Skip to Content

108 Results Found

  • Article
  • Open Access
2 Citations
1,708 Views
23 Pages

Synergistic Multi-Mechanism Enhancement in Chemomechanical Abrasive Polishing of Polycrystalline Diamond via a New SiO2–Diamond Slurry in High-Concentration H2O2 Solution

  • Xin Zheng,
  • Ke Zheng,
  • Jie Gao,
  • Yan Wang and ,
  • Pengtao An,
  • Yongqiang Ma,
  • Hongjun Hei,
  • Shuaiwu Qu and
  • Shengwang Yu
  • + 4 authors+ 0 author

4 August 2025

The high-efficiency polishing of large-sized polycrystalline diamond (PCD) wafers continues to pose significant challenges in its practical applications. Conventional mechanical polishing suffers from a low material removal rate (MRR) and surface dam...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
1 Citations
785 Views
17 Pages

The High Solid Loading and Stability of SiO2 Ceramic Slurry for Stereolithography

  • Wenlu Zhang,
  • Chunfa Huang,
  • Shengjun Xia,
  • Xing Hu and
  • Qiulin Li

15 May 2026

Stereolithography (SL) based additive manufacturing technology facilitates fabricating structurally complicated silicon-based ceramic cores. However, SL fabricates ceramic component by layer-by-layer solidification of ceramic slurries. The instabilit...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
515 Views
16 Pages

13 July 2026

To improve the performance of recycled sand concrete (RSC), this study investigated the synergistic effects of the slurry-coating mixing method and Nano-SiO2 (NS). The strength, durability, and microstructure of concrete with different recycled sand...

(This article belongs to the Special Issue Development and Research of Cement-Based Materials)
  • Article
  • Open Access
7 Citations
2,204 Views
18 Pages

Poly(sodium styrene sulfonate)-Grafted SiO2 Nanoparticle: Synthesis and Use as a Water-Insoluble Dispersant for Coal Water Slurry

  • Guanghua Zhang,
  • Ruijun Liu,
  • Wanbin Zhang,
  • Kangmin Zhang and ,
  • Junfeng Zhu and
  • Ce Zhang
  • + 1 author+ 0 author

25 December 2024

This study introduces a novel water-insoluble dispersant for coal water slurry (CWS), namely, a poly(sodium styrene sulfonate)-grafted SiO2 nanoparticle (SiO2-g-PSSNa). SiO2-g-PSSNa was synthesized by combining the surface acylation reaction with sur...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
13 Citations
2,454 Views
19 Pages

29 August 2024

Ceramic slurry is the raw material used in stereolithography, and its performance determines the printing quality. Rheological behavior, one of the most important physical factors in stereolithography, is critical in ceramic printing, significantly a...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
19 Citations
5,260 Views
14 Pages

The Effects of Friction and Temperature in the Chemical–Mechanical Planarization Process

  • Filip Ilie,
  • Ileana-Liliana Minea,
  • Constantin Daniel Cotici and
  • Andrei-Florin Hristache

23 March 2023

Chemical–mechanical planarization (CMP) represents the preferred technology in which both chemical and mechanical interactions are combined to achieve global planarization/polishing of wafer surfaces (wafer patterns from metal with a selective...

  • Article
  • Open Access
7 Citations
2,543 Views
14 Pages

Monodisperse SiO2 Spheres: Efficient Synthesis and Applications in Chemical Mechanical Polishing

  • Jinlong Ge,
  • Yu Cao,
  • Hui Han,
  • Xiaoqi Jin and ,
  • Jing Liu,
  • Yuhong Jiao,
  • Qiuqin Wang and
  • Yan Gao
  • + 3 authors+ 0 author

27 April 2025

The atomic level polishing of a material surface affects the accuracy of devices and the application of materials. Silica slurries play an important role in chemical mechanical polishing (CMP) by polishing the material surface. In this study, an effi...

