Skip to Content

411 Results Found

  • Communication
  • Open Access
9 Citations
4,145 Views
11 Pages

Multilayered Composites with Modulus Gradient for Enhanced Pressure—Temperature Sensing Performance

  • Changyoon Jeong,
  • Sang-Ha Hwang,
  • Byeong-Joo Kim,
  • Han Gi Chae and
  • Young-Bin Park

12 July 2021

Highly sensitive and flexible composite sensors with pressure and temperature sensing abilities are of great importance in human motion monitoring, robotic skins, and automobile seats when checking the boarding status. Several studies have been condu...

(This article belongs to the Section Sensor Materials)
  • Review
  • Open Access
1 Citations
923 Views
23 Pages

Reducing Stress Shielding in Cementless Total Hip Arthroplasty: A Translational Review of the Gradient-Modulus Ti-Nb-Sn Femoral Stem

  • Yu Mori,
  • Hidetatsu Tanaka,
  • Kazuyoshi Baba,
  • Ryuichi Kanabuchi and ,
  • Naoko Mori and
  • Toshimi Aizawa
  • + 1 author+ 0 author

4 June 2026

Stress shielding (SS) after cementless total hip arthroplasty arises from the stiffness mismatch between conventional Ti-6Al-4V femoral stems (110 GPa) and cortical bone (10–30 GPa). The β-type Ti-33.6Nb-4Sn (TNS) alloy femoral stem addres...

(This article belongs to the Special Issue Biomechanical Analysis in Bioengineering: New Trends and Perspectives, 2nd Edition)
  • Article
  • Open Access
7 Citations
2,576 Views
14 Pages

18 February 2023

When using magnetic memory detection technology to locate weld cracks and porous defects, the traditional zero-point polarity theory leads to misjudgments in defect location and difficulty in distinguishing between the residual stress and the magneti...

  • Article
  • Open Access
12 Citations
3,308 Views
14 Pages

Biomechanical and Clinical Validation of a Modulus-Graded Ti-Nb-Sn Femoral Stem for Suppressing Stress Shielding in Total Hip Arthroplasty

  • Yu Mori,
  • Hidetatsu Tanaka,
  • Hiroaki Kurishima,
  • Ryuichi Kanabuchi and ,
  • Naoko Mori,
  • Keisuke Sasagawa and
  • Toshimi Aizawa
  • + 2 authors+ 0 author

26 April 2025

Stress shielding remains a major concern in cementless total hip arthroplasty (THA) due to the stiffness mismatch between femoral stems and surrounding bone. This study investigated the biomechanical and clinical performance of a novel Ti-33.6Nb-4Sn...

(This article belongs to the Special Issue Titanium and Its Compounds: Properties and Innovative Applications)
  • Article
  • Open Access
4 Citations
2,610 Views
15 Pages

3 November 2022

Large-span steel trusses are widely used in public buildings such as large-span factory buildings, exhibition halls, gymnasiums, and bridges because of their fast construction speed and easy industrial manufacturing. Due to construction errors and en...

(This article belongs to the Special Issue Structural Identification and Damage Evaluation by Integrating Physics-Based Models with Data)
  • Article
  • Open Access
4 Citations
1,748 Views
25 Pages

Design and Performance Evaluation of TPMS-Based Dual-Layer Gradient Porous Structures for Bone Scaffolds

  • Xiaobing Li,
  • Donglai Zhou,
  • Cuiyuan Lu,
  • Min Zhong and ,
  • Xianda Xie,
  • Linyu Zhou and
  • Yanghan Fu
  • + 2 authors+ 0 author

This study investigates and compares properties of various P-type Triply Periodic Minimal Surface (TPMS) porous structures for bone scaffold design. At first, six cases of homogeneous single/dual-layer structures, axial single/dual-layer gradient str...

