Skip to Content

58 Results Found

  • Article
  • Open Access
12 Citations
2,730 Views
17 Pages

15 February 2023

The surface of Inconel 625, a nickel-base alloy, was strengthened by vacuum electron beam scanning technology. The evolution of its microstructure was analyzed by electron backscatter diffraction (EBSD) and the friction and wear tester (RETC). The re...

(This article belongs to the Special Issue Advances in Laminated Metallic Composites)
  • Article
  • Open Access
10 Citations
5,374 Views
10 Pages

Nanoporous structures have a great potential for application in electronic and photonic materials, including field effect transistors, photonic crystals, and quantum dots. The control of size and shape is important for such applications. In this stud...

  • Article
  • Open Access
30 Citations
4,719 Views
21 Pages

The Impact of EBM-Manufactured Ti6Al4V ELI Alloy Surface Modifications on Cytotoxicity toward Eukaryotic Cells and Microbial Biofilm Formation

  • Patrycja Szymczyk-Ziółkowska,
  • Viktoria Hoppe,
  • Małgorzata Rusińska,
  • Jolanta Gąsiorek and ,
  • Grzegorz Ziółkowski,
  • Karolina Dydak,
  • Joanna Czajkowska and
  • Adam Junka
  • + 3 authors+ 0 author

23 June 2020

Electron beam melting (EBM) is an additive manufacturing technique, which allows forming customized implants that perfectly fit the loss of the anatomical structure of bone. Implantation efficiency depends not only on the implant’s functional or mech...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
3 Citations
3,925 Views
13 Pages

Fabrication and Characterization of Ti/TiC Composite Layers by an Electron-Beam Surface Modification

  • Stefan Valkov,
  • Daniela Nedeva,
  • Vladimir Dunchev,
  • Fatme Padikova and ,
  • Maria Ormanova,
  • Borislav Stoyanov and
  • Nikolay Nedyalkov
  • + 2 authors+ 0 author

In this study, the possibilities for modification and improvement of the surface structure and properties of titanium substrates by a formation of composite Ti/TiC layers are presented. The layers were fabricated by a two-step electron-beam surface m...

(This article belongs to the Special Issue Surface Modification for Improving the Performance of Engineering Components)
  • Article
  • Open Access
4 Citations
2,343 Views
14 Pages

26 July 2023

This paper aims to investigate the impact of beam deflection geometry on the structure, surface architecture, and friction coefficient of electron-beam-modified TC4 titanium alloys. During the experiments, the electron beam was deflected in the form...

(This article belongs to the Special Issue Size-Dependent Effects in Materials for Environmental Protection and Energy Application)
  • Article
  • Open Access
6 Citations
3,341 Views
12 Pages

Effect of Electron Beam Surface Modification on the Plasticity of Inconel Alloy 625

  • Stefan Valkov,
  • Georgi Kotlarski,
  • Stoyan Parshorov,
  • Maria Ormanova and ,
  • Borislav Stoyanov,
  • Fatme Padikova and
  • Ivan Parshorov
  • + 2 authors+ 0 author

22 February 2024

In the present work, we present results on the influence of electron beam surface modification on the resistance to plastic deformation and plasticity of Inconel alloy 625. During the treatment procedure, the electron beam currents were 10 and 20 mA,...

(This article belongs to the Special Issue Mechanical Properties and Tribological Behavior of Alloy/Coatings)
  • Feature Paper
  • Article
  • Open Access
2 Citations
1,560 Views
15 Pages

Electron Beam Surface Treatment and Its Impact on the Plasticity of Fe-Based High-Entropy Alloy

  • Stefan Valkov,
  • Georgi Kotlarski,
  • Stoyan Parshorov,
  • Maria Ormanova and ,
  • Fatme Padikova,
  • Borislav Stoyanov and
  • Ivan Parshorov
  • + 2 authors+ 0 author

17 April 2025

In this work, we present results on the impact of electron beam surface modification on the phase composition, microstructure, chemical composition, and mechanical properties of Fe-Ni-Cr-Mo-W high-entropy alloy. During the experiments, the beam power...

