Skip to Content

59,711 Results Found

  • Article
  • Open Access
12 Citations
6,445 Views
19 Pages

8 January 2020

The effect of temperature on three-dimensional (3D) structured light scanners is a very complex issue that, under some conditions, can lead to significant deterioration of performed measurements. In this paper, we present the results of several studi...

(This article belongs to the Section Electronic Sensors)
  • Article
  • Open Access
1,420 Views
21 Pages

22 January 2026

The temperature at the base of the ear is highly correlated with the core body temperature of sheep and responds sensitively to febrile conditions, making it a valuable indicator of sheep health. In northern China, the closed housing environment duri...

(This article belongs to the Section Animal System and Management)
  • Article
  • Open Access
812 Views
19 Pages

A Method for Reducing the Temperature Sensitivity of a Single-Base Propellant by Adding Ultra-Fine RDX Particles

  • Sihan Zhu,
  • Yingbo Wang,
  • Qixuan Ying,
  • Zongcheng Jiang and ,
  • Ruifan Zhao,
  • Yinan Yang,
  • Tong Sun,
  • Yeqin Weng,
  • Bin Xu and
  • Weidong He
  • + 5 authors+ 0 author

8 May 2026

The temperature sensitivity coefficient greatly affects the interior ballistic performance of propellant charges. Even under consistent loading conditions, variations in environmental temperature can lead to maximum chamber pressure fluctuations of 4...

(This article belongs to the Special Issue Advanced Polymeric Materials for Defence Applications)
  • Article
  • Open Access
7 Citations
3,664 Views
16 Pages

15 November 2022

The aim of this study was to determine the influence of caffeic and caftaric acid, fructose, and storage temperature on the formation of furan-derived compounds during storage of base wines. Base wines produced from Chardonnay grapes were stored at 1...

(This article belongs to the Collection Wine Chemistry)
  • Article
  • Open Access
6 Citations
3,503 Views
8 Pages

Large-Scale Synthesis of Carbon Dots Driven by Schiff Base Reaction at Room Temperature

  • Jifen Shi,
  • Shuai Chang,
  • Yating Gao,
  • Jian Lv and ,
  • Ruocan Qian,
  • Binbin Chen and
  • Dawei Li
  • + 2 authors+ 0 author

27 November 2024

Photoluminescent carbon dots (CDs) have received increasing attention because of their admirable photophysical performances. The current strategies for synthesizing CDs typically require high energy consumption levels, and the ability to synthesize C...

(This article belongs to the Special Issue Synthesis and Application of Luminescent Materials, 2nd Edition)
  • Article
  • Open Access
1 Citations
791 Views
15 Pages

Designing a Cr3+-Based Transition Metal Catalyst: Redox-Mediated Low-Temperature Activation for Strong Solid Base Generation

  • Tiantian Li,
  • Xiaowen Li,
  • Hao Wu,
  • Qunyu Chen and ,
  • Hao Zhou,
  • Xiaochen Lin and
  • Dingming Xue
  • + 2 authors+ 0 author

Solid base catalysts hold significant promise for replacing traditional homogeneous bases with green chemical processes. However, the construction of their strong basic sites typically relies on high-temperature calcination, which often leads to the...

(This article belongs to the Special Issue Transition Metal Catalysts: Design, Synthesis and Applications)
  • Article
  • Open Access
16 Citations
2,746 Views
21 Pages

The adsorption of polymers on solid surfaces is common in many industrial applications, such as coatings, paints, catalysis, colloids, and adhesion processes. The properties of absorbed polymers commonly vary with temperature. In this paper, inverse...

(This article belongs to the Special Issue Chromatography and Extraction Techniques for Chemical Applications)
  • Article
  • Open Access
2 Citations
1,415 Views
17 Pages

High-Temperature X-Ray Crystal Structure Analysis of Schiff Base Cu(II) and Ni(II) Complexes and Data Statistics

  • Anna Okui,
  • Rin Tsuchiya,
  • Daisuke Nakane,
  • Takashiro Akitsu and
  • Toby J. Blundell

13 March 2025

In this study, single crystals of previously reported Schiff base copper (II) (Cu) and nickel (II) (Ni) complexes were synthesized; a structural analysis was performed using data measured at high temperatures, 298 K and 410 K; and CIF and electron de...