(This article belongs to the Section Bone Biomaterials)
  • Article
  • Open Access
29 Citations
4,702 Views
16 Pages

Modern machine learning methods, such as tree ensembles, have recently become extremely popular due to their versatility and scalability in handling heterogeneous data and have been successfully applied across a wide range of domains. In this study,...

(This article belongs to the Special Issue Urban Geotechnical Engineering)
  • Article
  • Open Access
15 Citations
4,002 Views
20 Pages

23 November 2023

The porous structure can reduce the elastic modulus of a dental implant and better approximate the elastic characteristics of the material to the alveolar bone. Therefore, it has the potential to alleviate bone stress shielding around the implant. Ho...

(This article belongs to the Special Issue Metals and Alloys for Biomedical Application)
  • Article
  • Open Access
2 Citations
1,357 Views
24 Pages

Leveraging Machine Learning (ML) to Enhance the Structural Properties of a Novel Alkali Activated Bio-Composite

  • Assia Aboubakar Mahamat,
  • Moussa Mahamat Boukar,
  • Ifeyinwa Ijeoma Obianyo,
  • Philbert Nshimiyimana and ,
  • Blasius Ngayakamo,
  • Nordine Leklou and
  • Numfor Linda Bih
  • + 2 authors+ 0 author

1 September 2025

This study explored the use of Borassus fruit fiber as reinforcement for earthen matrices (BFRC). The experimental results of the testing carried out on the structural properties were used to generate a primary dataset for training and testing machin...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
1 Citations
1,118 Views
18 Pages

24 October 2025

The ageing of polymer-modified bitumen (PMB) significantly affects its rheological performance and service life in asphalt pavements. In this study, experimental data PMB 25/55–60 aged under a modified Thin Film Oven Test (TFOT) were restructur...

  • Article
  • Open Access
3 Citations
2,121 Views
18 Pages

12 September 2023

Accurate estimation of the elastic modulus (E) of rock is critical for the design of geotechnical projects such as mining, slopes, and tunnels. However, the determination of rock mechanical parameters usually involves high budget and time requirement...

(This article belongs to the Section E2: Control Theory and Mechanics)
  • Article
  • Open Access
26 Citations
4,707 Views
17 Pages

Utilization of Synthetic Near-Infrared Spectra via Generative Adversarial Network to Improve Wood Stiffness Prediction

  • Syed Danish Ali,
  • Sameen Raut,
  • Joseph Dahlen,
  • Laurence Schimleck and ,
  • Richard Bergman,
  • Zhou Zhang and
  • Vahid Nasir
  • + 2 authors+ 0 author

21 March 2024

Near-infrared (NIR) spectroscopy is widely used as a nondestructive evaluation (NDE) tool for predicting wood properties. When deploying NIR models, one faces challenges in ensuring representative training data, which large datasets can mitigate but...

(This article belongs to the Section Sensing and Imaging)
  • Article
  • Open Access
50 Citations
4,734 Views
21 Pages

Modified Nonlocal Strain Gradient Elasticity for Nano-Rods and Application to Carbon Nanotubes

  • Raffaele Barretta,
  • Marko Čanadija and
  • Francesco Marotti de Sciarra

2 February 2019

Nowadays, the modified nonlocal strain gradient theory provides a mathematically well-posed and technically reliable methodology to assess scale effects in inflected nano-structures. Such an approach is extended in this paper to investigate the exten...

(This article belongs to the Special Issue Recent Advances in Non-Local Modelling of Nano-Structures)
  • Article
  • Open Access
2 Citations
5,059 Views
12 Pages

18 March 2025

This study investigates the mechanical and optical characteristics of silicon nitride thin films deposited with PECVD at 80 °C for tunable silicon-rich SiNx-SiOy-based MEMS optical cavities. Varying the deposition parameters using SiH4 and N2 as...

(This article belongs to the Special Issue Interdisciplinary Approaches and Applications of Optics & Photonics)
  • Article
  • Open Access
9 Citations
1,975 Views
20 Pages

21 September 2025

To address the insufficient matching between high strength and low elastic modulus in traditional metal bone scaffolds and the issue of secondary surgical removal, this study used degradable zinc magnesium alloy as the material to study the relations...

