Skip to Content

562 Results Found

  • Review
  • Open Access
6 Citations
4,135 Views
22 Pages

How Traditional Costing Methods Hinder the Development of Modular Product Architectures

  • Morten Nørgaard,
  • Jakob Meinertz Grønvald,
  • Carsten Keinicke Fjord Christensen and
  • Niels Henrik Mortensen

4 June 2025

This study investigates how traditional costing methods hinder the development of modular product architectures. A structured literature review identifies the gap between Management Accounting (MA) and Innovation and Operations Management (IOM), reve...

(This article belongs to the Special Issue Feature Review Papers in Section Applied Industrial Technologies)
  • Article
  • Open Access
4 Citations
4,437 Views
22 Pages

A Model-Based Approach for the Methodical Development and Configuration of Modular Product Families

  • Michael Hanna,
  • Lea-Nadine Wöller,
  • Florian M. Dambietz and
  • Dieter Krause

31 August 2023

This paper shows how a methodical development and configuration of modular product family concepts and their effects on economic targets can be implemented in SysML. For this purpose, different sources of inconsistency between different methodical to...

(This article belongs to the Special Issue Model-Based Systems Engineering: From Design to Practical Systems Engineering)
  • Article
  • Open Access
4 Citations
4,023 Views
25 Pages

Development of Modular Architectures for Product–Service Systems

  • Christoph Rennpferdt,
  • Marc Zuefle,
  • Marco Bagusat,
  • Dennis Bender and
  • Dieter Krause

21 September 2023

Driven by servitization, an increasing number of manufacturing companies are transforming from being a pure product provider to a provider of Product–Service Systems (PSS). PSS offer unique benefits to both providers and customers by combining...

(This article belongs to the Section Sustainable Products and Services)
  • Article
  • Open Access
7 Citations
3,345 Views
20 Pages

An Evolutionary Modular Product Development Under Circular Economy Approach

  • Antonio Córdoba-Roldán,
  • Alejandro M. Martín-Gómez,
  • Marina Rodríguez-Núñez and
  • Juan Ramón Lama-Ruiz

5 December 2024

The incorporation of new technologies and materials, as well as the rapid evolution of products, makes it necessary to guide the product design and development process from bio-inspired perspectives that promote a circular economy. Among the proposal...

(This article belongs to the Section Waste and Recycling)
  • Article
  • Open Access
1,677 Views
24 Pages

27 May 2026

The fashion industry generates significant environmental impact through overproduction and the short life cycles of clothing products. Modular design, which allows multiple wearing configurations from a single product through removable and interchang...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
6 Citations
6,318 Views
22 Pages

In this paper, we propose a set of rules for developing modular architectures. We first consider the well-known concept of “Design Rules” advanced by Baldwin and Clark. We then propose a broader conceptualization called “Modularity...

  • Article
  • Open Access
875 Views
43 Pages

Towards a Unified Engineering Approach for Variability and Modular Architecture Management in Automotive Systems

  • Fabian Goihl,
  • Yannick Lindebauer,
  • Richard von Esebeck,
  • Jivka Ovtcharova and
  • Thomas Vietor

27 July 2026

Automotive systems are experiencing a rapid increase in complexity driven by the transition towards software-defined vehicles, autonomous functionalities and increasingly interconnected E/E architectures. This transformation intensifies variability a...

(This article belongs to the Special Issue Model-Based Systems Engineering (MBSE) for Complex Systems)
  • Article
  • Open Access
1 Citations
1,364 Views
23 Pages

The Product Variety Costing Method (PVCM): A Data-Driven Approach to Resource Allocation and Cost Evaluation

  • Morten Nørgaard,
  • Jakob Meinertz Grønvald,
  • Carsten Keinicke Fjord Christensen and
  • Niels Henrik Mortensen

12 December 2025

This study introduces the Product Variety Costing Method (PVCM), a data-driven framework that addresses the limitations of existing costing approaches, which fail to accurately present the cost of product and part variety, thereby constraining cost-i...

