Skip to Content

20,358 Results Found

  • Article
  • Open Access
1 Citations
2,155 Views
20 Pages

Local overheating in cavities seriously threatens the safe operation of scramjet engines. To investigate the formation mechanism and control methods of local overheating, this paper conducts numerical simulations on the cooling process of cavity sudd...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
4 Citations
4,220 Views
11 Pages

Study of the Technologies for Freeze Protection of Cooling Towers in the Solar System

  • Jingnan Liu,
  • Lixin Zhang,
  • Yongbao Chen,
  • Zheng Yin and ,
  • Yan Shen and
  • Yuedong Sun
  • + 1 author+ 0 author

19 December 2022

A cooling tower is an important guarantee for the proper operation of a solar system. To ensure proper operation of the system and to maintain high-efficiency points, the cooling tower must operate year-round. However, freezing is a common problem th...

(This article belongs to the Special Issue Advances in Solar Thermal Technologies: Renewable Energy Conversion and Utilization)
  • Article
  • Open Access
13 Citations
3,326 Views
17 Pages

Previous studies have shown that the amount of energy consumed by mechanical cooling can be significantly reduced by the indirect evaporative cooling (IEC) process. By increasing the heat recovery efficiency of air handling units (AHUs), sensible coo...

(This article belongs to the Special Issue Healthy, Digital and Sustainable Buildings and Cities)
  • Article
  • Open Access
6 Citations
3,819 Views
22 Pages

23 August 2021

This article is focused on the research of passive cooling beams and increasing their cooling capacity. A passive cooling beam with four tubes was chosen as a model. A mathematical model was built using the corresponding criterion equations to captur...

(This article belongs to the Special Issue Experimental and Numerical Methods in Fluid Mechanics and Energy)
  • Article
  • Open Access
332 Views
26 Pages

Cooling Performance Prediction Model of Indirect Dry Cooling System in Power Plants

  • Hui Wang,
  • Jianhui Zeng,
  • Xinning Song,
  • Zhanyang Li and ,
  • Xiaopeng Wu and
  • Lei Chen
  • + 1 author+ 0 author

3 October 2026

Indirect dry cooling systems are key cooling equipment in water-scarce power plants, and their cooling performance is strongly affected by ambient temperature and crosswind. Reliable performance prediction under variable meteorological conditions is...

(This article belongs to the Topic Heat and Mass Transfer in Engineering)
  • Feature Paper
  • Article
  • Open Access
3 Citations
3,245 Views
18 Pages

A Novel Temperature-Independent Model for Estimating the Cooling Energy in Residential Homes for Pre-Cooling and Solar Pre-Cooling

  • Simon Heslop,
  • Baran Yildiz,
  • Mike Roberts,
  • Dong Chen and ,
  • Tim Lau,
  • Shayan Naderi,
  • Anna Bruce,
  • Iain MacGill and
  • Renate Egan
  • + 4 authors+ 0 author

6 December 2022

Australia’s electricity networks are experiencing low demand during the day due to excessive residential solar export and high demand during the evening on days of extreme temperature due to high air conditioning use. Pre-cooling and solar pre-coolin...

(This article belongs to the Special Issue Energy Efficiency and Optimization Strategies in Buildings for a Sustainable Future)
  • Article
  • Open Access
39 Citations
9,051 Views
20 Pages

21 October 2021

Thanks to recent advances in nanophotonics and scalable manufacturing of metamaterials, radiative sky cooling has emerged as a “self-reliant” cooling technology with various potential applications. However, not every region across the globe is well s...

(This article belongs to the Section Meteorology)
  • Article
  • Open Access
14 Citations
8,278 Views
17 Pages

15 June 2024

Optimizing the design of the conformal cooling channel can increase the cooling rate of injection mold. The aim of this study was the problem of low cooling efficiency of injection mold for deep-cavity plastic parts under the conventional cooling cha...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
20 Citations
4,650 Views
19 Pages

5 September 2020

This paper presents a numerical investigation on the combined influences of film cooling and thermal barrier coatings (TBCs) on the cooling performances of a NASA C3X guide vane. The results show that: (1) film cooling on the pressure side is more ef...

