Skip to Content

7,436 Results Found

  • Article
  • Open Access
12 Citations
3,177 Views
24 Pages

A Wire Bow Model of Diamond Wire Sawing with Asymmetric Arc Hypothesis

  • Zhikui Dong,
  • Chenpu Zhang,
  • Ziliang Liu,
  • Yanheng Zhao and ,
  • Ke Xing and
  • Wenming Guo
  • + 1 author+ 0 author

Diamond wire sawing is the main processing method for hard and brittle materials, but the unreasonable matching of process parameters will reduce its cutting ability and stability. In this paper, the asymmetric arc hypothesis of a wire bow model is p...

(This article belongs to the Special Issue Advanced Manufacturing Technology and Systems, 2nd Edition)
  • Article
  • Open Access
15 Citations
3,865 Views
15 Pages

Wire Bow In Situ Measurement for Monitoring the Evolution of Sawing Capability of Diamond Wire Saw during Slicing Sapphire

  • Zixing Yang,
  • Hui Huang,
  • Xinjiang Liao,
  • Zhiyuan Lai and ,
  • Zhiteng Xu and
  • Yanjun Zhao
  • + 1 author+ 0 author

2 May 2024

Electroplated diamond wire sawing is widely used as a processing method to cut hard and brittle difficult-to-machine materials. Currently, obtaining the sawing capability of diamond wire saw through the wire bow is still difficult. In this paper, a m...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
38 Citations
13,131 Views
14 Pages

30 August 2019

Electromagnetic testing is the most widely used technique for the inspection of steel wire ropes. As one of the electromagnetic detecting approaches, the magnetic flux leakage (MFL) method has the best effect for the detection of broken wires. Howeve...

(This article belongs to the Section Physical Sensors)
  • Review
  • Open Access
6 Citations
4,524 Views
20 Pages

Single-Wire Transmission Methods: Justification of a Single-Wire Resonant Power Transmission System

  • Vadim Bolshev,
  • Leonid Yuferev,
  • Alexander Vinogradov and
  • Alexey Bukreev

30 June 2023

Electricity supply as well as the provision of other forms of resources is one of the foundations of efficient agriculture. However, due to the reduction in the number of people living in rural settlements, there have been a large number of power lin...

(This article belongs to the Topic Solving Grid Challenges with Combined Transmission and Distribution System Models)
  • Article
  • Open Access
4 Citations
3,542 Views
13 Pages

The Effects of Different Slurry Concentrations and Wire Speeds for Swinging and Non-Swinging Wire-Saw Machining

  • Yao-Yang Tsai,
  • Yi-Chian Chen,
  • Yunn-Shiuan Liao,
  • Chia-Chin Hsieh and ,
  • Chung-Chen Tsao and
  • Chun-Yao Hsu
  • + 1 author+ 0 author

20 October 2020

Slurry concentration and wire speed affect the yield and machining quality of ceramics (Al2O3) that are produced using wire-saw machining (WSM). This study determines the effect of slurry concentration and wire speed on the material removal rate (MRR...

(This article belongs to the Section AI-Enabled Process Engineering)
  • Article
  • Open Access
17 Citations
4,627 Views
21 Pages

A Procedure for Precise Determination and Compensation of Lead-Wire Resistance of a Two-Wire Resistance Temperature Detector

  • Apinai Rerkratn,
  • Supatsorn Prombut,
  • Thawatchai Kamsri,
  • Vanchai Riewruja and
  • Wandee Petchmaneelumka

31 May 2022

A procedure for the precise determination and compensation of the lead-wire resistance of a resistance transducer is presented. The proposed technique is suitable for a two-wire resistance transducer, especially the resistance temperature detector (R...

(This article belongs to the Special Issue Intelligent Circuits and Sensing Technologies)
  • Article
  • Open Access
16 Citations
5,960 Views
7 Pages

Palladium-coated copper wire with a flash-gold layer (PCA) is an oxidation-resistant fine wire that simultaneously has the properties of palladium-coated copper wire (PCC) and gold-coated copper wire. This research used an extreme sulfidation test to...

