Skip to Content
You are currently on the new version of our website. Access the old version .

1,120 Results Found

  • Article
  • Open Access
4 Citations
2,976 Views
15 Pages

30 June 2021

In this study, detailed finite element analysis was conducted to examine the seismic performance of square and circular hollow steel braces under axial cyclic loading. Finite element models of braces were constructed using ABAQUS finite element analy...

(This article belongs to the Special Issue Dynamics of Building Structures)
  • Article
  • Open Access
2 Citations
1,948 Views
21 Pages

4 December 2024

The individual effects of the main reinforcement corrosion and stirrup corrosion on the axial compressive behavior of reinforced concrete (RC) columns were evaluated through axial compression tests on 10 full-scale short columns. The primary experime...

(This article belongs to the Special Issue Seismic Analysis and Design of Building Structures)
  • Article
  • Open Access
10 Citations
3,334 Views
21 Pages

31 August 2023

A thin-walled steel cylindrical shell is a common engineering structure that has an efficient load-carrying capacity. This structure is more easily subjected to partial axial compression loads in application, and buckling is the main failure mode. Ho...

  • Article
  • Open Access
3 Citations
1,362 Views
16 Pages

Axial Compression Behavior of Bamboo Scrimber-Filled Steel Tubular (BSFST) Column Under Different Loading Modes

  • Ze Xing,
  • Yang Wei,
  • Kang Zhao,
  • Jinwei Lu and ,
  • Baoxing Wei and
  • Yu Lin
  • + 1 author+ 0 author

31 July 2025

Bamboo scrimber is an environmentally friendly biomass building material with excellent mechanical properties. However, it is susceptible to delamination failure of the transverse fibers under compression, which limits its structural performance. To...

(This article belongs to the Special Issue Modeling and Analysis of Composite Materials and Structures in Civil Engineering (Second Edition))
  • Article
  • Open Access
16 Citations
6,118 Views
19 Pages

Ultimate Load-Carrying Ability of Rib-Stiffened 2024-T3 and 7075-T6 Aluminium Alloy Panels under Axial Compression

  • Ján Slota,
  • Andrzej Kubit,
  • Tomasz Trzepieciński,
  • Bogdan Krasowski and
  • Ján Varga

2 March 2021

Stringer-stiffened panels made of aluminium alloys are often used as structural elements in the aircraft industry. The load-carrying capacity of this type of structure cannot relieve the reduction in strength in the event of local buckling. In this p...

(This article belongs to the Special Issue Technologies for Joining and Forming Thin-Walled Structures in the Construction of Transportation Vehicles)
  • Article
  • Open Access
30 Citations
8,390 Views
18 Pages

14 October 2015

The behavior of concrete-filled fiber tubes (CFFT) polymers under axial compressive loading was investigated. Unlike the traditional fiber reinforced polymers (FRP) such as carbon, glass, aramid, etc., the FRP tubes in this study were designed using...

(This article belongs to the Special Issue Fiber Reinforced Polymers (FRP) for Infrastructure Applications)
  • Article
  • Open Access
850 Views
16 Pages

Compressive Mechanical Behavior of Seawater Coral Concrete Subjected to Axial and Biaxial Loading

  • Yumei Wang,
  • Jiasheng Jiang,
  • Chunyue Qin,
  • Di Wu and ,
  • Zhiheng Deng and
  • Yanxi Yang
  • + 1 author+ 0 author

With the advancement of marine engineering, coral concrete—comprising coral coarse aggregate, coral sand, and seawater—has garnered increasing research interest. To further investigate its compressive mechanical behavior under axial and l...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
14 Citations
2,599 Views
16 Pages

13 July 2020

Acoustic Emission (AE) nondestructive tests have attracted great interest for their use in the determination of structural properties and behavior of reinforced concrete (RC) elements. One of the applications this method can contribute to is in high-...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
9 Citations
2,634 Views
27 Pages

Nonlinear Analyses of Porous Functionally Graded Sandwich Piezoelectric Nano-Energy Harvesters under Compressive Axial Loading

  • Shan Zeng,
  • Zhangtao Peng,
  • Kaifa Wang,
  • Baolin Wang and ,
  • Jinwu Wu and
  • Tianxi Luo
  • + 1 author+ 0 author