(This article belongs to the Section Corrosion, Wear and Erosion)
  • Article
  • Open Access
3 Citations
3,045 Views
12 Pages

Irradiation of W and K-Doped W Laminates without or with Cu, V, Ti Interlayers under a Pulsed 6 MeV Electron Beam

  • D. Ticoș,
  • M. Galaţanu,
  • A. Galaţanu,
  • M. Dumitru and ,
  • M. L. Mitu,
  • N. Udrea,
  • A. Scurtu and
  • C. M. Ticoș
  • + 3 authors+ 0 author

26 January 2022

Small multilayered laminated samples consisting of stacks of W (or K-doped W) foils without an interlayer or with interlayers from Cu, V, and Ti were exposed to a pulsed electron beam with an energy of 6 MeV in several irradiation sessions. All sampl...

(This article belongs to the Special Issue Materials Thermal Behavior during Laser or Electron Beam Irradiation)
  • Article
  • Open Access
9 Citations
4,572 Views
15 Pages

Electron-Beam Synthesis and Modification and Properties of Boron Coatings on Alloy Surfaces

  • Yury Yushkov,
  • Efim Oks,
  • Andrey Kazakov,
  • Andrey Tyunkov and
  • Denis Zolotukhin

10 October 2022

In this study, fore-vacuum plasma electron beam sources were used to deposit a few micron-thick boron coatings on A284 and ZrNb1 alloys and modify their surfaces. The coating deposition rate with a continuous 1 kW electron beam that evaporated the bo...

(This article belongs to the Special Issue Ceramic Coatings for High-Temperature Applications)
  • Article
  • Open Access
2 Citations
2,444 Views
19 Pages

Surface Modification of Diatomite-Based Micro-Arc Coatings for Magnesium Implants Using a Low-Energy High-Current Electron Beam Processing Technique

  • Mariya B. Sedelnikova,
  • Alexander D. Kashin,
  • Olga V. Bakina,
  • Pavel V. Uvarkin and ,
  • Nikita A. Luginin,
  • Yurii P. Sharkeev,
  • Margarita A. Khimich,
  • Olga V. Kazmina,
  • Edgar S. Dvilis and
  • Konstantin V. Ivanov
  • + 5 authors+ 0 author

18 February 2024

The present study showcases a novel effective technique for the surface modification of micro-arc diatomite coatings using low-energy, high-current electron beams (LEHCEBs). A variety of methods such as scanning electron microscopy, energy-dispersive...

(This article belongs to the Section Biobased and Biodegradable Metals)
  • Article
  • Open Access
8 Citations
2,535 Views
12 Pages

Surface Modification of Magnetoactive Elastomers by Laser Micromachining

  • Izidor Straus,
  • Gaia Kravanja,
  • Luka Hribar,
  • Raphael Kriegl and ,
  • Matija Jezeršek,
  • Mikhail Shamonin,
  • Irena Drevensek-Olenik and
  • Gašper Kokot
  • + 3 authors+ 0 author

28 March 2024

It has been recently demonstrated that laser micromachining of magnetoactive elastomers is a very convenient method for fabricating dynamic surface microstructures with magnetically tunable properties, such as wettability and surface reflectivity. In...

(This article belongs to the Special Issue Advanced Rubber Composites (3rd Edition))
  • Article
  • Open Access
12 Citations
3,541 Views
13 Pages

Surface Engineering of Multi-Walled Carbon Nanotubes via Ion-Beam Doping: Pyridinic and Pyrrolic Nitrogen Defect Formation

  • Petr Korusenko,
  • Ksenia Kharisova,
  • Egor Knyazev,
  • Oleg Levin and ,
  • Alexander Vinogradov and
  • Elena Alekseeva
  • + 1 author+ 0 author

8 October 2023

In this study, we present an innovative ion-beam doping technique for the controlled modification of the near-surface region of multi-walled carbon nanotubes (MWCNTs) aimed at creating pyridinic and pyrrolic nitrogen defects in their walls. This meth...