(This article belongs to the Special Issue Inorganic Chemistry in Asia)
  • Communication
  • Open Access
1,565 Views
12 Pages

Prediction of Nocturnal Foaling Using Ventral Tail Base Surface Temperature Recorded by a Wearable Device Attached to the Mare’s Tail

  • Takahiro Aoki,
  • Guilherme Violin,
  • Tsumugi Jikihara,
  • Makoto Shibata and ,
  • Shogo Higaki,
  • Tomomi Ozawa,
  • Eri Furukawa and
  • Koji Yoshioka
  • + 3 authors+ 0 author

9 January 2026

It is known that a mare’s body temperature drops before parturition, but no research has yet applied this thermal change to the prediction of foaling. In this study, the ventral tail base surface temperature (VTB-ST) was recorded by a tail-atta...

(This article belongs to the Section Animal Reproduction)
  • Article
  • Open Access
2 Citations
1,010 Views
17 Pages

Elucidating the Impact of High-Temperature Daqu on Base Baijiu of Sauce-Flavor Baijiu: From Key Aroma Compounds to Microbial Origins

  • Peng Chen,
  • Shiming Shen,
  • Liangcai Lin,
  • Qijing Liu and ,
  • Cuiying Zhang and
  • Cheng Zhong
  • + 1 author+ 0 author

24 March 2026

Jiaomian base baijiu is an important seasoning liquor used in the blending of sauce-flavor baijiu, yet the mechanism underlying its flavor formation remains insufficiently understood. Moreover, the specific contribution of high-temperature Daqu (HTDQ...

(This article belongs to the Special Issue Brewing Microorganisms in Fermented Foods: Physiological Characteristics, Succession Patterns and Metabolic Functions)
  • Feature Paper
  • Article
  • Open Access
7 Citations
3,141 Views
21 Pages

29 April 2021

Two different material batches made of random and textured orientated polycrystalline nickel-base superalloy René80 were investigated under isothermal low cycle fatigue tests at 850 °C for a notched specimen geometry. In contrast to a smooth specimen...

(This article belongs to the Special Issue High-Temperature Behavior of Metals)
  • Article
  • Open Access
1 Citations
1,567 Views
23 Pages

2 January 2025

The statistical retrieval of atmospheric parameters will be greatly affected by the accuracy of the simulated brightness temperatures (BTs) derived from the radiative transfer model. However, it is challenging to further improve a physical-based radi...

(This article belongs to the Section Atmospheric Techniques, Instruments, and Modeling)
  • Article
  • Open Access
11 Citations
2,743 Views
15 Pages

Extrusion-based 3D printing for thermoplastic polymers manifests potential for the fabrication of biocompatible and biodegradable scaffolds. However, the uncontrollable shape of printed filaments usually negatively impacts on the printing processes....

(This article belongs to the Section Pharmaceutical Technology, Manufacturing and Devices)
  • Article
  • Open Access
11 Citations
4,311 Views
14 Pages

26 September 2019

A heatsink is a large experimental device which is used to simulate the outer space environment. In this paper, a Raman-based distributed temperature sensor was used for real-time and continuous heatsink temperature monitoring, and a special Raman-ba...

(This article belongs to the Special Issue Distributed Optical Fiber Sensing)
  • Article
  • Open Access
2 Citations
3,250 Views
16 Pages

Dual-Action Calcium Monoaluminate Enabled Room-Temperature Curing of Inorganic Phosphate-Based High-Temperature Adhesive

  • Zhuo Dong,
  • Lei Zhang,
  • Ke Yang,
  • Zhenggang Fang and ,
  • Yaru Ni,
  • Yang Li and
  • Chunhua Lu
  • + 2 authors+ 0 author

15 September 2024

High-temperature adhesives find extensive application in diverse domains, encompassing repairs, production processes, and material joining. However, achieving their curing at ambient temperatures remains a formidable challenge due to the inherent req...