(This article belongs to the Section Microelectronics)
  • Feature Paper
  • Article
  • Open Access
55 Citations
9,982 Views
22 Pages

Hot-Wire Laser-Directed Energy Deposition: Process Characteristics and Benefits of Resistive Pre-Heating of the Feedstock Wire

  • Agnieszka Kisielewicz,
  • Karthikeyan Thalavai Pandian,
  • Daniel Sthen,
  • Petter Hagqvist and ,
  • Maria Asuncion Valiente Bermejo,
  • Fredrik Sikström and
  • Antonio Ancona
  • + 2 authors+ 0 author

13 April 2021

This study investigates the influence of resistive pre-heating of the feedstock wire (here called hot-wire) on the stability of laser-directed energy deposition of Duplex stainless steel. Data acquired online during depositions as well as metallograp...

(This article belongs to the Special Issue Advances in Metal Additive Manufacturing: New Materials, Process Enhancement, Monitoring and Sustainability)
  • Article
  • Open Access
9 Citations
7,260 Views
15 Pages

8 February 2023

The effects of contact conditions at the wire–die interface on the temperature distribution of the specimen and die are investigated to understand the wire drawing process. Finite element analysis and experiments are performed to analyze the te...

(This article belongs to the Topic Manufacturing and Processing of Materials for Transport Industry)
  • Article
  • Open Access
11 Citations
4,143 Views
22 Pages

20 July 2023

The special spatial structure and the long-term harsh working environment make the transient response of wire rope complicated, so accurate assessment and prediction of its mechanical characteristics are of great significance to ensure the safe and s...

(This article belongs to the Section Applied Industrial Technologies)
  • Feature Paper
  • Review
  • Open Access
60 Citations
15,439 Views
28 Pages

Wire Electrical Discharge Machining—A Review

  • Laurenţiu Slătineanu,
  • Oana Dodun,
  • Margareta Coteaţă,
  • Gheorghe Nagîţ and ,
  • Irina Beşliu Băncescu and
  • Adelina Hriţuc
  • + 1 author+ 0 author

28 October 2020

Wire electrical discharge machining has appeared mainly in response to the need for detachment with sufficiently high accuracy of parts of plate-type workpieces. The improvements introduced later allowed the extension of this machining technology to...

  • Article
  • Open Access
18 Citations
5,519 Views
10 Pages

16 April 2023

This study aimed to investigate the performance of zinc-coated brass wire in wire-cut electrical discharge machining (EDM) using an ultrasonic-assisted wire on tungsten carbide. The research focused on the effect of the wire electrode material on the...

(This article belongs to the Special Issue Micro-electro Discharge Machining: Principles, Recent Advancements and Applications, 3rd Edition)
  • Article
  • Open Access
10 Citations
6,271 Views
15 Pages

23 November 2017

This work offers an analysis of the wire feedability-related properties of Al-5Mg solid wire electrodes bearing Zr. Effects of Zr content on microstructures and mechanical properties of the Al-5Mg alloys were studied. Experimental results have demons...

(This article belongs to the Special Issue Light Weight Alloys: Processing, Properties and Their Applications)
  • Article
  • Open Access
10 Citations
3,555 Views
16 Pages

Comparative Study on Laser Welding Thick-Walled TC4 Titanium Alloy with Flux-Cored Wire and Cable Wire

  • Laibo Sun,
  • Mingqiu Wang,
  • Lujun Huang,
  • Naiwen Fang and ,
  • Pengbo Wu,
  • Ruisheng Huang,
  • Kai Xu,
  • Xingxing Wang,
  • Jian Qin and
  • Weimin Long
  • + 6 authors+ 1 author

10 February 2023

In the welding process of thick-walled titanium alloys, the selection of the wire type is one of the critical factors affecting the welding quality. In this paper, flux-cored and cable wires were used as filler materials in the welding of thick-walle...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
3,321 Views
15 Pages

Fabrication and Characterization of Ferrofluidic-Based Wire-Wound and Wire-Bonded Type Inductor for Continuous RF Tunable Inductor

  • Fatemeh Bani Torfian Hoveizavi,
  • Nuha Abdul Rhaffor,
  • Sofiyah Sal Hamid,
  • Khairu Anuar Mohamed Zain and ,
  • Shukri Korakkottil Kunhi Mohd,
  • Mohd Tafir Mustaffa and
  • Asrulnizam Abd Manaf
  • + 2 authors+ 0 author

29 May 2020

This paper reports on the novel implementation of a tunable solenoid inductor using the fluid-based inductance varying technique. The concept utilized material permeability variation that directly modifies self-induced magnetic flow density inside th...

