Skip to Content

566 Results Found

  • Article
  • Open Access
12 Citations
2,832 Views
19 Pages

Numerical Simulation of Multi-Fracture Propagation Based on the Extended Finite Element Method

  • Qiquan Ran,
  • Xin Zhou,
  • Jiaxin Dong,
  • Mengya Xu and ,
  • Dianxing Ren and
  • Ruibo Li
  • + 1 author+ 0 author

7 July 2023

Multi-stage, multi-cluster fracturing in horizontal wells is widely used as one of the most effective methods for unconventional reservoir transformation. This study is based on the extended finite element method and establishes a multi-hydraulic fra...

(This article belongs to the Special Issue Recent Advances in Reservoir Stimulation and EOR Technology in Unconventional Reservoirs)
  • Article
  • Open Access
10 Citations
8,820 Views
17 Pages

30 October 2015

Fluid-solid coupling is ubiquitous in the process of fluid flow underground and has a significant influence on the development of oil and gas reservoirs. To investigate these phenomena, the coupled mathematical model of solid deformation and fluid fl...

(This article belongs to the Special Issue Advances in Modeling Flow and Transport in Porous Media)
  • Article
  • Open Access
6 Citations
2,346 Views
19 Pages

Numerical Simulation of the Simultaneous Development of Multiple Fractures in Horizontal Wells Based on the Extended Finite Element Method

  • Enshun Ping,
  • Peng Zhao,
  • Haiyan Zhu,
  • Yuzhong Wang and ,
  • Zixi Jiao,
  • Qingjie Zhao and
  • Gan Feng
  • + 2 authors+ 0 author

23 February 2024

Simultaneous multiple-fracture treatments in horizontal wellbores have become an essential technology for the economic development of shale gas reservoirs. During hydraulic fracturing, fracture initiation and propagation always induce additional stre...

(This article belongs to the Special Issue Application and Optimization of CCUS Technology in Shale Gas Production and Storage)
  • Article
  • Open Access
12 Citations
3,644 Views
23 Pages

2 January 2024

The service performance of tunnel lining is affected by crack properties and development states. In this paper, numerical simulation models were established to investigate the mechanics characteristics and safety performance for lining structures und...

(This article belongs to the Special Issue Research on the Construction Mechanical Behavior and Deformation Characteristics of Lining Structure)
  • Article
  • Open Access
6 Citations
3,020 Views
22 Pages

28 August 2023

In the cold rolling process, edge cracks, particularly those near the welded zone, can inadvertently lead to strip rupture. This study employed the extended finite element method (XFEM) to analyze the crack propagation behavior in welded strip steel...

  • Article
  • Open Access
19 Citations
5,251 Views
20 Pages

7 November 2020

The extended finite element method (XFEM) is efficient in simulating crack initiation and its evolution process for reinforced-concrete (RC) structures due to its ability to solve fracture problems. Moreover, the multiscale numerical simulation helps...

(This article belongs to the Special Issue Recent Advances in Testing and Modelling Reinforced Concrete Structures)
  • Article
  • Open Access
22 Citations
3,436 Views
19 Pages

28 May 2019

Refracturing is a key technology in enhancing the conductivity of fractures from hydraulically-fractured wells. However, the deflecting mechanism of the diverting fracture is still unclear. In this paper, a fully coupled seepage-stress model based on...

  • Article
  • Open Access
8 Citations
2,605 Views
13 Pages

19 November 2021

In recent years, with the development of the permanent magnet linear synchronous motor (PMLSM), the application of PMLSM has not been limited only to the high-end equipment field; the primary stator discontinuous segmented-PMLSM (DSPMLSM), which cons...

(This article belongs to the Special Issue Research on Motor and Special Electromagnetic Device of Symmetry)
  • Article
  • Open Access
1 Citations
2,521 Views
18 Pages

Studying a Repair Method of LY12 Aluminum Alloy Plate

  • Cheng Lv,
  • Fenghui Wang,
  • Sen Yang and
  • Xiang Zhao

17 October 2023

The difference in the strengthening effect of different thickness reinforcement plates on an LY12 aluminum alloy central defect plate and the load distribution between the reinforcement plate and central defect plate in the reinforcement plate struct...