(This article belongs to the Special Issue Advanced Nanoporous and Mesoporous Materials)
  • Article
  • Open Access
69 Citations
6,623 Views
23 Pages

Design and Mechanical Properties Verification of Gradient Voronoi Scaffold for Bone Tissue Engineering

  • Haiyuan Zhao,
  • Yafeng Han,
  • Chen Pan,
  • Ding Yang and ,
  • Haotian Wang,
  • Tingyu Wang,
  • Xinyun Zeng and
  • Penglei Su
  • + 3 authors+ 0 author

In order to obtain scaffold that can meet the therapeutic effect, researchers have carried out research on irregular porous structures. However, there are deficiencies in the design method of accurately controlling the apparent elastic modulus of the...

(This article belongs to the Special Issue 3D Bioprinting and Biofabrication for the Future of Tissue Engineering)
  • Article
  • Open Access
348 Views
24 Pages

5 June 2026

Interface debonding between the casing and cement sheath (CC interface) is a major cause of wellbore failure in hot dry rock geothermal wells. By adding iron filings to cement and varying their distribution along the radial direction, a cement sheath...

(This article belongs to the Section Petroleum and Low-Carbon Energy Process Engineering)
  • Article
  • Open Access
11 Citations
2,911 Views
15 Pages

13 August 2022

The interface quality is crucial for the properties of carbon fiber-reinforced polymer- matrix composites (CFRPs). In order to improve the interfacial and mechanical properties of CFRPs, a superior gradient modulus interfacial microstructure is const...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
1 Citations
2,869 Views
20 Pages

Properties of the Quadratic Transformation of Dual Variables

  • Vladimir Krutikov,
  • Elena Tovbis,
  • Anatoly Bykov,
  • Predrag Stanimirovic and ,
  • Ekaterina Chernova and
  • Lev Kazakovtsev
  • + 1 author+ 0 author

7 March 2023

We investigate a solution of a convex programming problem with a strongly convex objective function based on the dual approach. A dual optimization problem has constraints on the positivity of variables. We study the methods and properties of transfo...

(This article belongs to the Collection Feature Papers in Algorithms)
  • Article
  • Open Access
8 Citations
2,287 Views
15 Pages

Preparation of Gradient Polyurethane and Its Performance for Flexible Sensors

  • Chuanqi Ning,
  • Depeng Gong,
  • Lili Wu,
  • Wanyu Chen and
  • Chaocan Zhang

7 June 2024

Flexible sensors are prone to the problems of slow recovery rate and large residual strain in practical use. In this paper, a polyurethane functional composite with a gradient change in elastic modulus is proposed as a flexible sensor to meet the rec...

(This article belongs to the Special Issue State of the Art and Perspectives of Polymer Science and Technology in China)
  • Article
  • Open Access
176 Citations
5,881 Views
22 Pages

Stability and Dynamics of Viscoelastic Moving Rayleigh Beams with an Asymmetrical Distribution of Material Parameters

  • Ali Shariati,
  • Dong won Jung,
  • Hamid Mohammad-Sedighi,
  • Krzysztof Kamil Żur and ,
  • Mostafa Habibi and
  • Maryam Safa
  • + 1 author+ 0 author

7 April 2020

In this article, vibration of viscoelastic axially functionally graded (AFG) moving Rayleigh and Euler–Bernoulli (EB) beams are investigated and compared, aiming at a performance improvement of translating systems. Additionally, a detailed stud...

(This article belongs to the Special Issue Recent Advances in the Study of Symmetry and Continuum Mechanics)
  • Article
  • Open Access
6 Citations
1,573 Views
18 Pages

15 August 2025

Tensile strength and elastic modulus are key mechanical properties for continuous basalt fibers, which are inherently sustainable materials derived from naturally occurring volcanic rock. This study employs five ensemble learning models, including Ex...