(This article belongs to the Topic Surface Science of Materials)
  • Article
  • Open Access
12 Citations
3,719 Views
11 Pages

Influences of Nonaqueous Slurry Components on Polishing 4H-SiC Substrate with a Fixed Abrasive Pad

  • Jiyuan Zhong,
  • Jiapeng Chen,
  • Hanqiang Wang,
  • Haibo Chen and ,
  • Yunyun Gu,
  • Juanfen Shen and
  • Tao Sun
  • + 2 authors+ 0 author

26 May 2023

4H-SiC wafers are more likely to sustain a lower material removal rate (MRR) and severe subsurface damage in conventional chemical mechanical polishing (CMP) methods. To overcome the material removal bottleneck imposed by aqueous chemistry, a high-ef...

(This article belongs to the Special Issue Surface Modification Treatments of Metallic Materials)
  • Article
  • Open Access
7 Citations
3,457 Views
12 Pages

Rheological Behavior of Oil Well Cement Slurries with Addition of Core/Shell TiO2@SiO2 Nanoparticles—Effect of Superplasticizer and Temperature

  • Giovanni dos Santos Batista,
  • Francisca Puertas,
  • Antonio Shigueaki Takimi,
  • Eleani Maria da Costa and
  • Marta Palacios

8 January 2025

This study investigates the rheological behavior of oil well cement pastes (OWCPs) modified with core/shell TiO2@SiO2 (nTS) nanoparticles and polycarboxylate-ether (PCE) superplasticizers at different temperatures (25, 45, and 60 °C). Results sho...

(This article belongs to the Special Issue Effect of Additives/Admixtures on the Properties of Concretes and Cementitious Composites)
  • Article
  • Open Access
51 Citations
4,382 Views
19 Pages

16 October 2020

Parent concrete coming from a wide range of sources can result in considerable differences in the properties of recycled coarse aggregate (RCA). In this study, the RCAs were obtained by crushing the parent concrete with water-to-cement ratios (W/Cpar...

(This article belongs to the Special Issue Advances in Green Construction Materials)
  • Article
  • Open Access
7 Citations
3,211 Views
21 Pages

8 February 2021

Adverse side-effects occurred in slurry foaming and thickening process when carbide slag was substituted for quicklime in HCS-AAC. Cement accelerators were introduced to modify the slurry foaming and coagulating process during pre-curing. Meanwhile,...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
2 Citations
808 Views
13 Pages

12 March 2026

As semiconductor devices continue to scale down and integrate more densely, the atomic-level planarization of metal interconnects and dielectric layers is critical. Consequently, the development of chemical mechanical planarization (CMP) materials mu...

(This article belongs to the Special Issue Synthesis and Applications of Nanomaterials)
  • Article
  • Open Access
37 Citations
5,115 Views
12 Pages

Shear Thickening Polishing of Quartz Glass

  • Qi Shao,
  • Shixiang Duan,
  • Lin Fu,
  • Binghai Lyu and ,
  • Ping Zhao and
  • Julong Yuan
  • + 1 author+ 0 author

13 August 2021

Quartz glass is a typical optical material. In this research, colloidal silica (SiO2) and colloidal cerium oxide (CeO2) are used as abrasive grains to polish quartz glass in the shear thickening polishing (STP) process. The STP method employs the she...

  • Article
  • Open Access
10 Citations
5,776 Views
14 Pages

We demonstrate that dispersion stability and excellent coating quality are achieved in polyethylene (PE) separators by premixing heterogeneous ceramics such as silica (SiO2) and alumina (Al2O3) in an aqueous solution, without the need for functional...

(This article belongs to the Section Battery Processing, Manufacturing and Recycling)
  • Article
  • Open Access
1,180 Views
12 Pages

13 July 2026

Single-crystal diamond (SCD) has the characteristics of a hard surface and stable chemical properties, making it difficult to achieve ultra-smooth and ultra-low-damage surface polishing using conventional polishing slurries. In this study, a novel gr...

(This article belongs to the Special Issue Future Trends in Ultra-Precision Machining, Second Edition)
  • Article
  • Open Access
7 Citations
4,846 Views
8 Pages

14 April 2018

This paper deals with the Si dissolution of fine perlite in alkaline solutions for the determination of the SiO2/Na2O mass ratio in the aqueous phase of geopolymer slurries. In the present work, the effect of the main synthesis parameters such as NaO...

