Skip to Content

242 Results Found

  • Communication
  • Open Access
15 Citations
4,087 Views
15 Pages

Simulation Informed CAD for 3D Nanoprinting

  • Jason D. Fowlkes,
  • Robert Winkler,
  • Eva Mutunga,
  • Philip D. Rack and
  • Harald Plank

18 December 2019

A promising 3D nanoprinting method, used to deposit nanoscale mesh style objects, is prone to non-linear distortions which limits the complexity and variety of deposit geometries. The method, focused electron beam-induced deposition (FEBID), uses a n...

(This article belongs to the Special Issue Multi-Dimensional Direct-Write Nanofabrication )
  • Article
  • Open Access
3,266 Views
13 Pages

LaserCAD—A Novel Parametric, Python-Based Optical Design Software

  • Clemens Anschütz,
  • Joachim Hein,
  • He Zhuang and
  • Malte C. Kaluza

8 November 2025

In this article, we present LaserCAD, an open-source, script-based software toolkit for the design and visualization of optical setups based on parametric ray tracing. Unlike conventional commercial tools, which focus on complex lens optimization and...

(This article belongs to the Section Optics and Lasers)
  • Article
  • Open Access
33 Citations
4,719 Views
21 Pages

Application of 3D Scanning, Computer Simulations and Virtual Reality in the Redesigning Process of Selected Areas of Underground Transportation Routes in Coal Mining Industry

  • Magdalena Rozmus,
  • Jarosław Tokarczyk,
  • Dariusz Michalak,
  • Marek Dudek and ,
  • Kamil Szewerda,
  • Marek Rotkegel,
  • Aleš Lamot and
  • Janez Rošer
  • + 3 authors+ 0 author

1 May 2021

Nowadays designing of selected areas of mines underground workings can be effectively improved by the application of computer techniques: 3D scanning, computer simulations and Virtual Reality. This, in fact, would result in the more reliable design p...

(This article belongs to the Special Issue The IMTech 2021 Innovative Mining Technologies)
  • Article
  • Open Access
1 Citations
2,185 Views
22 Pages

Mechanical Anisotropy and Fatigue Behavior of 3D-Printed Dentures: A Comparison with CAD/CAM Milled Bases After Thermomechanical Aging

  • Mohamed Ahmed Alkhodary,
  • Ramy Elmoazen,
  • Bandar Awadh Alresheedi,
  • Ali Alenezi and ,
  • Naji Alharethi and
  • Rawan Alrethia
  • + 1 author+ 0 author

To investigate the effect of print orientation (0°, 45°, and 90°) and artificial aging on flexural strength and fatigue resistance of 3D-printed denture bases compared to CAD/CAM milled controls, we fabricated 320 maxillary complete dentures, divided...

(This article belongs to the Section Dental Biomaterials)
  • Article
  • Open Access
16 Citations
24 Views

The paper presents part of a comprehensive and complex investigation in the field of computer design and 3D garment simulation within which it investigates developed computer-based parametric prototype of a men's suit and whether it is suitable for c...

  • Article
  • Open Access
6 Citations
4,093 Views
14 Pages

An Innovative and Cost-Advantage CAD Solution for Cubitus Varus Surgical Planning in Children

  • Leonardo Frizziero,
  • Gian Maria Santi,
  • Christian Leon-Cardenas,
  • Giampiero Donnici and ,
  • Alfredo Liverani,
  • Francesca Napolitano,
  • Paola Papaleo,
  • Curzio Pagliari,
  • Diego Antonioli and
  • Paola Zarantonello
  • + 8 authors+ 3 authors

29 April 2021

The study of CAD (computer aided design) modeling, design and manufacturing techniques has undergone a rapid growth over the past decades. In medicine, this development mainly concerned the dental and maxillofacial sectors. Significant progress has a...

  • Article
  • Open Access
8 Citations
6,570 Views
20 Pages

The Effect of Manufacturing Quality on Rocket Precision

  • Zvonko Trzun,
  • Milan Vrdoljak and
  • Hrvoje Cajner

The effect of manufacturing quality on rocket impact point dispersion is analyzed. The approach presented here applies to any type of rocket. Here, manufacturing quality is demonstrated for the unguided rocket, and by simulating four typical manufact...