(This article belongs to the Section Applied Physics General)
  • Article
  • Open Access
451 Views
15 Pages

Swing Arc Behavior and Thick-Wire Droplet Transfer Characteristics in Narrow-Gap GMAW Using Pre-Embedded Cold Wire

  • Zhengyu Zhu,
  • Yuqing Jiang,
  • Shubin Liu,
  • Yong Xiao and ,
  • Songyi Wu,
  • Jiayou Wang and
  • Yunli Lei
  • + 2 authors+ 0 author

13 July 2026

To improve the stability and controllability of narrow-gap welding (NGW) and systematically elucidate the mechanism by which pre-embedded cold wire modulates arc behavior and metal transfer, this study investigated the arc characteristics and metal t...

(This article belongs to the Special Issue Advances in Welding and Joining Processes for Metallic Materials)
  • Article
  • Open Access
938 Views
26 Pages

Machine Learning-Based Soft Sensor for Real-Time Wire Bow Prediction in Diamond Multi-Wire Sawing

  • Xiangyu Zhao,
  • Hua Liu,
  • Jie Yang,
  • Liang Zhu and ,
  • Heng Li,
  • Lemiao Qiu and
  • Shuyou Zhang
  • + 2 authors+ 0 author

16 March 2026

Real-time monitoring of wire bow is critical for ensuring wafer quality and preventing wire breakage in diamond multi-wire sawing (MWS). However, the deployment physical sensors in industrial MWS environments is hindered by severe sludge contaminatio...

(This article belongs to the Special Issue Soft Sensors and Sensing Techniques (2nd Edition))
  • Entry
  • Open Access
12 Citations
13,441 Views
12 Pages

Automobile Tires’ High-Carbon Steel Wire

  • Marina Polyakova and
  • Alexey Stolyarov

24 August 2021

It is a well-known fact that to manufacture an automobile tire more than 200 different materials are used, including high-carbon steel wire. In order to withstand the affecting forces, the tire tread is reinforced with steel wire or other products su...

(This article belongs to the Collection Encyclopedia of Engineering)
  • Review
  • Open Access
48 Citations
11,811 Views
17 Pages

Copper Wire Bonding: A Review

  • Hongliang Zhou,
  • Andong Chang,
  • Junling Fan,
  • Jun Cao and ,
  • Bin An,
  • Jie Xia,
  • Jingguang Yao,
  • Xiaobin Cui and
  • Yingchong Zhang
  • + 4 authors+ 0 author

16 August 2023

This paper provides a comprehensive review on copper (Cu) wire bonding. Firstly, it introduces the common types of Cu wire available in the market, including bare Cu wire, coated Cu wire, insulated Cu wire, and alloyed Cu wire. For each type, their c...

(This article belongs to the Special Issue Advanced Packaging for Microsystem Applications, 2nd Edition)
  • Article
  • Open Access
2,936 Views
24 Pages

1 September 2025

Particle accelerator laboratories, which enable world-class research across many scientific fields, depend on the magnets used to manipulate their particle beams for successful operation. The community employs various techniques, typically based on H...

(This article belongs to the Special Issue Advances in Magnetic Measurements)
  • Review
  • Open Access
34 Citations
6,071 Views
19 Pages

Comparison of Wire and Non-Wire Localisation Techniques in Breast Cancer Surgery: A Review of the Literature with Pooled Analysis

  • Shahram Shirazi,
  • Hamed Hajiesmaeili,
  • Muskaan Khosla,
  • Saima Taj and ,
  • Tapan Sircar and
  • Raghavan Vidya
  • + 1 author+ 0 author

13 July 2023

Background and Objectives: Wide local excision is a common procedure in the treatment of breast cancer. Wire-guided localisation (WGL) has been the gold standard for many years; however, several issues have been identified with this technique, and th...

(This article belongs to the Special Issue Challenges and Innovations in Breast Cancer Surgery)
  • Article
  • Open Access
6 Citations
3,123 Views
17 Pages

Incorporating silver wires into propellant has emerged as a highly effective strategy for enhancing propellant burning rates, a technique extensively deployed in the construction of numerous fielded sounding rockets and tactical missiles. Our researc...

(This article belongs to the Special Issue Combustion of Solid Propellants)
  • Article
  • Open Access
6 Citations
4,675 Views
12 Pages

8 July 2019

Rhodium is a rare material that is widely used in electrical and electronic components due to its excellent mechanical and electrical properties. Ultra-fine rhodium wires in particular are widely used in electronic components. In this study, a multi-...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
4 Citations
4,330 Views
25 Pages

1 November 2021

Achieving a higher quality in wire arc additive manufacturing (WAAM) is a result of the development of welding metallurgy, the development of filler wires, and the control of the thermophysical properties of the electric arc. In this paper, the autho...