(This article belongs to the Special Issue Geopolymers)
  • Article
  • Open Access
7 Citations
2,912 Views
9 Pages

Corrosion Behavior of SiO2-Al2O3 Glass Composite Coating on TC4 in Marine Environment

  • Wenbo Li,
  • Min Feng,
  • Lanlan Liu,
  • Jun Zhang and ,
  • Bo Hu and
  • Qiao Cheng
  • + 1 author+ 0 author

8 October 2022

Compressor blades made of TC4 that are serviced in marine environments suffer from severe active corrosion under the synergetic effect of NaCl and H2O(g). A SiO2-Al2O3 glass composite coating was applied on TC4 substrate for protection by first air s...

(This article belongs to the Topic Properties of the Corroding Interface)
  • Article
  • Open Access
6 Citations
7,304 Views
12 Pages

Ruthenium Modification on Mn and Zr-Modified Co/SiO2 Catalysts for Slurry-Phase Fischer-Tropsch Synthesis

  • Tomohisa Miyazawa,
  • Toshiaki Hanaoka,
  • Katsuya Shimura and
  • Satoshi Hirata

12 January 2015

The addition of Ru to Mn and Zr-modified Co/SiO2 catalysts, while applying different preparation orders and loading amounts, was investigated as a means of enhancing the Fischer-Tropsch synthesis reaction. The coimpregnation of Zr/SiO2 with Co, Mn an...

  • Article
  • Open Access
13 Citations
3,609 Views
13 Pages

Preparation and Properties of Highly Elastic, Lightweight, and Thermally Insulating SiO2 Fibrous Porous Materials

  • Yitian Li,
  • Anran Guo,
  • Xiaojing Xu,
  • Yunjia Xue and ,
  • Liwen Yan,
  • Feng Hou and
  • Jiachen Liu
  • + 2 authors+ 0 author

23 April 2022

Fibrous porous materials are one of the most commonly used high-temperature insulation materials because of their high porosity and low thermal conductivity. Due to their wide applications in the aerospace and energy industries, the investigation of...

(This article belongs to the Special Issue Advanced Ceramics and Composites: Design, Structure, Processing, Properties, and Applications)
  • Feature Paper
  • Article
  • Open Access
6 Citations
1,643 Views
12 Pages

17 April 2025

High-entropy silicide (MeSi2) coating was prepared by the slurry method and silicon infiltration method using Mo, Cr, Ta, Nb, W, and Si elemental powders as raw materials. The coating consisted of four layers, including a porous MeSi2 layer, a (CrTa)...

(This article belongs to the Section Ceramic Coatings and Engineering Technology)
  • Feature Paper
  • Article
  • Open Access
7 Citations
3,550 Views
15 Pages

Scavenger with Protonated Phosphite Ions for Incredible Nanoscale ZrO2-Abrasive Dispersant Stability Enhancement and Related Tungsten-Film Surface Chemical–Mechanical Planarization

  • Seong-In Kim,
  • Gi-Ppeum Jeong,
  • Seung-Jae Lee,
  • Jong-Chan Lee and ,
  • Jun-Myeong Lee,
  • Jin-Hyung Park,
  • Jae-Young Bae and
  • Jea-Gun Park
  • + 3 authors+ 0 author

4 December 2021

For scaling-down advanced nanoscale semiconductor devices, tungsten (W)-film surface chemical mechanical planarization (CMP) has rapidly evolved to increase the W-film surface polishing rate via Fenton-reaction acceleration and enhance nanoscale-abra...

(This article belongs to the Special Issue Investigation of Inorganic Nanomaterials: Synthesis, Structures and Properties)
  • Article
  • Open Access
4 Citations
1,946 Views
15 Pages

27 May 2024

In this paper, we conduct a comprehensive investigation into PVA fiber modified with SiO2 to improve the mechanical properties of oil-well cements. Specifically, SiO2 was coated onto the surface of polyvinyl alcohol fiber (PVAF) as its silicon source...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
3 Citations
2,473 Views
14 Pages

Effect of a Support on the Properties of Zinc Oxide Based Sorbents

  • Maciej Chomiak,
  • Bartłomiej M. Szyja,
  • Marta Jędrysiak and
  • Janusz Trawczyński