11 December 2021

In this study, a sandwich piezoelectric nano-energy harvester model under compressive axial loading with a core layer fabricated of functionally graded (FG) porous material is presented based on the nonlocal strain gradient theory (NSGT). The von Kar...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
11 Citations
4,007 Views
19 Pages

Evaluation of Hybrid Fiber Multiscale Polymer Composites for Structural Confinement under Cyclic Axial Compressive Loading

  • Lakshmi Joseph,
  • Mini K. Madhavan,
  • Karingamanna Jayanarayanan and
  • Alessandro Pegoretti

Fiber reinforced polymer (FRP) confinement is recognized as the most promising technique for the strengthening and retrofitting of concrete structures. In order to enhance the performance of conventional epoxy-based FRP composites, nano filler modifi...

(This article belongs to the Section Polymer Composites)
  • Article
  • Open Access
498 Views
28 Pages

25 March 2026

Longitudinal shuttle-shaped concrete-filled steel column with cruciform sections (LSS-CFST-CS) is highly valued by architects and structural engineers for its distinctive appearance and significant architectural impact in spatial steel structures. Ho...

(This article belongs to the Special Issue Large-Span, Tall and Special Steel and Composite Structures)
  • Article
  • Open Access
501 Views
12 Pages

Study on the Influence of Sustained Axial Compression and Tension on the Permeability Properties of Panel Concrete

  • Xin Zhang,
  • Hongxing Zhong,
  • Lei Gao,
  • Jiahui Li and ,
  • Yanjing Cai and
  • Bobo Xiong
  • + 1 author+ 0 author

The anti-seepage performance of concrete directly affects the anti-seepage effect and durability of the concrete face slab of the rockfill dam. Since the panel concrete is often in a complex stress state in practical engineering, its permeability coe...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
435 Views
39 Pages

9 July 2026

Bimodular materials refer to materials that exhibit distinct elastic properties under tensile and compressive loading conditions. This study aims to analyze the buckling problem of bimodular thin cylindrical shells under axial compressive loading. In...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
3 Citations
2,862 Views
18 Pages

29 June 2023

The connection method of lengthening the steel tube of hollow concrete-filled sandwich circular steel tubes and threaded connections is proposed. The length, depth and position are the basic parameters. Twelve hollow concrete sandwich circular steel...

(This article belongs to the Special Issue Welding and Joining of Advanced High-Strength Steels)
  • Article
  • Open Access
12 Citations
3,349 Views
20 Pages

21 December 2023

Thin-walled galvanized helical corrugated steel tubes (HCSTs) filled with concrete are promising composite members, consisting of concrete, an anti-corrosion shell, and a multifunctional exterior corrugated steel tube. To investigate the synergistic...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
5 Citations
2,813 Views
34 Pages

This study addresses a critical gap in blast-resistant design by investigating the influence of axial compression ratio—a previously underexplored parameter—on the dynamic response of reinforced concrete (RC) shear walls under close-in ex...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
1 Citations
709 Views
25 Pages

16 March 2026

Conventional reinforced concrete exhibits weaknesses such as poor ductility, limited load-bearing capacity, and complex reinforcement detailing in beam-column joints. To expand its application scope, this study proposes two novel types of L-shaped an...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
10 Citations
3,195 Views
22 Pages

24 March 2021

In this paper, the stability of large-size graded crushed stone used for road base or cushioning under repeated load is investigated. Using an in-house developed device, large-size crushed stone mix was compacted and molded by the vibration and rotar...

(This article belongs to the Special Issue Experimental Testing and Constitutive Modelling of Pavement Materials)
  • Article
  • Open Access
499 Views
26 Pages

14 July 2026

To evaluate the durability of desert sand concrete (DSC) in a semi-buried saline-alkali soil environment, this study examined DSC with a 30% desert sand replacement rate, using ordinary concrete (OC) as a control. A 180-day mixed salt attack test was...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
3 Citations
2,988 Views
16 Pages

7 February 2023

The axial compression behaviour of fibre-reinforced polymer (FRP)-confined concrete-core-encased rebar (FCCC-R) was investigated by performing monotonic axial compression tests on seven groups of FCCC-R specimens and three groups of pure rebar specim...