(This article belongs to the Special Issue Practical Application of Functionalized Carbon-Based Nanomaterials - Volume Ⅱ)
  • Article
  • Open Access
5 Citations
8,477 Views
9 Pages

27 November 2019

Ion beam sputter etching has been widely used in material surface modification and transmission electron microscope (TEM) sample preparation. Due to the complexity of the ion beam etching process, the quantitative simulation of ion beam sputtering is...

(This article belongs to the Section Nanotechnology and Applied Nanosciences)
  • Article
  • Open Access
2 Citations
876 Views
29 Pages

Effects of Electron Beam Hardening Parameters on the Residual Stresses and Microstructures in C45 Steel Cylindrical Specimens

  • Galya Duncheva,
  • Vladimir Dunchev,
  • Milka Atanasova,
  • Vladimir Todorov and ,
  • Yaroslav Argirov,
  • Marieta Ivanova and
  • Boris Petkov
  • + 2 authors+ 0 author

This article presents the effects of novel electron beam hardening (EBH) process parameters in terms of residual stresses (RSs) and microstructure modification in as-received C45 cylindrical specimens. The EBH was performed using continuous irradiati...

  • Article
  • Open Access
26 Citations
5,002 Views
15 Pages

Laser–Material Interactions of High-Quality Ultrashort Pulsed Vector Vortex Beams

  • Yue Tang,
  • Walter Perrie,
  • David Rico Sierra,
  • Qianliang Li and ,
  • Dun Liu,
  • Stuart P. Edwardson and
  • Geoff Dearden
  • + 2 authors+ 0 author

1 April 2021

Diffractive multi-beams based on 1 × 5 and 2 × 2 binary Dammann gratings applied to a spatial light modulator (SLM) combined with a nanostructured S-wave plate have been used to generate uniform multiple cylindrical vector beams with radial and azimu...

(This article belongs to the Special Issue Laser Micromachining)
  • Article
  • Open Access
2,773 Views
14 Pages

Research on the Mechanical Failure Risk Points of Ti/Cu/Ti/Au Metallization Layer

  • Mingrui Zhao,
  • Xiaodong Jian,
  • Si Chen,
  • Minghui Chen and ,
  • Gang Wang,
  • Tao Gong,
  • Yangning Tian,
  • Xiangjun Lu,
  • Zhenbo Zhao and
  • Xiaofeng Yang
  • + 5 authors+ 0 author

23 November 2023

The cohesive performance and durability of the bonding layer with semiconductor substrates are of paramount importance for realizing the high thermal conductivity capabilities of diamond. Utilizing electron beam evaporation and the room-temperature,...

(This article belongs to the Special Issue Residual Stress Effects in Advanced Manufacturing and Electronics Packaging)
  • Article
  • Open Access
5 Citations
1,779 Views
22 Pages

Ultrasonic Cavitation Erosion Behavior of GX40CrNiSi25-20 Cast Stainless Steel through Yb-YAG Surface Remelting

  • Daniela Cosma,
  • Ion Mitelea,
  • Ilare Bordeașu,
  • Ion Dragoș Uțu and
  • Corneliu Marius Crăciunescu

23 August 2024

Laser beam remelting is a relatively simple and highly effective technique for the physical modification of surfaces to improve resistance to cavitation erosion. In this study, we investigated the effect of laser remelting on the surface of cast stai...

(This article belongs to the Special Issue Corrosion, Fatigue and Corrosion Protection of Metals and Their Alloys in Various Environments)
  • Feature Paper
  • Article
  • Open Access
1 Citations
3,401 Views
23 Pages

Cobalt-Activated Transfer-Free Synthesis of the Graphene on Si(100) by Anode Layer Ion Source

  • Greta Bener,
  • Vitoldas Kopustinskas,
  • Asta Guobienė,
  • Andrius Vasiliauskas and ,
  • Mindaugas Andrulevičius and
  • Šarūnas Meškinis
  • + 1 author+ 0 author

29 January 2022

In this research, the graphene was grown directly on the Si(100) surface at 600 °C temperature using an anode layer ion source. The sacrificial catalytic cobalt interlayer assisted hydrocarbon ion beam synthesis was applied. Overall, two synthesi...

