Background: We have applied an anterior locking compression mini plate in addition to a conventional superior locking compression plate for the treatment of wedge or multifragmentary clavicular fractures. Methods: Medical and radiologic data were ret...
This study investigated the incidence of failure after locking compression plate (LCP) osteosynthesis around a well-fixed stem of periprosthetic femoral fractures (PFFs). We retrospectively evaluated outcomes of 63 Vancouver type B1 and C PFFs treate...
The applicability of a polyether ether ketone locking compression plate (PEEK LCP) fabricated using FDM (fused deposition modeling)-based 3D printing to treat actual patients was studied. Three different tests—bending, axial compression, and ax...
A case study of a failed humeral shaft locking compression plate is presented, starting with a clinical case where failure occurred and an implant replacement was required. This study uses finite element method (FEM) in order to determine the failure...
Background: Mid-shaft clavicle fracture fixation carries neurovascular injury risk. The purpose of this study was to compare bicortical compression and unicortical locked clavicle plate constructs biomechanically. Materials and Methods: Ten fourth-ge...
Background and Objectives: Acetabular fractures, though infrequent, present considerable challenges in treatment due to their association with high-energy trauma and poor prognoses. Posterior wall fractures, the most common type among them, typically...
Background and Objectives: The aim of this study was to investigate under dynamic loading the potential biomechanical benefit of simulated first tarsometatarsal (TMT-1) fusion with low-profile superelastic nitinol staples used as continuous compressi...
Supramalleolar osteotomy (SMO) in pediatric patients can be fixed in various ways. We analyzed the records of 77 pediatric patients (124 SMOs) aged ≤16 years. In 56 patients (96 SMOs), K-wires were used to stabilize SMOs (WF group), while 21 patie...
Background: The distal ulna hook plate was recently introduced for the treatment of fifth metatarsal base fractures, but no special articles have reported the surgical results of the plate fixation of displaced or comminuted fifth metatarsal base fra...
Background and Clinical Significance: Local recurrence of extremity leiomyosarcoma after multiple operations and radiotherapy presents a major therapeutic challenge. Adequate oncologic clearance must be balanced against preservation of skeletal stabi...
Schatzker type V bicondylar tibial plateau fractures present a major challenge due to the difficulty of achieving stable fixation with minimally invasive strategies. This study introduces a dual-thread lag and locking plate (DLLP) design that integra...
A fractured stainless steel 3.5 mm proximal humerus internal locking system (PHILOS) plate and screws were investigated in this paper. This plate was used for ankle arthrodesis of a 68-year-old female with a right ankle deformity. Both the plate and...
8 May 2012
Maxillofacial trauma caused by firearms has considerably increased, in which the mandibular body is the site of highest incidence of firearm projectiles. In these cases, the use of titanium plates and screws allows the early restoration of form and f...
Proximal humerus fractures increase with the aging of the population. Due to the high failure rates of surgical treatments such as open reduction and internal fixation (ORIF), biomechanical studies seek to optimize the treatments and intervening fact...
Polyaxial locking systems are widely used for strategic surgical placement, particularly in cases of osteoporotic bones, comminuted fractures, or when avoiding pre-existing prosthetics. However, studies suggest that polyaxiality negatively impacts sy...
Extra-articular distal humerus fractures present surgical challenges, often requiring technically demanding posterior approaches with high radial nerve injury risks or off-label use of anatomically mismatched proximal plates. This study aimed to comp...
This study evaluates the mechanical behavior of bone-implant assemblies used in treating complex proximal humerus fractures, a clinical challenge due to the anisotropic nature of bone and variability in patient-specific conditions. The aim of this st...
Background: Various techniques have been reported to treat large, segmental tibial defects, such as autogenous bone graft, vascularized free fibula transfer and bone transport. We present a case of a 24-year-old male with a 17-year history of chronic...
Background and Objectives: The management of periprosthetic tibial fractures distal to revision Total Knee Arthroplasty (TKA) presents a biomechanical challenge, often requiring extramedullary locking plates when long stems preclude nailing. While in...
Adding a fibular strut bone graft to locking plate fixation has been introduced to improve stability and prevent varus collapse. The purpose of this study was to perform finite element analysis (FEA) of the biomechanical characteristics of different...
This work is about numerical simulations of vortex induced acoustic resonance in a duct, experimentally investigated by Welsh et al. Vortex shedding of low-speed flow over a flat plate excites an acoustic duct mode, leading to a lock-in of shedding a...
Nonunion is one of the most dreaded complications after operative treatment of mandible fractures or after mandible reconstruction using vascularized and non-vascularized bone grafts. Often diagnosis is made at advanced stage of disease when pain or...
An understanding of the biomechanical characteristics and configuration of flexible and locked plating in order to provide balance stability and flexibility of implant fixation will help to construct and promote fast bone healing. The relationship be...
Canine disc-associated cervical spondylomyelopathy (DA-CSM) is a form of caudal CSM, characterized by the compression of the spinal cord and nerve roots due to an intervertebral disc protrusion. It is more frequent in large canine breeds. A variety o...
