Liquid Assisted Laser Beam Micromachining (LA-LBMM) process is an advanced machining process that can overcome the limitations of traditional laser beam machining processes. This research involves the use of a Molecular Dynamics (MD) simulation techn...
Ge and its alloys are attractive candidates for a laser compatible with silicon integrated circuits. Dilute germanium carbide (Ge1−xCx) offers a particularly interesting prospect. By using a precursor gas with a Ge4C core, C can be preferentially inc...
Intrinsic magnetic topological insulators (IMTIs) have a non-trivial band topology in combination with magnetic order. This potentially leads to fascinating states of matter, such as quantum anomalous Hall (QAH) insulators and axion insulators. One o...
In this article, we will review recent progress in the growth of topological insulator (TI) thin films by molecular beam epitaxy (MBE). The materials we focus on are the V2-VI3 family of TIs. These materials are ideally bulk insulating with surface s...
Aluminum optics are widely used in modern optical systems because of their high specific stiffness and high reflectance. With the applied optical frequency band moving to visible, traditional processing technology cannot meet the processing precision...
Monolayer antimony (antimonene) has been reported for its excellent properties, such as tuneable band gap, stability in the air, and high mobility. However, growing high quality, especially large-area antimonene, remains challenging. In this study, w...
Lattice relaxation on wurtzite GaN microdisks grown by plasma-assisted molecular beam epitaxy was systematically studied. The lattice constants of GaN microdisks were evaluated from high-resolution transmission electron microscopy, and the anisotropi...
InGaAs-based bow-tie diodes for the terahertz (THz) range are found to be well suited for development of compact THz imaging systems. To further optimize design for sensitive and broadband THz detection, one of the major challenges remains: to unders...
This paper presents a new, comprehensive digital circuit used for the control of a novel gas chromatograph mass spectrometer (GC-MS) interface that is based on supersonic molecular beam (SMB). The circuit includes a Texas Instruments 150 MHz digital...
p-Type doping represents a key step towards III-nitride (InN, GaN, AlN) optoelectronic devices. In the past, tremendous efforts have been devoted to obtaining high quality p-type III-nitrides, and extraordinary progress has been made in both material...
In this paper, we introduce a space-fractional version of the molecular beam epitaxy (MBE) model without slope selection to describe super-diffusion in the model. Compared to the classical MBE equation, the spatial discretization is an important issu...
This review summarizes the recent research on nitride nanostructures and their applications. We cover recent advances in the synthesis and growth of porous structures and low-dimensional nitride nanostructures via metal-assisted photochemical etching...
Mg-doped GaN was grown by plasma-assisted molecular beam epitaxy (PAMBE) on a Fe-doped GaN template substrate by employing a shutter-controlled process. The transition from n-type to p-type conductivity of Mg-doped GaN in relation to the N/Ga flux ra...
We developed a simple form of thermal molecular beam catalytic reactor system which is capable of measuring sticking probabilities and reaction probabilities, together with angle-resolved scattering of molecules and products during catalytic reaction...
AlGaN based light emitting diodes (LEDs) will play a key role for the development of applications in the ultra-violet (UV). In the UVB region (280–320 nm), phototherapy and plant lighting are among the targeted uses. However, UVB LED performanc...
In this paper, we demonstrated the growth of GaAs/GaSb core-shell heterostructured nanowires on GaAs substrates, with the assistance of Au catalysts by molecular-beam epitaxy. Time-evolution experiments were designed to study the formation of GaSb sh...
We demonstrate the molecular beam epitaxy growth of two-dimensional van der Waals ferromagnet Fe3GaTe2 films with precisely controlled thicknesses down to a single unit cell. Magneto-optical Kerr effect microscopy measurements reveal robust room-temp...
BaBiO3 has recently gained significant research attention as a parent material for an interesting family of alloyed compositions with multiple technological applications. In order to grow a variety of structures, a versatile deposition tool such as m...
Three InAsSbBi samples are grown by molecular beam epitaxy at 400 °C on GaSb substrates with three different offcuts: (100) on-axis, (100) offcut 1° toward [011], and (100) offcut 4° toward [011]. The samples are investigated using X-ray diffraction,...
Indium-incorporation with InxGa1-xN layers on GaN-microdisks has been systematically studied against growth parameters by plasma-assisted molecular beam epitaxy. The indium content (x) of InxGa1-xN layer increased to 44.2% with an In/(In + Ga) flux r...
Development of molecular beam epitaxy (MBE) of two-dimensional (2D) layered materials is an inevitable step in realizing novel devices based on 2D materials and heterostructures. However, due to existence of numerous polytypes and occurrence of addit...
In this study, we explored the structural and chemical modifications of cellulose fibres subjected to chemical and mechanical treatments through an innovative analytical approach. We employed photoacoustic spectroscopy (PAS) and reversed double-beam...
Silicon-based germanium films are promising for the fabrication of low-power, high-performance electronic and optoelectronic devices. In this work, we report an effective approach for directly growing Ge films with ultrahigh carrier mobility on Si (0...
Rare-earth nitrides are an exciting family of materials with a wide variety of properties desirable for new physics and applications in spintronics and superconducting devices. Among them, samarium nitride is an interesting compound reported to have...
GaAsSb semiconductor material, a ternary alloy, has long been recognized as a crucial semiconductor in the near infrared range due to its ability to finely adjust the wavelength through controlling the Sb component. In this work, we report on the pat...
Vanadium dioxide (VO2) thermochromic thin films with various thicknesses were grown on quartz glass substrates by radio frequency (RF)-plasma assisted oxide molecular beam epitaxy (O-MBE). The crystal structure, morphology and chemical stoichiometry...