(This article belongs to the Special Issue Assessing New Trends in Sustainable and Smart Manufacturing)
  • Article
  • Open Access
23 Citations
7,218 Views
15 Pages

31 March 2021

Due to the impact of globalization, the competition between enterprises has become fierce and led the supply chains of many industries to be reorganized. One of the consequences is that the operation of many small and medium enterprises (SMs) had bec...

(This article belongs to the Collection Tools, Approaches and Modeling in Sustainable Supply Chain Management)
  • Article
  • Open Access
7 Citations
3,568 Views
15 Pages

19 November 2023

The building industry faces a number of prominent challenges in the coming period. In this article, we focus on productivity in construction, which lags behind other industries despite technological developments. There is an urgent need for more effi...

(This article belongs to the Section Construction Management, and Computers & Digitization)
  • Article
  • Open Access
1 Citations
1,488 Views
21 Pages

22 March 2025

To enhance the adaptability and disassemblability of winter ice fishing safety auxiliary products, a modular design approach was introduced during the design process. Axiomatic design (AD) and design structure matrix (DSM) were employed as the theore...

(This article belongs to the Special Issue Intelligent Data Processing and Management: Technologies and Applications)
  • Article
  • Open Access
1 Citations
1,767 Views
28 Pages

The environment of today’s companies is marked by increasing dynamism. Rapid technological developments, strong innovation impulses, and continual market entry of new competitors create volatile conditions that make the delivery of valuable pro...

(This article belongs to the Section Industrial and Manufacturing Engineering)
  • Article
  • Open Access
11 Citations
3,238 Views
11 Pages

9 April 2021

Increasing global competition, volatile markets and the demand for individual products challenge companies in almost all business sectors and require innovative solutions. In the chemical and pharmaceutical industries, these include modular design, t...

  • Article
  • Open Access
8 Citations
5,175 Views
15 Pages

7 November 2019

Digital tools have become indispensable for the testing and modification of prototypes in mobile and industrial machine manufacturing. Data that are extracted from virtual experimentation and analysis are both affordable and valuable, due to their re...

  • Article
  • Open Access
1 Citations
3,088 Views
25 Pages

26 November 2025

Companies in asset-intensive industries, such as aviation and railways, face unique digital transformation challenges due to the misalignment between the rapid evolution of digital technologies and decades-long asset lifecycles. Existing innovation f...

  • Feature Paper
  • Article
  • Open Access
6 Citations
1,659 Views
31 Pages

The Development and Evaluation of a Low-Emission, Fuel-Flexible, Modular, and Interchangeable Solid Oxide Fuel Cell System Architecture for Combined Heat and Power Production: The SO-FREE Project

  • Enrico Bocci,
  • Alessandro Dell’Era,
  • Carlo Tregambe,
  • Giacomo Tamburrano and ,
  • Vera Marcantonio and
  • Francesca Santoni
  • + 1 author+ 0 author

29 April 2025

Within the framework of the SOCIETAL CHALLENGES—Secure, Clean, and Efficient Energy objective under the European Horizon 2020 research and innovation funding program, the SO-FREE project has developed a future-ready solid oxide fuel cell (SOFC)...

  • Article
  • Open Access
2 Citations
1,611 Views
22 Pages

21 February 2025

Production using modular architecture can not only shorten the product development cycle and improve the efficiency of product development, but also facilitate the upgrading of a product’s main functions and the recycling of materials. However,...