(This article belongs to the Section Resources and Sustainable Utilization)
  • Article
  • Open Access
8 Citations
3,133 Views
22 Pages

Stress–Strain Model for Freezing Silty Clay under Frost Heave Based on Modified Takashi’s Equation

  • Lin Geng,
  • Shengyi Cong,
  • Jun Luo,
  • Xianzhang Ling and ,
  • Xiuli Du and
  • Yuan Yu
  • + 1 author+ 0 author

2 November 2020

In analyzing frost heave, researchers often simplify the compressive modulus of freezing soil by considering it as a constant or only as a function of temperature. However, it is a critical parameter characterizing the stress–strain behavior of...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
5 Citations
1,802 Views
37 Pages

Layered Gradient Rhombic Dodecahedron Composite Structures for Biomimetic Bone Fabricated via Selective Laser Melting

  • Yun Zhai,
  • Tianyuan Zhong,
  • Shuangquan Guo,
  • Sheng Lin and ,
  • David Hui and
  • Xiaowei Ma
  • + 1 author+ 0 author

Porous bone implants have been extensively studied, with gradient structures receiving increasing attention due to their superior compatibility with bone tissue. However, comparative studies between gradient and uniform structures remain relatively s...

(This article belongs to the Section D3: 3D Printing and Additive Manufacturing)
  • Article
  • Open Access
19 Citations
4,103 Views
16 Pages

Parametric Design of Porous Structure and Optimal Porosity Gradient Distribution Based on Root-Shaped Implants

  • Lijian Liu,
  • Shaobo Ma,
  • Yongkang Zhang,
  • Shouxiao Zhu and ,
  • Shuxuan Wu,
  • Guang Liu and
  • Guang Yang
  • + 2 authors+ 0 author

29 February 2024

Porous structures can reduce the elastic modulus of implants, decrease stress shielding, and avoid bone loss in the alveolar bone and aseptic loosening of implants; however, there is a mismatch between yield strength and elastic modulus as well as bi...

  • Article
  • Open Access
5 Citations
3,000 Views
20 Pages

In-Plane Elastic Properties of 3D-Printed Graded Hierarchical Hexagonal Honeycombs

  • Yong Tao,
  • Ruochao Zhao,
  • Jun Shi,
  • De Zhou and
  • Yanqun Han

21 March 2024

In this study, the graded hierarchical hexagonal honeycomb (GHHH) integrating gradient design and hierarchical design was fabricated using the 3D-printing technique, and its in-plane elastic properties were investigated theoretically, experimentally,...

(This article belongs to the Special Issue Multifunctional Polymers and Their Composites and Structures: Design, Preparation and Properties)
  • Article
  • Open Access
5 Citations
3,035 Views
22 Pages

19 April 2021

In this article, sources of information in electronic states are reexamined and a need for the resultant measures of the entropy/information content, combining contributions due to probability and phase/current densities, is emphasized. Probability d...

(This article belongs to the Special Issue Entropic and Complexity Measures in Atomic and Molecular Systems)
  • Article
  • Open Access
452 Views
18 Pages

7 September 2026

Titanium alloy bone scaffolds have been widely used in the clinical treatment of bone defects. However, conventional titanium alloy bone scaffolds exhibit a lack of porous structure and excessively high elastic modulus, resulting in poor osseointegra...

(This article belongs to the Special Issue Bioinspired Biomaterials for Tissue Engineering and Regenerative Medicine)
  • Article
  • Open Access
1 Citations
1,944 Views
11 Pages

High-Intensity Physical Activity During Late Adolescence Predicts Young Adult CT-Based Finite Element Bone Strength in Emerging Adulthood: Iowa Bone Development Study

  • Soyang Kwon,
  • Kathleen F. Janz,
  • Indranil Guha,
  • Alex V. Rowlands and ,
  • Oscar Rysavy,
  • Punam K. Saha,
  • Chandler Pendleton,
  • Euisung D. Shin and
  • Steven M. Levy
  • + 4 authors+ 0 author

9 September 2025

Objective: This study investigated associations between physical activity (PA) during late adolescence and emerging adulthood and bone strength in emerging adulthood by utilizing advanced finite element analysis of computed tomography (CT/FEA) techno...

