Skip to Content

496 Results Found

  • Article
  • Open Access
8 Citations
5,905 Views
27 Pages

Formulating an Engineering Framework for Future AI Certification in Aviation

  • Johann Maximilian Christensen,
  • Thomas Stefani,
  • Akshay Anilkumar Girija,
  • Elena Hoemann and ,
  • Andrea Vogt,
  • Viktor Werbilo,
  • Umut Durak,
  • Frank Köster,
  • Thomas Krüger and
  • Sven Hallerbach
  • + 5 authors+ 0 author

A continuous increase in artificial intelligence (AI)-based functions can be expected for future aviation systems, posing significant challenges to traditional development processes. Established systems engineering frameworks, such as the V-model, ar...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
2 Citations
1,373 Views
18 Pages

Insight into the Common W-Shaped Uneven Solidification Profile in Slab Casting: From Mechanisms to Targeted Strategies

  • Hao Geng,
  • Feifei Yang,
  • Shuaikang Xia,
  • Pu Wang and ,
  • Jinwen Jin and
  • Jiaquan Zhang
  • + 1 author+ 0 author

18 April 2025

This study elucidates the underlying formation mechanisms and mitigation strategies for the W-shaped solidification profile in slab continuous casting. Through the development of a multiphysics coupling numerical model, integrated with measured nozzl...

(This article belongs to the Special Issue Research on Metal Cutting, Casting, Forming, and Heat Treatment)
  • Article
  • Open Access
2 Citations
2,218 Views
30 Pages

Formulating a Learning Assurance-Based Framework for AI-Based Systems in Aviation

  • Friedrich Werner,
  • Johann Maximilian Christensen,
  • Thomas Stefani,
  • Frank Köster and ,
  • Elena Hoemann and
  • Sven Hallerbach
  • + 1 author+ 0 author

19 February 2026

The European Union Aviation Safety Agency (EASA) is developing guidelines to certify AI-based systems in aviation with learning assurance as a key framework. Central to the learning assurance are the definitions of a Concept of Operations, an Operati...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
2 Citations
1,632 Views
26 Pages

Mechanism of Pit Formation on Surface of Superconducting Niobium Cavities During Buffered Chemical Polishing

  • Zheng Wang,
  • Jinfang Chen,
  • Yawei Huang,
  • Yue Zong and ,
  • Shuai Xing,
  • Jiani Wu,
  • Xiaowei Wu,
  • Pengcheng Dong,
  • Runzhi Xia and
  • Dong Wang
  • + 10 authors+ 5 authors

16 February 2025

Superconducting radio-frequency niobium cavities processed using buffered chemical polishing (BCP) sometimes show typical W-shaped pits on their surface, which may greatly limit their performance. However, the causes of such pits and effective soluti...

  • Article
  • Open Access
21 Citations
7,751 Views
13 Pages

Inline Optical Coherence Tomography for Multidirectional Process Monitoring in a Coaxial LMD-w Process

  • Charlotte Stehmar,
  • Marius Gipperich,
  • Markus Kogel-Hollacher,
  • Alfredo Velazquez Iturbide and
  • Robert H. Schmitt

5 March 2022

Within additive manufacturing, process stability is still an unsolved challenge. Process instabilities result from the complexity of laser deposition processes and the dependence of the quality of the workpiece on a variety of factors in the process....

(This article belongs to the Special Issue New Trends in Manufacturing Metrology)
  • Article
  • Open Access
307 Views
18 Pages

Precision Compensation and Annealing Process Exploration for Near-Net Cold Forming of Ta-2.5W Shaped Charge Liners

  • Tingjun Cai,
  • Haicheng Shi,
  • Wentai Zhao,
  • Bowen Pan and ,
  • Hao Wu,
  • Guiqian Xiao,
  • Liming Gong and
  • Guozheng Quan
  • + 3 authors+ 0 author

2 September 2026

Ta-2.5W alloy is a promising liner material for high-performance shaped-charge warheads because of its high density and excellent dynamic mechanical properties. However, conventional machining and hot-forming routes suffer from low material utilizati...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
8 Citations
4,302 Views
14 Pages

Learning Assurance Analysis for Further Certification Process of Machine Learning Techniques: Case-Study Air Traffic Conflict Detection Predictor

  • Javier A. Pérez-Castán,
  • Luis Pérez Sanz,
  • Marta Fernández-Castellano,
  • Tomislav Radišić and ,
  • Kristina Samardžić and
  • Ivan Tukarić
  • + 1 author+ 0 author

10 October 2022

Designing and developing artificial intelligence (AI)-based systems that can be trusted justifiably is one of the main issues aviation must face in the coming years. European Union Aviation Safety Agency (EASA) has developed a user guide that could b...