(This article belongs to the Special Issue Fiber-Reinforced Polymer Composites for Building and Bridge Applications)
  • Article
  • Open Access
11 Citations
5,480 Views
24 Pages

Cyclic Behavior of FRP Strengthened Beam-Column Joints under Various Concrete Damage Levels

  • Rajai Al-Rousan,
  • Osama Nusier,
  • Khairedin Abdalla,
  • Mohammad Alhassan and ,
  • Emmanouil A. Vougioukas,
  • Athanassios A. Stamos and
  • Nikos D. Lagaros
  • + 2 authors+ 0 author

This paper is intended to examine the efficiency of utilizing the FRP composite material with an externally bonded technique in enhancing the behavior of the damaged B-C joints and controlling their failure mode using the NLFEA approach. At first, th...

(This article belongs to the Special Issue Advances in Concrete Binders and Reinforced Concrete)
  • Article
  • Open Access
361 Views
26 Pages

A Coupled Load–Damage–Diffusion Model for Sulfate Transport in Concrete Under Static and Fatigue Loading with Drying–Wetting Cycles

  • Bing Yao,
  • Jianjian Sun,
  • Zhexing Wang,
  • Wanli Cheng and ,
  • Qiang Han,
  • Jinjun Guo,
  • Yuanyuan Cheng and
  • Kun Wang
  • + 3 authors+ 0 author

External sulfate attack constitutes a major durability challenge for structural concrete, yet the influence of mechanical loads on sulfate transport remains incompletely understood. This study develops a coupled sulfate–water transport model th...

(This article belongs to the Section Computational and Numerical Mathematics)
  • Article
  • Open Access
5 Citations
3,791 Views
16 Pages

31 March 2020

In this study, the response quantities affecting the equivalent yield curvature, which is important in the deformation-based seismic design and assessment of structural systems, are investigated for reinforced concrete columns with a square cross-sec...

(This article belongs to the Special Issue Simulation and Analysis of Materials Failure Under Loading)
  • Article
  • Open Access
1 Citations
902 Views
28 Pages

Numerical Investigation on the Axial Behavior and Confinement Effect of Concrete-Filled Steel Tube Stub Columns

  • Yao Wang,
  • Shufeng Zhang,
  • Feng Zhang,
  • Minjie Tu and ,
  • Hongguang Xu and
  • Dong Li
  • + 1 author+ 0 author

Concrete-filled steel tubes (CFST) exhibit superior axial performance compared with hollow steel tubes due to the confinement interaction between steel and concrete. Understanding how geometric and material parameters influence this enhancement is es...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
10 Citations
3,972 Views
12 Pages

Stress–Strain Assessment of Honeycomb Sandwich Panel Subjected to Uniaxial Compressive Load

  • Pasqualino Corigliano,
  • Giulia Palomba,
  • Vincenzo Crupi and
  • Yordan Garbatov

The ship hull structure is composed of plates and stiffened panels. Estimating the maximum load-carrying capacity, or the ultimate strength, of these structural components is fundamental. One of the main challenges nowadays is the implementation of n...

(This article belongs to the Special Issue Lightweight and Additively Manufactured Structures in Marine Applications)
  • Article
  • Open Access
11 Citations
3,188 Views
16 Pages

Experimental and Numerical Study on Axial Compression Cold-Formed Steel Composite Wall under Concentrated Loads

  • Bin Yao,
  • Haojie Fang,
  • Zhenghao Qian,
  • Qiang Wang and ,
  • Jian Sun and
  • Weiyong Wang
  • + 1 author+ 0 author

This paper presents the experimental and numerical studies in the investigation of the concentrated compressive behaviors of cold-formed steel-foam concrete composite wall. The failure modes, load–displacement curves, and load–strain curv...

