This article discusses the problem of vibrations during machining. The manufacturing process of generator turbine blades is highly complex. Machining using Computerized Numerical Control (CNC) requires low cutting parameters in order to avoid vibrati...
A piezoelectric vibration sensing system (PVSS) was devised in this study and employed for the purpose of vibration sensing in machining. The system comprises three primary components, wherein the sensor is utilized for the collection and conversion...
Inconel 718 is widely utilized in critical engineering sectors, particularly aerospace, owing to its exceptional creep resistance, corrosion resistance, and retention of mechanical strength at elevated temperatures. However, its high hardness, low th...
Vibrations are a common issue in the machining and metal-cutting sector, in which the spindle vibration is primarily responsible for the poor surface quality of workpieces. The consequences range from the need to manually finish the metal surfaces, r...
Machining processes through cutting are accompanied by dynamic phenomena that influence the quality of the processed surfaces. Thus, this research aimed to design, make, and use a tool with optimal functional geometry, which allowed a reduction of th...
Ultrasonic vibration superimposed turning represents a highly efficient method for surface microstructuring, which enables a combination with finish machining. However, there are almost no industrial applications of this process due to the special ki...
Tuning the coupling of pulse duration and tool vibration in electrochemical machining (PVECM) is an effective method to improve machining accuracy and surface quality. In general, the pulse is set at the same frequency as the tool vibration, and a sy...
Micro-hole is widely used in various fields, and common machining methods of micro-hole in factories are drilling and electrical discharge machining (EDM), but because of low machining efficiency, these methods cannot meet requirements. Therefore, it...
The micro-hole machining of quartz wafers depends on photolithography techniques akin to those used in semiconductor fabrication. These methods present challenges due to high equipment setup costs, large space requirements, and environmental pollutio...
Difficulty in debris removal and the transport of fresh dielectric into discharge gap hinders the process performance of electrical discharge machining (EDM) process. Therefore, in this work, an economical low frequency vibration platform was develop...
Additive manufacturing (AM) enables the consolidation of components and the integration of new functionalities in metallic parts, but layered fabrication often results in poor surface quality and geometric deviations. Among various surface treatment...
The objective of this work is to analyze the influence of the vibration-assisted turning process on the machinability of S235 carbon steel. During the experiments using this vibrational machining process, the vibrational amplitude and frequency of th...
Ti-6Al-4V titanium alloy is widely used in aerospace and other fields due to its excellent performance, but conventional machining has problems such as high cutting force, high temperature, and tool wear, which leads to the difficulty of balancing su...
Ti-Al intermetallic compounds (Ti-Al IMCs) are emerging as lightweight, high-temperature structural materials with considerable application potential. Owing to their low density and high-temperature capability, these materials can improve the thrust-...
The nickel-based superalloy is widely used in aerospace. It is a typical difficult-to-cut material with poor plasticity. During the cutting process, the fluctuation of the cutting force caused by the change of cutting conditions can aggravate tool vi...
The dynamic stability of the machining set and the entire cutting process, together with the appropriate form of chips generated during machining under the given conditions, are the basic prerequisites for autonomous machining in accordance with the...
Different methods have been applied to refine various characteristics of the zone (or nugget) obtained by friction stir welding (FSW). In the current research, joining components are vibrated normal to the weld line during FSW to refine the zone micr...
The paper aims to present a mechatronic device able to micro-position the workpiece and to reject disturbances due to machining operation. A decoupling method is proposed for a parallel kinematic machine (PKM) fixturing platform composed by a 3-DoF f...
This study presents surface roughness modeling for machined parts based on cutting parameters (spindle speed, cutting depth, and feed rate) and machining vibration in the end milling process. Prediction models were developed using multiple regression...
Dynamic errors in robotic machining can degrade part quality, particularly in flexible platforms that are susceptible to both geometric and inertial disturbances. This work introduces a data-driven digital twin for pointwise prediction of circular tr...
This study examined the impact of vibration-assisted drilling (VAD) on hole quality and residual stress in Ti-6Al-4V ELI (Extra Low Interstitials) material. Ti-6Al-4V ELI possesses excellent mechanical properties but presents challenges in machining,...
Biological surfaces have unique characteristics and properties due to the presence of well-organized micro- and nano-architectures. Fish scales, lotus leaves, shark skin, gecko feet, and insect wings are prime examples of how hierarchical and directi...
Vibration measurements are a frequently used tool in technical issues. They are widely used in operation and for testing irregularities in the operation of machines and devices, including hydraulic machines (turbines, pumps, and pump turbines). This...
The importance of functional surfaces is continuously growing in the context of increasing demands on the sustainability of performance, resource efficiency and manufacturing costs of technical systems. For example, microstructured substrate surfaces...
A vibration ditching machine is a machine that can effectively reduce ditching resistance and energy consumption. In this paper, taking a self-developed, self-excited vibration ditching machine as the research object, we explore its internal dynamic...