29 December 2021

We present the comparative analysis of three Zn-based sorbents for the process of sulphur removal from hot coal gas. The sorbents were prepared by a slurry impregnation of TiO2, SiO2 and Al2O3, resulting in complex, multiphase materials, with the dom...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
2 Citations
2,231 Views
29 Pages

Chemical Mechanical Polishing of Zerodur® Using Silica and Ceria Nanoparticles: Toward Ultra-Smooth Optical Surfaces

  • Houda Bellahsene,
  • Saad Sene,
  • Gautier Félix,
  • Nicolas Fabregue and ,
  • Michel Marcos,
  • Arnaud Uhart,
  • Jean-Charles Dupin,
  • Erwan Oliviero,
  • Joulia Larionova and
  • Yannick Guari
  • + 6 authors+ 1 author

10 September 2025

This study investigates hyperpolishing of Zerodur® substrates via chemical-mechanical polishing (CMP) using silica (SiO2) and ceria (CeO2) nanoparticles as controlled nano-abrasives. A pre-polishing stress-mirror stage was combined with systemati...

  • Article
  • Open Access
8 Citations
4,587 Views
12 Pages

Effect of MoSi2-Si3N4/SiC Multi-Layer Coating on the Oxidation Resistance of Carbon/Carbon Composites above 1770 K

  • Imran Abbas,
  • Yanxiang Wang,
  • Hassan Elahi,
  • Muhammad Ali Siddiqui and ,
  • Mudaser Ullah and
  • Faisal Qayyum
  • + 1 author+ 0 author

To improve the oxidation resistance of carbon/carbon composites at high temperatures (>1770 K), they were coated with MoSi2-Si3N4/SiC. The slurry and pack cementation methods were adopted to deposit the inner SiC layer and outer MoSi2-Si3N4 layer....

(This article belongs to the Special Issue Multifunctional Composites)
  • Article
  • Open Access
4 Citations
1,365 Views
19 Pages

Improved Properties of Ceramic Shells by Optimizing the Surface Composition from Lanthanide-Based Composites

  • Minghui Li,
  • Jianbo Yu,
  • Xia Li,
  • Zhigang Yang and ,
  • Zhongming Ren and
  • Xiaoxin Zhang
  • + 1 author+ 0 author

23 June 2025

The precision casting of nickel-based single-crystal superalloys imposes stringent requirements on the high-temperature stability and chemical inertness of ceramic shell face coats. To address the issue of traditional EC95 shells (95% Al2O3–5%...

(This article belongs to the Special Issue Advances in Ceramic Materials and Coatings)
  • Article
  • Open Access
27 Citations
6,874 Views
19 Pages

Development of an Iron-Based Fischer—Tropsch Catalyst with High Attrition Resistance and Stability for Industrial Application

  • Quan Lin,
  • Meng Cheng,
  • Kui Zhang,
  • Weizhen Li and ,
  • Peng Wu,
  • Hai Chang,
  • Yijun Lv and
  • Zhuowu Men
  • + 3 authors+ 0 author

27 July 2021

In order to develop an iron-based catalyst with high attrition resistance and stability for Fischer–Tropsch synthesis (FTS), a series of experiments were carried out to investigate the effects of SiO2 and its hydroxyl content and a boron promoter on...

(This article belongs to the Section Catalysis in Organic and Polymer Chemistry)
  • Article
  • Open Access
22 Citations
16,109 Views
23 Pages

15 December 2009

Fe-MCM-41 materials were prepared by different methods. The Fe was both incorporated into the structure and formed crystallites attached to the silica. High Fe content MCM-41 (~16 wt%) with retention of mesoporosity and long-range order was achieved...

(This article belongs to the Special Issue Porous Materials)
  • Article
  • Open Access
15 Citations
5,433 Views
20 Pages

19 December 2021

Canada’s mineral reserves can play a very important role in curbing climate change if natural alkaline minerals are used for the process of mineral carbonation. In this work, the potential of using two Canadian natural silicates for accelerated...