(This article belongs to the Special Issue Fabrication, Characterization, and Application of High-Temperature Materials and Coatings)
  • Article
  • Open Access
7 Citations
5,460 Views
12 Pages

Slow Mode-Based Control Method for Multi-Point Temperature Control System

  • Song Xu,
  • Seiji Hashimoto,
  • Wei Jiang,
  • Yuqi Jiang and ,
  • Katsutoshi Izaki,
  • Takeshi Kihara and
  • Ryota Ikeda
  • + 2 authors+ 0 author

14 August 2019

In recent years, thermal processing systems with integrated temperature control have been increasingly needed to achieve high quality and high performance. In this paper, responding to the growing demands for proper transient response and to provide...

(This article belongs to the Special Issue Advances in Condition Monitoring, Optimization and Control for Complex Industrial Processes)
  • Article
  • Open Access
266 Views
22 Pages

Temperature and Moisture in Pavements and Soil Bases in the Southern Metropolises of Kazakhstan

  • Bagdat Teltayev,
  • Giuseppe Loprencipe,
  • Umir Kalybayev,
  • Aizhan Muta and ,
  • Yerbol Aitbayev and
  • Azamat Zhaisanbayev
  • + 1 author+ 0 author

28 August 2026

In this paper an experimental study and comparative analysis of temperature and moisture in pavements and their soil bases on experimental road sections located in two southern metropolises of Kazakhstan—in the cities of Almaty and Shymkent&mda...

  • Article
  • Open Access
11 Citations
4,021 Views
11 Pages

26 January 2021

The thermal requirements of Meloidogyne incognita on Phaseolus vulgaris in a set of constant soil temperatures were determined and the phenology model was validated at fluctuating soil temperatures. The base temperature (Tb) and the thermal constant...

(This article belongs to the Collection Feature Papers in Plant Protection)
  • Article
  • Open Access
3 Citations
2,862 Views
20 Pages

Active Disturbance Rejection Control (ADRC) of Hot-Compression Molding Temperature of Bamboo-Based Fiber Composites

  • Yucheng Ding,
  • Shaolin Tan,
  • Zhihao Liu,
  • Tongbin Liu and ,
  • Yaqiang Ma,
  • Fanwei Meng,
  • Jiawei Zhang and
  • Chunmei Yang
  • + 3 authors+ 0 author

12 July 2024

Due to their outstanding properties, bamboo-based fiber composites are gaining significant traction in the fields of construction and decoration. Among the crucial process steps in their production, hot pressing stands out as a pivotal one. Temperatu...

(This article belongs to the Topic Advances in Sustainable Materials and Products)
  • Article
  • Open Access
423 Views
20 Pages

Effect of Cobalt-Based Filler Wire Composition on the Microstructure and High-Temperature Properties of Cladding Layers on Ni-Based Superalloy

  • Shuai Huang,
  • Tianyuan Wang,
  • Wei Liu,
  • Yu Wu and ,
  • Jian Miao,
  • Guohui Zhang,
  • Bingqing Chen and
  • Biao Zhou
  • + 3 authors+ 0 author

17 July 2026

To improve the high-temperature service performance of cladding layers on DD5 single crystal superalloy, this study comparatively investigated the effects of two cobalt-based filler wires, PMet931 and PMet994, on the microstructural evolution, hardne...

(This article belongs to the Special Issue Additive Manufacturing and Forming Technologies of Alloy: Mechanical Properties and Microstructure Evaluation (Second Edition))
  • Article
  • Open Access
30 Citations
4,558 Views
21 Pages

21 April 2020

To study the variations in modal properties of a reinforced concrete (RC) slab (such as natural frequencies, mode shapes and damping ratios) under the influence of ambient temperature, a laboratory RC slab is monitored for over a year, the simple lin...