(This article belongs to the Section Materials Processes)
  • Feature Paper
  • Article
  • Open Access
15 Citations
3,922 Views
14 Pages

The Structure and Mechanical Properties of Hemp Fibers-Reinforced Poly(ε-Caprolactone) Composites Modified by Electron Beam Irradiation

  • Rafał Malinowski,
  • Aneta Raszkowska-Kaczor,
  • Krzysztof Moraczewski,
  • Wojciech Głuszewski and ,
  • Volodymyr Krasinskyi and
  • Lauren Wedderburn
  • + 1 author+ 0 author

8 June 2021

The need for the development of new biodegradable materials and modification of the properties the current ones possess has essentially increased in recent years. The aim of this study was the comparison of changes occurring in poly(ε-caprolactone) (...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
6 Citations
2,199 Views
15 Pages

Carbon Transformation Induced by High Energy Excimer Treatment

  • Nikola Slepičková Kasálková,
  • Klaudia Hurtuková,
  • Dominik Fajstavr,
  • Ladislav Lapčák and ,
  • Petr Sajdl,
  • Zdeňka Kolská,
  • Václav Švorčík and
  • Petr Slepička
  • + 3 authors+ 0 author

30 June 2022

The main aim of this study was to describe the treatment of carbon sheet with a high-energy excimer laser. The excimer modification changed the surface chemistry and morphology of carbon. The appearance of specific carbon forms and modifications have...

(This article belongs to the Special Issue Functional Carbon-Based Nanomaterials and Nanocomposites)
  • Article
  • Open Access
17 Citations
2,861 Views
16 Pages

8 July 2022

To improve the flexural properties of cemented soils reinforced with fibers and avoid their brittle failure when subjected to complex loading conditions, a simple and cost-effective technique was explored to facilitate their application in retaining...

(This article belongs to the Topic Fiber-Reinforced Cementitious Composites)
  • Article
  • Open Access
12 Citations
2,488 Views
18 Pages

Investigation of Surface Modification of Bagasse Fibers: Performance of Asphalt Binders/Mixtures with Bagasse Fibers

  • Haiwei Xie,
  • Yixuan Jia,
  • Chunsheng Zhu,
  • Weidong Liu and ,
  • Zuzhong Li and
  • Zhipeng Huang
  • + 1 author+ 0 author

The influence of surface modification on the properties of bagasse fibers and asphalt binders/mixtures was investigated. Bagasse fibers were modified by single, binary, and ternary methods with hydrochloric acid, sodium hydroxide, and sodium chlorite...

  • Article
  • Open Access
5 Citations
4,615 Views
17 Pages

Early Peri-Implant Bone Healing on Laser-Modified Surfaces with and without Hydroxyapatite Coating: An In Vivo Study

  • Ana Flávia Piquera Santos,
  • Rodrigo Capalbo da Silva,
  • Henrique Hadad,
  • Laís Kawamata de Jesus and ,
  • Maísa Pereira-Silva,
  • Heloisa Helena Nímia,
  • Sandra Helena Penha Oliveira,
  • Antônio Carlos Guastaldi,
  • Thallita Pereira Queiroz and
  • Francisley Ávila Souza
  • + 10 authors+ 5 authors

17 July 2024

(1) Objective: The aim of this study was to assess the biological behavior of bone tissue on a machined surface (MS) and modifications made by a laser beam (LS) and by a laser beam incorporated with hydroxyapatite (HA) using a biomimetic method witho...

(This article belongs to the Special Issue Novel Insights of Bone Repair: Strategies for Improvement, Microscopic, Molecular and Ultrastrastructural Aspects)
  • Article
  • Open Access
11 Citations
3,939 Views
13 Pages

18 February 2021

This paper analyses the possibility of obtaining surface-infused nano gold particles with the polyether ether ketone (PEEK) using picosecond laser treatment. To fuse particles into polymer, the raw surface of PEEK was sputtered with 99.99% Au and mic...