(This article belongs to the Special Issue Design and Optimization of Manufacturing Systems, 2nd Edition)
  • Article
  • Open Access
14 Citations
10,543 Views
29 Pages

Modular Product Architecture for Sustainable Flexible Manufacturing in Industry 4.0: The Case of 3D Printer and Electric Toothbrush

  • Tufail Habib,
  • Muhammad Omair,
  • Muhammad Salman Habib,
  • Muhammad Zeeshan Zahir and ,
  • Sikandar Bilal Khattak,
  • Se-Jin Yook,
  • Muhammad Aamir and
  • Rehman Akhtar
  • + 3 authors+ 0 author

4 January 2023

Integrating sustainability, a flexible manufacturing system, and Industry 4.0 resolves the issues of fluctuating market demand arising from customization requirements. Modular products allow flexibility to adapt to changing requirements and optimize...

(This article belongs to the Special Issue EcoDesign: The Importance of Manufacturing Sustainable Products)
  • Feature Paper
  • Article
  • Open Access
30 Citations
9,220 Views
23 Pages

Modular construction has been gaining increasing attention from industry and academia as a solution to the limitations of the traditional on-site orient production systems in the construction industry. Various attempts have been made to improve modul...

(This article belongs to the Topic Advances in Construction and Project Management)
  • Article
  • Open Access
20 Citations
11,898 Views
24 Pages

25 May 2024

Small- and medium-sized manufacturing enterprises (SMMEs) face intense competitiveness, necessitating ever greater productivity. Enterprises struggle to meet the demand for customized products while maintaining their productivity. The transition from...

(This article belongs to the Special Issue Digital and Sustainable Manufacturing in Industry 4.0)
  • Article
  • Open Access
46 Citations
8,861 Views
19 Pages

Adopting Product Modularity in House Building to Support Mass Customisation

  • Cecília G. da Rocha,
  • Carlos T. Formoso and
  • Patrícia Tzortzopoulos

24 April 2015

Product modularity is a concept that can contribute to the improvement of product quality and production efficiency in house-building. However, there is a lack of consensus in the literature on the concepts that define product modularity. Furthermore...

(This article belongs to the Special Issue ZEMCH Research Initiatives: Mass Customisation and Sustainability)
  • Feature Paper
  • Article
  • Open Access
9 Citations
5,094 Views
14 Pages

11 November 2021

Modular design is the design based on independent and connectable modules to achieve product variety. It is an ideal tool that could facilitate the inclusion of prosumers in the creative process. However, its evolution has focused on product developm...

(This article belongs to the Special Issue New Trends in Design Engineering II)
  • Article
  • Open Access
41 Citations
8,528 Views
22 Pages

Optimization of Prefabricated Components in Housing Modular Construction

  • Sunghoon Nam,
  • Jongsik Yoon,
  • Kyungrai Kim and
  • Byungjoo Choi

9 December 2020

In modular construction—a type of industrialized construction—production planning is very important, as it is closely related to the project’s duration, quality, and sustainability. The constraints (production area, delivery due dat...

(This article belongs to the Section Green Building)
  • Article
  • Open Access
3 Citations
1,679 Views
8 Pages

Impact of electromobility on automotive architectures

  • Martin Luccarelli,
  • Dominik Matt and
  • Pasquale Russo Spena

The introduction of alternative powertrain technologies has brought increased design freedom in spaces within a vehicle that were previously constrained by traditional ones. Such freedom will affect the overall architecture and appearance of future a...

  • Article
  • Open Access
26 Citations
11,839 Views
18 Pages

20 February 2019

Modular construction, which involves factory-based modular unit manufacturing followed by installation at a construction site, has been recognized as one of the sustainable construction methods. Its advantages are known to be implemented through (1)...

(This article belongs to the Special Issue Sustainable Habitat)
  • Article
  • Open Access
5 Citations
1,873 Views
23 Pages

European Green Deal: Substantiation of the Rational Configuration of the Bioenergy Production System from Organic Waste

  • Inna Tryhuba,
  • Anatoliy Tryhuba,
  • Taras Hutsol,
  • Szymon Szufa and ,
  • Szymon Glowacki,
  • Oleh Andrushkiv,
  • Roman Padyuka,
  • Oleksandr Faichuk and
  • Nataliia Slavina
  • + 4 authors+ 0 author

9 September 2024

A review of the current state of the theory and practice of bioenergy production from waste allowed us to identify the scientific and applied problem of substantiating the rational configuration of a modular anaerobic bioenergy system, taking into ac...