(This article belongs to the Special Issue Creep and Fatigue Behavior of Alloys)
  • Article
  • Open Access
11 Citations
3,656 Views
19 Pages

Structural Integrity and Life Assessment of Ti-6Al-4V Orthopaedic Implants

  • Katarina Čolić,
  • Svetlana M. Kostić,
  • Simon Sedmak,
  • Nenad Gubeljak and
  • Aleksandar Grbović

19 March 2025

This paper presents an experimental and numerical analysis of the mechanical behaviour of orthopaedic implants with crack-type defects, considering the principles and advantages of the modern X-FEM method, which was used due to limitations of traditi...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
17 Citations
13,494 Views
44 Pages

21 September 2009

A general review of the extended finite element method and its application to the simulation of first-order phase transitions is provided. Detailed numerical investigations are then performed by focusing on the one-dimensional case and studying: (i)...

(This article belongs to the Special Issue Numerical Simulation of Discontinuities in Mechanics)
  • Communication
  • Open Access
24 Citations
6,204 Views
10 Pages

PVDF Energy Harvester for Prolonging the Battery Life of Cardiac Pacemakers

  • Christopher Hu,
  • Kamran Behdinan and
  • Rasool Moradi-Dastjerdi

8 July 2022

Patients who have an implantable cardiac pacemaker that survive beyond the operational life of the device require replacement surgeries that increase healthcare costs and may possibly introduce post-operative complications such as infection. In this...

(This article belongs to the Section Actuator Materials)
  • Article
  • Open Access
8 Citations
7,971 Views
7 Pages

Focusing Light with Curved Guided-Mode Resonance Reflectors

  • Mingyu Lu,
  • Huiqing Zhai and
  • Robert Magnusson

28 April 2011

Employing numerical simulations, we investigate the possibility of using curved guided-mode resonance (GMR) elements to focus light in reflection. We treat GMR reflectors with a parabolic shape and show that they are capable of focusing light effecti...

(This article belongs to the Special Issue Nano-photonic Devices)
  • Article
  • Open Access
4 Citations
5,828 Views
14 Pages

14 December 2018

A finite-difference approach with non-uniform meshes was presented for simulating magnetotelluric responses in 2D structures. We presented the calculation formula of this scheme from the boundary value problem of electric field and magnetic field, an...

  • Article
  • Open Access
18 Citations
3,692 Views
22 Pages

Fracture Modelling of a Cracked Pressurized Cylindrical Structure by Using Extended Iso-Geometric Analysis (X-IGA)

  • Soufiane Montassir,
  • Hassane Moustabchir,
  • Ahmed Elkhalfi,
  • Maria Luminita Scutaru and
  • Sorin Vlase

23 November 2021

In this study, a NURBS basis function-based extended iso-geometric analysis (X-IGA) has been implemented to simulate a two-dimensional crack in a pipe under uniform pressure using MATLAB code. Heaviside jump and asymptotic crack-tip enrichment functi...

(This article belongs to the Special Issue Mathematical Modeling and Simulation in Mechanics and Dynamic Systems)
  • Article
  • Open Access
4 Citations
2,431 Views
22 Pages

Numerical Modeling Technique of Damage Behavior of MaSonry-Infilled RC Frames

  • Bo Liu,
  • Chunhui Liu,
  • Xiaomin Wang,
  • Jingchang Kong and
  • Zhiwang Chang

24 January 2023

The damage pattern of masonry-infilled reinforced concrete (RC) frame structures in earthquake events is complicated, and understanding the detailed failure behavior of these structures and modeling it accurately has been a challenging task. In this...

(This article belongs to the Special Issue Seismic Performance Assessment for Structures)
  • Article
  • Open Access
34 Citations
6,150 Views
21 Pages

2 November 2021

In the present work, the tensile and fracture behavior of ultra-fine grained (UFG) Al 6061 alloy was simulated using extended finite element method (XFEM). UFG Al 6061 alloy processed by cryorolling (CR) and accumulative roll bonding (ARB) was invest...

(This article belongs to the Section Metal Failure Analysis)
  • Feature Paper
  • Article
  • Open Access
2 Citations
1,857 Views
19 Pages

21 March 2025

In this study, the extended finite element method (XFEM) was integrated into the generalized multiscale finite element method with global–local enrichment (GFEMgl) to simulate 2D heat conduction in highly heterogeneous materials (i.e., matrixes...

(This article belongs to the Section C3: Real Analysis)
  • Article
  • Open Access
17 Citations
3,790 Views
20 Pages

19 September 2019

In this contribution, the ratcheting behavior and local field distribution of unidirectional metal matrix composites are investigated under cyclic loading. To that end, we extended the finite-volume direct averaging micromechanics (FVDAM) theory by i...

  • Article
  • Open Access
7 Citations
5,060 Views
15 Pages

A Novel Efficient FEM Thin Shell Model for Bio-Impedance Analysis

  • Jiawei Tang,
  • Mingyang Lu,
  • Yuedong Xie and
  • Wuliang Yin

17 June 2020

In this paper, a novel method for accelerating eddy currents calculation on a cell model using the finite element method (FEM) is presented. Due to the tiny thickness of cell membrane, a full-mesh cell model requires a large number of mesh elements a...