(This article belongs to the Topic New Trends in Advanced Construction Technology, Sustainable Construction Materials and High-Performance Building Structures)
  • Article
  • Open Access
14 Citations
3,299 Views
20 Pages

Experimental Investigation of Axially Loaded Precast Sandwich Panels

  • Kamirã Barbosa,
  • William T. M. Silva,
  • Ramon Silva,
  • Welington Vital and
  • Luciano M. Bezerra

4 August 2023

This paper reports the results of three thin wythe precast sandwich panels tested under axial load. Panel reinforcements and shear connectors in the current state of precast sandwich panels in the civil construction context are evaluated. The authors...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
10 Citations
3,030 Views
23 Pages

20 March 2022

There are many horizontal joints on precast concrete (PC) wall panel structures, which certainly has a significant impact on the seismic behavior of structures. This paper proposes a novel alveolar-type horizontal joint, which has advantages of conve...

(This article belongs to the Special Issue Confined Concrete and Its Application in Structural Engineering)
  • Article
  • Open Access
14 Citations
2,613 Views
17 Pages

Compressive Capacity Prediction of Stirrup-Confined Concrete Columns Using Neuro-Fuzzy System

  • Hosein Naderpour,
  • Mahdi Akbari,
  • Masoomeh Mirrashid and
  • Denise-Penelope N. Kontoni

5 September 2022

The compressive capacity of the column is one of the key parameters in the design. The importance of such structural members and their performance under load conditions are very effective in the overall behavior of the structure, and its failure can...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
11 Citations
5,068 Views
25 Pages

Structural Behavior of Circular Concrete Columns Reinforced with Longitudinal GFRP Rebars under Axial Load

  • Seyed Fathollah Sajedi,
  • Iman Saffarian,
  • Masoud Pourbaba and
  • Jung Heum Yeon

This paper presents experimental and theoretical assessments of the structural behavior of circular steel fiber-reinforced concrete (SFRC) columns reinforced with glass fiber-reinforced polymer (GFRP) bars subjected to a concentric axial compressive...

(This article belongs to the Special Issue Advanced Design & Behavior of Concrete Structures)
  • Article
  • Open Access
12 Citations
2,629 Views
21 Pages

Laminated fibre-reinforced polymer (FRP) tubes are increasingly used as compression members in large-span spatial structures due to their high bearing capacity, corrosion resistance, and superior stability compared to high-strength steel pipes. In th...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
1 Citations
1,131 Views
18 Pages

Axial Compression Properties of Recycled Concrete-Filled Circular Steel Tubular Column Subject to Corrosion

  • Dongxia Hu,
  • Jin Wu,
  • Zhe Feng,
  • Renming Liu and ,
  • Shefeng Guo and
  • Liqiang Liu
  • + 1 author+ 0 author

27 August 2025

In order to investigate the change in the axial compression performance of circular recycled concrete-filled steel tubular short columns under chloride ion corrosion, 24 circular recycled concrete-filled steel tubular (RCFST) short columns and 12 cir...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
529 Views
20 Pages

Stress-State-Based Failure Analysis and Modeling of UHPC Columns Confined with High-Strength Spiral Stirrups

  • Yan Zhao,
  • Xiong Xie,
  • Zhen Xu,
  • Min Zhang and ,
  • Xiaotian Lin and
  • Wei Chang
  • + 1 author+ 0 author

27 March 2026

This study investigated the failure mechanism and load-bearing capacity of ultra-high-performance concrete (UHPC) columns confined with high-strength spiral stirrups under axial compression. Based on tests of 75 specimens, a structural stability anal...

(This article belongs to the Special Issue Sustainable and Low-Carbon Building Materials and Structures)
  • Article
  • Open Access
3 Citations
812 Views
20 Pages

Thin HPFRC Jackets for Axially Loaded RC Columns: Mechanical Behavior and Efficacy of Strengthening

  • Maria Dolores Criado Fernández,
  • Sonia Martínez de Mingo and
  • Ana Almerich-Chulia

6 January 2026

The environmental impact of the construction sector underscores the urgent need for sustainable solutions to extend the service life of existing structures. This study explores High-Performance Fiber-Reinforced Concrete (HPFRC) for strengthening rein...

