A Point-of-Care system for molecular diagnosis (PoC-MD) is described, combining GaN and CMOS chips. The device is a micro-system for fluorescence measurements, capable of analyzing both intensity and lifetime. It consists of a hybrid micro-structure...
Previous studies have shown that the external quantum efficiency (EQE) of conventional red Micro-Light emitting diodes(Micro-LEDs) decreases markedly with reducing chip size. This degradation is generally attributed to enhanced non-radiative recombin...
In this paper, the edge strain relaxation of InGaN/GaN MQW micro-pillars is studied. Micro-pillar arrays with a diameter of 3–20 μm were prepared on a blue GaN LED wafer by inductively coupled plasma (ICP) etching. The peak wavelength shift...
Pinhole‐shaped light‐emitting diode (LED) arrays with dimension ranging from 100 μm down to 5 μm have been developed as point illumination sources. The proposed microLED arrays, which are based on gallium nitride (GaN) technology and emitting in the...
Micro-LED arrays exhibit high brightness, a long lifespan, low power consumption, and a fast response speed. In this paper, we have proposed a series-biased micro-LED array by using a nitride layer with multi-quantum wells epitaxial on sapphire subst...
Color-converted micro-LED displays consist of a mono-color micro-LED array and color conversion materials to achieve full color, while relieving the burden of epitaxial growth of three-color micro-LEDs. However, it usually suffers from low efficiency...
Monolithic micro LED display arrays show potential for application in small-area display modules, such as augmented reality (AR) displays. Due to the short distance between micro LEDs and the monolithic transparent substrate, a light crosstalk phenom...
Color-converted micro-LED displays consisting of mono-blue-colored micro LED arrays and color-conversion materials have been used to achieve full color while reliving the transfer and epitaxial growth of three different-colored micro LEDs. An efficie...
This work proposes the use of integrated high-power InGaN/GaN multiple-quantum-well flip-chip blue micro light-emitting diode (μ-LED) arrays on an AlGaN/GaN-based heterojunction field-effect transistor (HFET), also known as a high electron mobility t...
This work explores the pivotal role of laser lift-off (LLO) as a vital production process in facilitating the integration of Micro-LEDs into display modules. We specifically investigate the LLO process applied to high-performance gallium nitride (GaN...
Wafer-scale blue micro-light-emitting diode (micro-LED) arrays were fabricated with a pixel size of 12 μm, a pixel pitch of 15 μm, and a pixel density of 1692 pixels per inch, achieved by optimizing the properties of e-beam-deposited and sputte...
In this work, we demonstrate high-efficiency 385 nm AlGaN-based near-ultraviolet micro light emitting diode (NUV-Micro LED) arrays. The epi structure is prepared using a novel AlN-inserted superlattice electrical blocking layer which enhances hole sp...
This paper presents the design of a 40 × 40 micro-light-emitting (micro-LED) test array based on a 20 mm × 20 mm substrate. A study of the relationship between luminous brightness, driving current, and driving voltage revealed that the da...
Micro-scale light emitting diodes (micro-LEDs) commonly employ a thin-film flip-chip (TFFC) structure whose substrate is lifted off by an excimer laser. However, flip-chip (FC) micro-LEDs with a substrate can provide a sharp rise on sidewall emission...
Micro-LED display technology has been considered a promising candidate for near-eye display applications owing to its superior performance, such as having high brightness, high resolution, and high contrast. However, the realization of polarized and...
The autostereoscopic display is a promising way towards three-dimensional-display technology since it allows humans to perceive stereoscopic images with naked eyes. However, it faces great challenges from low resolution, narrow viewing angle, ghost i...
Quantum dot (QD)-based RGB micro-LED technology is seen as one of the most promising approaches towards full color micro-LED displays. In this work, we present a novel nanoporous GaN (NP-GaN) structure that can scatter light and host QDs, as well as...
This paper proposes a Field Programmable Gate Array (FPGA)-based control system to implement micro-light-emitting diode (micro-LED) real-time display. The control system includes the interface control, video processing, memory management, image data...
Compared with conventional display technologies, liquid crystal display (LCD), and organic light emitting diode (OLED), micro-LED displays possess potential advantages such as high contrast, fast response, and relatively wide color gamut, low power c...
To enable multi-channel parallel spectral analysis in array-based devices such as micro-light-emitting diodes (Micro-LEDs) and line-scan spectral confocal systems, the development of compact array spectrometers has become increasingly important. In t...
In this article, an active matrix (AM) micro light-emitting diode (MicroLED) display with a resolution of 1920 × 1080 and a high pixel density of 3200 pixels per inch (ppi) is reported. The single pixel with a diameter of 5 μm on the MicroLE...
We describe a CMOS-based micro-system for time-resolved fluorescence lifetime analysis. It comprises a 16 × 4 array of single-photon avalanche diodes (SPADs) fabricated in 0.35 μm high-voltage CMOS technology with in-pixel time-gated photon counting...
Guidelines for the fabrication of nanoscale light-emitting diode arrays (i.e., nanoLED arrays) based on patterned gallium nitride (GaN) with very small dimensions and pitches have been derived in this work. Several challenges during top-down LED arra...
A much simplified method for transferring Gallium nitride (GaN) light emitting didoes (LEDs) to an unusual substrate, such as glass, Si, polyethylene terephthalate, or polyurethane, was demonstrated with spontaneously formed vertical tethers during c...
This work demonstrated color-conversion layers of red and green quantum dots color filter for full-color display arrays. Ligands exchange using (3-glycidyloxypropyl) trimethoxysilane with epoxy functional groups to treat QDs in the liquid phase was p...