(This article belongs to the Special Issue Physical Fitness and Health in Adolescents)
  • Article
  • Open Access
4 Citations
1,510 Views
24 Pages

Damage Evolution and Lifetime Prediction of Cement Asphalt Mortar Under High-Speed Train Frequency and Temperature Gradient Load

  • Mingjie Zhou,
  • Shenghua Zhong,
  • Yiping Liu,
  • Zejia Liu and ,
  • Bao Yang,
  • Zhenyu Jiang,
  • Licheng Zhou and
  • Liqun Tang
  • + 3 authors+ 0 author

25 February 2025

Severe damage to cement asphalt mortar (CA mortar) can compromise the stability and safety of high-speed railway operations due to various complex factors during service. The loads from high-speed trains and temperature gradients within the ballastle...

(This article belongs to the Special Issue Advanced Road Materials and Pavement Engineering: Design, Structure, Performance and Characterization)
  • Article
  • Open Access
150 Citations
13,875 Views
11 Pages

The Mechanical Properties and Elastic Anisotropies of Cubic Ni3Al from First Principles Calculations

  • Xinghe Luan,
  • Hongbo Qin,
  • Fengmei Liu,
  • Zongbei Dai and ,
  • Yaoyong Yi and
  • Qi Li
  • + 1 author+ 0 author

25 July 2018

Ni3Al-based superalloys have excellent mechanical properties which have been widely used in civilian and military fields. In this study, the mechanical properties of the face-centred cubic structure Ni3Al were investigated by a first principles study...

  • Article
  • Open Access
11 Citations
3,002 Views
15 Pages

18 October 2023

Before conducting pavement rehabilitation, the concrete pavement performance evaluation is more than necessary to assess the strength and analyze the internal condition. To evaluate the modulus performance of concrete pavement and provide theoretical...

(This article belongs to the Section Civil Engineering)
  • Communication
  • Open Access
9 Citations
3,177 Views
14 Pages

12 June 2022

Recently, intelligent reflecting surfaces (IRSs) have drawn huge attention as a promising solution for 6G networks to enhance diverse performance metrics in a cost-effective way. For massive connectivity toward a higher spectral efficiency, we addres...

(This article belongs to the Section Communications)
  • Article
  • Open Access
44 Citations
5,176 Views
19 Pages

Influence of Density Gradient on the Compression of Functionally Graded BCC Lattice Structure

  • Yuxiang Lin,
  • Wentian Shi,
  • Xiaohong Sun,
  • Shuai Liu and ,
  • Jihang Li,
  • Yusheng Zhou and
  • Yifan Han
  • + 2 authors+ 0 author

5 January 2023

In this paper, five grading functional gradient lattice structures with a different density perpendicular to the loading direction were proposed, and the surface morphology, deformation behavior, and compression properties of the functional gradient...

(This article belongs to the Special Issue 3D Printing of Metallic Materials)
  • Article
  • Open Access
14 Citations
5,728 Views
18 Pages

21 January 2019

Functional gradient materials (FGMs) have tremendous potential due to their characteristic advantage of asymptotic continuous variation of their properties. When an FGM is used as a coating material, damage and failure of the interface with the subst...

  • Article
  • Open Access
91 Citations
6,330 Views
20 Pages

5 June 2020

Porous scaffolds with graded open porosity combining a morphology similar to that of bone with mechanical and biological properties are becoming an attractive candidate for bone grafts. In this work, scaffolds with a continuous cell-size gradient wer...

(This article belongs to the Section Porous Materials)
  • Article
  • Open Access
31 Citations
6,950 Views
14 Pages

30 January 2019

Functionally graded material (FGM) can optimize the mechanical properties of composites by designing the spatial variation of material properties. In this paper, the stress distribution of functionally graded panel with a central elliptical hole unde...