Plantar plate positioning has been demonstrated as biomechanically superior. However, some operators remain resentful about the morbidity of the surgical approach. To provide improved plate fixation for first tarsometatarsal joint arthrodesis with re...
Background: Isolated ulna shaft fractures (USFs) are a relatively uncommon, but significant, injury. For unstable USF treatment, open reduction and internal fixation (ORIF) is the gold standard, while for stable USFs several procedures were described...
The purpose of this study was to analyze the effects of locking plate fixation used for bridging of tibial segmental ostectomy and of cast immobilization on gait biomechanics in goats. We hypothesized that stable fixation of a segmental bone defect,...
Background/Objectives: Proximal interphalangeal joint (PIJ) arthrodesis is a common surgical intervention for patients with PIJ osteoarthritis or trauma-related joint destruction. The objective of this study was to evaluate the biomechanical stabilit...
Background: To compare the biomechanical performance of three internal fixation constructs for AO/OTA 33-A3 distal femoral fractures. Methods: Thirty AO/OTA 33-A3 synthetic distal femoral fracture models were constructed and randomly divided into thr...
Introduction: We investigated the biomechanical behaviour of different fixations of the tibial posterior malleolus (TPM), simulating distinct situations of involvement of the tibiotalar articular surface (TTAS) through a finite element model (FEM). M...
Proper fixation techniques are crucial in orthopedic surgery for the treatment of various medical conditions. Fractures of the distal humerus can occur due to either high-energy trauma with skin rupture or low-energy trauma in osteoporotic bone. The...
Background: Locking a compression plate is a more favorable surgical technique than intramedullary nailing in the treatment of distal femur fractures. This study analyzed the risk factors of proximal screw breakage retrospectively, which was confirme...
Purpose: Operative therapy for unstable lateral clavicle fractures is necessary to reduce the risk of bony non-union. Irritation and restriction during sportive activities due to the implanted materials are a common reason for impaired function and i...
Background/Objectives: Intramedullary screw fixation (IMS) and locking plate fixation (LPF) are currently recommended treatments for proximal fifth metatarsal fractures (PFMF). However, treating comminuted or small displaced avulsion PFMF with IMS po...
Background and Objectives: Anterior sacroiliac fracture dislocation (ASFD), also known as locked pelvis, is a rarely reported diagnosis. The types of ASFDs are often misdiagnosed as lateral compression fractures due to the presence of crescent f...
Biodegradable magnesium-based composites show potential application in orthopedic implants, with excellent biocompatibility, low density, and biodegradable characteristics inside the human body. In this study, the stir casting procedure was employed...
This paper suggests parametric accelerated life testing (ALT) as a systematic reliability technique to generate the reliability quantitative (RQ) specification such as mission cycle for identifying design flaws in mechanical systems as exerting the a...
In this work, we present ultrashort pulse generation from passively mode-locked Cr:ZnS laser with a monolayer graphene-coated ZnSe substrate exhibiting high nonlinearity. The femtosecond Cr:ZnS laser produces output power up to 330 mW at a 233 MHz re...
The commonly used aluminum–copper alloys in industry are mainly rolled plates and extruded or drawn bars. The aluminum–copper alloys’ anisotropy generated in the manufacturing process is unfavorable for subsequent applications. Its...
This study demonstrates the use of parametric accelerated life testing (ALT) as a way to recognize design defects in mechanical products in creating a reliable quantitative (RQ) specification. It covers: (1) a system BX lifetime that X% of a product...
Background: This study investigates the surgical state-of-the-art procedure for humeral shaft fractures with primary radial nerve palsy based on its own case series in relation to the current and established literature. Methods: Retrospective review...
(1) Objective: External fixation systems are commonly used by surgeons to ensure stabilization and consolidation of bone fractures, especially in patients who are at high risk for systematic complications. Both rigid and elastic external fixations ar...
12 July 2025
Study design: The advent of the Matrix WaveTM System (Depuy-Synthes)—a bone-anchored Mandibulo-Maxillary Fixation (MMF) System—merits closer consideration because of its peculiarities. Objective: This study alludes to two preliminary stag...
Although internal fixation and surgical approaches promote fracture healing, some outcomes remain unsatisfactory. Advanced platelet-rich fibrin (A-PRF) has been shown to provide more growth factors, and in vitro cell proliferation has not been evalua...
16 May 2022
Lateral malleolus fracture is one of the most common fractures. However, there is controversy regarding the rehabilitation protocols used after surgery. In particular, the initiation point for weight-bearing has not been standardized. In the present...
The current gold standard of care for mandibular segmental defeat reconstruction is the use of Ti-6Al-4V immobilization hardware and fibular double barrel graft. This method is often successful immediately at restoring mandible function, however the...
Because of the constant northward movement of the Indian plate and blockage of the Eurasian continent, the Qinghai–Tibet Plateau has been extruded by north–south compressive stresses since its formation. This has caused the plateau to esc...
Grade IV lateral patellar luxation is an advanced orthopedic condition that may be associated with severe skeletal deformities, chronic soft-tissue contracture, and irreversible loss of normal stifle function. Although reconstructive procedures are c...