(This article belongs to the Section A4: Bio-Energy)
  • Article
  • Open Access
24 Citations
3,885 Views
27 Pages

Knowledge-Based Decision Support for Concept Evaluation Using the Extended Impact Model of Modular Product Families

  • Erik Greve,
  • Christoph Fuchs,
  • Bahram Hamraz,
  • Marc Windheim and ,
  • Christoph Rennpferdt,
  • Lea-Nadine Schwede and
  • Dieter Krause
  • + 2 authors+ 0 author

6 January 2022

The design of modular product families enables a high external variety of products by a low internal variety of components and processes. This variety optimization leads to large economic savings along the entire value chain. However, when designing...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
1 Citations
1,178 Views
12 Pages

The module division scheme of commercial aircraft and other complex system products has a significant impact on the functionality, performance, and cost of the aircraft. To obtain scientifically rational modular division solutions for commercial airc...

(This article belongs to the Section Aeronautics)
  • Proceeding Paper
  • Open Access
339 Views
9 Pages

Design of Modular Mold for Injection Molding of Small-Sized Nonmetal Parts

  • Anna-Maria Lazarova,
  • Stiliyan Nikolov and
  • Reneta Dimitrova

3 September 2026

The article analyzes the design of molds for the production of nonmetallic parts by injection molding. Based on the analysis on an existing mold, a mold with a modular design was developed in environment of the SolidWorks Version 2022 CAD system. The...

(This article belongs to the Proceedings of The International Conference on Electronics, Engineering Physics and Earth Science (EEPES2026))
  • Article
  • Open Access
1 Citations
1,166 Views
34 Pages

23 January 2026

This paper reports part of the research results carried out within the National Centre for Sustainable Mobility (MOST—CN4)—Spoke 5 “Light Vehicle and Active Mobility”—funded by the Italian National Recovery and Resilienc...

(This article belongs to the Special Issue Sustainable Urban Mobility)
  • Article
  • Open Access
2 Citations
1,885 Views
17 Pages

15 December 2024

The Chinese government is actively restructuring transportation to shift towards more sustainable rail freight transportation (RFT); however, there is still a lack of more systematic optimization in the whole production chain. This study develops a d...

(This article belongs to the Section E: Applied Mathematics)
  • Article
  • Open Access
981 Views
23 Pages

New Results About Aggregation Functions of Quasi-Pseudometric Modulars

  • Alejandro Fructuoso-Bonet and
  • Jesús Rodríguez-López

28 February 2025

In recent studies, Bibiloni-Femenias, Miñana, and Valero characterized the functions that aggregate a family of (quasi-)(pseudo)metric modulars defined over a fixed set X into a single one. In this paper, we adopt a related but different appro...

(This article belongs to the Special Issue Topological Study on Fuzzy Metric Spaces and Their Generalizations)
  • Article
  • Open Access
18 Citations
12,154 Views
11 Pages

In recent years, modularization of chemical production plants has become a widely discussed trend to overcome some of key issues the chemical industry struggles with. High volatility in raw material and customer markets, shorter product life cycles,...

(This article belongs to the Special Issue Progress in Thermal Process Engineering)
  • Article
  • Open Access
7 Citations
2,620 Views
24 Pages

19 June 2024

The purpose of this paper is to investigate the economic sustainability implications of reconfigurable modularization and changeability in semi-automatic assembly systems using a system dynamics perspective. Through our applied research, using a mult...

(This article belongs to the Topic Advanced Systems Engineering: Theory and Applications, 2nd Volume)
  • Article
  • Open Access
1 Citations
3,029 Views
34 Pages

5 October 2025

Currently, the global construction industry is facing challenges of stagnant efficiency and cost overruns. The potential of modular construction has not been fully unleashed due to the disconnection between design and manufacturing. This paper propos...

