Axial flux machines have positive sides on the power and torque density profile. However, the price of this profile is paid by the torque ripples and irregular magnetic flux density production. To gather higher efficiency, torque ripples should close...
This study focused on the design optimization of permanent magnet synchronous linear motors (PMSLM) that are applied in microsecond laser cutting machines. A new design optimization method was introduced to enhance PMSLM performances in terms of moto...
Double stator cylindrical linear oscillating generators (DSCLOGs) have been widely used in renewable energy power generation systems due to their higher power density, higher reliability, and low-noise characteristics. However, the detent force of a...
In this paper, a three-dimensional finite element analysis (3D-FEA) model for shear horizontal surface acoustic wave (SH-SAW) torque sensors is presented. Torque sensors play a significant role in various fields to ensure a reliable torque transmissi...
The long-term success and predictability of implant-supported restorations largely depends on the biomechanical forces (stresses) acting on implants and the surrounding alveolar bone in the mandible. The aim of our study was to investigate the biomec...
Objectives: To study the effects of internal and marginal polymerization shrinkage stress and distribution in different resin composite class III dental restorations in relation to the restorative technique using numerical finite element analysis (FE...
This article focuses on increasing the computational efficiency of 3D multi-static magnetic finite element analysis (FEA) for electrical machines (EMs), which have a magnetic field evolving in 3D space. Although 3D FEA is crucial for analyzing these...
The goal of this study was to evaluate the stress distribution in an endocrown restoration according to different provisional restorative materials. An endodontically treated maxillary molar model was selected for conducting the finite element analys...
The present investigation evaluated the effect of the combination of different dental filling materials in Class I cavities under occlusal loading using three-dimensional finite elements analysis (FEA). Six computer-generated and restored models of a...
The aim of the present study was to investigate the effect of shrinking and no shrinking dental filling materials combination in posterior restorations under the combined effects of polymerization shrinkage and occlusal load by means of 3D Finite Ele...
Background: Orofacial injuries are common occurrences during contact sports activities. However, there is an absence of data regarding the performance of hybrid occlusal splint mouthguards (HMG), especially during compressive loading. This study amid...
Over the past decade, the demand for three-dimensional (3D) patient-specific (PS) modelling and simulations has increased considerably; they are now widely available and generally accepted as part of patient care. However, the patient specificity of...
Mouthguards (MG) are protective devices that can reduce the risks of facial trauma. However, many athletes do not use them. Additionally, MG wear with coincidental parafunctional activity has not been considered. The aim of this study was to evaluate...
This paper aims to assess experimentally the mechanical and tribological behavior of conventional and functionally graded (FG) polymeric matrix composites reinforced with continuous glass fibers. The small punch test (SPT) and a pin-on-disc device we...
The aim of this in vitro study is to evaluate the stress distribution of different definitive restorative materials designed with different connector dimensions using finite element analysis. Two adjacent prepared maxillary molars were designed digit...
Articular cartilage morphology and composition are essential factors in joint biomechanics, and their alteration is a crucial aspect of osteoarthritis (OA), a prevalent disease that causes pain and functional loss. This research focuses on developing...
5 June 2020
The current study aimed to evaluate the mechanical behavior of two different maxillary prosthetic rehabilitations according to the framework design using the Finite Element Analysis. An implant-supported full-arch fixed dental prosthesis was develope...
In this article, we propose a new numerical approach, abbreviated as Cos-SDA, for analyzing flexural deformation problems of geomaterials. The Cos-SDA is achieved by implanting the strong discontinuity approach (SDA) into the computational framework...
The mechanical properties of woven jute fiber-reinforced PLA polymer laminates additively manufactured through Laminated Object Manufacturing (LOM) technology are simulated using the finite element method in this work. Woven jute fiber reinforcements...
The instability in rare-earth material supply and rising costs have driven research into rare-earth-free electric motors. Among various alternatives, wound rotor synchronous motors (WRSMs) stand out due to their adjustable excitation, enabling high t...
The aim of this study was to determine the mechanical implications of four-unit fixed dental prostheses (FDPs) made of (1) monolithic zirconium dioxide (ZR O2), (2) polymethylmethacrylate (PMMA), (3) metal ceramic (PFM) and (4) impression resin (3DPP...
The aim of this study was to evaluate the effect of biologically oriented preparation technique on the stress concentration of endodontically treated upper central incisors restored with zirconia crown (yttria-stabilized zirconia polycrystalline cera...
In this paper, an analytical model is proposed to analyze and predict the characteristics of a double stator linear and rotary permanent magnet machine (DSLRPMM). In order to simplify the magnetic field calculation, the DSLRPMM is cut along the axial...
Cultural heritage’s structural changes and damages can influence the mechanical behaviour of artefacts and buildings. The use of finite element methods (FEM) for mechanical analysis is largely used in modelling stress behaviour. The workflow in...
This research investigated the feasibility of 3D-printed external fixator (EF) rings made from carbon fiber reinforced polyamide 6 (PA6-CF) as an alternative to the conventional metallic counterpart. The study integrated tensile testing with digital...