(This article belongs to the Special Issue Advanced Biomaterials for Medical Applications)
  • Feature Paper
  • Article
  • Open Access
15 Citations
3,702 Views
12 Pages

Ultrashort Laser Texturing of Superelastic NiTi: Effect of Laser Power and Scanning Speed on Surface Morphology, Composition and Wettability

  • Carlo Alberto Biffi,
  • Jacopo Fiocchi,
  • Marzio Rancan,
  • Sofia Gambaro and ,
  • Francesca Cirisano,
  • Lidia Armelao and
  • Ausonio Tuissi
  • + 2 authors+ 0 author

13 February 2023

Among metallic biomaterials, near-equiatomic NiTi is one of the most promising intermetallic system applicable for biomedical applications, thanks to its high biocompatibility and unique superelasticity (or pseudoelasticity), offering a complete reco...

(This article belongs to the Special Issue Trends in Technology of Surface Engineering of Metals and Alloys)
  • Article
  • Open Access
7 Citations
4,428 Views
10 Pages

In this paper, surfaces of thin films prepared from blends of collagen, hyaluronic acid, and chitosan and modified by neodymium laser radiation were researched. To evaluate the laser beam effect on the surface structure, scanning electron microscopy...

(This article belongs to the Special Issue Chitin and Collagen: Isolation, Purification, Characterization, and Applications)
  • Article
  • Open Access
9 Citations
3,230 Views
16 Pages

29 January 2022

Modification of natural polymers for applications in the treatment of waste and surface waters is a continuous concern of researchers and technologists in close relation to the advantages they provide as related to classical polymeric flocculants. In...

(This article belongs to the Special Issue Materials Thermal Behavior during Laser or Electron Beam Irradiation)
  • Article
  • Open Access
25 Citations
5,406 Views
22 Pages

Mechanical Properties and Residual Stress Measurements of Grade IV Titanium and Ti-6Al-4V and Ti-13Nb-13Zr Titanium Alloys after Laser Treatment

  • Magdalena Jażdżewska,
  • Dominika Beata Kwidzińska,
  • Wiktor Seyda,
  • Dariusz Fydrych and
  • Andrzej Zieliński

22 October 2021

Nowadays, surface engineering focuses on research into materials for medical applications. Titanium and its alloys are prominent, especially Ti-6Al-4V and Ti-13Nb-13Zr. Samples made of pure grade IV titanium and the titanium alloys Ti-6Al-4V and Ti-1...

(This article belongs to the Special Issue Titanium and Titanium Based Materials in Biomedical Applications)
  • Article
  • Open Access
1 Citations
438 Views
20 Pages

GA/KH792 Surface Chemical Co-Modification for Enhancing Performance and Interfacial Properties of PET Fiber-Reinforced Asphalt Mastic

  • Yingdong Zhao,
  • Jiefen Kang,
  • Yanan Guo,
  • Yongling Ding and ,
  • Huiling Yu,
  • Qinxi Dong,
  • Huadong Sun,
  • Wenshu Cheng,
  • Shuhua Song and
  • Kunpeng Zhao
  • + 6 authors+ 1 author

11 June 2026

Polyester (PET) fibers are widely used to reinforce asphalt materials; however, their smooth and hydrophobic surfaces limit interfacial bonding and restrict their reinforcing efficiency. This study develops an eco-friendly surface modification method...

(This article belongs to the Section Functional Polymer Coatings and Films)
  • Article
  • Open Access
226 Views
26 Pages

11 October 2026

Ion irradiation is a unique approach for modulating the morphology and properties of nanowires (NWs). However, the ion-solid interaction and the microstructural evolution of NWs during ion beam processing remain to be further elucidated. In this work...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
17 Citations
4,989 Views
24 Pages

Electrochemical, Tribological and Biocompatible Performance of Electron Beam Modified and Coated Ti6Al4V Alloy

  • Maria Nikolova,
  • Maria Ormanova,
  • Veselina Nikolova and
  • Margarita D. Apostolova

Vacuum cathodic arc TiN coatings with overlaying TiO2 film were deposited on polished and surface roughened by electron beam modification (EBM) Ti6Al4V alloy. The substrate microtopography consisted of long grooves formed by the liner scan of the ele...