  • Article
  • Open Access
26 Citations
11,447 Views
21 Pages

23 June 2023

Injection molding is widely used in the manufacturing process of plastic products. The injection molding process aims to increase productivity, which is impacted by factors such as cooling time, the temperature distribution of plastic parts, thermal...

(This article belongs to the Special Issue Practical Applications of New Optimization Methods and Intelligent Control)
  • Proceeding Paper
  • Open Access
1,224 Views
6 Pages

26 October 2023

In this paper, we consider the analysis of temperature area heterogeneity in evaporative cooling towers of various types. An experimental study of cooling heterogeneity in several cooling towers was carried out. Cooled-water temperature distribution...

(This article belongs to the Proceedings of The 4th International Electronic Conference on Applied Sciences)
  • Article
  • Open Access
9 Citations
3,242 Views
17 Pages

5 December 2022

Thermoelectric technology has been developed as a substitute for existing refrigerants in heating, ventilation, and air-conditioning system applications for building decarbonization. A hydraulic thermoelectric radiant cooling panel (hTERCP) operated...

  • Article
  • Open Access
7 Citations
4,615 Views
17 Pages

Economic and Technical Analysis of a Hybrid Dry Cooling Cycle to Replace Conventional Wet Cooling Towers for High Process Cooling Loads

  • Aqeel Ahmad Taimoor,
  • Usman Saeed,
  • Sami-ullah Rather,
  • Saad Al-Shahrani and ,
  • Hisham S. Bamufleh,
  • Hesham Alhumade,
  • Aliyu Adebayo Sulaimon,
  • Walid M. Alalayah and
  • Azmi Mohd Shariff
  • + 4 authors+ 0 author

27 October 2022

Scarcity has made fresh water too economically and socially too valuable to be used by the processing industry without restriction. Wet evaporative cooling cycles offer competitive advantages in terms of CoP compared to other cooling cycles with rela...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Article
  • Open Access
3 Citations
4,386 Views
16 Pages

Ammonia Airship Cooling: An Option for Renewable Cooling in the Tropics

  • Julian David Hunt,
  • Behnam Zakeri,
  • Andreas Nascimento,
  • Fei Guo and ,
  • Marcos Aurélio Vasconcelos de Freitas,
  • Cristiano Vitorino Silva and
  • Bas van Ruijven
  • + 2 authors+ 0 author

24 December 2023

The world is warming, and the demand for cooling is increasing. Developing a future green hydrogen economy will also increase the demand for cooling for hydrogen liquefaction. This increase in cooling demand will happen mainly in tropical and develop...

(This article belongs to the Section L: Energy Sources)
  • Review
  • Open Access
43 Citations
15,606 Views
13 Pages

Personal Cooling Garments: A Review

  • Song Ren,
  • Mengyao Han and
  • Jian Fang

16 December 2022

Thermal comfort is of critical importance to people during hot weather or harsh working conditions to reduce heat stress. Therefore, personal cooling garments (PCGs) is a promising technology that provides a sustainable solution to provide direct the...

(This article belongs to the Special Issue Smart Textile and Polymer Materials)
  • Article
  • Open Access
7 Citations
3,443 Views
15 Pages

Extending Cooling Rate Performance of Fast Scanning Chip Calorimetry by Liquid Droplet Cooling

  • Evgeny Zhuravlev,
  • Jing Jiang,
  • Dongshan Zhou,
  • René Androsch and
  • Christoph Schick

23 April 2021

The liquid droplet cooling technique for fast scanning chip calorimetry (FSC) is introduced, increasing the cooling rate for large samples on a given sensor. Reaching higher cooling rates and using a gas as the cooling medium, the common standard for...