In this article, we propose an equivalent 2-D finite element analysis (FEA) process considering the 3-D flux of an outer rotor permanent magnet synchronous motor (PMSM). In the motor, 3-D flux such as axial leakage flux (ALF) and overhang fringing fl...
A novel spherical two-degree-of-freedom (2-DOF) hybrid stepping motor is proposed in this paper, which has a simple and compact mechanical structure and is easy to manufacture, assemble, control and apply. The motor is composed of two sub-motors, eac...
Reducing iron loss in axial flux permanent magnet (AFPM) motors is critical for improving efficiency. This study proposes a design-optimization procedure that combines 3D finite-element analysis (FEA) data with an artificial neural network (ANN) surr...
This paper pays attention to magnetic flux linkage optimization of a direct-driven surface-mounted permanent magnet synchronous generator (D-SPMSG). A new compact representation of the D-SPMSG nonlinear dynamic differential equations to reduce system...
This paper presents three methods of converting complex 3D models of STL type into solid models. For converting the STL models, specific approximation functions from CATIA and Creo Parametric software were used as well as 3D solid modeling methods th...
Primary dentition is crucial in influencing the emergence of permanent teeth. Premature primary tooth loss can result in undesired tooth motions and space loss in the permanent dentition. Typically, fixed or removable dental appliances are adopted to...
Tooth loss and bone resorption of the alveolar cavity caused by dental caries and periodontal disease remain major clinical challenges that compromise oral function. Tissue engineering approaches based on biocompatible scaffolds have emerged as promi...
The treatment of Paprosky Type III acetabular defects is a significant challenge in orthopedic surgery, as standard components often do not fit properly. This study aims to evaluate the biomechanical efficacy of a custom 3D-printed PEEK acetabular pr...
Proper documentation is fundamental to providing structural health monitoring, damage identification and failure assessment for Cultural Heritage (CH). Three-dimensional models from photogrammetric and laser scanning surveys usually provide 3D point...
This paper deals with design of permanent magnet synchronous generators (PMSG) for diesel engine generators. The PMSG is required to reduce the total harmonic distortion (THD) reduction of the induced electromotive force (EMF) for the enhancement of...
The mechanical properties of Fused Filament Fabrication (FFF) 3D printed specimens of acrylonitrile butadiene styrene (ABS), ABS reinforced with carbon fibers (ABS/CFs) and ABS reinforced with carbon nanotubes (ABS/CNTs) are investigated in this pape...
This paper presents a study of penetrating a pin into a magnetorheological fluid (MR) cushion focused on the force measurement. The research is supported by detailed finite element analysis (FEA) of the magnetic field distributions in several magneti...
Effective sound absorption is crucial in environments like schools and hospitals. This study evaluates open-pore polyurethane foam and perforated onyx panels, which attenuate noise via distinct mechanisms: porous materials convert sound energy to hea...
A number of mixed and displacement-based zig-zag theories are derived from the zig-zag adaptive theory (ZZA). As a consequence of their different assumptions on displacement, strain, and stress fields, and layerwise functions, these theories account...
Three-dimensional (3D) printing has transformed the development of microneedle arrays (MNAs) by enabling exceptional control over their geometry, distribution, materials, and functionality in a single-step, customizable process. This review represent...
In this paper we describe the potentialities of a tool for the visualization of experimental results directly on a three-dimensional model. The case study concerns the visualization of the results of a dynamic finite element analysis (FEA/FEM) applie...
This study focused on characteristic cases of recently tested real-scale RC framed wall infilled structures with innovative seismic protection through polyurethane joints (PUFJ) or polyurethane-impregnated fiber grids (FRPU). The frames revealed a hi...
Background/Objectives: One of the most serious complications following implant placement in the atrophic posterior mandible is injury to the inferior alveolar nerve (IAN), which can also happen during occlusal loading of the implants. This study inve...
In this paper, the transient state analysis of a Line-Start Permanent Magnet Synchronous Motor (LSPMSM) and the optimum design for high efficiency were studied. In the case of an LSPMSM, aluminum bars and permanent magnets are inserted in the rotor....
This study investigates the mechanical performance of two prosthetic forelimb designs for dogs—one with a solid structure and the other with a perforated structure—using Finite Element Analysis (FEA). Both models were analyzed under stati...
Electric machines with high torque density are needed in many applications, such as electric vehicles, electric robotics, electric ships, electric aircraft, etc. and they can avoid planetary gears thus reducing manufacturing costs. This paper present...
Nowadays, seismic codes are regularly updated with new knowledge and a better understanding of the earthquake phenomenon. With these updates, existing buildings require a reevaluation of their stability and a process of reinforcement and/or retrofitt...
Conventional stator–magnet moving−iron transverse−flux linear oscillatory machines (CSMTLOMs) are widely applied in directly−drive reciprocating devices due to the merits of easy fabrication and robust mover. However, in order...
The main objective of this study was to investigate the mechanical behavior of 3D printed fiberglass-reinforced nylon honeycomb structures. A Continuous Fiber Fabrication (CFF) 3D printer was used since it makes it possible to lay continuous strands...
This paper introduces a novel approach to assessing structural safety, specifically aimed at evaluating the safety of existing structures. Firstly, a point cloud model of the existing commercial complex was captured utilizing three-dimensional (3D) l...
of 13