- Article
Hard carbon (HC) is one of the most promising anode materials for sodium-ion batteries (SIBs). Yet its sodiation mechanism—particularly the origin of the sloping and plateau regions in the voltage–capacity curve—remains debated. In...
Hard carbon (HC) is one of the most promising anode materials for sodium-ion batteries (SIBs). Yet its sodiation mechanism—particularly the origin of the sloping and plateau regions in the voltage–capacity curve—remains debated. In...
Die-stacking technology is expanding the space diversity of on-chip communications by leveraging through-silicon-via (TSV) integration and wafer bonding. The 3D network-on-chip (NoC), a combination of die-stacking technology and systematic on-chip co...
Zoledronic compounds are widely used as antiresorptive and antitumor agents to prevent bone loss and treat multiple myeloma; however, their pharmacokinetic limitations motivate the search for alternative delivery systems capable of improving their co...
Multilayered van der Waals heterostructures based on transition metal dichalcogenides are suitable platforms on which to study interlayer (dipolar) excitons, in which electrons and holes are localized in different layers. Interestingly, these exciton...
Uneven local electric fields and limited nucleation sites at the reaction interface can lead to the formation of hazardous lithium (Li) dendrites, posing a significant safety risk and impeding the practical utilization of Li metal anodes (LMAs). Here...
To address the common limitations of conventional dual-layer path planning methods, such as slow global convergence, delayed local obstacle avoidance response, and insufficient inter-layer integration, this paper proposes an enhanced collaborative pl...
Molybdenum disulfide (MoS2) has been used in a variety of lubrication products due to its highly tunable surface chemistry. However, the performance of MoS2-derived tribofilms falls short when compared to other commercially available antiwear additiv...
We consider the effect of the external magnetic field on the in-plane conductivity in the AA-stacked bilayer graphene system in the strong excitonic condensate regime. We include the effects of the applied inter-layer electric field and the Coulomb i...
Semiconductor heterostructures have been the backbone of developments in electronic and optoelectronic devices. One class of structures of interest is the so-called type II band alignment, in which optically excited electrons and holes relax into dif...
Shape memory polymer composites (SMPCs) have been manufactured by press moulding of carbon fibre-reinforced (CFR) prepregs with SMP interlayers. SMPC laminates have been produced with different numbers of CFR plies (i.e., 2, 4, 6, and 8) and differen...
Organic solar cells (OSCs) have become a potential energy source for indoor light harvesting in recent years as they have witnessed a record power conversion efficiency (PCE) of over 30% under indoor lights. Among various strategies, interlayer engin...
We elucidate here the determining role of Nb interlayer on mechanical properties of Ti/steel clad plate fabricated by vacuum rolling cladding (VRC) as a function of different heating temperatures. A critical analysis on the clad interface via electro...
In recent years, there has been an increasing interest in stimuli-responsive host–guest materials due to the high potential for their application in switchable devices. Light is the most convenient stimulus for operating these materials; a ligh...
Photovoltaic devices based on organic–inorganic hybrid perovskites have engaged tremendous attention due to the enormous increase in power conversion efficiency (PCE). However, defect states formed at grain boundaries and interfaces hinder the...
This paper investigates the synchronizability of multilayer directed Dutch windmill networks with the help of the master stability function method. Here, we propose three types of multilayer directed networks with different linking patterns, namely,...
A substantial contribution of the stresses that arise inside the Plasma-Facing Components (PFCs) when a heat load is applied is caused by the mismatch of the Coefficient of Thermal Expansion (CTE) between the armor, usually made of tungsten (W), and...
Charge injection and transport interlayers play a crucial role in many classes of optoelectronics, including organic and perovskite ones. Here, we demonstrate the beneficial role of carbon nanodots, both pristine and nitrogen-functionalized, as elect...
Core-interlayer-shell Fe3O4/SiO2/TiO2, CoFe2O4/SiO2/TiO2 and BaFe12O19/SiO2/TiO2 magnetic photocatalysts were obtained. A water-in-oil microemulsion system with suitable surfactants was used for functionalization of the magnetic core with silica inte...
Functionalization of the kaolinite (K) interlayer space is challenging. In this work, a new kaolinite-based nanohybridmaterial (K-NI) was successfully synthesized by grafting on the interlayer aluminol surfaces the ionic liquid, 1-(1-methylnaphthyl)-...
Roller compacted concrete (RCC) dams own a large number of horizontal construction layers, which can easily lead to weak joints among layers and generate interlayer joints with different scales to reduce the dam bearing capacity. In this study, exten...
Graphite/graphene intercalation compounds with good and improving electrical transport properties, optical properties, magnetic properties and even superconductivity are widely used in battery, capacitors and so on. Computational simulation helps wit...
We developed a bioadhesive coating based on a synthetic peptide-conjugate (AK-cyclo[RGDfC]) which contains multiples of the arginyl-glycyl-aspartic acid (RGD) amino acid sequence. Biotinylated AK-cyclo[RGDfC] is bound to a supported lipid bilayer via...
To suppress the volume expansion and thus improve the performance of antimonene as a promising anode for lithium-ion batteries, we have systematically studied the stability, structural and electronic properties of the antimonene capped with graphene...
Silicon nitride (SiNx) coatings are currently under investigation as bearing surfaces for joint implants, due to their low wear rate and the good biocompatibility of both coatings and their potential wear debris. The aim of this study was to move fur...