(This article belongs to the Special Issue Sensors for Navigation and Control Systems)
  • Article
  • Open Access
28 Citations
6,957 Views
12 Pages

3D-Printed Modular Microfluidic Device Enabling Preconcentrating Bacteria and Purifying Bacterial DNA in Blood for Improving the Sensitivity of Molecular Diagnostics

  • Abdurhaman Teyib Abafogi,
  • Jaewon Kim,
  • Jinyeop Lee,
  • Merem Omer Mohammed and ,
  • Danny van Noort and
  • Sungsu Park
  • + 1 author+ 0 author

21 February 2020

Molecular diagnostics for sepsis is still a challenge due to the presence of compounds that interfere with gene amplification and bacteria at concentrations lower than the limit of detection (LOD). Here, we report on the development of a 3D printed m...

(This article belongs to the Section Sensor Materials)
  • Article
  • Open Access
2 Citations
1,997 Views
15 Pages

Based on a sample of 92 listed renewable energy enterprises in China from 2007–2017, this paper empirically examines the nonlinear effect of environmental policies on renewable energy investments using a semiparametric regression model. Environ...

  • Article
  • Open Access
18 Citations
11,423 Views
24 Pages

Internationalization, Strategic Slack Resources, and Firm Performance: The Case Study of Vietnamese Enterprises

  • Phuong V. Nguyen,
  • Hien Thi Ngoc Huynh,
  • Hoa Doan Xuan Trieu and
  • Khoa T. Tran

The study attempted to fill a gap in the research on international business by providing fresh evidence of the effect of the degree of internationalization on firm performance and the influence of organizational slack on this relationship. By applyin...

(This article belongs to the Special Issue Contemporary Issues in Business and Economics)
  • Article
  • Open Access
5 Citations
2,658 Views
18 Pages

Micro-Abrasive Air Jet Machining Technology for Fabrication of Helical Grooves on Bovine Bone

  • Jialin Li,
  • Quanlai Li,
  • Yafeng Deng,
  • Weipeng Zhang and
  • Haonan Yin

28 January 2025

Biological bone screws play an important role in fixing fractures and bone defects. The machining of helical grooves on xenogenic materials is a key part of fabricating biological bone screws. The fabrication of helical grooves on bovine bone using m...

  • Article
  • Open Access
454 Views
20 Pages

20 August 2026

This study presents a systematic investigation into the mechanical responses of two tungsten-based alloys—84W–11.2Ni–4.8Fe and 88W–8.4Ni–3.6Fe—fabricated via selective laser melting (SLM). Quasi-static compression...

(This article belongs to the Special Issue Advances in Additive Manufacturing of Metallic Materials: Characterization, Properties and Applications)
  • Article
  • Open Access
1 Citations
2,302 Views
15 Pages

8 November 2024

Accurate deblending techniques are essential for the successful application of blended seismic acquisition. Deep-learning-based deblending methods typically begin by performing a pseudo-deblending operation on blended data, followed by further proces...

(This article belongs to the Special Issue New Technologies, Methods and Studies for Seismic and Radar Subsurface Exploration)
  • Article
  • Open Access
2 Citations
1,395 Views
19 Pages

Dynamic Response and Failure Mechanisms of Micropiles in Accumulation Landslides Under Earthquake

  • Nan Li,
  • Keqiang He,
  • Jingkun Li,
  • Ruian Wu and ,
  • Tianxun Xu and
  • Jinfeng Cao
  • + 1 author+ 0 author

10 February 2025

Micropiles are a new type of retaining structure widely used in slope engineering due to their small footprint, low vibration and noise emissions, and simple construction process. This study aims to investigate the dynamic response and failure mechan...