(This article belongs to the Special Issue Advances in Additive Manufacturing of Metals)
  • Article
  • Open Access
39 Citations
2,849 Views
10 Pages

1 August 2010

Independent wire rope core (IWRC) is one of the fundamental components of complex wire ropes. It is a complex geometry and constructed by wrapping wire strands over a straight wire strand. The outer wires of the IWRC are double helical shaped feature...

  • Review
  • Open Access
22 Citations
7,274 Views
21 Pages

A Review of Silver Wire Bonding Techniques

  • Bin An,
  • Hongliang Zhou,
  • Jun Cao,
  • Pingmei Ming and ,
  • John Persic,
  • Jingguang Yao and
  • Andong Chang
  • + 2 authors+ 0 author

20 November 2023

The replacement of gold bonding wire with silver bonding wire can significantly reduce the cost of wire bonding. This paper provides a comprehensive overview of silver wire bonding technology. Firstly, it introduces various types of silver-based bond...

(This article belongs to the Special Issue MEMS Packaging Technologies and 3D Integration, 2nd Edition)
  • Article
  • Open Access
1,536 Views
15 Pages

8 March 2025

The drawability and microstructural homogeneity of twinning-induced plasticity (TWIP) steel were improved during the wire drawing process by utilizing a temperature gradient along the wire’s radial direction. The surface temperature of the wire...

  • Article
  • Open Access
14 Citations
8,271 Views
11 Pages

Reliability Criteria for Thick Bonding Wire

  • Turker Dagdelen,
  • Eihab Abdel-Rahman and
  • Mustafa Yavuz

17 April 2018

Bonding wire is one of the main interconnection techniques. Thick bonding wire is widely used in power modules and other high power applications. This study examined the case for extending the use of traditional thin wire reliability criteria, namely...

  • Article
  • Open Access
26 Citations
5,970 Views
13 Pages

In Situ Production of Titanium Aluminides during Wire Arc Additive Manufacturing with Hot-Wire Assisted GMAW Process

  • Philipp Henckell,
  • Yarop Ali,
  • Andreas Metz,
  • Jean Pierre Bergmann and
  • Jan Reimann

18 May 2019

As part of a feasibility study, an alternative production process for titanium aluminides was investigated. This process is based on in situ alloying by means of a multi-wire technique in the layer-wise additive manufacturing process. Thereby, gas me...

(This article belongs to the Special Issue Arc-based Additive Manufacturing)
  • Article
  • Open Access
7 Citations
2,372 Views
20 Pages

21 October 2023

To quantitatively identify internal wire breakage damage in mining wire ropes, a wire rope internal wire breakage signal identification method is proposed. First, the whale optimization algorithm is used to find the optimal value of the variational m...

  • Article
  • Open Access
12 Citations
3,951 Views
11 Pages

14 April 2021

Lower warp is required for the single crystal silicon wafers sawn by a fixed diamond wire saw with the thinness of a silicon wafer. The residual stress in the surface layer of the silicon wafer is the primary reason for warp, which is generated by th...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
63 Citations
7,788 Views
13 Pages

14 May 2019

The use of commercially available filler metals for wire and arc additive manufacturing (WAAM) of duplex stainless steel components results in a microstructure with a very low ferrite content. The ferrite–austenite ratio in the duplex stainless...

(This article belongs to the Special Issue Arc-based Additive Manufacturing)
  • Feature Paper
  • Article
  • Open Access
21 Citations
4,042 Views
13 Pages

5 August 2021

Wire arc additive manufacturing enables the production of near-net shape large-volume metallic components leveraging an established industrial base of welding and cladding technology and adapting it for layer-wise material deposition. However, the co...

(This article belongs to the Topic Additive Manufacturing)
  • Article
  • Open Access
2,939 Views
13 Pages

6 December 2024

Background: Traditional methods for palatal expansion using fixed appliances often face limitations in comfort and aesthetics. In comparison, aligner therapy has limitations, particularly regarding maxillary expansion. The aim of this study is to exa...

  • Article
  • Open Access
7 Citations
8,696 Views
10 Pages

20 August 2017

Copper wires have been attracting much attention for Large Scale Integration (LSI) bonding because of their excellent mechanical and electrical properties, in addition to their low material cost. The ends of these wires are usually joined to pads or...