(This article belongs to the Section Chemical and Molecular Sciences)
  • Review
  • Open Access
83 Citations
29,300 Views
31 Pages

Recent Developments in Cooling Systems and Cooling Management for Electric Motors

  • Dmytro Konovalov,
  • Ignat Tolstorebrov,
  • Trygve Magne Eikevik,
  • Halina Kobalava and ,
  • Mykola Radchenko,
  • Armin Hafner and
  • Andrii Radchenko
  • + 2 authors+ 0 author

9 October 2023

This study provides an overview of new trends in the development of cooling systems for electric motors. It includes a summary of academic research and patents for cooling systems implemented by leading motor manufacturers at TRL9. New trends in the...

(This article belongs to the Section E: Electric Vehicles)
  • Article
  • Open Access
12 Citations
4,165 Views
32 Pages

13 June 2023

Demand for space cooling systems is growing worldwide. The main reasons are socioeconomic developments such as the growing world population and the rise of economic wealth, especially in developing countries. These developments run simultaneously wit...

(This article belongs to the Topic Advances in Solar Heating and Cooling)
  • Article
  • Open Access
9 Citations
3,870 Views
15 Pages

5 April 2023

Shaped cooling holes have received considerable attention in recent years due to their potential to improve heat transfer while minimizing pressure drop. In this study, the effects of lobe-shaped cooling holes on film cooling performance and turbulen...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
1,321 Views
21 Pages

30 October 2025

Increasingly stringent energy directives of the European Union, combined with rising cooling demands due to climate change, urge the investigation of energy-efficient cooling solutions. Free cooling offers a viable approach to reducing energy consump...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
1 Citations
2,027 Views
22 Pages

The Heat Exchange Coefficient of the Cooling Tube Under the Influence of the Tube Material and Cooling Water Parameters

  • Hong Zhang,
  • Qiuliang Long,
  • Fengqi Guo,
  • Zhaolong Shen and ,
  • Xu Chen,
  • Ran Yu and
  • Yonggang Wang
  • + 2 authors+ 0 author

11 June 2025

The traditional finite element method deals with the temperature field around the cooling tube due to the computational efficiency problems caused by grid division and the uncertainty of the convective heat transfer coefficient, resulting in inaccura...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
2 Citations
3,355 Views
18 Pages

A New Method of Regulating the Cooling Capacity of a Cooling System with CO2

  • Artur Bieniek,
  • Jan Kuchmacz,
  • Karol Sztekler,
  • Lukasz Mika and
  • Ewelina Radomska

31 March 2021

New guidelines set by international organizations for refrigeration companies cause that natural working fluids such as carbon dioxide are increasingly used in new refrigeration systems. Carbon dioxide (R-744) is used in freezing, cooling, or air con...

(This article belongs to the Special Issue Alternative and Emerging Cooling and Heating Technologies)
  • Article
  • Open Access
1 Citations
3,504 Views
22 Pages

Development and Characterisation of a New Die-Casting Die Cooling System Based on Internal Spray Cooling

  • Alexander Haban,
  • Stefanie Felicia Kracun,
  • Danny Noah Rohde and
  • Martin Fehlbier

23 August 2024

Against the backdrop of climate policy goals and the EU’s aim for a resource-efficient economy, the foundry industry must rethink product range, energy consumption, and production technologies. Light metal casting, which is performed through pr...

(This article belongs to the Special Issue Casting Process, Processing Deformation and Microstructure Optimization of Advanced Metallic Materials)
  • Article
  • Open Access
12 Citations
3,529 Views
18 Pages

Film cooling is widely applied as an effective way to maintain the turbine blade temperature at an acceptable level. The present paper investigates the overall cooling effectiveness and flow structure by performing conjugate heat transfer simulations...

(This article belongs to the Section Electromechanical Energy Conversion Systems)
  • Article
  • Open Access
4 Citations
2,844 Views
11 Pages

Optomechanical systems are suitable for realizing the ground-state cooling of macroscopic objects. Based on a dynamical approach that goes beyond the validity of the standard linearization approach, we simulate the detailed cooling processes for a me...