  • Article
  • Open Access
3 Citations
2,518 Views
26 Pages

Construction of Soliton Solutions of Time-Fractional Caudrey–Dodd–Gibbon–Sawada–Kotera Equation with Painlevé Analysis in Plasma Physics

  • Khadija Shakeel,
  • Alina Alb Lupas,
  • Muhammad Abbas,
  • Pshtiwan Othman Mohammed and ,
  • Farah Aini Abdullah and
  • Mohamed Abdelwahed
  • + 1 author+ 0 author

1 July 2024

Fractional calculus with symmetric kernels is a fast-growing field of mathematics with many applications in all branches of science and engineering, notably electromagnetic, biology, optics, viscoelasticity, fluid mechanics, electrochemistry, and sig...

(This article belongs to the Special Issue Application of Symmetry in Equations)
  • Article
  • Open Access
349 Views
21 Pages

Friction stir welding of T- and corner-joint configurations is challenging due to restricted tool accessibility, complex material flow and the limited availability of material for the formation of load-bearing fillet-weld geometries. This study intro...

(This article belongs to the Special Issue Advances in Welding Technology: 2nd Edition)
  • Article
  • Open Access
3 Citations
1,141 Views
14 Pages

Tensile and Flexural Behavior of Metal–Polymer Friction Stir Buttstrap Composite Panels

  • Arménio N. Correia,
  • Daniel F. O. Braga,
  • Ricardo Baptista and
  • Virgínia Infante

30 July 2025

This study investigates the friction stir joining of AA6082-T6 aluminum alloy and Noryl GFN2 polymer in a buttstrap configuration, targeting the development of lightweight cylindrical-shaped structures where the polymer provides thermal, chemical, an...

(This article belongs to the Special Issue Advancements in Polymeric Material Characterization for Industrial Applications: From Properties to Performance)
  • Article
  • Open Access
1,104 Views
14 Pages

Analysis of Fatigue Performance of Metallic Components with Gradient Microstructures

  • Pandi Zhao,
  • Liheng Tuo,
  • Hongrui Zhang,
  • Zhiyan Sun and ,
  • Shuai Ren,
  • Gaihuan Yuan and
  • Zebang Zheng
  • + 2 authors+ 0 author

27 June 2025

Studying the fatigue performance of metallic components and optimizing their design from the perspectives of structure, microstructure, and service conditions has long been a critical research focus. In this study, a comprehensive analysis was conduc...

(This article belongs to the Special Issue Crystallization of High Performance Metallic Materials (2nd Edition))
  • Article
  • Open Access
31 Citations
6,403 Views
13 Pages

The Effect of Joint Dip Angle on the Mechanical Behavior of Infilled Jointed Rock Masses under Uniaxial and Biaxial Compressions

  • Guansheng Han,
  • Hongwen Jing,
  • Yujing Jiang,
  • Richeng Liu and ,
  • Haijian Su and
  • Jiangyu Wu
  • + 1 author+ 0 author

3 May 2018

Due to the complex formation process of a rock mass, a large number of fissures, joints, faults, other defects exist and the defects commonly contain infilled materials. The jointed rock masses are in a complex geological environment, in which the ge...

  • Article
  • Open Access
10 Citations
6,238 Views
13 Pages

For joining metallic materials for battery applications such as copper and stainless steel, laser beam micro welding with beam sources in the near-infrared range has become established in recent years. In laser beam micro welding, spatial power modul...

(This article belongs to the Special Issue Advanced Joining Processes and Techniques)
  • Article
  • Open Access
4 Citations
2,809 Views
17 Pages

Numerical Analysis of the Impact Resistance of Composite A-Shaped Sandwich Structures

  • Xuetao Gu,
  • Jiawen Li,
  • Ji Huang,
  • Yaoliang Ao and
  • Bingxiong Zhao

16 July 2023

This paper focuses on the finite element analysis simulation of the impact properties of composite sandwich structures made of carbon fiber-reinforced polymer lamina. In the existing studies, the composite sandwich structures with A-shaped cores have...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
5 Citations
3,101 Views
21 Pages

24 July 2023

The Ashele ore concentration area is an important area for polymetallic ore concentration in Xinjiang, China. Scholars have made progress in understanding the ore-controlling structures, ore-bearing horizons, and metallogenic age of this area. Howeve...