Predictions of cutting vibrations are necessary for improving the operational efficiency, product quality, and safety in the machining process, since the vibration is the main factor for resulting in machine faults. “Cutting vibration” may be caused...
Rotating machine vibration signals typically represent a large collection of responses from various sources in a machine, along with some background noise. This makes it challenging to precisely utilise the collected vibration signals for machine fau...
The efficiency and dependability of machine set depends on the quality of maintenance of functional units of the machine set rotor. Diagnosing the functional units of the machine set can significantly increase the effectiveness and efficiency of the...
Artificial intelligence (AI)-based machine learning (ML) models seem to be the future for most of the applications. Recent research effort has also been made on the application of these AI and ML methods in the vibration-based faults diagnosis (VFD)...
Cold orbital forging (COF) as an advanced incremental metal-forming technology has been widely used in processing vehicle parts. During the COF process, the vibration on the COF machine injures the service life of the machine and the quality of the f...
Electrical machines are important devices that convert electric energy into mechanical work and are widely used in industry and people’s life. Undesired vibrations are harmful to their safe operation. Reviews from the viewpoint of fault diagnos...
This study investigates the vibrations of centrifugal loop dryer machines used in plastic recycling processes. These machines are characterized by large uncertainties, high vibration, and unmodeled dynamics, making the design and maintenance of real-...
For the mechanized technical mode of total wheat straw returning to field, there are problems such as large vibration during the operation of the straw returning machine that, in turn, affect the effect of stubble breaking. This study took the Tongti...
Many of the industrial processes, including material removal operation for shape generation on the surface of material, exploit the assistance of ultrasonic vibrations. This trend of using ultrasonic vibration in order to improve the process performa...
Auxiliary teeth are usually used in fractional-slot concentrated winding (FSCW) machines for fault tolerance. However, the influence of auxiliary teeth on torque and electromagnetic vibration performance differs with different slot–pole configu...
This study builds upon previous research that utilised a vibration-based machine learning (VML) approach for diagnosing rotor-related faults in rotating machinery. The original method used artificial neural networks (ANN) to classify rotor-related fa...
Accurately predicting surface vibration signals of diesel engines is the key to evaluating the operation quality of diesel engines. Based on an improved empirical mode decomposition and extreme learning machine algorithm, the characteristics of diese...
This study presents an efficient vibration-based fault detection method for rotating machines utilising the poly-coherent composite spectrum (pCCS) and machine learning techniques. pCCS combines vibration measurements from multiple bearing locations...
With the development of intelligent machine tools, monitoring the vibration by the accelerometer is an important issue. Accelerometers used for measuring vibration signals during milling processes require the characteristics of high sensitivity, high...
This study focused on analyzing vibrations during waterjet cutting with variable technological parameters (speed, vfi; and pressure, pi), using a three-axis accelerometer from SEQUOIA for three different materials: aluminum alloy, titanium alloy, and...
In this research, the main purpose was to study the applicability of a machining method on microscale medical-equipment manufacturing. The characteristics of wire electrochemical micromachining (WECMM) against NiTi 50-50 wire was investigated. The st...
Used in close proximity to dental practitioners, dental tools and devices, such as hand pieces, have been a possible risk factor to hearing loss due to the noises they produce. Recently, additional technologies such as CAD/CAM (Computer Aided Design/...
Machine tool vibrations play a significant role in hindering productivity during machining. The growing vibrations accelerate tool wear and chipping, cause a poor wave surface finish, and may damage the spindle bearing. Some research showed that trib...
Nickel-Titanium (Ni-Ti) alloys are very difficult-to-machine materials causing notable manufacturing problems due to their unique mechanical properties, including superelasticity, high ductility, and severe strain-hardening. In this framework, the ai...
The article describes the basic parts and the overall design of the laboratory machine, which can be used to measure vibrations generated by a rotating conveyor roller attached to the flattened parts of its axis in the cut-outs of the conveyor idler...
Multi-frequency vibrators have advantages in bulk materials processing but their design is usually complicated. This article presents the synthesis of design parameters of a two-frequency inertial vibrator according to the specified power characteris...
The increasing demands for the reliability of modern industrial equipment and structures necessitate advanced techniques for design, monitoring, and analysis. This review article presents the latest research advancements in the application of machine...
With the aim of predicting the environmental vibrations induced by an elevated high-speed railway, a machine learning method was developed by combining a random forest algorithm and Bayesian optimization, using a dataset from on-site experiments. Whe...
This paper presents whole-body vibration prediction in an agricultural tractor based on selected operational parameters using machine learning. Experiments were performed using a Landini Powerfarm 100 model tractor on farmlands and service roads loca...
Vibration in state-of-the-art machining impacts accuracy by diminishing the machine’s dynamic precision and the workpiece surface quality. The dependability of the cutters and productivity becomes a severe problem for optimizing the computer nu...
of 52