(This article belongs to the Section Mineralogical Crystallography and Biomineralization)
  • Article
  • Open Access
2 Citations
2,514 Views
14 Pages

Effect of Na+ on the Adsorption Behavior of Polystyrene Nanoparticles onto Coal and Quartz Surfaces

  • Yujin Sun,
  • Ning Jiang,
  • Xianshu Dong,
  • Yuping Fan and ,
  • Maoqing Yang,
  • Peng Xiong and
  • Yuran Chen
  • + 2 authors+ 0 author

The recovery of difficult-to-float coal using traditional nonpolar hydrocarbon oil collectors can be challenging, particularly for low-rank or oxidized coal. Thus, there is a need for more efficient flotation agents. Nanoparticle flotation collector...

(This article belongs to the Section Materials in Separation Science)
  • Article
  • Open Access
10 Citations
4,118 Views
13 Pages

Multitarget Evaluation of the Photocatalytic Activity of P25-SiO2 Prepared by Atomic Layer Deposition

  • Miguel Martín-Sómer,
  • Dominik Benz,
  • J. Ruud van Ommen and
  • Javier Marugán

22 April 2020

This work presents the evaluation of the photocatalytic activity of P25 TiO2 particles, coated with SiO2, using atomic layer deposition (ALD) for the photocatalytic removal of methylene blue, oxidation of methanol and inactivation of Escherichia coli...

(This article belongs to the Special Issue Novel Heterogeneous Catalysts for Advanced Oxidation Processes (AOPs))
  • Article
  • Open Access
1 Citations
3,331 Views
14 Pages

19 November 2019

Soil slurry was recycled to prepare a geopolymer after treatment with high-power ultrasound (US) in the presence of NH3, HCl, and NaOH. Under 28 kHz US, 0.1 M NH3 additives effectively decarbonized the slurry, eliminating 72.2% of the carbon content...

  • Article
  • Open Access
547 Views
20 Pages

18 May 2026

Aiming to address the problems of shield chamber blockage and poor muck discharge faced by earth pressure balance shields during tunneling in sandy strata, bentonite slurry is used for muck improvement. Using a multi-scale approach combining macro-sc...

  • Article
  • Open Access
8 Citations
7,719 Views
16 Pages

Hybrid CMP Slurry Supply System Using Ionization and Atomization

  • Hoseong Jo,
  • Da Sol Lee,
  • Seon Ho Jeong,
  • Hyun Seop Lee and
  • Hae Do Jeong

3 March 2021

Chemical mechanical planarization (CMP) is frequently used in semiconductor manufacturing to polish the surfaces of multiple layers in a wafer. The CMP uses a slurry that aids in fabricating a smooth surface by removing the excess materials. However,...

(This article belongs to the Special Issue Chemical Mechanical Polishing and Grinding)
  • Article
  • Open Access
12 Citations
3,297 Views
17 Pages

19 April 2023

To improve the oxidation resistance of Mo-based alloys, a novel (Mo,Hf)Si2-Al2O3 composite coating was fabricated on a Mo-based alloy by the method of slurry sintering. The isothermal oxidation behavior of the coating was evaluated at 1400 °C. Th...

(This article belongs to the Special Issue Advances in Coating Materials Research: From Preparation to Application)
  • Article
  • Open Access
687 Views
17 Pages

29 January 2026

Cemented tailings backfill (CTB) is widely used in mining operations due to its operational simplicity, reliable performance, and environmental benefits. However, the poor consolidation of fine tailings with ordinary Portland cement (OPC) remains a c...

  • Article
  • Open Access
28 Citations
4,975 Views
12 Pages

Carbonation of EAF Stainless Steel Slag and Its Effect on Chromium Leaching Characteristics

  • Ya-Jun Wang,
  • Meng-Jie Tao,
  • Jun-Guo Li,
  • Ya-Nan Zeng and ,
  • Song Qin and
  • Shao-Hua Liu
  • + 1 author+ 0 author

2 December 2021

EAF stainless steel slag (EAF slag) is one kind of chromium-bearing metallurgical solid waste, which belongs to alkaline steel slag, and contains a large number of alkaline mineral phases. The carbonation activity of these minerals gives EAF slag the...