(This article belongs to the Special Issue Biomaterials for Bone Tissue Engineering 2.0)
  • Article
  • Open Access
5 Citations
4,986 Views
16 Pages

FIB-SEM Investigation of Laser-Induced Periodic Surface Structures and Conical Surface Microstructures on D16T (AA2024-T4) Alloy

  • Igor A. Salimon,
  • Sakellaris Mailis,
  • Alexey I. Salimon,
  • Evgenij Skupnevskiy and ,
  • Svetlana A. Lipovskikh,
  • Iaroslava Shakhova,
  • Artem V. Novikov,
  • Timur F. Yagafarov and
  • Alexander M. Korsunsky
  • + 4 authors+ 0 author

17 January 2020

The use of aluminum alloy AA2024-T4 (Russian designation D16T) in applications requiring a high strength-to-weight ratio and fatigue resistance such as aircraft fuselage often demands the control and modification of surface properties. A promising ro...

(This article belongs to the Special Issue Advanced Surface Enhancement)
  • Article
  • Open Access
10 Citations
2,797 Views
15 Pages

Influence of Interfacial Interaction and Composition on Fracture Toughness and Impact Properties of Carbon Fiber-Reinforced Polyethersulfone

  • Valerii G. Torokhov,
  • Dilyus I. Chukov,
  • Victor V. Tcherdyntsev,
  • Andrey A. Stepashkin and
  • Mikhail Y. Zadorozhnyy

21 March 2024

In this study, the interlaminar fracture toughness and impact strength of polyethersulfone reinforced with continuous carbon fibers were studied. Interlaminar fracture toughness tests were performed using the double cantilever beam method. It was sho...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
10 Citations
4,286 Views
10 Pages

Development of a Surface-Functionalized Titanium Implant for Promoting Osseointegration: Surface Characteristics, Hemocompatibility, and In Vivo Evaluation

  • Ping-Jen Hou,
  • Syamsiah Syam,
  • Wen-Chien Lan,
  • Keng-Liang Ou and ,
  • Bai-Hung Huang,
  • Ka-Chun Chan,
  • Chi-Hsun Tsai,
  • Takashi Saito,
  • Chung-Ming Liu and
  • Fang-Yu Fan
  • + 7 authors+ 2 authors

30 November 2020

This study aimed to evaluate the impact of surface-modified biomedical titanium (Ti) dental implant on osseointegration. The surfaces were modified using an innovative dip-coating technique (IDCT; sandblasted, large-grit, and acid-etched, then follow...

(This article belongs to the Special Issue Application of the Biocomposite Materials on Bone Reconstruction)
  • Feature Paper
  • Article
  • Open Access
1 Citations
872 Views
9 Pages

Surface Evolution and Performance of 45CrNiMoV Steel Modified by Electron Beam Irradiation

  • Huihui Wang,
  • Fuquan Long,
  • Zhisen Liang,
  • Shangfeng Cai and ,
  • Rujin Lv and
  • Shengzhi Hao
  • + 1 author+ 0 author

16 November 2025

Enhancing the surface mechanical properties and extending the service life of 45CrNiMoV mold steel are critical goals in mold development. To achieve these objectives, electron beam (EB) irradiation was employed to treat the 45CrNiMoV mold steel. Thi...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
7 Citations
3,557 Views
11 Pages

Air Pressure, Gas Exposure and Electron Beam Irradiation of 2D Transition Metal Dichalcogenides

  • Antonio Di Bartolomeo,
  • Aniello Pelella,
  • Alessandro Grillo,
  • Francesca Urban and
  • Filippo Giubileo

23 August 2020

In this study, we investigate the electrical transport properties of back-gated field-effect transistors in which the channel is realized with two-dimensional transition metal dichalcogenide nanosheets, namely palladium diselenide (PdSe2) and molybde...

(This article belongs to the Special Issue 10th Anniversary of Applied Sciences: Invited Papers in Materials)
  • Article
  • Open Access
75 Citations
12,982 Views
14 Pages

19 October 2015

In this work we aim to show that the overall surface potential is a key factor to understand and predict anti-fouling characteristics of a polymer membrane. Therefore, polyvinylidene fluoride membranes were modified by electron beam-induced grafting...