(This article belongs to the Special Issue Advances in Modern Structural Engineering: From Materials to Building Structures)
  • Article
  • Open Access
23 Citations
4,356 Views
21 Pages

31 December 2021

Modular architecture is very conducive to the development, maintenance, and upgrading of electromechanical products. In the initial stage of module division, the design structure matrix (DSM) is a crucial measure to concisely express the component re...

(This article belongs to the Special Issue Symmetry in Industrial Engineering)
  • Perspective
  • Open Access
43 Citations
10,004 Views
20 Pages

Modularisation Strategies for Individualised Precast Construction—Conceptual Fundamentals and Research Directions

  • Lothar Kolbeck,
  • Daria Kovaleva,
  • Agemar Manny,
  • David Stieler and ,
  • Martin Rettinger,
  • Robert Renz,
  • Zlata Tošić,
  • Tobias Teschemacher,
  • Jan Stindt and
  • Peter Mark
  • + 15 authors+ 10 authors

15 December 2023

Modular precast construction is a methodological approach to reduce environmental impacts and increase productivity when building with concrete. Constructions are segmented into similar precast concrete elements, prefabricated with integrated quality...

(This article belongs to the Section Civil Engineering Design)
  • Article
  • Open Access
8 Citations
3,861 Views
32 Pages

HOLOTWIN: A Modular and Interoperable Approach to Holographic Telepresence System Development

  • Ivaylo Bozhilov,
  • Radostina Petkova,
  • Krasimir Tonchev,
  • Agata Manolova and
  • Vladimir Poulkov

24 October 2023

In the field of holographic-type communication (HTC), this paper presents a comprehensive exploration of existing technologies and proposes a novel, modular architecture for holographic telepresence systems (HTPSs). We substantiate our architectural...

(This article belongs to the Section Communications)
  • Article
  • Open Access
12 Citations
8,847 Views
24 Pages

Exploring an AM-Enabled Combination-of-Functions Approach for Modular Product Design

  • Charul Chadha,
  • Kathryn A. Crowe,
  • Christina L. Carmen and
  • Albert E. Patterson

16 October 2018

This work explores an additive-manufacturing-enabled combination-of-function approach for design of modular products. AM technologies allow the design and manufacturing of nearly free-form geometry, which can be used to create more complex, multi-fun...

(This article belongs to the Special Issue Design and Applications of Additive Manufacturing and 3D Printing)
  • Article
  • Open Access
16 Citations
5,330 Views
24 Pages

Development of a Novel Retrofit Framework Considering Industry 4.0 Concepts: A Case Study of a Modular Production System

  • Rafael S. Mendonca,
  • Mariélio da Silva,
  • Florindo A. C. Ayres,
  • Iury V. Bessa and ,
  • Renan L. P. Medeiros and
  • Vicente F. Lucena
  • + 1 author+ 0 author

7 January 2025

Retrofitting legacy systems provides significant advantages by addressing compatibility issues with new devices and technologies, meeting current process requirements, and increasing security and regulatory compliance. The process starts by collectin...

(This article belongs to the Section AI-Enabled Process Engineering)
  • Article
  • Open Access
8 Citations
5,245 Views
18 Pages

An Iterative Conceptual Design Process for Modular Product Based on Sustainable Analysis and Creative Template Method

  • Junyu Zhou,
  • Miao Yu,
  • Wu Zhao,
  • Kai Zhang and ,
  • Jun Chen and
  • Xin Guo
  • + 1 author+ 0 author

31 May 2022

The iterative design process of mechanical products has evolved towards a more sustainable direction driven by the concept of sustainable development. Modular design emphasizes the realization of user requirements under the condition of high efficien...