(This article belongs to the Special Issue Advances in Ultra-High Performance Concretes and Cementitious Composites)
  • Feature Paper
  • Article
  • Open Access
1 Citations
5,394 Views
20 Pages

Experimental Investigation of the CFS-PU Composite Wall Panel under Axial Compression

  • Antonio Bakran,
  • Paulina Krolo,
  • Lazar Lukačević and
  • Ivan Palijan

This study presents an innovative design for a cold-formed steel polyurethane (CFS-PU) composite wall panel, combining a cold-formed steel frame, a polyurethane foam infill, and a gypsum fibreboard sheathing. The foam filling process, in which the fo...

(This article belongs to the Special Issue Cold-Formed Steel Structures)
  • Article
  • Open Access
8 Citations
3,840 Views
19 Pages

18 March 2023

This paper presents a numerical study examining the dynamic response and resistance mechanism of reinforced concrete (RC) columns strengthened with or without carbon-fiber-reinforced polymer (CFRP) wraps under lateral impact loading by using the soft...

(This article belongs to the Special Issue Impact Behaviour of Materials and Structures)
  • Article
  • Open Access
2 Citations
2,680 Views
13 Pages

Buckling Behavior of Non-Retrofitted and FRP-Retrofitted Steel CHS T-Joints

  • Amin Yazdi,
  • Maria Rashidi,
  • Mohammad Alembagheri and
  • Bijan Samali

31 March 2021

This paper aims to investigate the buckling behavior of circular hollow section (CHS) T-joints in retrofitted and non-retrofitted states under axial brace compressive loading. For this purpose, two types of analysis are carried out. The first one is...

  • Article
  • Open Access
3 Citations
1,923 Views
22 Pages

30 August 2025

This study explores the potential use of Polyethylene Terephthalate (PET) plastic bottles as void makers in short reinforced concrete columns under pure axial compression. Such a scheme promotes sustainability by decreasing the consumption of concret...

(This article belongs to the Section Green Building)
  • Article
  • Open Access
781 Views
15 Pages

Research on Axial Load Transfer Law of Machine-Picked Seed Cotton and Discrete Element Simulation

  • Yuanchao Li,
  • Yan Zhao,
  • Maile Zhou,
  • Xinliang Tian and ,
  • Daqing Yin,
  • Huinan Qiao and
  • Wenzhe Wang
  • + 2 authors+ 0 author

The compression deformation of seed cotton has been identified as a key factor affecting the working reliability of the baling device and the quality of bale molding. However, due to the complex working conditions of seed cotton in the continuous com...

  • Article
  • Open Access
12 Citations
3,564 Views
25 Pages

The objective of this study was to investigate the effectiveness of different confinement materials in strengthening geopolymer concrete (GP) columns subjected to axial compression loading. This research encompassed both experimental and numerical an...

(This article belongs to the Special Issue Advances in Modeling and Characterization of Cementitious Composites)
  • Article
  • Open Access
4 Citations
3,663 Views
24 Pages

Mechanical Performance of Confined Autoclaved Fly-Ash-Brick Masonry Walls under Cyclic Loading

  • Bo Wen,
  • Lu Zhang,
  • Ditao Niu,
  • Guanyi Gao and ,
  • Yongkang Kang and
  • Daming Luo
  • + 1 author+ 0 author

10 November 2021

In order to solve the limitations of masonry structures, such as poor seismic performance, complicated construction techniques, and energy wastage of wall materials, a new type of confined autoclaved fly-ash-brick wall was proposed and its mechanical...

(This article belongs to the Special Issue Structural Vibration: Analysis, Control, Experiment, and Applications II)
  • Article
  • Open Access
4 Citations
2,997 Views
15 Pages

Axial Impact Load of a Concrete-Filled Steel Tubular Member with Axial Compression Considering the Creep Effect

  • Tao Lan,
  • Guangchong Qin,
  • Jinzhao Zhuang,
  • Youdi Wang and ,
  • Qian Zheng and
  • Min Ding
  • + 1 author+ 0 author

26 September 2019

The dynamic loads acting on concrete-filled steel tubular members under axial impacts by rigid bodies were studied herein by FEM. The whole impact process was simulated and the time history of the impact load was obtained. The effects of eight factor...