  • Article
  • Open Access
26 Citations
5,930 Views
14 Pages

In-House, Fast FDM Prototyping of a Custom Cutting Guide for a Lower-Risk Pediatric Femoral Osteotomy

  • Leonardo Frizziero,
  • Gian Maria Santi,
  • Christian Leon-Cardenas,
  • Giampiero Donnici and ,
  • Alfredo Liverani,
  • Paola Papaleo,
  • Francesca Napolitano,
  • Curzio Pagliari,
  • Giovanni Luigi Di Gennaro and
  • Paola Zarantonello
  • + 8 authors+ 3 authors

Three-dimensional printed custom cutting guides (CCGs) are becoming more and more investigated in medical literature, as a patient-specific approach is often desired and very much needed in today’s surgical practice. Three-dimensional printing applic...

  • Review
  • Open Access
2 Citations
3,374 Views
48 Pages

25 January 2026

Reverse engineering (RE) has been increasingly adopted in metal manufacturing to digitize legacy parts, connect “as-is” geometry to mechanical performance, and enable agile repair and remanufacturing. This review consolidates scan-to-simu...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
4 Citations
3,051 Views
16 Pages

20 November 2024

The increasing adoption of 2D/3D laser line sensors in industrial and research applications necessitates accurate and efficient simulation tools for tasks such as surface inspection, dimensional verification, and quality control. This paper presents...

(This article belongs to the Special Issue Advances in Optical Sensing, Instrumentation and Systems: 2nd Edition)
  • Article
  • Open Access
17 Citations
4,930 Views
24 Pages

Comparison of CAD and Voxel-Based Modelling Methodologies for the Mechanical Simulation of Extrusion-Based 3D Printed Scaffolds

  • Gisela Vega,
  • Rubén Paz,
  • Andrew Gleadall,
  • Mario Monzón and
  • María Elena Alemán-Domínguez

29 September 2021

Porous structures are of great importance in tissue engineering. Most scaffolds are 3D printed, but there is no single methodology to model these printed parts and to apply finite element analysis to estimate their mechanical behaviour. In this work,...

(This article belongs to the Special Issue Design and Application of Additive Manufacturing)
  • Article
  • Open Access
3 Citations
3,399 Views
22 Pages

Background: Decompressive craniectomy (DC) can be used to augment intracranial space and halt brainstem compromise. However, a widely adopted recommendation for optimal surgical extent of the DC procedure is lacking. In the current study, we utilized...

  • Article
  • Open Access
374 Views
17 Pages

3 September 2026

A central challenge in implantable local-delivery systems is to determine how internal device architecture shapes solute transport before drug-specific loading, release, and biological validation are available. This study examines the reservoir&ndash...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
4 Citations
5,608 Views
47 Pages

12 November 2025

This work presents the structural analysis and validation of a sub-250 g FPV drone chassis, emphasizing both theoretical rigor and practical applicability. The novelty of this contribution lies in four complementary aspects. First, the structural phi...

(This article belongs to the Special Issue The Conceptual Design Methodology for UAV: New Research and New Development)
  • Article
  • Open Access
2,305 Views
22 Pages

Proposed Shaft Coupling Based on RPRRR Mechanism: Positional Analysis and Consequences

  • Stelian Alaci,
  • Ioan Doroftei,
  • Florina-Carmen Ciornei,
  • Ionut-Cristian Romanu and ,
  • Toma-Marian Ciocirlan and
  • Mariana-Catalina Ciornei
  • + 1 author+ 0 author

20 July 2023

This study proposes a solution for the transmission of rotation motion between two shafts with crossed directions. For constructive simplicity, the solutions including the planar pair were preferred and, from the two variants, namely structurally sym...

(This article belongs to the Special Issue Applied Mathematics and Information Sciences)
  • Article
  • Open Access
16 Citations
10,222 Views
11 Pages

Delayed Reconstruction of Palatomaxillary Defect Using Fibula Free Flap

  • Soo-Hwan Byun,
  • Ho-Kyung Lim,
  • Byoung-Eun Yang,
  • Soung-Min Kim and
  • Jong-Ho Lee

24 March 2020

Introduction. The objective of this study was to evaluate a surgical technique and to present the results of delayed reconstruction of palatomaxillary defects using fibula free flap (FFF). Methods. A review was conducted for nine patients who underwe...