(This article belongs to the Special Issue Advances in Digital Design and Manufacturing)
  • Article
  • Open Access
8 Citations
3,181 Views
23 Pages

14 September 2023

Currently, modular building is undergoing vigorous development in China, and has provided a significant advantage in many fields, but its quality is difficult to guarantee. The key is to improve the design process, shorten the development cycle, and...

(This article belongs to the Section Construction Management, and Computers & Digitization)
  • Article
  • Open Access
56 Citations
10,969 Views
17 Pages

17 October 2017

It is widely known that industrialized building systems can positively impact construction projects in terms of efficiency, duration, safety, and quality. Although the use of industrialized building systems can potentially simplify the production pro...

(This article belongs to the Special Issue Selected Papers from ZEMCH 2016: Building Energy Performance Evaluation/Simulation)
  • Article
  • Open Access
1 Citations
614 Views
21 Pages

24 May 2026

The increasing number of end-of-life (EOL) products has raised new challenges for sustainable manufacturing, especially when recycling efficiency, structural modularity and worker well-being must be considered simultaneously. From the perspective of...

(This article belongs to the Special Issue Advanced Materials, Structures, Symmetrical Design and Mechanism in Mechanical Engineering, 2nd Edition)
  • Article
  • Open Access
4 Citations
6,275 Views
16 Pages

Design of a Modular Energy Production–Storage System for a Sustainable Bicycle

  • José S. Velázquez,
  • Francisco Cavas,
  • Juan A. Valverde-Martínez and
  • Juan Ignacio Mulero-Martínez

7 January 2024

This paper presents a new concept of a modular system for the production and storage of energy in a bicycle at any speed above 9 km/h. User-Centered Design methodology was applied to establish the design premises, and then each component of the modul...

  • Article
  • Open Access
5 Citations
2,980 Views
28 Pages

Modular Buildings as a Potential for Small Trade Development in a Sustainable City

  • Monika Siewczyńska,
  • Borys Siewczyński,
  • Agnieszka Grzelczak,
  • Anna Szymczak-Graczyk and
  • Barbara Ksit

28 June 2025

The development of retail stores is determined by many factors, including the availability of retail space. The construction of a new building requires time, resources, and permits. This article aims to examine the possibilities of implementing small...

  • Article
  • Open Access
11 Citations
6,331 Views
17 Pages

Modular Hardware Architecture for the Development of Underwater Vehicles Based on Systems Engineering

  • Luis M. Aristizábal,
  • Carlos A. Zuluaga,
  • Santiago Rúa and
  • Rafael E. Vásquez

This paper addresses the development of a modular hardware architecture for the design/construction/operation of a remotely operated vehicle (ROV), based on systems engineering. The Vee model is first presented as a sequential process that emphasizes...

(This article belongs to the Special Issue Unmanned Marine Vehicles II)
  • Article
  • Open Access
3 Citations
2,851 Views
24 Pages

21 February 2025

Production changes enabled by Industry 4.0 (I4.0) allow industries to respond to customer needs in a much more precise and agile manner. It also permits companies to focus on the development of sustainable and more efficient solutions. The energy sec...

  • Article
  • Open Access
15 Citations
6,471 Views
18 Pages

31 December 2024

The growing demand for sustainable and efficient construction practices has led to an increased interest in modular construction, with design for manufacture and assembly emerging as a pivotal approach. Despite its potential, the integration of desig...

(This article belongs to the Collection Buildings for the 21st Century)
  • Article
  • Open Access
19 Citations
5,072 Views
19 Pages

A Sustainable Application Based on Grouping Genetic Algorithm for Modularized Redesign Model in Apparel Reverse Supply Chain

  • Manoj Kumar Paras,
  • Lichuan Wang,
  • Yan Chen,
  • Antonela Curteza and ,
  • Rudrajeet Pal and
  • Daniel Ekwall
  • + 1 author+ 0 author

24 August 2018

The scarcity of natural resources and the problem of pollution have initiated the need for extending the life and use of existing products. The concept of the reverse supply chain provides an opportunity to recover value from discarded products. The...

of 12