In this report, quantum dots of hexagonal boron nitride (h-BN) were fabricated on the surface of polycrystalline Ni film at low growth temperatures (700, 750, and 800 °C) by plasma-assisted molecular beam epitaxy. Reflection high-energy electron...
In this paper, we present a study on the direct growth of
AlGaN nanorods have attracted increasing amounts of attention for use in ultraviolet (UV) optoelectronic devices. Here, self-assembled AlGaN nanorods with embedding quantum disks (Qdisks) were grown on Si(111) using plasma-assisted molecular beam epi...
High-throughput analysis of biomass is necessary to ensure consistent and uniform feedstocks for agricultural and bioenergy applications and is needed to inform genomics and systems biology models. Pyrolysis followed by mass spectrometry such as mole...
InGaN quantum dots (QDs) have attracted significant attention as a promising material for high-efficiency micro-LEDs. In this study, plasma-assisted molecular beam epitaxy (PA-MBE) was used to grow self-assembled InGaN QDs for the fabrication of gree...
Quantum dot (QD)-based single-photon emitter devices today are based on self-assembled random position nucleated QDs emitting at random wavelengths. Deterministic QD growth in position and emitter wavelength would be highly appreciated for industry-s...
We demonstrate strain-balanced InAs/AlSb type-II superlattices (T2SL) grown on GaSb substrates employing two kinds of interfaces (IFs): AlAs-like IF and InSb-like IF. The structures are obtained by molecular beam epitaxy (MBE) for effective strain ma...
Self-assembled growth of blue-green-yellow-red InGaN quantum dots (QDs) on GaN templates using plasma-assisted molecular beam epitaxy were investigated. We concluded that growth conditions, including small N2 flow and high growth temperature are bene...
Thin films of BaM hexaferrite (BaFe12O19) were grown on α-Al2O3(0001) substrates by laser molecular beam epitaxy. Structural, magnetic, and magneto-optical properties were studied using medium-energy ion scattering, energy dispersive X-ray spec...
InGaN quantum dots (QDs) are promising candidates for GaN-based all-visible optoelectronic devices such as micro light-emitting diode and laser. In this study, self-assembled InGaN/GaN multi-quantum dots (MQDs) have been grown by plasma-assisted mole...
SiSn alloys have attracted growing interest for group-IV bandgap engineering, although their epitaxial growth remains challenging due to the extremely low equilibrium solubility of Sn in Si. In this work, fully strained (pseudomorphic) SiSn epitaxial...
SnSe2, as a prominent member of the post-transition metal dichalcogenides, exhibits many intriguing physical phenomena and excellent thermoelectric properties, calling for both fundamental study and potential application in two-dimensional (2D) devic...
GaN on Si plays an important role in the integration and promotion of GaN-based wide-gap materials with Si-based integrated circuits (IC) technology. A series of GaN film materials were grown on Si (111) substrate using a unique plasma assistant mole...
Gallium nitride (GaN) semiconductors and their broadband InGaN alloys in their hexagonal phase have been extensively studied over the past 30 years and have allowed the development of blue-ray lasers, which are essential disruptive developments. In a...
Experimental and theoretical assessments of phonon and optical characteristics are methodically accomplished for comprehending the vibrational, structural, and electronic behavior of InP1−xSbx/n-InAs samples grown by Gas-Source Molecular Beam E...
In this work, the effects of arsenic (As) flux used during gallium (Ga) seed droplet consumption and the post-growth annealing on the optical, electrical, and microstructural properties of self-catalyzed molecular beam epitaxially grown tellurium (Te...
Single-crystalline Si1−xGex thin films on Si (100) with low threading dislocation density (TDD) are highly desired for semiconductor industrials. It is challenging to suppress the TDD since there is a large mismatch (4.2%) between Ge and Si&mda...
This study reports the growth and structural analysis of β-Ga2O3 films on 4° off-axis (000±1) Si- and C-face 4H-SiC substrates by plasma-assisted molecular-beam epitaxy (PAMBE). Pre-growth treatments of 4H-SiC substrates were conducte...
We attained wurtzite ScxAl1−xN (0.16 ≤ x ≤ 0.37) thin films by varying the Sc and Al fluxes at a fixed active nitrogen flux during plasma-assisted molecular beam epitaxy. Atomic fluxes of Sc and Al sources via measured Sc percentage in as...
The lattice dynamical properties of dilute InAs1−xNx/InP (001) epilayers (0 ≤ x ≤ 0.03) grown by gas-source molecular beam epitaxy were carefully studied experimentally and theoretically. A high-resolution Brüker IFS 120 v/S spectrom...
We report a new approach to enhance the photonic response of thin-film topological insulator Bi2Se3 by significantly reducing twin domains and antiphase disorder. The strategy employs closely lattice-matched trigonal substrates combined with surface...
Molecular beam epitaxy technology has a significant advantage in semiconductor technology due to its strong controllability, especially for the preparation of materials such as quantum wires and quantum dots [...]
In this work, the formation, structural properties, and energy spectrum of novel self-assembled GaSb/AlP quantum dots (SAQDs) were studied by experimental methods. The growth conditions for the SAQDs’ formation by molecular beam epitaxy on both...
Molecular-beam epitaxial growth of Si-doped GaAs single-crystal layers on (110)-oriented GaAs substrates has been studied. The surface morphology of grown films was analyzed by scanning electron microscopy and atomic force microscopy, and the crystal...
of 17