(This article belongs to the Special Issue Vibration-Based Structural Health Monitoring)
  • Article
  • Open Access
993 Views
26 Pages

Developing a Torque-Based Criterion for Estimating Mixing and Compaction Temperatures of Asphalt Mixtures

  • Hawraa F. Jabbar,
  • Miami M. Hilal,
  • Mohammed Y. Fattah,
  • Karim Sherif Mostafa and ,
  • Norbaya Sidek and
  • Mohamed A. Hafez
  • + 1 author+ 0 author

Accurate determination of mixing and compaction temperatures is essential for producing durable asphalt pavements while minimizing energy consumption and binder aging. Conventional temperature selection is based on asphalt binder viscosity, which doe...

  • Article
  • Open Access
12 Citations
3,418 Views
19 Pages

21 May 2020

The conventional temperature drift error (TDE) compensation model cannot decouple temperature dependence of Si-based materials because temperature correlated quantities (TCQ) have not been obtained comprehensively, and Micro-Electro-Mechanical System...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
6 Citations
2,342 Views
17 Pages

Mechanisms of Low Temperature Thickening of Different Materials for Deepwater Water-Based Drilling Fluids

  • Zhongyi Wang,
  • Jinsheng Sun,
  • Kaihe Lv,
  • Xianbin Huang and ,
  • Zhenhang Yuan and
  • Yang Zhang
  • + 1 author+ 0 author

2 December 2024

During deepwater drilling, the low mudline temperatures and narrow safe density window pose serious challenges to the safe and efficient performance of deepwater water-based drilling fluids. Low temperatures can lead to physical and chemical changes...

(This article belongs to the Special Issue Gels in the Oil Field)
  • Article
  • Open Access
435 Views
26 Pages

Temperature-Based Design Method for Concrete Cone Failure Under Fire Conditions

  • Nicolas Pinoteau,
  • Kresimir Nincevic,
  • Kenton McBride,
  • Killian Regnier and ,
  • Antoine Labbé and
  • Roberto Piccinin
  • + 1 author+ 0 author

16 July 2026

This paper introduces a temperature-based design method for determining the tensile concrete cone capacity of anchors subjected to fire exposure. Current prescriptive approaches, most notably Eurocode 2, rely solely on embedment depth and fire durati...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
30 Citations
4,539 Views
14 Pages

20 October 2022

The environment-friendly water-based drilling fluid system developed for the petroleum development industry cannot successfully withstand temperatures up to 180 °C, and most high temperature-resistant additives with sulfonic acid groups that have...

(This article belongs to the Special Issue Development and Applications of Polymer-Based Oilfield Chemicals)
  • Review
  • Open Access
19 Citations
5,490 Views
35 Pages

Iron-Based High-Temperature Alloys: Alloying Strategies and New Opportunities

  • Yingjie Qiao,
  • Yanzhao Ni,
  • Kun Yang,
  • Peng Wang and ,
  • Xiaodong Wang,
  • Ruiliang Liu,
  • Bin Sun and
  • Chengying Bai
  • + 3 authors+ 0 author

24 June 2025

Iron-based high-temperature alloys are engineered to withstand extreme conditions, including elevated temperatures, mechanical stress, and corrosive environments. These alloys play a critical role in industries such as aerospace, power generation, an...

(This article belongs to the Section Metals and Alloys)
  • Review
  • Open Access
41 Citations
5,342 Views
16 Pages

24 April 2023

Nickel-based coatings obtained by laser melting are broadly applied for surface modification owing to their high bond strength and exceptional wear resistance. Nickel-based laser cladding coatings are also extensively employed in high temperature wea...

(This article belongs to the Special Issue Surface Engineering and Coating Tribology)
  • Article
  • Open Access
1 Citations
2,200 Views
21 Pages

14 June 2022

Sea surface barometric pressure contributes to calculating the surface transmissivity so that the observations of Microwave Temperature Sounder-II channels with non-zero surface transmissivity contain the sea surface barometric pressure information....

  • Article
  • Open Access
5 Citations
2,922 Views
13 Pages

8 November 2022

In some instances, traditional mineral admixtures, such as fly ash and slag, have been insufficient, and tuff powder (TP) has been used as an alternate replacement. However, the mechanisms of the hydration of tuff powder have rarely been studied, whi...

