92,416 Results Found

AerMet 100 exhibits excellent mechanical properties, proven in previous studies; however, defects may greatly influence the mechanical behavior during the service of the material, which serves as one of the major challenges in the wider application o...

We conducted a review to analyze the 100 most-cited studies on binge drinking (BD) in the Web of Science (WoS) database to determine their current status and the aspects that require further attention. We carried out a retrospective bibliometric anal...

Backgrounds: Liver surgery has developed progressively during the last 10 years, especially in minimally invasive approaches. Robotic surgery seemed to overcome laparoscopic limitations with 3D visualization, the increased degrees of freedom given wi...

Some advanced countries’ rapid population, economic growth, and energy consumption expansion contribute significantly to global CO₂ emissions. And while developed countries have achieved 100% universal access to electricity, mainly from non-ren...

International, national, and subnational laws and policies call for rapidly decarbonizing energy systems around the globe. This effort relies heavily on renewable electricity and calls for a transition that is: (i) flexible enough to accommodate exis...

To be able to fulfil the Paris Climate Agreement and keep global warming with reasonable confidence at a maximum of 1.5 °C above pre-industrial levels, Germany must set an end to all greenhouse gas emissions by 2030. At the core of this task is the s...

In order to provide guidance for furthering the balance of strength and toughness of AerMet 100 steel through tempering treatment, the effects of the tempering time on microstructure and mechanical properties are investigated. The microstructure evol...

Energy security analysis is a strong tool for policy makers. It allows them to formulate policies that would enhance energy systems by targeting necessary actions. In this study, the impacts of transitioning from a fossil fuels to a renewables domina...

AerMet 100 steel is a new type of double-hardened high-strength steel, which is often used as landing gear material in amphibious aircraft. In the present paper, the corrosion fatigue behavior and mechanism of AerMet 100 high-strength steel in a 3.5%...

This paper presents secondary voltage control by extracting reactive power from renewable power technologies to control load buses voltage in a power system at different operating conditions. The study is performed on a 100% renewable 14-bus system....

Improving surface selectivity and maximizing electrode surface area are critical needs for the electroreduction of nitrate. Herein, preferential (100) oriented Pt nanoflowers with an extended surface area were prepared by potentiostatic deposition on...

Aim: Social media has become an influential force in plastic surgery, shaping patient expectations, marketing strategies, and professional conduct. Despite its growing impact, the evidentiary foundation guiding digital engagement in the specialty rem...

Fossil fuel-based energy systems are mostly used for supplying energy that creates negative impacts on the environment, so in this study, the development of a 100% renewable energy system is evaluated for Pakistan for sustainable climate change. This...

To investigate Mo doping effects on the hydrogen permeation performance of Nb membranes, we study the most likely process of atomic hydrogen adsorption and diffusion on/into Mo-doped Nb (100) surface/subsurface (in the Nb₁₂Mo₄ case) via first-princip...

In the context of rapid growth in renewable energy installations and increasingly severe consumption issues, this paper designs a 100% green electricity supplied zero-carbon integrated energy station. It aims to analyze its configuration focusing on...

With the rapid development of renewable energy sources such as wind power and photovoltaics, the penetration rate of power electronic equipment represented by grid-forming (GFM) and grid-following (GFL) converters in the power system has been increas...

To study the role of MgO in the reduction of N₂O in circulating fluidized bed boilers, density functional theory was used to evaluate heterogeneous decomposition. The interference of SO₂ and CO on N₂O was considered. N₂O on MgO (100) is a two-step pr...

The 100 mV depolarization value cathodic protection (CP) criterion is widely used to protect the steel bars in atmospherically exposed concrete structures. The CP on the steel in concrete creates a secondary effect by increasing OH^- ions and decreasi...

This research assessed the transparency and quality of corporate sustainability efforts among US Fortune 100 companies using seven indicators: alignment with UN Sustainable Development Goals, use of sustainability reporting standards and programs, in...

CEPI (the Coalition for Epidemic Preparedness Innovation)’s CMC rapid response framework is developed to support accelerated vaccine development, manufacturing, and roll-out for various outbreak scenarios to achieve the 100 Days Mission. The fr...

The demand for decarbonization calls for building up a nearly 100% renewable electricity resulting in Grid-forming (GFM) capability requirements. The foregoing paradigm shifts from synchronous AC systems to converter-based systems that need to remain...

In this paper, an improved 100 CMM regenerative thermal oxidizer (RTO) is implemented for low-emission combustion. The existing RTO system is a cylindrical drum structure that cyclically introduces and discharges VOC gas into and from the rotating di...

A 100% renewable energy (RE) scenario featuring high participation in vehicle-to-grid (V2G) services was developed for the Åland islands for 2030 using the EnergyPLAN modelling tool. Hourly data was analysed to determine the roles of various en...

The low RAP content, hot mixing conditions, and the addition of a high ratio of new bitumen and aggregates result in low economic and environmental benefits for current regeneration technologies. A bio-rejuvenated additive (BRA) that can fully (100%)...

This study examines tourist trust in a government-initiated tourism brand from the perspective of the economic sustainability of the tourism industry. Its antecedents comprise traveler visit motivation, visitor experience perception, and willingness...