(This article belongs to the Special Issue Polymer Thin Films and Membranes 2015)
  • Article
  • Open Access
24 Citations
7,045 Views
16 Pages

Laser-Induced Selective Electroless Plating on PC/ABS Polymer: Minimisation of Thermal Effects for Supreme Processing Speed

  • Karolis Ratautas,
  • Vytautas Vosylius,
  • Aldona Jagminienė,
  • Ina Stankevičienė and ,
  • Eugenijus Norkus and
  • Gediminas Račiukaitis
  • + 1 author+ 0 author

21 October 2020

The selective surface activation induced by laser (SSAIL) for electroless copper deposition on Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is one of the promising techniques of electric circuit formation on free-shape dielectric surf...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
8 Citations
2,923 Views
14 Pages

Investigations on Caesium Dispersion and Molybdenum Coating on SPIDER Components

  • Valentina Candela,
  • Caterina Cavallini,
  • Claudia Gasparrini,
  • Lidia Armelao and ,
  • Valeria Candeloro,
  • Mauro Dalla Palma,
  • Michele Fadone,
  • Diego Marcuzzi,
  • Mauro Pavei and
  • Piergiorgio Sonato
  • + 14 authors+ 9 authors

26 December 2022

SPIDER is the 100 keV full-size Negative Ion Source prototype of the ITER Neutral Beam Injector, operating at Consorzio RFX in Padova, Italy. The largest Negative Ion Source in the world, SPIDER generates an RF driven plasma from which Deuterium or H...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
19 Citations
3,404 Views
14 Pages

Estradiol Removal by Adsorptive Coating of a Microfiltration Membrane

  • Zahra Niavarani,
  • Daniel Breite,
  • Andrea Prager,
  • Bernd Abel and
  • Agnes Schulze

30 January 2021

This work demonstrates the enhancement of the adsorption properties of polyethersulfone (PES) microfiltration membranes for 17β-estradiol (E2) from water. This compound represents a highly potent endocrine-disrupting chemical (EDC). The PES membranes...

(This article belongs to the Section Membrane Applications)
  • Article
  • Open Access
9 Citations
3,258 Views
13 Pages

1 December 2019

Modified titania photocatalyst powder samples were prepared using the sol-gel method for copper (Cu) and cerium (Ce) doping and impregnation for platinum (Pt) loading. Their bulk crystalline structures were investigated using X-ray diffractometry (XR...

(This article belongs to the Section Photocatalysis)
  • Article
  • Open Access
27 Citations
3,341 Views
20 Pages

Modification Mechanism and Rheological Properties of Emulsified Asphalt Evaporative Residues Reinforced by Coupling-Modified Fiber

  • Zhaofeng Lu,
  • Lin Kong,
  • Zhaoyi He,
  • Hao Xu and ,
  • Kang Yang,
  • Zuzhen Shen and
  • Zhaodong Huang
  • + 2 authors+ 0 author

30 November 2021

In order to solve the problems of the smooth surface of basalt fiber and its weak interfacial adhesion with emulsified asphalt cold recycled mixture, a silane coupling agent (KH550) was used to treat the surface of basalt fiber and the effects of tre...

  • Article
  • Open Access
45 Citations
4,689 Views
15 Pages

Mitigating the Agglomeration of Nanofiller in a Mixed Matrix Membrane by Incorporating an Interface Agent

  • Manh-Tuan Vu,
  • Gloria M. Monsalve-Bravo,
  • Rijia Lin,
  • Mengran Li and ,
  • Suresh K. Bhatia and
  • Simon Smart
  • + 1 author+ 0 author

Nanodiamonds (ND) have recently emerged as excellent candidates for various applications including membrane technology due to their nanoscale size, non-toxic nature, excellent mechanical and thermal properties, high surface areas and tuneable surface...