  • Article
  • Open Access
421 Views
18 Pages

Temperature and Frequency Dependence of NMR Relaxation Properties of Oil-Based Mud Filtrate

  • Jun Cai,
  • Yu Xia,
  • Wenliang Hu,
  • Guodong Zhang and ,
  • Yubing Liu and
  • Gong Zhang
  • + 1 author+ 0 author

Oil-based mud filtrate (OBMF) invasion significantly alters the petrophysical response of nuclear magnetic resonance (NMR) logging, severely compromising the accuracy of reservoir fluid identification and petrophysical evaluation. However, the NMR re...

(This article belongs to the Special Issue Nuclear Magnetic Resonance (NMR) in the Petroleum Industry and Porous Media)
  • Article
  • Open Access
5 Citations
2,954 Views
15 Pages

18 March 2025

Currently, research has confirmed the significant potential of 3D printed polymer lattices in enhancing the mechanical properties of cement-based composites. Polymer materials are influenced by high-temperature environments. This study aims to furthe...

(This article belongs to the Special Issue Advanced Experimental Mechanics in Polymer Composites Testing)
  • Article
  • Open Access
30 Citations
5,161 Views
17 Pages

9 August 2023

This paper proposes an Informer-based temperature prediction model to leverage data from an automatic weather station (AWS) and a local data assimilation and prediction system (LDAPS), where the Informer as a variant of a Transformer was developed to...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
3 Citations
2,304 Views
15 Pages

Effects of Cr and Al Contents on the Oxide Structures of Ni-Based Superalloys at High Temperatures

  • Kwangsoo Choi,
  • Byunghak Choe,
  • Sunghee Han,
  • Daehyun Kim and ,
  • Seong-Moon Seo and
  • Dae Won Yun
  • + 1 author+ 0 author

29 March 2025

In this study, the morphology of high-temperature surface oxides in Ni-based superalloys was investigated as a function of Cr and Al content. First, the oxide layer morphologies of various alloys published in the literature were classified according...

  • Article
  • Open Access
19 Citations
11,315 Views
31 Pages

Temperature Measurement—Inquiry-Based Learning Activities for Third Graders

  • Žaneta Gerhátová,
  • Peter Perichta,
  • Marián Drienovský and
  • Marián Palcut

5 September 2021

The article presents our Inquiry-Based Learning (IBL) activities in the project-based Science education of third graders (8–9-year-old pupils) in the Slovak Republic. Individual tasks of project assignment titled “Temperature Measurement” were concei...

(This article belongs to the Special Issue Early Childhood Science Education: Research Trends in Learning and Teaching)
  • Article
  • Open Access
8 Citations
3,311 Views
15 Pages

High Temperature Behaviors of a Casting Nickel-Based Superalloy Used for 815 °C

  • Jiangping Yu,
  • Donghong Wang,
  • Jingyang Chen,
  • Changlin Yang and ,
  • Xin Hao,
  • Jianxin Zhou,
  • Dayong Li,
  • Da Shu,
  • Chengbo Xiao and
  • Yinghong Peng
  • + 5 authors+ 0 author

4 February 2021

The hot deformation behaviors of the SJTU-1 alloy, the high-throughput scanned casting Nickel-based superalloy, was investigated by compression test in the temperature range of 900 to 1200 °C and strain rate range of 0.1–0.001 s−1. The hot processing...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
4 Citations
2,361 Views
17 Pages

18 May 2023

Nb-Si based ultrahigh-temperature alloys with the composition of Nb-22Ti-15Si-5Cr-3Al (atomic percentage, at. %) were prepared by hot press sintering (HPS) at 1250, 1350, 1400, 1450 and 1500 °C. The effects of HPS temperatures on the microstructu...

(This article belongs to the Special Issue Heat Treatments and Performance of Alloy and Metal)
  • Article
  • Open Access
4 Citations
2,020 Views
26 Pages

Impact of Data Corruption and Operating Temperature on Performance of Model-Based SoC Estimation

  • King Hang Wu,
  • Mehdi Seyedmahmoudian,
  • Saad Mekhilef,
  • Prashant Shrivastava and
  • Alex Stojcevski

25 September 2024

Electric vehicles (EVs) are becoming popular around the world. Making a lithium battery (LIB) pack with a robust battery management system (BMS) for an EV to operate under different complex environments is both a challenge and a requirement for engin...