(This article belongs to the Section Mineral Exploration Methods and Applications)
  • Article
  • Open Access
6 Citations
4,202 Views
26 Pages

28 August 2025

In the context of China’s ‘dual carbon’ strategy, sustainable port–city integration has become critical for regional transformation. Based on the green development perspective, this study constructed a “port–indust...

  • Article
  • Open Access
5 Citations
3,088 Views
20 Pages

Experimental Study of the Mechanical Behavior of a Steel Arch Structure Used in the Main Lining of a Highway Tunnel

  • Changjun Li,
  • Yizhou Zhuang,
  • Yuquan Lu,
  • Guoping Zheng and ,
  • Yunhui Zheng,
  • Wenhao Li,
  • Chenbo Xue,
  • Hongyu Guo and
  • Yuchao Fang
  • + 4 authors+ 0 author

21 August 2024

The steel rib and the lattice girder are two typical steel arch frames used in the primary lining of the New Austrian Tunnelling Method (NATM) highway tunnel. In the process of tunnel construction, it is necessary to choose the support method accordi...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
1,130 Views
28 Pages

Design and Performance Evaluation of a FSW Tool for Welding of AW 7075-T651 Aluminum Alloy

  • Roman Kukuča,
  • Jozef Bárta,
  • Katarína Bártová,
  • Ivan Buranský and ,
  • Milan Marônek,
  • František Jurina and
  • Peter Gogola
  • + 2 authors+ 0 author

Friction stir welding (FSW) is a solid-state joining process capable of producing high-quality joints in materials that are difficult to weld, particularly lightweight alloys. It is especially suitable for high-strength aluminum alloys like AW7075-T6...

  • Article
  • Open Access
7 Citations
3,471 Views
13 Pages

14 February 2020

A wrought Al-11.3Si-0.6Mg alloy under hot extrusion (T1), solution treatment (T4), and solution treatment + artificial aging (T6) states were friction stir welded at welding speed of 100 mm/min and rotation rate of 800 rpm. The effect of prior heat-t...

(This article belongs to the Collection Alloy and Process Development of Light Metals)
  • Article
  • Open Access
5 Citations
1,997 Views
15 Pages

23 April 2023

In order to prevent the problem of freezing pipe fracture in the process of artificial freezing construction, taking the main shaft freezing project of Shandong Yuncheng Mine as the background and based on the similarity theory, the similarity model...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
6 Citations
3,979 Views
29 Pages

16 April 2023

Proton transfer processes of organic molecules are key to charge transport and photoprotection in biological systems. Among them, excited-state intramolecular proton transfer (ESIPT) reactions are characterized by quick and efficient charge transfer...

(This article belongs to the Section Physical Chemistry)
  • Article
  • Open Access
3 Citations
848 Views
23 Pages

Microstructure Evolution-Induced Mechanical Response in Welded Joints of 7075-T6 Aluminium Alloy Thin Sheets Subjected to Different Friction Stir Paths

  • Jiajia Yang,
  • Feifan Lv,
  • Jie Liu,
  • Xiaoping Xie and ,
  • Qing Xu,
  • Pengju Xu,
  • Zenglei Ni,
  • Yong Huang and
  • Liang Huang
  • + 4 authors+ 0 author

2 February 2026

As a solid-state joining technology, friction stir welding (FSW) exhibits significant advantages for joining aluminium alloys, including low heat input and minimal formation of intermetallic compounds, thereby enhancing joint quality and mitigating d...

(This article belongs to the Special Issue Advances in Alloy Surface Mechanics: The Effects of Coating Technologies on Performance)
  • Article
  • Open Access
4 Citations
2,701 Views
19 Pages

26 August 2023

The land subsidence occurring over a goaf area after coal mining is a protracted process. The accurate prediction of long-term land subsidence over goaf areas relies heavily on the availability of long-term land subsidence monitoring data. However, t...