(This article belongs to the Special Issue Advances in Mechanical Problems of Functionally Graded Materials and Structures)
  • Article
  • Open Access
6 Citations
1,798 Views
37 Pages

Data-Driven AI Approach for Optimizing Processes and Predicting Mechanical Properties of Boron Nitride Nanoplatelet-Reinforced PLA Nanocomposites

  • Sundarasetty Harishbabu,
  • Joy Djuansjah,
  • P. S. Rama Sreekanth,
  • A. Praveen Kumar and ,
  • Borhen Louhichi,
  • Santosh Kumar Sahu,
  • It Ee Lee and
  • Qamar Wali
  • + 3 authors+ 0 author

9 January 2026

This research explores the optimization of mechanical properties and predictive modeling of polylactic acid (PLA) reinforced with boron nitride nanoplatelets (BNNPs) using data-driven machine learning (ML) models. PLA-BNNP composites were fabricated...

(This article belongs to the Special Issue Emerging Trends in Polymer Engineering: Polymer Connect-2024)
  • Article
  • Open Access
9 Citations
3,507 Views
26 Pages

5 February 2023

New finite element analysis procedures are developed in this study to obtain the precise stress distribution patterns of prestressed composites. Within the FEM procedures, an equivalent thermal method is modified to realize the prestress application,...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
8 Citations
2,324 Views
19 Pages

Sparse Magnetization Vector Inversion Based on Modulus Constraints

  • Yang Ou,
  • Qingtian Lü,
  • Jie Zhang,
  • Yi Yang and ,
  • Dingyu Jia,
  • Yang Li,
  • Jinghong Zhai and
  • Zhengzhong Jiang
  • + 3 authors+ 0 author

10 February 2025

Magnetization vector inversion (MVI) is an effective method for simultaneously determining the distribution of magnetization intensity and direction without knowing the direction of magnetization beforehand. Nevertheless, the presence of serious non-...

(This article belongs to the Section Environmental Remote Sensing)
  • Article
  • Open Access
536 Views
23 Pages

Enhancing the Mechanical Properties of Carbon Fiber/Epoxy Composites by Constructing a “Three-Dimensional Nanospider Web” Rigid–Flexible Interface Layer

  • Xiaoda Wei,
  • Yi Bian,
  • Kang Jin,
  • Ruiling Lv and ,
  • Wenkang Yi,
  • Ruina Ma,
  • Xue Zhao and
  • Mingxu Yang
  • + 3 authors+ 0 author

30 August 2026

To enhance the mechanical properties of carbon-fiber-reinforced polymer composites (CFRPs), this study devised a novel three-dimensional web-like “rigid–flexible” surface modification strategy. The synergistic incorporation of carbo...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
23 Citations
6,598 Views
18 Pages

Effect of Cell Geometry on the Mechanical Properties of 3D Voronoi Tessellation

  • Zainab Alknery,
  • Zhwan Dilshad Ibrahim Sktani and
  • Ali Arab

16 December 2022

Irregular 3D biological scaffolds have been widely observed in nature. Therefore, in the current work, new designs are proposed for lightweight 3D scaffolds based on Voronoi tessellation with high porosity. The proposed designs are inspired by nature...

  • Article
  • Open Access
383 Views
20 Pages

17 August 2026

Frozen soil on alpine slopes is influenced by inclination and aspect-induced differential solar radiation effects, resulting in non-uniform temperature fields and inclined layered ice lenses that enhance anisotropy and degrade mechanical properties....