(This article belongs to the Special Issue Innovation in Head and Neck Reconstructive Surgery)
  • Article
  • Open Access
6 Citations
3,658 Views
20 Pages

Optical Raytracing Analysis of a Scheffler Type Concentrator

  • Daniela Fontani,
  • Paola Sansoni,
  • Franco Francini,
  • Francesco Toni and
  • David Jafrancesco

31 December 2021

The Scheffler type concentrator is a curved metal reflector particularly suitable for solar thermal systems with a receiver fixed to the ground. Its operating principle is to deform the reflector throughout the year to optimize its performance in col...

(This article belongs to the Special Issue Modeling, Design, Development and Testing for Solar System)
  • Article
  • Open Access
5 Citations
4,088 Views
21 Pages

Effectiveness Assessment of CAD Simulation in Complex Orthopedic Surgery Practices

  • Leonardo Frizziero,
  • Curzio Pagliari,
  • Giampiero Donnici,
  • Alfredo Liverani and ,
  • Gian Maria Santi,
  • Paola Papaleo,
  • Francesca Napolitano,
  • Christian Leon-Cardenas,
  • Giovanni Trisolino and
  • Stefano Stallone
  • + 8 authors+ 3 authors

11 May 2021

This experimental study defines the usage of a computer-aided surgical simulation process that is effective, safe, user-friendly, and low-cost, that achieves a detailed and realistic representation of the anatomical region of interest. The chosen too...

(This article belongs to the Special Issue Symmetry in Engineering Sciences Ⅲ)
  • Article
  • Open Access
695 Views
17 Pages

Design and Validation of a Novel Modular High-Fidelity Simulator for Pediatric Percutaneous Tracheotomy Using the Frova Screw Technique

  • Gaia Vannetti,
  • Marta Mencarelli,
  • Margherita Brogi,
  • Luca Puggelli and ,
  • Roberto Baggi,
  • Stefano Avenali,
  • Marco Di Mitri,
  • Yary Volpe and
  • Paola Serio
  • + 4 authors+ 0 author

6 May 2026

Percutaneous tracheotomy represents a critical airway procedure, yet training opportunities in pediatric patients remain limited due to the low incidence and high risk associated with the procedure. Simulation-based training plays a key role in enabl...

(This article belongs to the Special Issue Mechanical Design and Modeling for Medical Devices and Simulators)
  • Article
  • Open Access
1 Citations
1,251 Views
20 Pages

Development of Micro-CT-Based Anatomically Accurate Tooth Model for Finite Element Analysis of Composite Restorations

  • Tamás Tarjányi,
  • Balázs Szabó,
  • Lívia Vásárhelyi,
  • Tibor Nagy and ,
  • Ferenc Farkas and
  • Attila Nagy
  • + 1 author+ 0 author

8 May 2026

Background: Finite element analysis (FEA) has become an important tool in restorative dentistry for investigating stress distribution in teeth and dental restorations. However, the accuracy of such analyses strongly depends on the anatomical fidelity...

(This article belongs to the Special Issue The Digital Dentistry Revolution: Precision from Diagnosis to Delivery)
  • Proceeding Paper
  • Open Access
767 Views
11 Pages

Advanced Vibroacoustic Simulations Using Isogeometric Analysis

  • Tommaso Landi,
  • Christophe Hoareau,
  • Jean-François Deü,
  • Roger Ohayon and
  • Roberto Citarella

This work presents a methodology for integrating Computer-Aided Design (CAD), specifically using Rhinoceros 6, with Isogeometric Analysis (IGA) for vibroacoustic simulations. Since CAD models typically provide only boundary representations, the 3D do...

