The process of thermocatalytic conversion of pine ethanol lignin in supercritical ethanol was studied over NiCu/SiO2 and NiCuMo/SiO2 catalysts bearing 8.8 and 11.7 wt.% of Mo. The structure and composition of ethanol lignin and the products of its th...
Noble metal-based catalysts are widely used to intensify the processes of reductive fractionation of lignocellulose biomass. In the present investigation, we proposed for the first time using the inexpensive NiCuMo/SiO2 catalyst to replace Ru-, Pt-,...
Achieving simultaneous enhancement of electrical conductivity and wear resistance in copper alloys remains challenging because conventional strengthening strategies often introduce additional electron-scattering sources and degrade electrical transpo...
In industrial production, flue gas heat exchangers are often affected by the low-temperature condensation of industrial flue gas due to the influence of the working environment, resulting in serious ash deposition and corrosion. In order to solve thi...
The problem of the deep elimination of antibiotics in environmental bodies is exceptionally warranted. In this work, a ternary nanocomposite of FeNi3/SiO2/CuS (FSC) was fabricated and then integrated with UV light irradiation and hydrogen peroxide as...
The reaction of ethanol with surface OH groups on ZrO2, CuO/ZrO2, CuO, Al2O3, Ga2O3, NiO, and SiO2 was studied by IR spectroscopy. The basicity of oxides was followed by CO2 adsorption, and their ability to oxidize was investigated by H2-TPR. It has...
The formation, structure, and thermal and magnetic properties of MFe2O4@SiO2 (M = Co, Mn, Zn, Ni, Cu) (60% MFe2O4/40% SiO2) nanocomposites produced by a modified sol-gel method, followed by annealing at 300, 600, 900 and 1200 °C, were studied. The th...
Nanosized spinel ferrites MFe2O4 (M = Mn, Co, Ni, Cu, Zn)-coated flaky FeSiAl alloy composites were synthesized successfully. Nano-ferrites preferentially grow into nanoplatelets due to induced or restricted growth on the flaky surface of FeSiAl. Wit...
Furfural (FAL), an important biomass-derived platform molecule, plays a vital role in bridging biorefineries and the production of high-value chemicals through its selective hydrogenation to furfuryl alcohol (FOL). In this work, a series of Cu-based...
Transfer hydrogenation (TH) is considered as one of the most promising ways to convert biomass into valuable products. This study aims to demonstrate the performance of high-loaded Ni-based catalysts in the TH of phenolic compounds such as guaiacol a...
The dry sliding wear behavior of the Al-12Si-CuNiMg matrix alloy and its composite reinforced with Al2O3 fibers was investigated using a pin-on-disk wear-testing machine. The volume fraction of Al2O3 fibers in the composite was 17 vol.%. Wear tests a...
This work reports the preparation and application of Fe2O3-SiO2-PAN nanocomposite for the removal of Cr3+, Cu2+, Al3+, Ba2+, Zn2+, Ni2+, Mn2+, Co2+, and Ti3+ from seawater. X-ray diffraction (XRD), scanning electron microscope/energy dispersive X-ray...
This paper presents the synthesis of metal doped Co ferrites, M0.2Co0.8Fe2O4 (M = Cu2+, Ni2+, and Zn2+) embedded in SiO2 matrix by an innovative sol-gel route. The structural and morphological characterization provided information about the crystalli...
A direct alkaline hydrothermal method was used to synthesize mono- and bimetallic Ni and Cu on mesoporous silica (m-SiO2) as catalysts for the hydrogenation of furfural (FAL) to cyclopentanone (CPO). The catalysts were characterized by XRD, FTIR, H2-...
In this paper, substituted anilines are industrially obtained by direct hydrogenation of nitroaromatic compounds with molecular H2 using metals as catalysts. Previous theoretical studies proposed that the mechanism of the reaction depends on the natu...