(This article belongs to the Special Issue Advance in Crystalline Thin Wires)
  • Article
  • Open Access
11 Citations
5,476 Views
10 Pages

Microstructure of Joint between Stranded Wire and Substrate Welded by Ultrasonic Welding

  • Chihiro Iwamoto,
  • Keisuke Yamauchi,
  • Kazuki Motomura,
  • Yoichi Hashimoto and
  • Kensuke Hamada

5 February 2019

In order to improvement electronic and mechanical properties, welding between stranded wires and terminals is important. However, welding methods to obtain high-quality joints using stranded wires are still limited. In this report, we applied ultraso...

(This article belongs to the Special Issue Selected Papers from the NMJ2018)
  • Article
  • Open Access
19 Citations
3,146 Views
11 Pages

14 November 2022

The quantitative identification of broken wires is of great significance to maintain the safety of mechanical systems, such as steel wire ropes. However, in order to achieve high accuracy recognition results, a large number of fault samples are neces...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
1 Citations
3,255 Views
37 Pages

4 February 2025

A high-frequency model of the toroidal powder core inductor with litz wire winding is presented. In the analyzed model, the power losses that occurred in both the winding and the magnetic core were taken into account. A new method of determining the...

(This article belongs to the Section F3: Power Electronics)
  • Article
  • Open Access
1 Citations
4,049 Views
12 Pages

Multi-Wire Sawing of Translucent Alumina Ceramics

  • Lea Schmidtner,
  • Hannes Heinrich,
  • Marcel Fuchs,
  • Anke Pötzsch and ,
  • Stefan Janz,
  • Mathias Herrmann,
  • Christos Aneziris and
  • Thomas Kaden
  • + 3 authors+ 0 author

Multi-wire sawing has emerged as the leading technology in wafer production for a variety of semiconductor materials. This study investigates the process stability and efficiency of conventional semiconductor multi-wire slurry saws in routinely machi...

  • Review
  • Open Access
99 Citations
17,462 Views
24 Pages

Research Progress on Bonding Wire for Microelectronic Packaging

  • Hongliang Zhou,
  • Yingchong Zhang,
  • Jun Cao,
  • Chenghao Su and ,
  • Chong Li,
  • Andong Chang and
  • Bin An
  • + 2 authors+ 0 author

11 February 2023

Wire bonding is still the most popular chip interconnect technology in microelectronic packaging and will not be replaced by other interconnect methods for a long time in the future. Au bonding wire has been a mainstream semiconductor packaging mater...

(This article belongs to the Special Issue Emerging Micro Manufacturing Technologies and Applications)
  • Article
  • Open Access
8 Citations
4,208 Views
22 Pages

18 April 2022

The different behaviors of the mechanical properties of drawn and caliber-rolled wires with applied strain were investigated to determine the appropriate process between wire drawing and caliber rolling with consideration of materials and process con...

(This article belongs to the Topic Advanced Forming Technology of Metallic Materials)
  • Article
  • Open Access
7 Citations
3,111 Views
10 Pages

Splitting an Impacting Droplet by a Superhydrophobic Wire

  • Dong Song,
  • Changsheng Xu,
  • Baowei Song,
  • Guang Pan and ,
  • Haibao Hu and
  • Chang-Hwan Choi
  • + 1 author+ 0 author

30 November 2022

Splitting a droplet into several segments is of great significance in many applications such as the detection of tiny liquid samples, whereas the surface tension tends to hold liquid to remain as one drop, causing difficulty in separating the droplet...

(This article belongs to the Special Issue Recent Advances in Superhydrophobic and Icephobic Surfaces)
  • Article
  • Open Access
1 Citations
4,900 Views
14 Pages

Laser Welding on Cerclage Wire Joining in Femur Surgery

  • Nutchanat Thongchuea,
  • Eakkachai Warinsiriruk and
  • Yin-Tien Wang

1 April 2020

Stainless steel wires with fiber-laser welding on lap joints are first proposed in this study to be used as cerclage wire joints for modern femur surgery, because of their potentially larger joint strength and less loosening failure than traditional...

(This article belongs to the Special Issue Selected Papers from IMETI 2018)
  • Article
  • Open Access
2 Citations
1,059 Views
17 Pages

Microstructure and Mechanical Properties of Toughened Seven-Wire Electrogas Welding

  • Yong Chen,
  • Yulang Xu,
  • Xianrui Zhao,
  • Yefang Wang and ,
  • Wangwang Yu,
  • Tao Zhang and
  • Chenfu Fang
  • + 2 authors+ 0 author

31 March 2025

Based on the flexible adjustment of the seven-wire, this study will assemble a new toughened seven-wire which is combined with a common single welding wire and the existing welding wire containing ductile alloy element (Ni element), and the microstru...