(This article belongs to the Proceedings of The 54th Conference of the Italian Scientific Society of Mechanical Engineering Design (AIAS 2025))
  • Article
  • Open Access
6 Citations
2,236 Views
12 Pages

Computer-Aided Decision Support and 3D Models in Pancreatic Cancer Surgery: A Pilot Study

  • Diederik W. M. Rasenberg,
  • Mark Ramaekers,
  • Igor Jacobs,
  • Jon R. Pluyter and ,
  • Luc J. F. Geurts,
  • Bin Yu,
  • John C. P. van der Ven,
  • Joost Nederend,
  • Ignace H. J. T. de Hingh and
  • Misha D. P. Luyer
  • + 20 authors+ 15 authors

26 February 2025

Background: Preoperative planning of patients diagnosed with pancreatic head cancer is difficult and requires specific expertise. This pilot study assesses the added value of three-dimensional (3D) patient models and computer-aided detection (CAD) al...

(This article belongs to the Section Gastroenterology & Hepatopancreatobiliary Medicine)
  • Proceeding Paper
  • Open Access
1 Citations
1,685 Views
10 Pages

7 February 2025

This paper presents an integrated CAD/CAM system that can be used for Computer Aided Process Planning to interact or automate 3D/4D/5D printing process towards Industry 5.0. By creating a new algorithm, macro is developed that has the capability to d...

(This article belongs to the Proceedings of The 8th Mechanical Engineering, Science and Technology International Conference)
  • Article
  • Open Access
16 Citations
4,148 Views
15 Pages

Analysis of Polygonal Computer Model Parameters and Influence on Fabric Drape Simulation

  • Slavenka Petrak,
  • Maja Mahnić Naglić,
  • Dubravko Rogale and
  • Jelka Geršak

21 October 2021

Contemporary CAD systems enable 3D clothing simulation for the purpose of predicting the appearance and behavior of conventional and intelligent clothing in real conditions. The physical and mechanical properties of the fabric and the simulation para...

(This article belongs to the Special Issue Advanced Materials for Clothing and Textile Engineering)
  • Article
  • Open Access
5 Citations
1,525 Views
23 Pages

Enhancing 3D Printing of Gelatin/Siloxane-Based Cellular Scaffolds Using a Computational Model

  • Marcos B. Valenzuela-Reyes,
  • Esmeralda S. Zuñiga-Aguilar,
  • Christian Chapa-González,
  • Javier S. Castro-Carmona and ,
  • Luis C. Méndez-González,
  • R. Álvarez-López,
  • Humberto Monreal-Romero and
  • Carlos A. Martínez-Pérez
  • + 3 authors+ 0 author

30 June 2025

In recent years, there has been a surge in the extrusion-based 3D printing of materials for various biomedical applications. This work presents a novel methodology for optimizing extrusion-based 3D bioprinting of a gelatin/siloxane hybrid material fo...

(This article belongs to the Special Issue Designing Polymers for Emerging Applications)
  • Article
  • Open Access
2 Citations
1,063 Views
22 Pages

20 November 2025

Ions released from denture base resins under oral conditions may affect biocompatibility and material stability, particularly at low pH. This study quantified inorganic ion release from three denture base resins—conventional heat-cured PMMA, pr...

(This article belongs to the Special Issue Advanced Dental Materials and Its Applications)
  • Article
  • Open Access
3 Citations
2,105 Views
12 Pages

Surface Analysis of Lithium Disilicate Ceramics After Use of Charcoal-Containing Toothpastes

  • Franciele Floriani,
  • Bayaan Jabr,
  • Silvia Rojas-Rueda,
  • Rene Garcia-Contreras and ,
  • Carlos A. Jurado and
  • Abdulrahman Alshabib
  • + 1 author+ 0 author

Background: This study evaluated the effect of charcoal-containing toothpaste on the surface roughness of CAD/CAM lithium disilicate ceramic (e.max CAD) after simulated toothbrushing. Methods: Forty-eight e.max CAD ceramic specimens were divided into...

(This article belongs to the Special Issue Surface Analyses, Physicochemical and Mechanical Properties of Dental Biomaterials (2nd Edition))
  • Article
  • Open Access
3 Citations
1,499 Views
13 Pages

Exploring 3D Roadway Modeling Techniques Using CAD and Unity3D

  • Yingbing Yang,
  • Yunchuan Sun and
  • Yuhong Wang

28 July 2025

To tackle the inefficiencies in 3D mine tunnel modeling and the tedious task of drawing centerlines, this study introduces a faster method for generating centerlines using CAD secondary development. Starting with the tunnel centerline, the research t...