In this study, the barrier properties and diffusion behavior of carbon-doped Cu(Ni) alloy film were investigated. The films were fabricated using magnetron sputtering on a barrierless silicon substrate. X-ray diffraction patterns and electric resisti...
Catalytic behaviors of copper phosphide supported on various oxides (SiO2, γ-Al2O3, and USY zeolite) have been evaluated for deoxygenation of oleic acid and compared with nickel and cobalt phosphides. All catalysts were prepared by the hydrogen...
This study investigates the environmental significance of ciprofloxacin as an emerging contaminant and the need for effective degradation methods. The chemical coprecipitation method was used in this study to prepare the Zn-Cu-Ni composite silicate,...
Isopropyl alcohol (IPA) was synthesized via the acetone hydrogenation over silica-supported monometallic catalysts using Ni, Cu, Fe, Co, Ru, Rh, Pd, and Pt. The catalysts were characterized using X-ray diffraction (XRD), temperature-programmed reduct...
The performance of Ni-Cu/Al2O3 catalysts for steam reforming (SR) of gasoline to produce a hydrogen-rich gas mixture applied in a spark ignition (SI) engine was investigated at relatively low temperature. The structural and morphological features and...
As a high-temperature structural material, Ni3Al matrix composites are often used to manufacture basic mechanical components that need to be used in high-temperature conditions. To meet the increasing demand for metal matrix composites with an excell...
Proceeding our initial studies of compounds with formally dative TM→Si bonds (TM = Ni, Pd, Pt), which feature a paddlewheel arrangement of four (N,S) or (N,N) bridging ligands around the TM–Si axis, the current study shows that the (N,O)-b...
An efficient process was developed allowing the removal of metal ions from polycontaminated aqueous solutions by combining modified colloids and membranes. Firstly, filtration experiments were performed using polyethersulfone membranes modified by a...
The development of novel and active photocatalysts to industrialize photocatalysis technology is still a challenging task. In this work, a novel method is presented to prepare TiO2/SiO2 NSs by covering SiO2 nanospheres (NSs) with titanate-nanodiscs (...
Catalytic hydrotreatment is recognized as an efficient method to improve the properties of pyrolysis liquids (PO) to allow co-feeding with fossil fuels in conventional refinery units. The promising catalyst recipes identified so far are catalysts wit...
The development of non-noble metal catalysts provides a cost-effective and sustainable route for glucose oxidation to gluconic acid. In this study, a series of catalysts based on inexpensive transition metals (Cr, Cu, Ni, Fe) and/or Au were synthesiz...
Strontium and cobalt-free LaNi0.6Fe0.4O3–δ is considered one of the most promising electrodes for solid-state electrochemical devices. LaNi0.6Fe0.4O3–δ has high electrical conductivity, a suitable thermal expansion coefficient, satisfactory tolerance...
Due to the lower cost compared to screen-printed silver contacts, the Ni/Cu/Ag contacts formed by plating have been continuously studied as a potential metallization technology for solar cells. To address the adhesion issue of backside grid lines in...
Pyrometallurgical metal production results in side streams, such as dusts and slags, which are carriers of metals, though commonly containing lower metal concentrations compared to the main process stream. In order to improve the circular economy of...
Industrial production generates aerosols of complex composition, including an ultrafine fraction. This is typical for mining and metallurgical industries, welding processes, and the production and recycling of electronics, batteries, etc. Since nano-...
This research aimed to enhance biodiesel stability through catalytic transfer hydrogenation using a biomimetic bimetallic catalyst and glycerol as a hydrogen donor. The effects of catalyst species, intermediate solvent, glycerol feed, and glycerol fo...
Polymetallic nodules are promising resources for the extraction of valuable metals such as copper, nickel, and cobalt, as well as manganese alloys. To achieve efficient extraction of useful metals from the emerging resource, high-temperature carbothe...