This study carried out modeling of the contact between a pair of antagonist teeth with/without individual mouthguards with different geometric configurations. Comparisons of the stress–strain state of teeth interacting through a multilayer mout...
Based on observations of real-world transport systems such as bus-subway systems, street-motorway networks, and rail-air transport frameworks, in which high-speed layers are typically constructed above pre-existing low-speed networks to alleviate con...
The functional valorization of waste fabrics, particularly their conversion into flexible low-cost, high-performance electrodes, holds significant promise for resource sustainability and the development of advanced energy technologies. Here, a NiB/Cu...
Correlated electronic phenomena in magic-angle twisted bilayer graphene have garnered widespread research interest in two-dimensional materials science. As a powerful multiscale framework bridging atomic-scale resolution and mesoscopic structural evo...
The paper presents the results of research aimed at verifying the possibility of creating renovation layers using HVOF (High Velocity Oxygen Fuel) technology. HVOF ceramic coatings represent a promising way to increase the efficiency, reliability, an...
Poly(p-phenylene terephthalamide) (PPTA) is a high-performance polymer that has been utilized in a range of applications. Although PPTA fibers are widely used in various composite materials, laminar structures consisting of PPTA and ultra-high-molecu...
MXenes are high-performance pseudocapacitive materials known for their excellent conductivity, large surface area and fast redox reactions occurring at the surface. Despite these advantages, their practical application is hindered by the tendency of...
Four kinds of Ca-montmorillonite with different layer charge density were used to study the effect of charge density on their hydration properties by molecular dynamics simulation and experiments. The research results of Z-density distribution of wat...
The post-fracture mechanical performance of laminated glass (LG) members is well-known to be challenging to assess due to the influence of multiple factors. Even more challenging and scarcely explored is the assessment of the behavior of broken LG el...
Van der Waals (vdW) heterostructures, typically composed of two-dimensional (2D) atomic layers, have attracted significant attention over the past few decades. Their performance is closely dependent on their composition and interlayer interactions. I...
Icing represents a significant hazard to the flight safety of unmanned aerial vehicles (UAVs), particularly affecting critical aerodynamic surfaces such as air intakes, wings, and empennages. While conventional adhesive electrothermal de-icing system...
To improve the structural design rationality of cement concrete bridge deck pavement systems and reduce diseases such as interlayer displacement and rutting in the early stage of bridge deck use, this paper studies the influence and law of the coupli...
Conjugated polyelectrolytes are commonly employed as interlayers to modify organic solar cell (OSC) electrode work functions but their use as an electron donor in water-processed OSC active layers has barely been investigated. Here, we demonstrate th...
In order to expand the range of pot materials for induction cookers, a kind of sandwich structural composite ceramic panel that consists of an Al2O3 ceramic substrate, magnetic heating interlayer, and ZrO2 ceramic substrate was developed by combining...
To explore the effect of spacer structure on the adsorption capability of organo-vermiculites (organo-Vts), a series of aza-containing gemini surfactants (5N, 7N and 8N) are applied to modify Na-vermiculite (Na-Vt). Large interlayer spacing, strong b...
Multilayer networks are widely adopted as flexible models for characterizing complex systems with diverse interconnection types. Nevertheless, mainstream existing visualization tools are predominantly designed for single-layer network scenarios, and...
Waterborne polyurethane (WPU) and waterborne poly(urethane-urea) (WPUU) dispersions allow safer and more sustainable manufacturing of rechargeable batteries via water-based processing, while offering tunable adhesion and segmented-domain mechanics. B...
The direct thermal conversion of thiourea on fluorine-doped tin oxide (FTO) substrates is widely used to fabricate sulfur-doped carbon nitride (S-CN) photoelectrodes; however, substrate-induced effects often contribute to photoelectrochemical respons...
Water interacting with clay minerals—such as kaolinite, montmorillonite, and pyrophyllite—fundamentally governs their geotechnical and environmental functions, thereby influencing parameters such as retention, transport, and stability. Un...
Background: Multilayer networks have been used to identify abnormal dynamic reconfiguration in bipolar disorder (BD). However, these studies ignore the differences in information interactions between adjacent layers when constructing multilayer netwo...
The buffer material that makes up the geological disposal system of high-level waste swells by contact with groundwater and seals space with rock mass and fractures in rock mass. The buffer material has a function of mechanical buffer with rock press...
We present a comprehensive study of the structural and electronic properties of a graphene/phosphorene (G/P) heterostructure in the framework of density functional theory, including van der Waals interaction in the exchange–correlation function...
The structural changes along the c axis, of the Ba-exchanged montmorillonite (Swy-2-Ba), under variable relative humidity (% RH), is investigated. In this regard, the arrangement, amount and position of both exchangeable cation and the water molecule...
The interfacial friction performances of graphene covered and hydrogen-terminated diamond surfaces were investigated comparatively by first-principles calculations within density functional theory (DFT). Both systems exhibit similar excellent lubrica...
Tungsten is the prime candidate material for plasma facing components of future fusion devices. Plasma spraying, with its ability to coat large areas, including non-planar surfaces, with a significant thickness, is a prospective fabrication technolog...
In many layer-structured materials, constituent layers are bound through van der Waals (vdW) interactions. However, hydrogen bonding is another type of weak interaction which can contribute to the formation of multi-layered materials. In this work, w...
of 11