(This article belongs to the Special Issue Metallurgical Slag)
  • Article
  • Open Access
1 Citations
1,077 Views
15 Pages

Design of New Eco-Cementitious Material Based on Foundry Slag and Lime Sludge

  • Camila Lopes Eckert,
  • Lucio Rosso Neto,
  • Carlos Henrique Borgert,
  • Júlio Preve Machado and ,
  • Felipe Fardin Grillo,
  • José Roberto de Oliveira,
  • Matheus Vinicius Gregory Zimmermann,
  • Mateus Milanez,
  • Tchesare Andreas Keller and
  • Eduardo Junca
  • + 8 authors+ 3 authors

8 October 2025

Foundry slag has different characteristics from blast furnace slag, such as its high SiO2 content and low basicity (CaO/SiO2 < 1), which prevent it from being used as a cementitious component. Lime slurry is a waste product with a high CaO content...

(This article belongs to the Special Issue Characterization and Reuse of Slag)
  • Article
  • Open Access
7 Citations
3,897 Views
36 Pages

Ceramic matrix composites (CMCs) have been designed and developed for extreme operating environments. The aim of the present study is to look for a rapid densification process providing a high level of material performance. The fibrous preform was ma...

(This article belongs to the Special Issue Ceramic-Matrix Composites)
  • Article
  • Open Access
9 Citations
3,192 Views
12 Pages

6 July 2023

The performance indicators of concrete are mainly determined by the interface characteristics between cement hydration slurry and aggregates. In this study, molecular dynamics technology was used to evaluate the effect of the interfacial water conten...

(This article belongs to the Special Issue Advances in Cement-Based Materials)
  • Article
  • Open Access
5 Citations
2,248 Views
17 Pages

Study on the Oxidation Behavior of TiB2-CeO2-Modified (Nb,Mo,Cr,W)Si2 Coating on the Surface of Niobium Alloy

  • Xiaojun Zhou,
  • Lairong Xiao,
  • Yitao Zha,
  • Jiawei Xu and ,
  • Jiashu Fang,
  • Guanzhi Deng,
  • Shaofu Xu,
  • Sainan Liu,
  • Xiaojun Zhao and
  • Zhenyang Cai
  • + 5 authors+ 0 author

28 October 2024

A novel TiB2-CeO2-modified (Nb,Mo,Cr,W)Si2 coating was prepared on a Nb-5W-2Mo-1Zr alloy substrate using two-step slurry sintering and halide-activated pack cementation to address the limitations of a single NbSi2 coating in meeting the service requi...

(This article belongs to the Special Issue Research on Performance Improvement of Advanced Alloys)
  • Article
  • Open Access
10 Citations
4,352 Views
19 Pages

Fabrication of Vitrified Bond Diamond Grinding Wheel via LCD Photopolymerization

  • Zhaoqi Chen,
  • Na Xiao,
  • Ping Han,
  • Zhao Wang and
  • Guoju Bai

13 December 2023

In this paper, a liquid crystal display (LCD) photopolymerization method is proposed, and a vitrified bond diamond grinding wheel is successfully prepared. A high-performance vitrified bond was obtained by melting SiO2-B2O3-Al2O3-Na2O ceramic raw mat...

(This article belongs to the Special Issue Recent Advances in the Machining of Metals and Composites)
  • Article
  • Open Access
11 Citations
5,500 Views
14 Pages

Rapid Fabrication of High-Performance CaO-Based Integral Ceramic Mould by Stereolithography and Non-Aqueous Gelcasting

  • Qiang Yang,
  • Weijun Zhu,
  • Zhongliang Lu,
  • Dichen Li and ,
  • Zhongrui Wang and
  • Fu Wang
  • + 1 author+ 0 author

21 March 2019

A high-performance CaO-based integral ceramic mould was fabricated for investment casting by stereolithography (SLA) and non-aqueous gelcasting. The rheology of tert-butyl alcohol (TBA)-based CaO slurries and the effect of gelation parameters on the...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
5 Citations
2,269 Views
12 Pages

Protection of 316L Steel Against LBE Corrosion by a CaO-MgO-Al2O3-SiO2 Glass–Ceramic Coating

  • Zunqi Xiao,
  • Zhizhong Jiang,
  • Lin Luo,
  • Yi Wan and ,
  • Aixue Liu,
  • Bin Zhang,
  • Bing Ren and
  • Jing Liu
  • + 3 authors+ 0 author

28 October 2024

A CaO-MgO-Al2O3-SiO2 glass–ceramic coating was prepared by the slurry method and subsequent sintering to improve the corrosion resistance of 316L steel in liquid lead–bismuth eutectic alloy at high temperatures. The glass–ceramic co...