(This article belongs to the Special Issue Oil and Gas Well Engineering: Experimental and Numerical Investigation)
  • Article
  • Open Access
166 Views
16 Pages

15 October 2026

Background/Objectives: This in vitro study evaluated the effects of manufacturing technologies and finishing protocols on the color stability (ΔE00) and surface roughness (Ra) of five interim restorative materials after simulated toothbrushing....

(This article belongs to the Section Surface Coatings for Biomedicine and Bioengineering)
  • Article
  • Open Access
8 Citations
3,244 Views
13 Pages

Effect of the CAD/CAM Milling Protocol on the Fracture Behavior of Zirconia Monolithic Crowns

  • Andressa Restani Oliveira,
  • Natalia Ulmi Ziglioli,
  • Susana M. Salazar Marocho,
  • Julian Satterthwaite and
  • Marcia Borba

18 June 2024

Although advancements in CAD/CAM technology allow for more personalized treatments, it is not clear how modifications in the CAD/CAM milling process could affect the restoration surface conditions and their mechanical behavior. The objective of this...

(This article belongs to the Section Biomaterials)
  • Article
  • Open Access
11 Citations
8,021 Views
26 Pages

23 July 2024

Solar radiation impacts diverse aspects of city life, such as harvesting energy with PV panels, passive heating of buildings in winter, cooling the loads of air-conditioning systems in summer, and the urban microclimate. Urban digital twins and 3D ci...

(This article belongs to the Section Urban Remote Sensing)
  • Article
  • Open Access
5 Citations
2,963 Views
8 Pages

Marginal and Internal Precision of Zirconia Four-Unit Fixed Partial Denture Frameworks Produced Using Four Milling Systems

  • Karl Martin Lehmann,
  • Michael Weyhrauch,
  • Monika Bjelopavlovic,
  • Herbert Scheller and ,
  • Henning Staedt,
  • Peter Ottl,
  • Peer W. Kaemmerer and
  • Stefan Wentaschek
  • + 3 authors+ 0 author

19 May 2021

Background: CAD/CAM systems enable the production of fixed partial dentures with small and reproducible internal and marginal gaps. Purpose: The purpose of this study was to evaluate the reproducibility of the marginal and internal adaptations of fou...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
6 Citations
4,144 Views
22 Pages

6 January 2023

The elevation of Synthetic Biology from single cells to multicellular simulations would be a significant scale-up. The spatiotemporal behavior of cellular populations has the potential to be prototyped in silico for computer assisted design through e...

(This article belongs to the Special Issue Selected Papers from the 9th International Work-Conference on Bioinformatics and Biomedical Engineering (IWBBIO 2022))
  • Article
  • Open Access
10 Citations
4,890 Views
22 Pages

CAD/CAM System for Additive Manufacturing with a Robust and Efficient Topology Optimization Algorithm Based on the Function Representation

  • Dmitry Popov,
  • Yulia Kuzminova,
  • Evgenii Maltsev,
  • Stanislav Evlashin and ,
  • Alexander Safonov,
  • Iskander Akhatov and
  • Alexander Pasko
  • + 2 authors+ 0 author

12 August 2021

Additive manufacturing erases the distance between design ideas and finished parts. However, designers must use several software tools to use these advantages. Moreover, these tools operate with different representations of geometry. This paper descr...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
20 Citations
6,329 Views
20 Pages

1 March 2022

Polyetheretherketone (PEEK) is a unique polymer material which has recently been introduced to dentistry. This study aimed to assess the structural integrity of PEEK as a posterior tooth crown and compared it with ceramic-based material. A total of 3...

(This article belongs to the Special Issue Polymeric Materials for Dental Applications II)
  • Article
  • Open Access
4 Citations
4,047 Views
26 Pages

Performance Analysis of Localization Algorithms for Inspections in 2D and 3D Unstructured Environments Using 3D Laser Sensors and UAVs

  • Paul Espinosa Peralta,
  • Marco Andrés Luna,
  • Paloma de la Puente,
  • Pascual Campoy and ,
  • Hriday Bavle,
  • Adrián Carrio and
  • Christyan Cruz Ulloa
  • + 2 authors+ 0 author

7 July 2022

One of the most relevant problems related to Unmanned Aerial Vehicle’s (UAV) autonomous navigation for industrial inspection is localization or pose estimation relative to significant elements of the environment. This paper analyzes two differe...