(This article belongs to the Special Issue Nonlinear and Quantum Optics in Coupled Structures: Fundamentals and Applications)
  • Article
  • Open Access
1 Citations
2,081 Views
11 Pages

17 December 2025

Heat exposure in summer increases the risk of heat strain during work and rest, highlighting the need for effective cooling strategies. This study evaluated the cooling effectiveness of a fan-cooling jacket (FC) and a thermoelectric neck cooler (NC)...

(This article belongs to the Special Issue Advances in Smart Textiles)
  • Proceeding Paper
  • Open Access
2 Citations
2,772 Views
7 Pages

Reducing the Cooling Energy Consumption of Telecom Sites by Liquid Cooling

  • Jari Huttunen,
  • Olli Salmela,
  • Topi Volkov and
  • Eva Pongrácz

11 September 2020

The use of mobile data has increased and will continue to increase in the future, because more data is moving to wireless networks such as 5G. Cooling energy need is also expected to increase in indoor telecom rooms, and can be as high as the equipme...

(This article belongs to the Proceedings of The First World Energies Forum—Current and Future Energy Issues)
  • Article
  • Open Access
29 Citations
10,333 Views
14 Pages

30 October 2023

In this study, the effects of battery thermal management (BTM), pumping power, and heat transfer rate were compared and analyzed under different operating conditions and cooling configurations for the liquid cooling plate of a lithium-ion battery. Th...

(This article belongs to the Special Issue Thermal Management System for Lithium-Ion Batteries)
  • Article
  • Open Access
6 Citations
3,867 Views
16 Pages

29 November 2019

In air-cooled power units, an air-cooled condenser (ACC) is usually accompanied by mechanical draft wet-cooling towers (MCTs) so as to meet the severe cooling requirements of air-cooling auxiliary apparatuses, such as water ring vacuum pumps. When ru...

(This article belongs to the Special Issue Application of Power Electronics Converters in Smart Grids and Renewable Energy Systems)
  • Article
  • Open Access
27 Citations
4,019 Views
15 Pages

Cooling Potential of Ship Engine Intake Air Cooling and Its Realization on the Route Line

  • Zongming Yang,
  • Roman Radchenko,
  • Mykola Radchenko,
  • Andrii Radchenko and
  • Victoria Kornienko

14 November 2022

A fuel efficiency of a ship engine increases with cooling inlet air. This might be performed by the chillers, which transform the heat of engine exhaust gas and scavenge air for refrigeration. The effect gained due to cooling depends on the intake ai...

(This article belongs to the Special Issue Selected Papers from the 10th European Conference on Renewable Energy Systems)
  • Article
  • Open Access
7 Citations
5,245 Views
19 Pages

20 October 2022

This study compares the performance according to a working fluid, the number of battery cooling block ports, and header width required for cooling according to the application of the direct contact single-phase battery cooling method in a 1S16P batte...

(This article belongs to the Special Issue Thermal Management System for Lithium-Ion Batteries)
  • Article
  • Open Access
14 Citations
4,726 Views
15 Pages

22 December 2020

Ceiling radiant cooling panel (CRCP) systems are being increasingly applied to commercial buildings due to their high thermal comfort level and energy efficiency. It is recommended that CRCP systems should be operated at a relatively high chilled wat...

(This article belongs to the Special Issue Novel Systems for the Era of Zero-Energy Buildings)
  • Article
  • Open Access
13 Citations
5,774 Views
27 Pages

24 April 2023

In light of energy and climate targets, free cooling unlocks a major resource-saving potential compared to refrigeration. To fill the knowledge gap in quantifying this saving potential, we aim to specify the physical and technical limits of cooling t...

(This article belongs to the Special Issue Advanced Heat Transfer and Energy Saving Technology)
  • Article
  • Open Access
6 Citations
4,590 Views
13 Pages

2 October 2021

A combined circulation system of spray evaporative cooling and air cooling (CCSSECAC) is a way to enhance the cooling performance of an air-cooled electric machine while maintaining its existing structure. Based on a traditional air-cooled machine, w...