(This article belongs to the Special Issue Novel Coatings for Corrosion Protection)
  • Article
  • Open Access
16 Citations
4,454 Views
16 Pages

8 September 2020

Erosion and erosion–corrosion tests of as-built Ti-6Al-4V manufactured by Selective Laser Melting were investigated using slurries composed of SiO2 sand particles and either tap water (pure water) or 3.5% NaCl solution (artificial seawater). Th...

  • Article
  • Open Access
19 Citations
3,790 Views
14 Pages

Polishing Performance and Removal Mechanism of Core-Shell Structured Diamond/SiO2 Abrasives on Sapphire Wafer

  • Guangen Zhao,
  • Yongchao Xu,
  • Qianting Wang,
  • Jun Liu and ,
  • Youji Zhan and
  • Bingsan Chen
  • + 1 author+ 0 author

7 December 2022

Corrosive and toxic solutions are normally employed to polish sapphire wafers, which easily cause environmental pollution. Applying green polishing techniques to obtain an ultrasmooth sapphire surface that is scratch-free and has low damage at high p...

(This article belongs to the Special Issue Advanced Micro- and Nano-Manufacturing Technologies)
  • Article
  • Open Access
714 Views
23 Pages

Tribological Behavior and Self-Lubrication Mechanisms of Cf/SiC-B12(C,Si,B)3 Composites Under Coupled Temperature-Velocity Conditions: A Preliminary Study

  • Xiaoyang Guo,
  • Shuaixu Chun,
  • Haifeng Nie,
  • Xuxin Ping and ,
  • Jingchen Yuan,
  • Quanxing Ren,
  • Yan Jiang,
  • Zhengren Huang,
  • Qing Huang and
  • Yinsheng Li
  • + 5 authors+ 0 author

23 April 2026

To address the increasing demands for lightweight, high-temperature resistant braking materials under extreme service conditions, a novel Cf/SiC-B12(C,Si,B)3 composite was developed in this work. The composite was fabricated via a hybrid slurry infil...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
5 Citations
2,722 Views
20 Pages

Behavior of Calcium Compounds under Hydrothermal Conditions during Alkaline Leaching of Aluminosilicates with the Synthesis of Fillers for Composites

  • Rinat Abdulvaliyev,
  • Nazym Akhmadiyeva,
  • Sergey Gladyshev,
  • Nazira Samenova and ,
  • Olga Kolesnikova and
  • Olimpiada Mankesheva
  • + 1 author+ 0 author

5 December 2023

Calcium oxide plays an important role in alumina production by binding SiO2 from aluminosilicate raw materials (bauxite, nepheline, kaolinite, etc.) in aluminum-free compounds. The efficiency of the hydrochemical technology depends on the activities...

(This article belongs to the Section Composites Manufacturing and Processing)
  • Article
  • Open Access
14 Citations
5,512 Views
12 Pages

1 July 2020

Lost-wax casting, also called precision casting, is the process of casting a duplicate metal sculpture cast an original sculpture. The ceramic shell mould used in lost-wax casting usually consists of several layers formed with fine zircon and granula...

(This article belongs to the Section Environmental Sciences)
  • Article
  • Open Access
10 Citations
3,228 Views
17 Pages

1 September 2021

Coatings with thickness 40 to 150 μm were formed by plasma electrolytic oxidation (PEO) on the zirconium alloy Zr-1Nb (Zr-1% Nb) in the slurry electrolyte containing 9 g/L Na2SiO3 5H2O, 5 g/L Na(PH2O2) and 6 g/L submicron Y2O3 yttria powder during 60...

(This article belongs to the Section Corrosion and Protection)

of 3