(This article belongs to the Special Issue Biomedical Sensing and Imaging)
  • Article
  • Open Access
4 Citations
2,964 Views
14 Pages

Numerical Study of Crack Prediction and Growth in Automotive Wheel Rims

  • Soufiane Montassir,
  • Hassane Moustabchir,
  • Ahmed El Khalfi,
  • Sorin Vlase and
  • Maria Luminita Scutaru

22 February 2024

Finite element analysis has become an essential tool for simulating and understanding crack growth. This technique holds significant importance in the field of mechanical engineering, where it finds wide application in the design and optimization of...

  • Article
  • Open Access
4 Citations
2,763 Views
11 Pages

21 March 2023

Three numerical methods, including element instantaneous failure, continuum damage mechanics, and extended finite element methods, are mainly used to simulate the fracture in cortical bone structure. Although many simulations focus on the cortical bo...

(This article belongs to the Section Applied Biosciences and Bioengineering)
  • Article
  • Open Access
4 Citations
1,931 Views
16 Pages

X-IGA Used for Orthotropic Material Crack Growth

  • Mohammed Berrada Gouzi,
  • Ahmed El Khalfi,
  • Sorin Vlase and
  • Maria Luminita Scutaru

2 August 2024

In this paper, we propose a new approach for numerically simulating the growth of cracks in unidirectional composite materials, termed extended isogeometric analysis, evaluating the maximum stress intensity factor and T-stress. To validate our approa...

  • Article
  • Open Access
27 Citations
9,309 Views
19 Pages

1 December 2018

Simulation of fracture in fiber-reinforced plastics (FRP) and hybrid composites is a challenging task. This paper investigates the potential of combining the extended finite element method (xFEM) and cohesive zone method (CZM), available through LS-D...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
4 Citations
4,768 Views
29 Pages

25 October 2021

The vector form intrinsic finite (VFIFE) method is a new and promising structural analysis technique that has many advantages as compared with the conventional finite element method (FEM) in analyzing the complex behaviors of a structure. However, de...

(This article belongs to the Topic Advances in Dynamics of Building Structures)
  • Article
  • Open Access
61 Citations
8,852 Views
14 Pages

1 February 2021

In this study, an artificial neural network is designed and trained to predict the elastic properties of short fiber reinforced plastics. The results of finite element simulations of three-dimensional representative volume elements are used as a data...

  • Proceeding Paper
  • Open Access
2 Citations
2,238 Views
9 Pages

20 January 2025

In the damage tolerance analysis of aircraft panels, it was necessary to frequently apply complex boundaries and loads to simulate crack propagation. It was difficult to simulate crack propagation with the conventional finite element method. In this...

(This article belongs to the Proceedings of 2nd International Conference on Green Aviation (ICGA 2024))
  • Article
  • Open Access
2 Citations
1,889 Views
17 Pages

Flexural Performance of Basalt-Fiber-Grid-Reinforced Concrete Two-Way Slabs: Experimental Study and Numerical Simulation

  • Chaobin Hu,
  • Shun Jin,
  • Liping Li,
  • Xinrong Liu and ,
  • Mingjian He,
  • Changrong Fu,
  • Ninghui Liang and
  • Weiping Zhou
  • + 3 authors+ 0 author

13 August 2025

To evaluate the feasibility of substituting mechanical testing with finite element simulation for basalt-fiber-grid-reinforced concrete, this study fabricated two-way slab specimens with varying basalt fiber grid layers. Flexural tests revealed load&...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
5 Citations
2,919 Views
18 Pages

22 May 2025

An improved interaction integral method has been proposed for heterogeneous materials with complex interfaces based on the postprocessing routine of commercial finite element software. This approach introduces a suitably designed auxiliary field to e...

(This article belongs to the Section Mechanical Engineering)
  • Technical Note
  • Open Access
4 Citations
2,813 Views
16 Pages

The present paper aims to study the crack propagating behavior of a stiffened plate under tensile and bending displacement load loads. The extended finite element method (XFEM) is used to analyze the residual ultimate strength of stiffened plates wit...

(This article belongs to the Special Issue Strength of Ship Structures)
  • Article
  • Open Access
4 Citations
5,449 Views
18 Pages

13 November 2023

A MATLAB algorithm was developed to insert cohesive elements at the interfaces between the matrix and precipitates in two dimensional (2D) representative volume elements (RVEs) of metals. The RVEs were created using OOF2 and imported into the “...