(This article belongs to the Special Issue Advances in Disaster Prevention and Resilience for Cold Regions Engineering)
  • Article
  • Open Access
3 Citations
3,148 Views
22 Pages

Impact of B and P Doping on the Elastic Properties of Si Nanowires

  • Nedhal Ali Mahmood Al-Nuaimi,
  • Angela Thränhardt and
  • Sibylle Gemming

25 January 2025

Using gradient-corrected density functional theory we investigate the mechanical properties of ultrathin boron (B) and phosphorus (P) doped silicon nanowires (SiNWs) along the [001] and [111] orientations within the PBE approximation. Both pristine a...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
37 Citations
3,872 Views
16 Pages

2 September 2022

An optimized “rigid-flexible” structure with multistage gradient modulus was constructed on carbon fiber (CF) surface via chemical grafting using “flexible” polyethyleneimine (PEI) and “rigid” polydopamine (PDA) be...

  • Article
  • Open Access
9 Citations
2,866 Views
15 Pages

Rainfall Runoff and Nitrogen Loss Characteristics on the Miyun Reservoir Slope

  • Na Wang,
  • Lei Wang,
  • Liang Jin,
  • Jiajun Wu and ,
  • Min Pang,
  • Dan Wei,
  • Yan Li,
  • Junqiang Wang,
  • Ting Xu and
  • Jianzhi Xie
  • + 6 authors+ 1 author

6 March 2024

Rainfall intensity and slope gradient are the main drivers of slope surface runoff and nitrogen loss. To explore the distribution of rainfall runoff and nitrogen loss on the Miyun Reservoir slopes, we used artificial indoor simulated rainfall experim...

(This article belongs to the Special Issue Effects of Hydrology on Soil Erosion and Soil Conservation)
  • Article
  • Open Access
10 Citations
3,380 Views
18 Pages

16 January 2023

Based on the spectral element method (SEM) and a convolutional neural network (CNN), an inversion algorithm for the dynamic modulus of concrete pavement structures is proposed in this paper. In order to evaluate the service performance of pavement st...

(This article belongs to the Topic Advances in Non-Destructive Testing Methods)
  • Article
  • Open Access
2 Citations
2,438 Views
21 Pages

Prediction on Slip Modulus of Screwed Connection for Timber–Concrete Composite Structures Based on Machine Learning

  • Wen-Wu Lu,
  • Yu-Wei Chen,
  • Ji-Gang Xu,
  • Hui-Feng Yang and ,
  • Hao-Tian Tao,
  • Wei Zheng and
  • Ben-Kai Shi
  • + 2 authors+ 0 author

13 July 2025

Screwed connections are widely adopted in timber–concrete composite (TCC) structures. Owing to the diverse connection configurations and complex shear mechanisms, existing empirical models or theoretical formulas cannot accurately and efficient...

(This article belongs to the Special Issue Performance Analysis of Timber Composite Structures)
  • Article
  • Open Access
22 Citations
4,817 Views
18 Pages

Study on the Anisotropy of Triply Periodic Minimal Surface Porous Structures

  • Mingkang Zhang,
  • Jinwei Li,
  • Chang Liu,
  • Mingjian Deng and ,
  • Xing Liao and
  • Di Wang
  • + 1 author+ 0 author

5 July 2023

Because their topological structures have certain crystallographic symmetry, there is anisotropy in triply periodic minimal surface (TPMS) porous structures. Anisotropy can affect the mechanical properties of porous structures; thus, it is necessary...

(This article belongs to the Special Issue Recent Development in Post-processing for Additive Manufacturing)
  • Article
  • Open Access
9 Citations
3,810 Views
11 Pages

Morphologies, Young’s Modulus and Resistivity of High Aspect Ratio Tungsten Nanowires

  • Jianjun Gao,
  • Jian Luo,
  • Haibin Geng,
  • Kai Cui and ,
  • Zhilong Zhao and
  • Lin Liu
  • + 1 author+ 0 author

25 August 2020

High aspect ratio tungsten nanowires have been prepared by selective dissolution of Nickel-aluminum-tungsten (NiAl−W) alloys which were directionally solidified at growth rates varying from 2 to 25 μm/s with a temperature gradient of 300 K&m...

(This article belongs to the Special Issue Manufacturing and Mechanics of Materials)

of 9