We have previously demonstrated that cellulose nanocrystals modified with poly(ethylenimine) (PEI-f-CNC) are capable of capturing volatile organic compounds (VOCs) associated with malodors. In this manuscript, we describe our efforts to develop a sca...
A series of (MS)1+x(TiS2)2 (M = Pb, Bi, Sn) misfit layer compounds are proposed as bulk thermoelectric materials. They are composed of alternating rock-salt-type MS layers and paired trigonal anti-prismatic TiS2 layers with a van der Waals gap. This...
Counterions commonly remain with peptides in salt form after peptide purification. In animal and human studies, acetate counterions are a safer and more acceptable choice for peptides than others (e.g., trifluoroacetate counterions). Various salt for...
The application of biocatalysis and White Biotechnology tools in chemical areas concerning the production of bulk compounds and other related low-added value products (with high volumes) has been gaining importance in recent years. The expected drive...
Intensive poultry farming produces substantial volumes of chicken manure that require effective and hygienic management. This study investigated a composite inoculant formulated with four microorganisms: Kocuria rosea ACCC 10488, Bacillus ...
The introduction of the IDIC/ITIC families of non-fullerene acceptors has boosted the photovoltaic performances of bulk-heterojunction organic solar cells. The fine tuning of the photophysical, morphological and processability properties with the aim...
Due to the unique combination of physicochemical and structural properties of carbyne-enriched nanocoatings, they can be used for the development of high-end electronic devices. We propose using it for the development of sensor platforms based on sil...
Bird strike, volcanic rock, hailstones, micrometeoroids, or space debris can cause damage to aircraft and space vehicles, therefore their composite materials must have high impact resistance to maximize safety. In a 55% wt. CaCO3 compression molded s...
Bulk nanobubbles (NBs) are remarkably long-lived in liquids, yet the molecular mechanisms underpinning their stability remain unresolved. In this work, 50 ns all-atom molecular dynamics simulations were performed to investigate how gas identity (O2,...
We analyzed the influence of parameters of deep levels in the bulk and conditions on the surface on transient charge responses of semi-insulating samples (CdTe and GaAs). We studied the dependence on the applied bias step used for the experimental ev...
This review provides a summary of the existing literature on a crucial raw material for the production of isotopically pure semiconductors, which are essential for the development of second-generation quantum systems. Silicon-28-tetrafluoride (28SiF4...
The production of waste electrical and electronic equipment (WEEE) has been trending upwards in recent years due to their wide range of utilities [...]
Phase-change materials of the Ge–Sb–Te (GST) system are promising for non-volatile memory and programmable photonics owing to their reversible amorphous–crystalline transitions. Among these materials, GeSb4Te7 stands out for its opt...
The series of Mn2−xFexP1−ySiy types of compounds form one of the most promising families of magnetocaloric materials in term of performances and availability of the elemental components. Potential for large scale application needs to opti...
The present work was conducted to evaluate the volatile profile of Ecuadorian Forastero, CCN-51, ETT103 and LR14 cocoa beans during traditional fermentation in laurel wood boxes followed by a sun-drying process. Fifty-six volatiles were identified wi...
The use of vacuum impregnation with onion and beetroot juice can help with the challenge of modifying plant tissue and fits in with current trends in the development of plant-based snacks. This study aimed to determine the effect of vacuum impregnati...
Three homoleptic Hg(S2CNR2)2, for R = ethyl (1), isobutyl (2), and cyclohexyl (3), compounds apparently exhibit a steric-dependent supramolecular association in their crystals. The small group in 1 allows for dimer formation via covalent Hg–S i...
Here we report investigations of bulk and nano-sized Pr0.65Sr(0.35−x)CaxMnO3 compounds (x ≤ 0.3). Solid-state reaction was implemented for polycrystalline compounds and a modified sol–gel method was used for nanocrystalline compounds....
Here we report the synthesis and investigation of bulk and nano-sized La0.7Ba0.3−xCaxMnO3 (x = 0, 0.15, 0.2 and 0.25) compounds that are promising candidates for magnetic refrigeration applications. We compare the structural and magnetic proper...
Here, we report synthesis and investigations of bulk and nano-sized La(0.7−x)EuxBa0.3MnO3 (x ≤ 0.4) compounds. The study presents a comparison between the structural and magnetic properties of the nano- and polycrystalline manganites La(0.7&...
(Fe,Co)2(P,Si) quaternary compounds combine large uniaxial magnetocrystalline anisotropy, significant saturation magnetization and tunable Curie temperature, making them attractive for permanent magnet applications. Single crystals or conventionally...
The main flow could be unsteady in flow fields of film cooling for several reasons such as flow interactions between the rotor and the stator in the turbine. Understanding the characteristics of the film-cooling flow with an unsteady flow is importan...
Using the full-potential linearized augmented plane wave (FP-LAPW) method, dependent on density functional theory, the simple cubic ternary fluoroperovskites XZnF3 (X = Al, Cs, Ga, In) compound properties, including structural, elastic, electronic, a...
The aim of this study was to determine the emission of organic volatile compounds from maize grain as a function of granularity and packing density of bulk material in conditions imitating processes occurring in silos. The study was carried out with...
Background and objectives: Even though many industrially manufactured medicines are available, extemporaneous preparations still have their niche in dermatology. In several countries, dermatovenerologists are one of the specialists prescribing extemp...
This study was focused on the analysis of the emission of volatile compounds as an indicator of changes in the quality degradation of corn groats with 14% and 17% moisture content (wet basis) using an electronic nose (Agrinose) at changing vertical p...