(This article belongs to the Special Issue Design, Concepts and Applications of Electric Machines)
  • Article
  • Open Access
10 Citations
2,824 Views
13 Pages

Passive-Cooling Building Coating with Efficient Cooling Performance and Excellent Superhydrophobicity

  • Xiaowei Yang,
  • Defeng Yan,
  • Yi Lu,
  • Yulin Shang and ,
  • Jing Sun and
  • Jinlong Song
  • + 1 author+ 0 author

25 July 2023

Passive-cooling building materials can achieve cooling without external energy consumption, which is an energy-saving and environmentally friendly cooling method. However, the existing passive-cooling building materials have the limitations of high c...

(This article belongs to the Special Issue Science and Technology for Silicate-Based Construction and Building Materials)
  • Article
  • Open Access
11 Citations
4,106 Views
20 Pages

Cooling Potential for Single and Advanced Absorption Cooling Systems in a Geothermal Field in Mexico

  • Juliana Saucedo-Velázquez,
  • Geydy Gutiérrez-Urueta,
  • Jorge Alejandro Wong-Loya,
  • Ricardo Molina-Rodea and
  • Wilfrido Rivera Gómez Franco

17 March 2022

Climate change is one of the main problems humanity is currently facing due to the use of fossil fuels. At present, 20% of the total electricity consumed in buildings worldwide is for air conditioning. The development and use of thermally driven cool...

(This article belongs to the Special Issue Thermodynamics: Modeling and Simulation)
  • Article
  • Open Access
1 Citations
1,661 Views
20 Pages

Study of the Cooling Performance of Electric Vehicle Motors Using a Centripetal-Inclined Oil Spray Cooling System

  • Jinchi Hou,
  • Jianping Li,
  • Junqiu Li,
  • Jingyi Ruan and ,
  • Hao Qu and
  • Hanjun Luo
  • + 1 author+ 0 author

23 January 2026

Efficient cooling systems are crucial for achieving high efficiency and power density in electric vehicle motors. To enhance motor cooling performance, a novel oil spray cooling system was developed, referred to as the centripetal-inclined oil spray...

(This article belongs to the Section E: Electric Vehicles)
  • Article
  • Open Access
7 Citations
1,731 Views
16 Pages

27 March 2025

Passive radiation cooling technology, as a new zero-energy refrigeration technology method, has received widespread attention in recent years. However, due to differences in the testing devices used by different teams, it becomes difficult to directl...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
24 Citations
6,062 Views
17 Pages

15 March 2017

Generally, Central Asia is typical for regions with strong solar radiation and various natural cooling sources. The heat gain from the building envelope accounts for a large part of the cooling load there. Thus, the pipe-embedded envelope is receivin...

(This article belongs to the Special Issue The 1st “The Belt and Road Initiative” International Conference on Sustainable Refrigeration and Air Conditioning)
  • Review
  • Open Access
116 Citations
27,887 Views
64 Pages

13 January 2019

A review of current and future district cooling (DC) technologies, operational, economic, and environmental aspects, and analysis and optimization methodologies is presented, focusing on the demands of cooling-dominated regions. Sustainable energy so...

(This article belongs to the Special Issue District Heating and Cooling Networks)
  • Article
  • Open Access
5 Citations
9,507 Views
19 Pages

Rural Cooling Needs Assessment towards Designing Community Cooling Hubs: Case Studies from Maharashtra, India

  • Kumar Biswajit Debnath,
  • Xinfang Wang,
  • Toby Peters,
  • Sanskriti Menon and ,
  • Satish Awate,
  • Gaurang Patwardhan,
  • Navneet Wadkar,
  • Mahesh Patankar and
  • Priyanka Shendage
  • + 4 authors+ 0 author

17 May 2021

In a rapidly warming world, sustainable cooling is directly related to the protection of fresh and nutritious food, medicines, and the population from extreme heat for work conditions, the economic productivity of the working population, and income g...

