To study the evolution of acoustic emission (AE) parameters and the differences in the fracturing and failure process of rocks under different loading modes, AE signals of marble were detected during uniaxial compression tests (UCTs), direct tensile...
Although the rutting resistance, fatigue cracking, and the resistance to water and frost are important for the asphalt pavement, the strength of asphalt mixture is also an important factor for the asphalt mixture design. The strength of asphalt mixtu...
In this study, fatigue crack tests of CuNi2Si alloys using the replica technique under symmetrical tensile-compression loading, and rotational-bending loading were carried out with the same nominal stress amplitude. Observation and analysis results i...
Bamboo scrimber is an environmentally friendly biomass building material with excellent mechanical properties. However, it is susceptible to delamination failure of the transverse fibers under compression, which limits its structural performance. To...
Given the frequent occurrence of expansive soil slope failures during rainy season, in situ borehole shear tests were conducted to investigate how loading-added modes and rainfall conditions affect the shear strength parameters of expansive soils. Th...
This paper focuses on the aramid fiber-reinforced polymer (AFRP) sheet bonding method to investigate the influences of the sheet volume and input impact energy on the failure modes of strengthened RC beams. The drop-weight impact loading tests were c...
Fatigue tests were performed to estimate the coplanar and branch crack growth rates on rail and wheel steel under non-proportional mixed mode I/II loading cycles simulating the load on rolling contact fatigue cracks; sequential and overlapping mode I...
Rolling contact fatigue cracks in rail and wheel undergo non-proportional mixed mode I/II/III loading. Fatigue tests were performed to determine the coplanar and branch crack growth rates on these materials. Sequential and overlapping mode I and III...
This study focused on standard Compact Tension (CT) specimens and two loading modes during the numerical analyses carried out, namely: pure mode I and mixed-mode loading (Modes I+II). Numerical stress intensity factors, KI, were calculated using Abaq...
The mixed-mode loading fretting fatigue caused by the complex geometry of components and combinations of boundary conditions is a common failure mechanism in engineering components, which can dramatically reduce fatigue life. In this paper, a cylinde...
In underground engineering, the deformation of surrounding rock caused by “three heights and one disturbance” leads to the failure of grouted rockbolt systems, which causes huge economic losses to the mining industry. The research shows t...
Under coupled compression–shear loading, the failure and instability behavior of inclined pillars is different from that of horizontal pillars. To enhance the reliability and accuracy of pillar strength design, the influence of different inclin...
In some automated container terminals, railway lines have been implemented into the port, saving container transfer time. However, the equipment scheduling level of the railway yard needs to be improved for managers. In the equipment scheduling of lo...
As an important part of the power Internet of Things, the dual-mode communication network that combines the high-speed power line carrier (HPLC) mode and high-speed radio frequency (HRF) mode is one of the hot directions in current research. Since no...
Photovoltaic (PV) glazing is widely used in the building sector for its power generation advantages. However, its low transmittance reduces solar heat gain, limiting energy-saving effectiveness in heating regions. To address this, the present study p...
To implement renewable energy resources, microgrid systems have been adopted and developed into the technology of choice to assure mass electrification in the next decade. Microgrid systems have a number of advantages over conventional utility grid s...
Mixed mode I–III fracture commonly occurs in rock masses under complex three-dimensional stress states, yet the combined effects of loading conditions and fracture mode remain unclear. In this study, a heterogeneous sandstone disc model is deve...
To clarify the potential failure modes of reinforced concrete (RC) beams under impact and understand their impact resistance safety, a comprehensive study was conducted by focusing on the failure mode discrimination and failure probability of RC beam...
In this paper, two light-load efficiency improvement methods are presented and applied to the ultrahigh step-down converter. The two methods are both based on skip mode control. Skip Mode 1 only needs one half-bridge driver integrated circuit (IC) to...
A novel dual-mode control scheme is proposed in this paper that permits the active-clamp flyback (ACF) converter to operate in both the quasi-resonant (QR) mode under light load and the active-clamp mode under medium or heavy load. The mode transitio...
The evaluation of energy release rate with angle is still a challenging task in metal crack propagation analysis, especially for the mixed Mode I-II-III loading situation. In this paper, the energy release rate associated with stress intensity factor...
In this work mass loading sensitivity of a Sezawa wave mode based surface acoustic wave (SAW) device is investigated through finite element method (FEM) simulation and the prospects of these devices to function as highly sensitive SAW sensors is repo...
This study investigates the mixed-mode I/II fracture behavior of O-notched diagonally loaded square plate (DLSP) samples containing an edge crack within the O-notch. This investigation aims to explore the combined effects of loading rate and mode mix...
Short-term electric load forecasting plays a significant role in the safe and stable operation of the power system and power market transactions. In recent years, with the development of new energy sources, more and more sources have been integrated...
For operational management of power plants, it is desirable to possess more precise short-term load forecasting results to guarantee the power supply and load dispatch. The empirical mode decomposition (EMD) method and the particle swarm optimization...