(This article belongs to the Special Issue Monitoring Geohazard from Synthetic Aperture Radar Interferometry)
  • Article
  • Open Access
9 Citations
6,595 Views
21 Pages

High-Performance NIR Laser-Beam Shaping and Materials Processing at 350 W with a Spatial Light Modulator

  • Shuchen Zuo,
  • Shuai Wang,
  • Cameron Pulham,
  • Yin Tang and ,
  • Walter Perrie,
  • Olivier J. Allegre,
  • Yue Tang,
  • Martin Sharp,
  • Jim Leach and
  • Geoff Dearden
  • + 10 authors+ 5 authors

Shaping or splitting of a Gaussian beam is often desired to optimise laser–material interactions, improving throughput and quality. This can be achieved holographically using liquid crystal-on-silicon spatial light modulators (LC-SLMs). Until r...

(This article belongs to the Section Lasers, Light Sources and Sensors)
  • Article
  • Open Access
13 Citations
2,639 Views
15 Pages

13 October 2023

Sinter sensible heat recovery via a vertical cooling furnace is a new type of waste heat recovery process proposed based on coke dry quenching. However, the segregation of the burden in a vertical cooling furnace is serious, resulting in a large amou...

(This article belongs to the Topic Advanced Processes in Metallurgical Technologies)
  • Article
  • Open Access
7 Citations
4,974 Views
12 Pages

13 June 2019

The mechanical properties and microstructure of W-6Ni-4Co alloy through solid phase sintering and two-step sintering process were investigated. The results demonstrated that the particle sizes of W-6Ni-4Co alloy milled powders increased firstly and d...

  • Communication
  • Open Access
12 Citations
1,550 Views
10 Pages

26 December 2024

I identify a point-symmetrical morphology in the core-collapse supernova remnant (CCSNR) W44 compatible with shaping by three or more pairs of jets in the jittering jets explosion mechanism (JJEM). Motivated by recent identifications of point-symmetr...

  • Article
  • Open Access
2 Citations
1,618 Views
14 Pages

3D Printing Assisted Injection Molding of Chemically Plated W-Cu Composite

  • Bo Yuan,
  • Wenwxin Liu,
  • Zhen Wang,
  • Zhongkai Li and ,
  • Xiaofang Pan,
  • Shurong Xu,
  • Shoujing Mao,
  • Ying Wu,
  • Yangyang Li and
  • Jun Liu
  • + 5 authors+ 0 author

21 April 2025

W-Cu composites are widely used in the fields of switch contact materials and electronic packages because of their high hardness, high plasticity, and excellent thermal conductivity, while the traditional W-Cu composite preparation process is often a...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
21 Citations
6,645 Views
14 Pages

Potato Tuber Shape Phenotyping Using RGB Imaging

  • Jonathan A. D. Neilson,
  • Anne M. Smith,
  • Lilia Mesina,
  • Rachel Vivian and ,
  • Susan Smienk and
  • David De Koyer
  • + 1 author+ 0 author

6 September 2021

Potato tuber shape is an important quality trait for breeding and variety development. Length to width (L/W) ratio is a commonly used method to score potato tubers for suitability for different markets and is relatively easy to measure, though labor...

(This article belongs to the Section Crop Breeding and Genetics)
  • Article
  • Open Access
101 Citations
11,246 Views
18 Pages

9 December 2021

A major factor slowing down the establishment of additive manufacturing processes as production processes is insufficient reproducibility and productivity. Therefore, this work investigates the influence of ring-shaped beam profiles on process stabil...

(This article belongs to the Special Issue Advances in Additive Manufacturing of Metals)
  • Article
  • Open Access
3 Citations
4,086 Views
10 Pages

Jet Penetration Performance of a Shaped Charge Liner Prepared by Metal Injection Molding

  • Zheyu He,
  • Yi Cheng,
  • Hao He,
  • Chuanfeng An and ,
  • Yuqing Huang,
  • Xiang Zhang and
  • Yimin Li
  • + 2 authors+ 0 author

16 June 2022

The metal injection molding (MIM) method was applied to manufacture a shaped charge liner (SCL) used for petroleum perforating bombs. Its application could overcome the drawback of heterogeneous density distribution prepared using the traditional pow...