(This article belongs to the Special Issue Ceramics and Construction Materials)
  • Article
  • Open Access
11 Citations
8,319 Views
16 Pages

Axial Compression Behavior of FRP Confined Laminated Timber Columns under Cyclic Loadings

  • Feng Shi,
  • Libin Wang,
  • Hao Du,
  • Min Zhao and ,
  • Hao Li,
  • Feiqiu Wang and
  • Shuangjun Wang
  • + 2 authors+ 0 author

1 November 2022

Fiber reinforced polymer (FRP) has been proved to be effective to improve the structural strength and ductility for column structures. An experimental study was conducted to investigate the compressive performance of FRP confined glued-laminated timb...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
47 Citations
6,729 Views
19 Pages

Quantification of Uncertainties on the Critical Buckling Load of Columns under Axial Compression with Uncertain Random Materials

  • Hai-Bang Ly,
  • Christophe Desceliers,
  • Lu Minh Le,
  • Tien-Thinh Le and ,
  • Binh Thai Pham,
  • Long Nguyen-Ngoc,
  • Van Thuan Doan and
  • Minh Le
  • + 3 authors+ 0 author

5 June 2019

This study is devoted to the modeling and simulation of uncertainties in the constitutive elastic properties of material constituting a circular column under axial compression. To this aim, a probabilistic model dedicated to the construction of posit...

(This article belongs to the Special Issue Randomness and Uncertainty)
  • Article
  • Open Access
16 Citations
8,186 Views
17 Pages

A 3D-Printed Honeycomb Cell Geometry Design with Enhanced Energy Absorption under Axial and Lateral Quasi-Static Compression Loads

  • Marco Menegozzo,
  • Andrés Cecchini,
  • Frederick A. Just-Agosto,
  • David Serrano Acevedo and ,
  • Orlando J. Flores Velez,
  • Isaac Acevedo-Figueroa and
  • Jancary De Jesús Ruiz
  • + 2 authors+ 0 author

14 March 2022

This work presents an innovative honeycomb cell geometry design with enhanced in-plane energy absorption under quasi-static lateral loads. Numerical and experimental compression tests results under axial and lateral loads are analyzed. The proposed c...

(This article belongs to the Special Issue Mechanical Design Technologies for Beam, Plate and Shell Structures)
  • Article
  • Open Access
1 Citations
2,641 Views
14 Pages

30 October 2022

The objective of this study is to provide a theoretical method to accurately calculate the stress and strain of steel-reinforced concrete (SRC) columns under long-term axial compression. First, considering the cross-sectional stress redistribution an...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
8 Citations
4,782 Views
25 Pages

13 November 2024

This paper presents a modified finite element analysis (FEA) model for predicting the axial compression strength of large-diameter concrete-filled steel tubular (CFST) stub columns, addressing the gap in research that has often focused on smaller dia...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
5 Citations
2,700 Views
17 Pages

Deterioration of Mechanical Properties of Axial Compression Concrete Columns with Corroded Stirrups Coupling on Load and Chloride

  • Xiaoping Zhong,
  • Jiahao Li,
  • Jiahao Xu,
  • Kailai Wang and ,
  • Bingxi Zhu,
  • Yang Liu and
  • Keting Ni
  • + 2 authors+ 0 author

13 February 2023

To research the deterioration of the mechanical properties of stirrup-corroded concrete columns under the effect of load and chloride, accelerated corrosion and load carrying capacity tests were carried out on concrete columns subjected to long-term...

(This article belongs to the Section Civil Engineering)
  • Communication
  • Open Access
2 Citations
1,918 Views
12 Pages

6 October 2023

In order to analyze the axial compressive properties of ultra-high-toughness cementitious composite (UHTCC)-confined recycled aggregate concrete (RAC), a batch of UHTCC-confined RAC components was designed and manufactured according to the requiremen...

(This article belongs to the Special Issue Innovative Material Design and Nondestructive Testing Applications for Infrastructure Materials)
  • Article
  • Open Access
4 Citations
1,519 Views
25 Pages

29 December 2025

This study presents a machine learning framework for predicting the axial compressive strength of circular concrete-filled steel tube (CFST) columns subjected to concentric and eccentrically applied axial loads. A harmonized database of 1287 test spe...

(This article belongs to the Collection Advanced Concrete Materials in Construction)

of 23