(This article belongs to the Section D2: Electrochem: Batteries, Fuel Cells, Capacitors)
  • Article
  • Open Access
9 Citations
2,447 Views
16 Pages

17 October 2022

Low-temperature crack resistance is the core issue affecting the promotion of rejuvenated asphalt, but most current studies do not consider the creep relaxation characteristics of rejuvenated asphalt mixture at low temperatures, which is inconsistent...

(This article belongs to the Section Construction and Building Materials)
  • Review
  • Open Access
1,088 Views
10 Pages

Electrochemical Intercalation: An Effective Approach for Chemical Modification of FeSe-Based High-Temperature Superconductors

  • Hua Zhang,
  • Jihu Lu,
  • Feng Wu,
  • Yunzhenshan Gao and ,
  • Yuhang Zhang,
  • Ziyi Liu and
  • Xiaoli Dong
  • + 2 authors+ 0 author

4 May 2026

FeSe-based superconductors have become a hot topic with regard to high-temperature superconductor mechanisms and applications due to their broadly adjustable critical temperatures and the underlying rich physics. This has led to the emergence of nume...

(This article belongs to the Special Issue Low Temperature Physics, Pioneer of Chinese Low Temperature Physics and Cryogenics—In Memory of Prof. Dr. Chaosheng Hong (C.S. Hung))
  • Feature Paper
  • Article
  • Open Access
11 Citations
4,379 Views
11 Pages

Temperature Effects on the Deformation Mechanisms in a Ni-Co-Based Superalloys

  • Rui Hu,
  • Jiaheng Zhao,
  • Cheng Yang,
  • Jinhui Du and ,
  • Xian Luo,
  • Zhongnan Bi and
  • Bin Gan
  • + 2 authors+ 0 author

5 October 2022

The tensile properties of a Ni-Co-based superalloy were investigated from room temperature to 900 °C. From 25 to 650 °C, the yield strength and tensile strength of the alloy decreased slightly, while the elongation decreased sharply. From 760...

(This article belongs to the Special Issue Experiments and Simulations of Superalloys)
  • Review
  • Open Access
121 Citations
10,722 Views
29 Pages

7 January 2018

Selective catalytic reduction (SCR) with NH3 is the most efficient and economic flue gas denitrification technology developed to date. Due to its high low-temperature catalytic activity, Mn-based catalysts present a great prospect for application in...

(This article belongs to the Special Issue Selective Catalytic Reduction of NOx)
  • Article
  • Open Access
16 Citations
3,632 Views
19 Pages

An Amphiphilic Multiblock Polymer as a High-Temperature Gelling Agent for Oil-Based Drilling Fluids and Its Mechanism of Action

  • Yinbo He,
  • Mingliang Du,
  • Jing He,
  • Haiyang Liu and ,
  • Yanhua Lv,
  • Lei Guo,
  • Peng Zhang and
  • Yunhai Bai
  • + 3 authors+ 0 author

9 December 2023

Oil-based drilling fluids are widely used in challenging wells such as those with large displacements, deepwater and ultra-deepwater wells, deep wells, and ultra-deep wells due to their excellent temperature resistance, inhibition properties, and lub...

(This article belongs to the Special Issue Gel for Oil-Based Drilling Fluid)
  • Article
  • Open Access
748 Views
22 Pages

Design and Performance Assessment of a Polymer-Based Filtration-Control System for High-Temperature, High-Density Water-Based Drilling Fluids

  • Juan Miao,
  • Lijun Li,
  • Manxi Leng,
  • Hongyu Zhang and ,
  • Huaiyu Sun and
  • Bing Huang
  • + 1 author+ 0 author

22 April 2026

A sustainable polymer-based filtration control system was developed for high-temperature, high-density water-based drilling fluids. The system’s rheological stability, filtration performance, and filter cake properties were evaluated under vary...