(This article belongs to the Special Issue Recent Developments of Non-ferrous Alloys: Processing, Microstructure and Properties)
  • Article
  • Open Access
142 Views
18 Pages

CMOS-MEMS Photovoltaic Energy Harvester with an S-Shaped Diffusion Structure

  • Chin-Chou Huang,
  • Cheng-Chih Hsu and
  • Ching-Liang Dai

26 October 2026

This work presents a complementary metal oxide semiconductor (CMOS)-compatible photovoltaic energy harvester (PVEH) incorporating an S-shaped diffusion architecture for optical energy harvesting. The device is implemented using the CMOS process with...

(This article belongs to the Special Issue MEMS/NEMS Devices and Applications, 4th Edition)
  • Article
  • Open Access
4 Citations
1,789 Views
11 Pages

Quantum Graphene Asymmetric Devices for Harvesting Electromagnetic Energy

  • Mircea Dragoman,
  • Adrian Dinescu,
  • Martino Aldrigo and
  • Daniela Dragoman

28 June 2024

We present here the fabrication at the wafer level and the electrical performance of two types of graphene diodes: ballistic trapezoidal-shaped graphene diodes and lateral tunneling graphene diodes. In the case of the ballistic trapezoidal-shaped gra...

(This article belongs to the Section Nanoelectronics, Nanosensors and Devices)
  • Article
  • Open Access
4 Citations
2,770 Views
14 Pages

Process Parameter Optimization for Laser Powder Bed Fusion of Fe-Si Alloy Considering Surface Morphology and Track Width of Single Scan Track

  • Ho Sung Jang,
  • Su Heon Kim,
  • Geon-Woo Park,
  • Jong Bae Jeon and ,
  • Donghwi Kim,
  • Dohyung Kim,
  • Wang Ryeol Kim,
  • Yoon Suk Choi and
  • Sunmi Shin
  • + 4 authors+ 0 author

13 December 2023

A laser power bed fusion (L-PBF) manufacturing process was optimized by analyzing the surface morphology and track width w of single scan tracks (SSTs) on Fe-3.4wt.%Si. An SST was evaluated under process conditions of laser power P, scan speed V, and...

(This article belongs to the Section Metals and Alloys)
  • Feature Paper
  • Article
  • Open Access
5 Citations
1,990 Views
14 Pages

Mass Spectra Fitting as Diagnostic Tool for Magnetron Plasmas Generated in Ar and Ar/H2 Gases with Tungsten Targets

  • Cristina Craciun,
  • Silviu Daniel Stoica,
  • Bogdana Maria Mitu,
  • Tomy Acsente and
  • Gheorghe Dinescu

26 July 2023

In this work, we describe an ion mass spectra processing method from plasmas generated in Ar and Ar/H2 gases in contact with tungsten surfaces. For this purpose, advanced model functions, i.e., those suitable for fitting the experimental mass peak pr...

(This article belongs to the Special Issue Exclusive Feature Papers in Physical Chemistry)
  • Article
  • Open Access
6 Citations
3,927 Views
23 Pages

Impact of Wetting-Drying Cycles on Soil Intra-Aggregate Pore Architecture Under Different Management Systems

  • Luiz F. Pires,
  • Jocenei A. T. de Oliveira,
  • José V. Gaspareto,
  • Adolfo N. D. Posadas and
  • André L. F. Lourenço

In many soil processes, including solute and gas dynamics, the architecture of intra-aggregate pores is a crucial component. Soil management practices and wetting-drying (W-D) cycles, the latter having a significant impact on pore aggregation, are tw...

  • Feature Paper
  • Article
  • Open Access
12 Citations
2,850 Views
14 Pages

Effect of Aging Treatment on the Microstructure and Properties of 2.2 GPa Tungsten-Containing Maraging Steel

  • Shun Han,
  • Xinyang Li,
  • Yu Liu,
  • Ruming Geng and ,
  • Simin Lei,
  • Yong Li and
  • Chunxu Wang
  • + 2 authors+ 0 author

10 July 2023

Maraging steel is a prominent category of ultrahigh-strength steel (UHSS) characterized by excellent comprehensive properties, and it finds wide applications in manufacturing load-bearing structural components. In this study, a novel tungsten-contain...