(This article belongs to the Special Issue Advanced Finite Element Method and Its Applications)
  • Article
  • Open Access
15 Citations
8,452 Views
18 Pages

Vibration Analysis of a 5-DOF Long-Reach Robotic Arm

  • Hedieh Badkoobehhezaveh,
  • Reza Fotouhi,
  • Qianwei Zhang and
  • Douglas Bitner

3 September 2022

In this paper, dynamic and vibration characteristics of a newly developed 5-degrees-of-freedom (5-DOF) long-reach robotic arm for farm applications is studied through finite element analysis (FEA), as well as experimentally. The new manipulator is de...

(This article belongs to the Special Issue Advancing Engineering Technologies and Applications in Structural Dynamics and Vibrations)
  • Article
  • Open Access
2 Citations
855 Views
18 Pages

Alternative Diagnostic Approaches for Various Single-Fault Conditions in Direct-Drive Low-Speed Coreless Permanent Magnet Generators

  • Alexandros Sergakis,
  • Nikolaos Gkiolekas,
  • Marios Salinas,
  • Markus Mueller and
  • Konstantinos N. Gyftakis

13 November 2025

A finite-element model of the direct-drive coreless permanent-magnet generator is used to simulate faults individually. Each fault case—rotor magnet demagnetization, a stator inter-turn short circuit, static eccentricity, and dynamic eccentrici...

(This article belongs to the Special Issue Condition Monitoring of Electrical Machines Based on Models)
  • Article
  • Open Access
14 Citations
3,985 Views
25 Pages

Experimental Research and Numerical Analysis of CFRP Retrofitted Masonry Triplets under Shear Loading

  • Houria Hernoune,
  • Benchaa Benabed,
  • Rajab Abousnina,
  • Abdalrahman Alajmi and ,
  • Abdullah M GH Alfadhili and
  • Abdullah Shalwan
  • + 1 author+ 0 author

6 September 2022

This paper presents an experimental and numerical study into the shear response of brick masonry triplet prisms under different levels of precompression, as well as samples reinforced with carbon fiber-reinforced polymer (CFRP) strips. Masonry triple...

(This article belongs to the Special Issue Polymer Fiber and Nanowire Reinforced Materials)
  • Article
  • Open Access
5 Citations
4,550 Views
12 Pages

Effects of Intrinsic Properties on Fracture Nucleation and Propagation in Swelling Hydrogels

  • Jingqian Ding,
  • Ernst W. Remij,
  • Joris J. C. Remmers and
  • Jacques M. Huyghe

27 May 2019

In numerous industrial applications, the microstructure of materials is critical for performance. However, finite element models tend to average out the microstructure. Hence, finite element simulations are often unsuitable for optimisation of the mi...

(This article belongs to the Special Issue Finite Element Methods in Smart Materials and Polymers)
  • Article
  • Open Access
14 Citations
3,640 Views
28 Pages

Initial Crack Propagation and the Influence Factors of Aircraft Pipe Pressure

  • Fusheng Wang,
  • Zheng Wei,
  • Pu Li,
  • Lingjun Yu and
  • Weichao Huang

23 September 2019

In aircraft engineering, an increase of internal pressure in a hydraulic pipe increases the probability of pipe damage, leading to crack propagation becoming a serious issue. In this study, the extended finite element method (XFEM) is applied to simu...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
3 Citations
3,183 Views
20 Pages

Methods for Determining the Thermal Transfer in Phase-Changing Materials (PCMs)

  • Vasile Bendic,
  • Dan Dobrotă,
  • Ionel Simion,
  • Emilia Bălan and ,
  • Nicoleta-Elisabeta Pascu and
  • Dana Iuliana Tilina
  • + 1 author+ 0 author

18 February 2020

A very important issue that needs to be solved as simply and correctly as possible is how to establish the thermal performance of phase-changing materials (PCM). The undertaken researches have analyzed the values of the thermal performances of the PC...

  • Article
  • Open Access
8 Citations
2,466 Views
29 Pages

This study presents a digital twin approach to quantifying the durability and failure risk of concrete gravity dams by integrating advanced numerical modelling with field monitoring data. Building on a previously developed finite element model for da...

  • Article
  • Open Access
10 Citations
4,416 Views
22 Pages

Determination of Directional Residual Stresses by the Contour Method

  • Josef Hodek,
  • Antonín Prantl,
  • Jan Džugan and
  • Pavel Strunz

15 October 2019

This study evaluated residual stresses in heat-treated specimens made of 316L stainless steel using FE analysis and compared them with stresses determined by the contour method. Contour method is usually used just for evaluation of residual stresses...