(This article belongs to the Special Issue Advanced Welding in Alloys and Composites)
  • Article
  • Open Access
1 Citations
3,699 Views
8 Pages

Cyclic Fatigue, Torsional Resistance, and Angular Deflection of Two Heat-Treated Files: M-Wire Versus New F-Wire Technology

  • Ajinkya M. Pawar,
  • Unmesh Khanvilkar,
  • Shivani Mallishery,
  • Kashmira Sawant and ,
  • Ricardo Machado,
  • Gianluca Plotino,
  • Alexander Maniangat Luke,
  • Simy Mathew,
  • Musab Hamed Saeed and
  • Krishna Prasad Shetty
  • + 5 authors+ 0 author

12 October 2020

The cyclic fatigue, torsional resistance, and angular deflection of a new Fire-Wire rotary file (CricENDO) were compared. A total of 20 files of each type were tested. Cyclic fatigue testing was performed for each group (n = 10) by measuring the numb...

  • Article
  • Open Access
1 Citations
5,079 Views
16 Pages

Achievement of Automatic Copper Wire Elongation System

  • Hsiung-Cheng Lin and
  • Chung-Hao Cheng

15 May 2019

Copper wire is a major conduction material that carries a variety of signals in industry. Presently, automatic wire elongating machines to produce very thin wiresare available for manufacturing. However, the original wires for the elongating process...

  • Article
  • Open Access
1 Citations
3,382 Views
9 Pages

The Cyclic Fatigue Resistance of Different Lengths of CM Gold Wire and CM Blue Wire NiTi Alloy Endodontic Rotary Files: An In Vitro Study

  • Vicente Faus-Matoses,
  • Vicente Faus-Llácer,
  • Celia Ruiz-Sánchez,
  • Sofía Prats Gallego and ,
  • Álvaro Zubizarreta-Macho,
  • Beatriz Solano-Mendoza,
  • Benjamín Martín Biedma and
  • Ignacio Faus-Matoses
  • + 3 authors+ 0 author

5 April 2023

Background: The objective of the present study was to measure and compare how the length of CM Gold Wire and CM Blue Wire NiTi alloy endodontic rotary files impacts their resistance to cyclic fatigue. Methods: A total of 40 sterile endodontic rotary...

(This article belongs to the Section Applied Dentistry and Oral Sciences)
  • Article
  • Open Access
31 Citations
13,961 Views
31 Pages

Drive-By-Wire Development Process Based on ROS for an Autonomous Electric Vehicle

  • J. Felipe Arango,
  • Luis M. Bergasa,
  • Pedro A. Revenga,
  • Rafael Barea and ,
  • Elena López-Guillén,
  • Carlos Gómez-Huélamo,
  • Javier Araluce and
  • Rodrigo Gutiérrez
  • + 3 authors+ 0 author

27 October 2020

This paper presents the development process of a robust and ROS-based Drive-By-Wire system designed for an autonomous electric vehicle from scratch over an open source chassis. A revision of the vehicle characteristics and the different modules of ou...

(This article belongs to the Special Issue Sensors for Road Vehicles of the Future)
  • Short Note
  • Open Access
39 Citations
8,904 Views
6 Pages

A Magnetic Sensor with Amorphous Wire

  • Dongfeng He and
  • Mitsuharu Shiwa

17 June 2014

Using a FeCoSiB amorphous wire and a coil wrapped around it, we have developed a sensitive magnetic sensor. When a 5 mm long amorphous wire with the diameter of 0.1 mm was used, the magnetic field noise spectrum of the sensor was about 30 pT/ÖHz abo...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
2 Citations
1,636 Views
16 Pages

Research on Broken Wire Based on a Fine Finite Element Model of Steel Strands

  • Dongmei Tan,
  • Yongfa Luo,
  • Yu Tao,
  • Yu Peng and ,
  • Hao Luo and
  • Baifeng Ji
  • + 1 author+ 0 author

2 July 2025

In order to study the mechanical properties of seven-wire steel strands after wire breakage failure, this study is based on the established finite-element beam-element model of seven-wire steel strands and analyzes two failure forms of symmetric wire...

of 149