Towards a distributed neural interface, consisting of multiple miniaturized implants, for interfacing with large-scale neuronal ensembles over large brain areas, this paper presents a mm-sized free-floating wirelessly-powered implantable opto-electro...
In this study, we present the development of selective-area porous GaN (SPG) microarrays integrated with embedded quantum dots (QDs) for next-generation display applications. We report a dielectric hard mask-based architecture that withstands high et...
Low-power gas sensors that can be used in IoT (Internet of Things) systems, consumer devices, and point-of-care devices will enable new applications in environmental monitoring and health protection. We fabricated a monolithic chemiresistive gas sens...
InGaN-based micro-structured light-emitting diodes (µLEDs) play a critical role in the field of full-color display. In this work, selected area growth (SAG) of a micro-pyramid LED array was performed on a 2-inch wafer-scale patterned SiO2 template (p...
GaN-based light emitting diodes (LEDs) have been shown to effectively operate down to nanoscale dimensions, which allows further downscaling the chip-based LED display technology from micro- to nanoscale. This brings up the question of what resolutio...
We have demonstrated full-color and white-color micro light-emitting diodes (μLEDs) using InGaN/AlGaN core-shell nanowire heterostructures, grown on silicon substrate by molecular beam epitaxy. InGaN/AlGaN core-shell nanowire μLED arrays were f...
Dopamine (DA) is the key regulator of reward behavior. The DA neurons in the ventral tegmental area (VTA) and their projection areas, which include the prefrontal cortex (PFC), nucleus accumbens (NAc), and amygdala, play a primary role in the process...
To address the critical challenge of excessive junction temperature caused by ultra-high heat flux densities (>100 W/cm2) in deep-sea LED Fish-Attracting Lamp (FAL) arrays, this study proposes a hybrid thermal management scheme integrating interfa...
In this paper, a power-controllable light emitting diode (LED) control system is proposed for plant cultivation. The proposed LED system measures environmental data, such as the distance between the plant and LED system using an infrared sensor and t...
Micro-size light-emitting diodes (μLEDs) are high-brightness, low-power optoelectronic devices with significant potential in display technology, lighting, and biomedical applications. AlGaInP-based red LEDs experience severe size-dependent effects...
Wearable electronics have showed their profound impact in military, sports, medical and other fields, but their large-scale applications are still limited due to high manufacturing costs. As an advanced micro-fabrication process, laser processing tec...
High-definition near-eye display technology has extremely close sight distance, placing a higher demand on the size, performance, and array of light-emitting pixel devices. Based on the excellent photoelectric performance of metal halide perovskite m...
A new LED rear light for automotives is proposed and demonstrated for EU ECE R07 regulation. The full rear light is a combination of a position lamp and a braking lamp, and LED light bars and micro-prisms are involved as their essential components. T...
This paper discusses possible methods for on-chip fluorescent imaging forintegrated bio-sensors. The integration of optical and electro-optical accessories, accordingto suggested methods, can improve the performance of fluorescence imaging. It can bo...
InGaN-based red micro-light-emitting diodes (µLEDs) of different sizes were prepared in this work. The red GaN epilayers were grown on 4-inch sapphire substrates through metal-organic chemical vapor deposition (MOCVD). Etching, sidewall treatment, an...
The triboelectric nanogenerator (TENG) has demonstrated exceptional efficiency in harvesting diverse forms of mechanical energy and converting it into electrical energy. This technology is particularly valuable for powering low-energy electronic devi...
This paper demonstrates a 3D microlithography system where an array of 5 mm Ultra Violet-Light Emitting Diode (UV-LED) acts as a light source. The unit of the light source is a UV-LED, which comes with a length of about 8.9 mm and a diameter of 5 mm....
In this research, we compared the performance of commercial μ-LEDs and three-layered staggered QW μ-LED arrays. We also investigated the self-heating effect. We proposed a green micro-resonant cavity light-emitting diode (µ-RCLED) that co...
Recent findings have identified high-density lipoprotein (HDL) as a carrier of microRNAs, small non-coding RNAs that regulate gene expression, suggesting a potential novel functional and biochemical role for HDL-microRNA cargo. Here, we conduct an in...
The emerging wearable electronics integrated into textiles are posing new challenges both in materials and micro-fabrication strategies to produce textile-based energy storage and power source micro-devices. In this regard, inkjet printing (IJP) offe...
Air pollutants are associated with exacerbations of asthma, chronic bronchitis, and airway inflammation. Diesel exhaust particles (DEPs) can induce and worsen lung diseases. However, there are insufficient data to guide polymerase chain reaction (PCR...
Triboelectric nanogenerators (TENGs) have emerged as viable micro power sources for an array of applications. Since their inception in 2012, TENGs have been the subject of significant advancements in terms of structural design and the development of...
Vertically oriented, self-organized TiO2–MnO2 nanotube arrays were successfully obtained by one-step anodic oxidation of Ti–Mn alloys in an ethylene glycol-based electrolyte. The as-prepared samples were characterized by scanning electron microscopy...
Antimicrobial drugs applied topically offer several advantages. However, the widespread use of antibiotics has led to increasing antimicrobial resistance. One interesting approach in the drug discovery process is drug repurposing. Disulfiram, which w...
Although liquid-repellent surfaces are in demand in many applications, their use is limited by the Cassie state’s sustainability to environmental factors, such as the repellency of liquids with a surface tension lower than that of water. This p...
of 2