(This article belongs to the Section Inorganic Membranes)
  • Article
  • Open Access
3 Citations
2,005 Views
12 Pages

Multi-Scale Structuring of CoCrMo and AZ91D Magnesium Alloys Using Direct Laser Interference Patterning

  • Bruno Henriques,
  • Douglas Fabris,
  • Bogdan Voisiat and
  • Andrés Fabián Lasagni

8 July 2023

In this work, the technique of Direct Laser Interference Patterning (DLIP) was used to fabricate micrometric structures at the surface of Cobalt-Chromium-Molybdenum and AZ91D magnesium alloys. Line-like patterns with spatial periods of 5 μm were t...

  • Article
  • Open Access
324 Views
25 Pages

18 October 2026

Natural fibre-reinforced polymer composites are gaining considerable attention as sustainable alternatives to fully synthetic composites because of their low density, renewability, and favourable specific mechanical properties. However, the hydrophil...

  • Review
  • Open Access
97 Citations
11,707 Views
31 Pages

Focused Electron Beam-Based 3D Nanoprinting for Scanning Probe Microscopy: A Review

  • Harald Plank,
  • Robert Winkler,
  • Christian H. Schwalb,
  • Johanna Hütner and ,
  • Jason D. Fowlkes,
  • Philip D. Rack,
  • Ivo Utke and
  • Michael Huth
  • + 3 authors+ 0 author

30 December 2019

Scanning probe microscopy (SPM) has become an essential surface characterization technique in research and development. By concept, SPM performance crucially depends on the quality of the nano-probe element, in particular, the apex radius. Now, with...

(This article belongs to the Special Issue Multi-Dimensional Direct-Write Nanofabrication )
  • Article
  • Open Access
311 Views
28 Pages

11 September 2026

The surface activation of industrial-grade unidirectional (UD) carbon fiber (CF) textiles by nitrogen-based Atmospheric Pressure Plasma Jet (APP Jet) treatment is investigated for application in CF UD/bio-epoxy composite laminates. A systematic param...

(This article belongs to the Special Issue Plasma Applications in Material Processing)
  • Article
  • Open Access
2 Citations
2,379 Views
10 Pages

Nanofabrication of Bulk Diffraction Nanogratings via Direct Ultrashort-Pulse Laser Micro-Inscription in Elastomers and Heat-Shrinkable Polymers

  • Vladimir Kesaev,
  • Alexey Rupasov,
  • Nikita Smirnov,
  • Petr Pakholchuk and ,
  • Sergey Kudryashov and
  • Galina Odintsova
  • + 1 author+ 0 author

12 April 2023

Optical-range bulk diffraction nanogratings were fabricated via challenging direct inscription by ultrashort (femtosecond, fs) laser pulses inside heat-shrinkable polymers (thermoplastics) and VHB 4905 elastomer. The inscribed bulk material modificat...

(This article belongs to the Section Nanophotonics Materials and Devices)
  • Article
  • Open Access
26 Citations
6,594 Views
19 Pages

Hierarchical Micro-/Nano-Structures on Polycarbonate via UV Pulsed Laser Processing

  • Marek Mezera,
  • Sabri Alamri,
  • Ward A.P.M. Hendriks,
  • Andreas Hertwig and ,
  • Anna Maria Elert,
  • Jörn Bonse,
  • Tim Kunze,
  • Andrés Fabián Lasagni and
  • Gert-willem R.B.E. Römer
  • + 4 authors+ 0 author

17 June 2020

Hierarchical micro/-nanostructures were produced on polycarbonate polymer surfaces by employing a two-step UV-laser processing strategy based on the combination of Direct Laser Interference Patterning (DLIP) of gratings and pillars on the microscale...

(This article belongs to the Special Issue Laser-Generated Periodic Nanostructures)
  • Article
  • Open Access
9 Citations
2,997 Views
19 Pages

27 September 2023

The laser sintering process and modification of yttria-stabilized zirconia (YSZ) coatings subjected to electrophoretic deposition (EPD) on YSZ air-plasma-sprayed (APS) thermal barrier coatings (TBCs) were investigated. A Ni-based superalloy was plasm...

(This article belongs to the Special Issue Advances in Thermal Barrier Coatings (TBCs): Materials, Fabrication, Corrosion and Applications)

of 2