  • Article
  • Open Access
18 Citations
3,807 Views
21 Pages

30 December 2020

Roller compacted concrete (RCC) dams own a large number of horizontal construction layers, which can easily lead to weak joints among layers and generate interlayer joints with different scales to reduce the dam bearing capacity. In this study, exten...

(This article belongs to the Section Hydraulics and Hydrodynamics)
  • Article
  • Open Access
6 Citations
2,618 Views
14 Pages

16 April 2021

Cold recycled mixture (CRM) has been widely used around the world mainly because of its good ability to resist reflection cracking. In this study, mixed-mode cracking tests were carried out by the designed rotary test device to evaluate the cracking...

(This article belongs to the Special Issue Temperature Reduction Technologies Meet Asphalt Pavement: Green and Sustainability)
  • Article
  • Open Access
33 Citations
6,375 Views
13 Pages

6 April 2019

The planar induction heating possesses more difficulties in industry application compared with traditional spiral induction coils in mostly heat treatment processes. Numerical approaches are adopted in the power distribution and temperature predictio...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
16 Citations
5,741 Views
19 Pages

21 July 2022

To study the influence of random vibration on the fatigue life of airborne equipment, an aircraft electrical control box was selected as the research object. First, finite element software was used to model the dynamics of the airborne electrical con...

(This article belongs to the Special Issue Machine Diagnostics and Vibration Analysis)
  • Communication
  • Open Access
902 Views
18 Pages

30 April 2026

Reliable and fast radiation pattern prediction is critical for large-scale tightly coupled linear antenna arrays. Strong mutual coupling and finite-array edge effects limit the accuracy of conventional array factor methods, while full-wave simulation...

(This article belongs to the Special Issue Recent Advances in Antenna Design and Applications)
  • Article
  • Open Access
2 Citations
2,577 Views
18 Pages

Application of Bilinear Softening Laws and Fracture Toughness of Foamed Concrete

  • Malik Ridwan Maulana,
  • Hilton Ahmad and
  • Sugiman Sugiman

This study examined the fracture and failed performance of foamed concrete materials by testing normalized notched beams under three-point bending via three methods: inverse analysis, digital image correlation (DIC), and finite element modeling (FEM)...

(This article belongs to the Special Issue Modelling and Analysis of Concrete Degradation)
  • Article
  • Open Access
17 Citations
4,768 Views
14 Pages

15 April 2022

In order to examine the seismic behavior of high-strength steel extended end-plate connections, a three-dimensional efficient finite-element model in Abaqus was established subjected to cyclic loading at the beam end. Geometrical dimensions, boundary...

  • Article
  • Open Access
2 Citations
4,240 Views
25 Pages

Mechanical Properties of Asymmetric Woven Bamboo Structure from Bamboo Strips

  • Ekkarin Phongphinittana,
  • Navapon Klangtup and
  • Petch Jearanaisilawong

9 February 2025

The study evaluates the mechanical properties of a woven bamboo structure made from bamboo strips using an analytical relation and finite element simulation. The bamboo studied is a recently discovered species, Bambusa Nghiana, characterized by long...

(This article belongs to the Special Issue Natural Fibers for Advanced Materials: Addressing Challenges)
  • Article
  • Open Access
1 Citations
2,891 Views
20 Pages

27 December 2024

An accurate and numerically efficient description of the rolling process is a challenging task since the degree of computational accuracy is directly related to the complexity of the algorithm employed. In the most general case, finite element models...

(This article belongs to the Special Issue Numerical Simulation and Experimental Research of Metal Rolling)
  • Article
  • Open Access
4 Citations
3,456 Views
23 Pages

5 February 2023

Hydraulic fracturing is a complex nonlinear hydro-mechanical coupled process. Accurate numerical simulation is of great significance for reducing fracturing costs and improving reservoir development benefits. The aim of this paper is to propose an ef...

(This article belongs to the Special Issue Advances in Reservoir Simulation)
  • Article
  • Open Access
31 Citations
17,671 Views
18 Pages

An Incremental Mori-Tanaka Homogenization Scheme for Finite Strain Thermoelastoplasticity of MMCs

  • Heinz E. Pettermann,
  • Christopher O. Huber,
  • Mathias H. Luxner,
  • Sergio Nogales and
  • Helmut J. Böhm

13 January 2010

The present paper aims at computational simulations of particle reinforced Metal Matrix Composites as well as parts and specimens made thereof. An incremental Mori-Tanaka approach with isotropization of the matrix tangent operator is adopted. It is e...

(This article belongs to the Special Issue Composite Materials)

of 12