  • Review
  • Open Access
125 Citations
17,565 Views
14 Pages

Metamaterial-Based Radiative Cooling: Towards Energy-Free All-Day Cooling

  • Byoungsu Ko,
  • Dasol Lee,
  • Trevon Badloe and
  • Junsuk Rho

28 December 2018

In the light of the ever increasing dangers of global warming, the efforts to reduce energy consumption by radiative cooling techniques have been designed, but are inefficient under strong sunlight during the daytime. With the advent of metamaterials...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
1 Citations
2,403 Views
27 Pages

3 March 2026

Façade-integrated solar cooling technologies enable the utilisation of façade surface potential and the provision of resilient cooling. This work compares three solar cooling scenarios, positioning a solar cooling element in the west an...

(This article belongs to the Special Issue Solar Energy for Cooling and Heating: Theory, Methods and Applications)
  • Feature Paper
  • Article
  • Open Access
10 Citations
6,005 Views
30 Pages

30 November 2023

This study focused on the design of a battery pack cooling channel based on a Tesla Model S electric car. This study aimed to achieve a balance between cooling efficiency and pressure drop while maintaining safe and optimal operating temperatures for...

(This article belongs to the Section D2: Electrochem: Batteries, Fuel Cells, Capacitors)
  • Article
  • Open Access
1 Citations
2,906 Views
19 Pages

Cooling Effectiveness of the Sustainable Cooling Solution for Cattle: Case Study in Poland

  • Jagoda Błotny,
  • Anna Szczepanowska-Białek,
  • Robert Kupczyński,
  • Anna Budny-Walczak and
  • Sabina Rosiek

23 October 2024

Recently, the dairy sector has been ever more affected by global warming. This study aimed to test a novel conductive cooling system for cattle that was successfully implemented and evaluated under summer thermally challenging weather conditions in P...

(This article belongs to the Section Applied Biosciences and Bioengineering)
  • Review
  • Open Access
66 Citations
14,904 Views
28 Pages

Review of Advanced Effusive Cooling for Gas Turbine Blades

  • Wen Wang,
  • Yan Yan,
  • Yeqi Zhou and
  • Jiahuan Cui

16 November 2022

Turbine inlet temperature has continuously increased to improve gas turbine performance during the past few decades. Although internal convection cooling and traditional film cooling have contributed significantly to the current achievement, advanced...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
7 Citations
4,745 Views
19 Pages

5 June 2022

Climate change has brought a compelling need for cooling living spaces to the attention of researchers as well as construction professionals. The problem of overheating enclosures is now exacerbated in traditionally affected areas and is also affecti...

(This article belongs to the Special Issue Novel HVAC, Building Physics and Data-Centric Solutions for Energy-Efficient Smart Buildings and Sustainable Districts)
  • Review
  • Open Access
29 Citations
7,321 Views
23 Pages

18 March 2023

This article presents a review to provide up-to-date research findings on concentrated photovoltaic (CPV) cooling, explore the key challenges and opportunities, and discuss the limitations. In addition, it provides a vision of a possible future trend...

(This article belongs to the Special Issue Advanced Technologies of Solar Cells)
  • Article
  • Open Access
409 Views
14 Pages

Prototyping and Testing of M-Cycle Indirect Regenerative Evaporative Cooling System for Electronics Cooling

  • Maria Strąkowska,
  • Mariusz Felczak,
  • Dmytro Levchenko,
  • Marcin Kałuża and ,
  • Robert Olbrycht,
  • Jakub Piskozub and
  • Bogusław Więcek
  • + 2 authors+ 0 author

13 July 2026

This paper presents the design and experimental investigation of an indirect regenerative evaporative cooling (IREC) system based on the M-cycle concept for electronic systems operating in high ambient temperature. The proposed heat exchanger consist...

(This article belongs to the Special Issue Thermodynamics Analysis in Refrigeration Systems)
  • Article
  • Open Access
18 Citations
6,136 Views
15 Pages

8 February 2024

In this paper, the cooling performance of oil-cooling PMSM with hairpin winding under various oil parameters is analyzed via a simulation and an experiment. The effects of oil jet positions, oil temperatures, and oil flow rates on the cooling perform...

(This article belongs to the Section Electrical Machines and Drives)

of 408