parameters including binder...
Excess Pb (II) concentrations in wastewater have raised concerns of a risk to health and the environment due to their toxicity. This has contributed to the need for sustainable technology to remove heavy metals from wastewater. Biosorption provides a...
Aurantii fructus (zhiqiao, ZQ) is a traditional Chinese medicine (TCM) and raw material of TCM healthcare food (TCM-HF), mainly focused on the regulation of gastrointestinal disorders and the abundant application of antioxidants. Pharmacological inve...
The selective laser melting technology is of great interest in the aerospace industry since it allows the implementation of more complex part geometries compared to the traditional technologies. This paper presents the results of studies to determine...
This study investigates multi-objective optimization of end-milling parameters for AISI D2 cold-worked tool steel using GC1130-coated carbide inserts under wet machining, focusing on cutting speed and feed rate per tooth values beyond manufacturer re...
Minimum quantity lubricant (MQL) is an advanced technique in machining to achieve sustainability, productivity, higher precision, economic benefits, and a reduction in carbon footprints. The present research work aims to investigate the effect of the...
The machining of ceramic materials is challenging and often impossible to realize with conventional machining tools. In various manufacturing applications, rotary ultrasonic milling (RUM) shows strengths, in particular for the development of high-qua...
The reactive crystallization of lithium carbonate (Li2CO3) from lithium sulfate (Li2SO4) and sodium carbonate (Na2CO3) solutions is a key process in harvesting solid lithium, whether from ores, brines, or clays. However, the process kinetics and mech...
The aim of this study was to valorize Thymus serpyllum herbal dust, a particular fraction distinguished as an industrial waste from filter-tea production. Pressurized liquid extraction (PLE) was used with the aim of overcoming certain obstacles of co...
Special attention is required when joining two materials with distinct chemical, physical and thermal properties in order to make the joint bond robust and rigid. The goal of this study was to see how significantly different tungsten inert gas (TIG)...
Aluminum metal matrix composites are potential materials for aerospace and automobile industrial applications due to their enhanced mechanical and tribological properties. Aluminum reinforced with silicon carbide particles has been developed with enh...
The demand for the surface integrity of complex structures is drastically increasing in the field of aerospace, marine and automotive industry. Therefore, Inconel alloy, due to its superior attributes, has a wide scope for the improvement in surface...
The aim of this study was to valorize Thymus serpyllum L. herbal dust, the particular fraction distinguished as industrial waste from filter-tea production. This work demonstrated comparable analysis considering model fitting, influence analysis and...
The purpose of real-life problems is often to be able to find less expensive and more effective ways of production without compromising product quality because companies must provide competitive advantage to maintain existence. In order to improve qu...
This study is focused on the application of a cooling compressed air system in drilling processes; this environmentally friendly technique allows removing material at very low temperatures, approximately up to −22 °C in the cutting area. Th...
Edible flowers, including roselle, contain a varied composition of phenolic compounds that may inhibit the oxidative stress mechanism. Roselle-based tisane with appealing sensory properties is commonly consumed worldwide. However, the conventional ho...
Plasma jet cutting is a non-conventional process commonly used in modern industry for processing metal sheets and preparing them for subsequent technological steps. In this context it is very important to achieve the best possible final-quality workp...
Pollution from industrial wastewater has the greatest impact on the environment due to the wide variety of wastes and materials that water can contain. These include heavy metals. Some of the technologies that are used to remove heavy metals from ind...
of 4