(This article belongs to the Topic Petroleum and Gas Engineering, 2nd edition)
  • Review
  • Open Access
18 Citations
3,869 Views
27 Pages

Sulfur and Water Resistance of Carbon-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NOx: A Review

  • Zhenghua Shen,
  • Shan Ren,
  • Baoting Zhang,
  • Weixin Bian and ,
  • Xiangdong Xing and
  • Zhaoying Zheng
  • + 1 author+ 0 author

13 November 2023

Low-temperature NH3-SCR is an efficient technology for NOx removal from flue gas. The carbon-based catalyst designed by using porous carbon material with great specific surface area and interconnected pores as the support to load the active component...

(This article belongs to the Special Issue Nanotechnology in Catalysis, 2nd Edition)
  • Article
  • Open Access
21 Citations
5,454 Views
21 Pages

A Temperature-Sensitive Polymeric Rheology Modifier Used in Water-Based Drilling Fluid for Deepwater Drilling

  • Zhongyi Wang,
  • Jinsheng Sun,
  • Kun Zhang,
  • Kaihe Lv and ,
  • Xianbin Huang,
  • Jintang Wang,
  • Ren Wang and
  • Xu Meng
  • + 3 authors+ 0 author

30 May 2022

Rheology modifiers are essential for the flat rheology of water-based drilling fluids in deepwater. The low temperature thickening of deepwater water-based drilling fluids results in dramatic rheological changes in the 20–30 °C range. To ad...

(This article belongs to the Special Issue Gels for Oil Drilling and Enhanced Recovery)
  • Article
  • Open Access
3 Citations
955 Views
18 Pages

A Novel Thermo-Thickening Oil-Based Drilling Fluid Based on Composite Thickener Under High Temperature and Pressure

  • Weijie Chen,
  • Xiaoming Tang,
  • Leilei Wang,
  • Hong Ma and ,
  • Anliang Chen,
  • Jian Zhang,
  • Weian Huang,
  • Guanzheng Zhuang,
  • Hanyi Zhong and
  • Xianbin Zhang
  • + 5 authors+ 0 author

18 December 2025

Under high-temperature conditions in deep well formations, oil-based drilling fluids tend to show degraded rheological properties and reduced suspension capacity, which may impair wellbore cleanliness and circulation pump pressure and hinder drilling...

(This article belongs to the Section H: Geo-Energy)
  • Article
  • Open Access
1 Citations
3,723 Views
18 Pages

27 June 2022

In the heating supply systems in apartment buildings utilizing district heating, the supply water temperature setting is a critical control for providing sufficient heating and effective usage of the heating energy. Conventional water temperature con...

(This article belongs to the Special Issue Research and Practice of Sustainable Construction Project Management)
  • Article
  • Open Access
15 Citations
3,267 Views
21 Pages

Effect of Yttrium Additions on the High-Temperature Oxidation Behavior of GH4169 Ni-Based Superalloy

  • Tiantian Wang,
  • Wei Liu,
  • Shufeng Yang,
  • Jingshe Li and ,
  • Peng Zhao and
  • Hui Xue
  • + 1 author+ 0 author

4 June 2024

The effect of the active element yttrium and its content on the oxidation behavior of GH4169 Ni-based superalloy at extreme temperature was studied by isothermal oxidation experiments. The results show that the oxide scale of GH4169 alloy presents a...

(This article belongs to the Special Issue Metallurgical Process Simulation and Optimization—2nd Volume)
  • Review
  • Open Access
76 Citations
6,176 Views
22 Pages

A Review on the Wear, Corrosion and High-Temperature Resistant Properties of Wire Arc-Sprayed Fe-Based Coatings

  • Joseph Ndiithi Ndumia,
  • Min Kang,
  • Bertrand Vigninou Gbenontin,
  • Jinran Lin and
  • Samuel Mbugua Nyambura

27 September 2021

Among different thermal spraying methods, arc-spraying has been widely used due to its low operating costs and high deposition efficiency. The rapid progress of cored wire technology in arc-spraying has increased possibilities for the preparation of...

(This article belongs to the Special Issue Multi-Functional Materials and Applications and Selected Papers from ICMMA2021)

of 1,195