  • Article
  • Open Access
1 Citations
487 Views
26 Pages

Macroscopic Failure Behavior and Crack Evolution of Random Fissured Sandstone: A Multi-Parameter Numerical Analysis

  • Xiaowei Liu,
  • Wenyao Yan,
  • Li Zhang,
  • Jiayuan Li and ,
  • Yaoyao Meng,
  • Xueliang Zhu,
  • Feng Li and
  • Yajuan Xin
  • + 3 authors+ 0 author

27 March 2026

The presence of random fissures significantly alters the mechanical properties and failure mechanisms of rocks. To systematically investigate the impact of fissures on the failure behavior of sandstone, a multivariable random fissure numerical model...

(This article belongs to the Special Issue Numerical Simulation for Engineering Safety: Applications in Engineering Field)
  • Article
  • Open Access
9 Citations
3,261 Views
15 Pages

Performance Evaluation of Input Power of Diode Laser on Machined Leather Specimen in Laser Beam Cutting Process

  • Tamer Khalaf,
  • Muthuramalingam Thangaraj,
  • Khaja Moiduddin,
  • Vasanth Swaminathan and ,
  • Syed Hammad Mian,
  • Faraz Ahmed and
  • Mohamed Kamaleldin Aboudaif
  • + 2 authors+ 0 author

17 March 2023

Numerous industries, including footwear, handicrafts, and the automobile industry, utilize leather materials. The main goal of this study was to investigate the effect of input power of the diode laser in laser cutting on vegetable chrome tanned buff...

(This article belongs to the Special Issue Advanced Machining Technology for Modern Engineering Materials)
  • Article
  • Open Access
14 Citations
2,869 Views
11 Pages

7 February 2021

Tungsten-based materials are the most prospective candidates for plasma-facing components of future fusion devices, such as DEMO. W-based composites and graded layers can serve as stress-relieving interlayers for the joints between plasma-facing armo...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
6 Citations
2,466 Views
18 Pages

Influence of Scanning Paths on the Weld Pool Behavior, Microstructure, and Mechanical Property of AA2060 Al-Li Alloy Joints by Laser Beam Oscillation Welding

  • Yanbo Song,
  • Ying Liang,
  • Hongbing Liu,
  • Luchan Lin and ,
  • Yanfeng Gao,
  • Hua Zhang and
  • Jin Yang
  • + 2 authors+ 0 author

20 August 2024

In this paper, the laser beam oscillation welding (LBOW) was utilized to weld a 2 mm thick AA2060 aluminum-lithium (Al-Li) alloy plate. The weld pool behaviors under three scanning paths (pure laser, O-shaped, and ∞-shaped) were investigated. I...

(This article belongs to the Special Issue Effects of Laser Treatment on Surface Characterization and Mechanical Properties of Alloys)
  • Article
  • Open Access
4 Citations
3,377 Views
15 Pages

Experimental Investigation into the Effect of Fin Shapes on Heat Dissipation Performance of Phase Change Heat Sink

  • Xu Liu,
  • Keyong Zhu,
  • Yijie Wei,
  • Ziwei Chen and ,
  • Mingming Ge and
  • Yong Huang
  • + 1 author+ 0 author

28 October 2022

In this paper, the thermal management of missile-borne components in a flight state is studied. Avoiding excessive component temperatures under the high-temperature circumstances brought by aerodynamic heat is a requirement to guarantee the equipment...

(This article belongs to the Special Issue Latest Advancements in Aeronautics and Astronautics: Celebrating the 70th Anniversary of Beihang University)
  • Article
  • Open Access
10 Citations
3,105 Views
17 Pages

Research on Deterioration Mechanism and High-Precision Modelling of the Core Loss for Amorphous Alloys after Wire-Cut Electric Discharge Machining

  • Xinyu Yang,
  • Shuheng Qiu,
  • Yuheng Wang,
  • Pengfei Zhao and ,
  • Yunpeng Gao,
  • Haifeng Wang and
  • Chi Zhang
  • + 2 authors+ 0 author

12 March 2023

Amorphous alloys (AAs) have the advantage of low core loss. Thus, they can be used in high-speed motor applications. However, compared with the nominal performances, the performance of the wire-cut electric discharge machine (W-EDM)-processed AA iron...

of 10