(This article belongs to the Special Issue Aerial Robotics: Navigation and Path Planning)
  • Article
  • Open Access
5 Citations
6,855 Views
26 Pages

Blitz Vision: Development of a New Full-Electric Sports Sedan Using QFD, SDE and Virtual Prototyping

  • Leonardo Frizziero,
  • Ludovico Galletti,
  • Lorenzo Magnani,
  • Edoardo Gaetano Meazza and
  • Marco Freddi

In this paper, industrial design structure (IDeS) is applied for the development of two new full-electric sports sedan car proposals that go by the names Blitz Vision AS and Retro. With a deep analysis of the trends dominating the automotive industry...

(This article belongs to the Collection Feature Innovation Papers)
  • Article
  • Open Access
1 Citations
1,608 Views
22 Pages

Background: This study aimed to investigate the biomechanical behavior of conservative inlay restorations fabricated from different CAD/CAM materials by combining experimental flexural strength testing with finite element analysis. Methods: Five CAD/...

(This article belongs to the Section Biomaterials and Devices for Healthcare Applications)
  • Article
  • Open Access
13 Citations
6,121 Views
12 Pages

Comparing the Repair of Veneered Zirconia Crowns with Ceramic or Composite Resin: An in Vitro Study

  • Hattanas Kumchai,
  • Patrapan Juntavee,
  • Arthur F. Sun and
  • Dan Nathanson

27 April 2020

Statement of problem: Current techniques for repairing porcelain-chipped restorations have several limitations. With advances in CAD/CAM technology, the combination of resin cements and high-strength ceramic materials might offer new options for repa...

(This article belongs to the Section Dental Materials)
  • Article
  • Open Access
23 Citations
6,864 Views
14 Pages

CAD-Based Automated Design of FEA-Ready Cutting Tools

  • Anastasios Tzotzis,
  • César García-Hernández,
  • José-Luis Huertas-Talón and
  • Panagiotis Kyratsis

The resources of modern Finite Element Analysis (FEA) software provide engineers with powerful mechanisms that can be used to investigate numerous machining processes with satisfying results. Nevertheless, the success of a simulation, especially in t...

  • Article
  • Open Access
54 Views
18 Pages

9 November 2026

This study evaluated cellular responses to extracts of CAD/CAM-milled PMMA, 3D-printed methacrylate-based resin, and conventionally heat-polymerized PMMA after denture cleanser exposure. Specimens (MTT, n = 240; BrdU, n = 36) were assigned to Corega,...

(This article belongs to the Topic 3D Printing Materials: An Option for Sustainability)
  • Article
  • Open Access
3 Citations
3,550 Views
16 Pages

Object Pose Detection to Enable 3D Interaction from 2D Equirectangular Images in Mixed Reality Educational Settings

  • Matteo Zanetti,
  • Alessandro Luchetti,
  • Sharad Maheshwari,
  • Denis Kalkofen and ,
  • Manuel Labrador Ortega and
  • Mariolino De Cecco
  • + 1 author+ 0 author

24 May 2022

In this paper, we address the challenge of estimating the 6DoF pose of objects in 2D equirectangular images. This solution allows the transition to the objects’ 3D model from their current pose. In particular, it finds application in the educat...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
29 Citations
3,702 Views
24 Pages

3D Reality-Based Survey and Retopology for Structural Analysis of Cultural Heritage

  • Sara Gonizzi Barsanti,
  • Mario Guagliano and
  • Adriana Rossi

7 December 2022

Cultural heritage’s structural changes and damages can influence the mechanical behaviour of artefacts and buildings. The use of finite element methods (FEM) for mechanical analysis is largely used in modelling stress behaviour. The workflow in...