In order to accurately investigate the disturbance of complex distributed mass loading on surface acoustic wave (SAW) propagation characteristics, two-dimensional coupling-of-modes (2-D COM) theory and finite element method (FEM) were used to simulat...
An economically efficient yet safe design of concrete structures under high-cycle fatigue loading is a rather complex task. One of the main reasons is the insufficient understanding of the fatigue damage phenomenology of concrete. A promising hypothe...
Fatigue failure evolution is a process of damage accumulation under continued stresses and forces. The mechanical component is always subjected to various loadings and the lifespan is mainly governed by fatigue. The low cycle fatigue (LCF) is a key f...
Sub-hourly load forecasting can provide accurate short-term load forecasts, which is important for ensuring a secure operation and minimizing operating costs. Decomposition algorithms are suitable for extracting sub-series and improving forecasts in...
During the loading process, significant external position disturbances occur in the electro–hydraulic load simulation system. To address these position disturbances and effectively mitigate the impact of uncertainty on system performance, this...
During quadrotor load transport, the cable’s elasticity exacerbates load fluctuations, which may result in platform instability or a potential crash. This paper introduced a model of the connecting cable as a spring-damper system and establishe...
This paper proposes a digital sliding-mode controller for a DC-DC boost converter under constant power-loading conditions. The controller has been designed in two steps: the first step is to reach the sliding-mode regime while ensuring inrush current...
In quasi-brittle materials such as concrete, numerical methods are frequently used to simulate the crack propagation for monotonic loading. However, further research and action are required to better understand the fracture properties under cyclic lo...
This paper presents an improved sliding-mode observer (SMO) for estimating mechanical parameters and compensating load torque in permanent magnet synchronous motor (PMSM) drives. Traditional SMOs have limited robustness when the motor model is inaccu...
This research deals with determination of the loading of an open container during operating modes. The special feature of this container is its convex walls. This engineering solution increases the useful capacity of a container by 8% in comparison t...
Magnetoelastic sensors as an important type of acoustic wave sensors have shown great promise for a variety of applications. Mass sensitivity is a key parameter to characterize its performance. In this work, the effects of mass load distribution on t...
Micro-arc Oxidation (MAO) is a technology for non-ferrous metal surface treatment through growth ceramic coating in situ. To determine the influence of the power supply mode and the loading parameters on the film forming of magnesium alloy micro-arc...
Distance simultaneous interpreting is a typical example of technology-mediated interpreting, bridging participants (i.e., interpreters, audience, and speakers) in various events and conferences. This study explores how presentation mode affects cogni...
The implementation of the sliding mode control (SMC) for load frequency control of power networks becomes difficult due to the chattering phenomenon of high-frequency switching. This chattering problem in SMC is extremely dangerous for actuators used...
This paper proposes the grid synchronization method of inverter using a quasi Proportional+Multi Resonant (P+MR) control-based voltage controller a stationary reference frame. The inverter supplies a non-linear load under the islanded mode. In island...
Investigations on the fatigue crack growth of commercial pure titanium are carried out with cruciform specimens under different biaxial load ratios (λ = 0, 0.5, and 1) and crack inclination angles (β = 90°, 60°, and 45°) in th...
This work presents the design of a novel fully canonical triple-mode filter with source–load coupling for 5G applications, exploiting its very compact size for the FR1 band. The design is carried out using circular waveguide technology to attai...
The dynamic response of complex equipment under mixed-mode loading is significant for structural design. Bolted joints are the primary connection mode of subsystem assembly, and the degradation of bolted joints may reduce the safety and reliability o...
Reinforced concrete (RC) slabs are the main load-bearing member of engineering structures, which may be threatened by blast loading. Predicting and analyzing the damage condition and failure mode of RC slab is a necessary means to ensure structural s...
In recent years, DC microgrid systems feeding constant power loads (CPLs) have been given a particular focus due to their effect on the overall system stability caused by their electrical characteristics behaving as negative incremental impedance. To...
The electric cylinder has become a research hotspot in the future because of its high energy efficiency and excellent dynamic performance. The electric cylinder is driven by a permanent magnet synchronous motor (PMSM). However, the existing high-perf...
Cemented backfill (CTB) in mining operations is frequently exposed to blasting-induced dynamic disturbances. These disturbances compromise CTB stability. This study employed split Hopkinson pressure bar (SHPB) tests, scanning electron microscopy (SEM...
This paper presents finite element (FE) modeling of the debonding behavior of fiber reinforced polymer (FRP)-to-concrete interfaces subject to mixed-mode loading, which is realized through a peeling test of FRP composites externally bonded onto a con...
To improve the speed regulation performance of permanent magnet synchronous motor (PMSM) drive systems, a composite control strategy consisting of an improved sliding mode controller (ISMC) and an adaptive Luenberger load torque observer (ALLTO) is p...
The operation of Boost converters in discontinuous conduction mode (DCM) is suitable for many applications due to the, among other advantages, inductor volume reduction, high efficiency, paralleling, and low cost. Uses in biomedicine, nano/microelect...
of 164