PURIFY-OBS-1 is an observational study evaluating the safety and efficacy of Seraph 100^® Microbind Affinity Blood Filter (Seraph 100) use for COVID-19 patients with respiratory failure admitted to the intensive care unit (ICU). The Seraph 100 is...

Indonesia has an increasing electricity demand that is mostly met with fossil fuels. Although Indonesia plans to ramp up Renewable Energy Technologies (RET), implementation has been slow. This is unfortunate, as the RET potential in Indonesia might b...

In this report, utraviolent (UV) photoionization of cyclopropylamine on silicon (100) hydride was employed to examine interfacing with three different epithelial cell types (MDA-MB 231, AGS and HEC1A). The cellular viability using this novel methodol...

The cost of energy in the Western Upper Peninsula (WUP), a rural and northern part of the state of Michigan, is among the highest in the United States. This situation has resulted in hardship for WUP residents due to exorbitant electricity bills. Whi...

Dietary recommendations to reduce the consumption of free sugars often group 100% fruit juice with other sugar-containing beverages. The objective of this study was to determine the effect of consuming 100% orange juice compared to an orange drink on...

The two-phase emission detector RED-100 with 130 kg of liquid xenon as a working medium has been exhibited at a distance of 19 m from the core of the VVER-1000/320 nuclear power reactor at the fourth power unit of the Kalinin Nuclear Plant Power in 2...

A 100% renewable energy system (RES) satisfies a user’s energy demand using only renewable energy, which is an important energy supply in China given that the government aims to realize carbon neutrality by 2060. The design and operation of 100% RESs...

Many developing countries suffer from high energy-import dependency and inadequate electrification of rural areas, which aggravates the poverty problem. In this work, Al-Tafilah in Jordan was considered as a case study, where the technical, economic,...

Renewable Energy Sources (RES) have become increasingly desirable worldwide in the fight against global climate change. The sharp decrease in costs of especially wind and solar photovoltaics (PV) have created opportunities to move from dependency on...

Background: Sprint performance is determined by a complex interaction of mechanical, neuromuscular, and technical factors. Although maximal running speed plays a key role in sprinting, fundamental movement patterns are also revealed at submaximal spe...

The main purpose of this study is to evaluate the applicability of a liquid desiccant and evaporative cooling-assisted 100% outdoor air system (LD-IDECOAS) in six typical cities in China. The six cities are located in different climatic zones in Chin...

Intense urbanization creates large cities that are functionally and administratively dependent on the surrounding regions and cities. As the boundaries of cities expand, so do the chronic stresses and sudden shocks they face. To reduce the impact of...

Conventional grain-oriented silicon steel (GO) relies on AlN/MnS-type inhibitors and long purification anneals, which increase alloy design complexity, energy consumption and cost. This study establishes a dislocation-loop-induced secondary recrystal...

This work presents a pathway for Saudi Arabia to transition from the 2015 power structure to a 100% renewable energy-based system by 2050 and investigates the benefits of integrating the power sector with the growing desalination sector. Saudi Arabia...

To promote high-value utilization of reclaimed asphalt pavement (RAP), this study developed 100% RAP warm-mix recycled asphalt mixtures using a laboratory-synthesized polymer-based warm-mix rejuvenator. The AC-13 gradation was reconstructed through R...

Intestinal dysbiosis has been linked to metabolic disorders, including insulin resistance and type 2 diabetes mellitus (T2DM). T2DM typically follows a prediabetic stage, during which insulin resistance develops. During the early stages of T2DM, its...

Computed tomography (CT) multi-detector array has been heavily utilized over the past decade. While transforming an individual’s diagnosis, the risk of developing pathogenesis as a result remains a concern. The main aim of this institutional cu...

This paper proposes a high-efficiency adaptive-on-time buck DC-DC converter (HEAOT–Buck) capable of supporting a 100% duty cycle. The converter operates over an input voltage range of 3–18 V and provides an adjustable output voltage from...

The use of low-carbon and energy-efficient paving technologies is gaining worldwide acceptance in recent years as a means to encourage commitment towards more sustainable pavement management practices. However, there still remain some technical gaps...

Mannose triflate is an established precursor for nucleophilic 2-deoxy-2-[¹⁸F]fluoro-D-glucose ([¹⁸F]FDG) production, but same-scale, stage-resolved process behavior is incompletely documented. This retrospective study combines three 100 g D-mannose c...

Driven by the 2011 nuclear disaster, Namie Town, Fukushima, is aiming to implement a standalone 100% renewable energy system by 2035 using regional resources. This study clarifies the optimal configuration of a carbon-neutral energy system, focusing...

Against the backdrop of global climate change and resource-environmental constraints, land ecological security is paramount to regional sustainable development. This study innovatively integrates the DPSIRM system framework with a CNN-LSTM hybrid neu...

Molecular diagnostic testing for viral pathogens is crucial in aquaculture. The efficient and convenient preparation of pathogenic microbial nucleic acids is the basis of molecular diagnosis. Here, we developed a simplified deoxyribonucleic acid (DNA...

Companies are under immense pressure to integrate activities that will improve society and the environment with their business objectives. Such integration is likely to introduce complexity into the firms’ activities and impact the timeliness o...

Quasi-static and high-rate tensile experiments were used to examine the strain rate sensitivity of laser-directed energy deposition (L-DED)- and additive friction stir deposition (AFSD)-formed AerMet 100 ultrahigh-strength steel-additive manufactured...