Furfuryl alcohol represents a pivotal intermediate in the high-value utilization of renewable furfural, derived from agricultural residues. The industrial-scale hydrogenation of furfural to furfuryl alcohol typically employs Cu-based catalysts, but t...
Carbon solid solubility in metals is an important factor affecting uniform graphene growth by chemical vapor deposition (CVD) at high temperatures. At low temperatures, however, it was found that the carbon diffusion rate (CDR) on the metal catalyst...
The metal-based/ceramic interface structure is a key research focus in science, and addressing the stability of the interface has significant scientific importance as well as economic value. In this project, the work of adhesion, heat of segregation,...
Corrosion behavior of 60Si2Mn-A and 60Si2Mn-B in simulated industrial atmospheric environment was investigated by alternate immersion corrosion test and electrochemical method. The phase, morphology, characteristics of corrosion products, and the dis...
Previous studies have shown that fats, oils, and greases (FOG) can be deoxygenated to fuel-like hydrocarbons over inexpensive alumina-supported Ni catalysts promoted with Cu or Fe to afford excellent yields of renewable diesel (RD). In this study, su...
X-ray fluorescence analysis was applied to assess the ecological state of the area potentially polluted by emissions of the aluminum industry and heat power engineering. Soil and pine needle samples were collected in areas with industrial activity an...
Surface-enhanced Raman scattering (SERS) spectroscopy is used to investigate a composition of wash swabs from the Cu-TiO2/TiO2-modified filters with disinfecting ability. Macroporous Si chips coated with conformal 800 nm thick Ni layer and Ag particl...
Cu and Cr are the essential alloying elements for low-Ni stainless steels. An effective and economical method has been developed for the direct production of Cu-Cr-Fe master alloys through the synergistic reduction of chromite and copper smelting sla...
The exploitation of iron ore could cause heavy metals pollution in the soils, which threatens the ecosystem and human health. In this study, soil, stream sediment, tailings, rock, and atmospheric deposition samples were collected from an iron mine in...
With the rapid development of modern society, the consumption of fossil fuels during the industrial production process produces a significant amount of carcinogens. Converting the highly toxic biphenyl (BP) to the valuable product cyclohexylbenzene (...
Highly developed countries generate large volumes of industrial waste, the type and quantity of which are strongly linked to the characteristics of the industries that produce it. Industrial waste can adversely affect the environment, so its disposal...
Co-combustion in a refuse incinerator is a primary method for treating aged refuse (AR). Given the high contents of heavy metals and chlorine in AR, it is crucial to investigate their release and fate during co-combustion to achieve environmentally s...
A series of NiM/SiO2 (M = Ce, Co, Cu, Fe, Sn, Zr, Mo) catalysts are prepared and used in the selective hydrodeoxygenation (HDO) of aliphatic acid to produce alkanes with the same number of carbon atoms as the reactant (alkane-Cx). The results indicat...
The catalysts employed in catalytic reactors greatly affect the reaction efficiency of the reaction system and the reactor’s performance. This work presents a rapid comparative study on three kinds of Fe-based materials integrated into an optof...
To determine slag properties and the factors influencing these properties for optimization of operating conditions in the copper flash smelting process, the composition and microstructures of the quenched smelting and converting slags have been analy...
This research investigated the volatilization and enrichment of metallic and non-metallic elements in municipal solid waste incineration fly ash during thermal treatment. The high-temperature treatment resulted in both the volatilization and stabiliz...
In this paper, the dependences of the morphology, particle sizes, and compositions of the condensed combustion products (CCP) of modified double-base propellants (1,3,5-trimethylenetrinitramine (RDX) as oxidizer) on the chamber pressure (<35 MPa)...
8 October 2022
To determine the nature and origin of the unconsolidated bottom sediments, as well as to demonstrate and quantify the presence of Presumably Contaminating Elements (PCE) in the Serbian Danube River, as a novelty, the mass fractions on nine major elem...
of 3