(This article belongs to the Special Issue Intelligent Point Cloud Processing, Sensing and Understanding)
  • Article
  • Open Access
1 Citations
1,966 Views
14 Pages

Polymer Prosthetic Hand with Finger Copies for Persons with Congenital Defects or After Amputation Using 3D Printing Technology

  • Anna Włodarczyk-Fligier,
  • Magdalena Polok-Rubiniec,
  • Aneta Kania,
  • Sebastian Jakubik and ,
  • Jakub Painta,
  • Justyna Ryś,
  • Jakub Wieczorek,
  • Marta Marianek,
  • Agata Ociepka and
  • Jakub Osuch
  • + 6 authors+ 1 author

19 July 2025

The research presented in this paper focuses on the utilization of 3D printing technology in the design and manufacture of a prosthetic hand, equipped with a digit replicator. The subject of this study was a young man who had undergone the amputation...

(This article belongs to the Special Issue 3D Printing Polymer Materials and Their Biomedical Applications)
  • Article
  • Open Access
30 Citations
6,184 Views
14 Pages

An In-Vitro Study to Evaluate the Effect of Denture Cleansing Agents on Color Stability of Denture Bases Fabricated Using CAD/CAM Milling, 3D-Printing and Conventional Techniques

  • Saurabh Jain,
  • Mohammed Sayed,
  • Walaa Magdy Ahmed,
  • Amjad Hussain Asiri Halawi and ,
  • Naif Mohammed Ahmed Najmi,
  • Aparna Aggarwal,
  • Shilpa Bhandi and
  • Shankargouda Patil
  • + 3 authors+ 0 author

13 August 2021

The current literature lacks substantial information about the effect of denture cleansers on the color stability of denture bases formed using Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) additive and CAD/CAM subtractive manufacturin...

(This article belongs to the Section Surface Coatings for Biomedicine and Bioengineering)
  • Article
  • Open Access
38 Citations
6,161 Views
13 Pages

Wear Behavior of Ceramic CAD/CAM Crowns and Natural Antagonists

  • Ella A. Naumova,
  • Stephan Schneider,
  • Wolfgang H. Arnold and
  • Andree Piwowarczyk

28 February 2017

Objective: Evaluation of wear behavior of computer-aided design/computer-aided manufacturing (CAD/CAM) crowns from various restorative materials and natural antagonists. Method: Full CAD/CAM crowns fabricated with nanoceramic resin (Lava Ultimate (LU...

(This article belongs to the Section Biomaterials)
  • Communication
  • Open Access
10 Citations
5,137 Views
9 Pages

Functional or Nonfunctional Cusps Preservation for Molars Restored with Indirect Composite or Glass-Ceramic Onlays: 3D FEA Study

  • Pablo Lenin Benitez Sellan,
  • Larissa Mendes Campaner,
  • João Paulo Mendes Tribst,
  • Amanda Maria de Oliveira Dal Piva and ,
  • Guilherme Schmitt de Andrade,
  • Alexandre Luiz Souto Borges,
  • Eduardo Bresciani,
  • Antonio Lanzotti and
  • Pietro Ausiello
  • + 4 authors+ 0 author

5 November 2021

Evidence regarding the effect of the onlay preparation design for different CAD/CAM restorative materials considering the preservation of cusps is lacking. Molars were 3D-modeled in four preparation designs for onlay restoration: traditional design w...

(This article belongs to the Special Issue Bioactive Polymer Composites and Their Clinical Applications)
  • Article
  • Open Access
382 Views
13 Pages

6 August 2026

Background/Objectives: The longevity of tooth-supported overdentures depends on the retentive stability of attachment systems, yet limited evidence exists on the performance of non-metallic CAD-CAM fabricated mini ball attachments. This study aimed t...

  • Article
  • Open Access
134 Views
17 Pages

3 November 2026

The paper presents the application of 3D optical scanning and numerical simulation in the development of a high-pressure die casting process for a differential transmission cover. The geometry of the existing casting was digitized using a 3D optical...

(This article belongs to the Special Issue Multi-Scale Simulation During Solidification)
  • Article
  • Open Access
6 Citations
5,818 Views
20 Pages

Digital twin technology is emerging as a core technology that models physical objects or systems in a digital space and links real-time data to accurately reflect the state and behavior of the real world. For the effective operation of such digital t...

(This article belongs to the Section Computer Science & Engineering)

of 5