A series of oxidative treatments of PdIn-supported intermetallic nanoparticles at different temperatures were performed. The bulk and surface structure of catalyst during phase transformation was investigated by bulk- and surface-sensitive techniques...
Aluminum (Al)/stainless steel (SUS) clad materials were fabricated via the process of spark plasma sintering (SPS) using Al powder/bulk and an SUS sheet. Three Al/SUS clad types were fabricated: powder/bulk (P/B), bulk/bulk (B/B), and bulk/powder/bul...
We successfully synthesized bulk Ba0.6Na0.4Fe2As2 and Sr0.5Na0.5Fe2As2 compounds by high-energy mechanical alloying (MA) technique. The MA process results in homogeneous amorphous phases of BaFe2As2 and SrFe2As2. It was found that the optimum time fo...
The hydration resistance of CaO materials prepared by Ca(OH)2 calcination with chelating compounds are investigated in this paper. The crystalline phases and microstructure characteristics of sintered specimens were studied by X-ray diffraction (XRD)...
The effects of pulsations in the main flow on film cooling from a cylindrical hole with a spanwise injection angle (orientation angle) are analyzed using numerical methods. The hole is located on a flat plate with a 35° inclined injection angle, and...
Copper–zirconium bulk alloy and Cu–Zr alloy films are prepared by vacuum smelting and magnetron sputtering, respectively, and subsequently annealing is conducted. Results show that Cu–Zr bulk alloy and alloy films exhibit significantly different micr...
An innovative approach based on the combination of analytical pyrolysis coupled with gas chromatography-mass spectrometry (Py-GC/MS) with compound-specific isotope analysis (Py-CSIA) is used to study the composting process of maize biomass. This mult...
Most lacustrine dissolved organic matter (DOM) still lacks comprehensive environmental sources and molecular characterization, especially in plateau lakes. Herein, macrophytes and algae from contrasting lakes of the Yunnan-Guizhou Plateau, together w...
The formation of specific features of forest habitats is determined by the physical, chemical, and biological properties of the soil. The aim of the study was to determine the structural and functional biodiversity of soil microorganisms inhabiting t...
Bulk B-C-N materials were synthesized under static high thermobaric conditions (20 GPa and 2,000 °C) in a multianvil apparatus from a polymer derived t-BC1.97N ceramic. The bulk samples were characterised using X-ray synchrotron radiation and analyti...
Sea buckthorn (Hippophaë rhamnoides L.) juice with inulin, maltodextrin, and inulin:maltodextrin (1:2 and 2:1) were spray-, freeze- and vacuum-dried at 50, 70 and 90 °C. The study aimed to assess the impact of drying methods and carrier agen...
The condensation polymer derived from reaction between titanocene dichloride and 2-nitro-1,4-phenylenediamine was doped by mixing the polymer with different amounts of iodine. This bulk doping of the titanocene polyamine resulted in an increase in bu...
A series of FeSe0.5Te0.5 bulk samples have been prepared using the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions for the first time and investigated for their superconducting properties using struc...
A polymeric chain spin-crossover (SCO) compound [Fe(NH2trz)3](NO3)2 was embedded in the pores of mesoporous silica MCM-41, which yielded an M@S composite. The obtained material was characterized by infrared spectrometry, powder X-ray diffractometry,...
Microencapsulation of fermented noni juice (FNJ) into powder format could protect bioactive compounds, reduce the unpleasant odour and improve the acceptability for consumers. Blends of maltodextrin (MD) and gum acacia (GA) were used to achieve spray...
Poor aqueous solubility of active compounds is a major issue in today’s drug delivery. In this study the smartFilm-technology was exploited to improve the dermal penetration efficacy of a poorly soluble active compound (curcumin). Results were compar...
Single-crystal structures of 1,1′-methylenebis(imidazolidine-2,4-dione) and its sodium and dipotassium salts were determined. Powder X-ray diffraction was also employed to characterize the bulk materials and those phases which did not yield single-cr...
The effect of Cu2+ in bulk solution on pitting corrosion resistance of extra-high-purity type 316 stainless-steel was investigated. Pitting occurred in 0.1 M NaCl-1 mM CuCl2, whereas pitting was not initiated in 0.1 M NaCl. Although deposition of Cu2...
The crystal structures, stability, mechanical properties and electronic structures of Nb-free and Nb-doped Ti-Al intermetallic compounds were investigated via first-principles calculations. Seven components and eleven crystal configurations were cons...
Environmental contaminations can sometimes be difficult to measure, particularly in complex matrices such as seawater. This is the case of organotin compounds (OSn) such as the monobutyltin (MBT), dibutyltin (DBT), and tributyltin (TBT), whose range...
In this research, Ti-Al powders were produced by electrical explosion of twisted titanium and aluminum wires. The resulting powders were pressed and sintered in a vacuum to obtain bulk composites. Transmission electron microscopy (TEM), energy disper...
Concerns arising from accidental and occasional releases of novel industrial nanomaterials to the environment and waterbodies are rapidly increasing as the production and utilization levels of nanomaterials increase every day. In particular, two-dime...
Environmental legislation has focused its attention on improving air quality. In this context, the presence of sulfur compounds in fuels, such as diesel and gasoline, is undesirable. When sulfur is combusted, compounds are emitted as SOx (SO2 and SO3...
N-alkyl phosphoranimines were synthesized via the Staudinger reaction of four different alkyl azides with tris(2,2,2-trifluoroethyl) phosphite. N-adamantyl, N-benzyl, N-t-butyl, and N-trityl phosphoranimines were thoroughly characterized and evaluate...
of 19