Skip to Content
CoatingsCoatings
  • Article
  • Open Access

20 July 2026

20 Pages

Computational Study on the Na Storage Mechanism in Carbon Anodes Based on Bilayer Graphene Nanoribbons with Zigzag and Armchair Edges

,
,
,
,
and
1
School of Metallurgy and Materials Engineering, Liaoning Institute of Science and Technology, Benxi 117004, China
2
Key Laboratory of Optimization and Application of Low-Grade Non-Associated Iron Ore of Liaoning, Liaoning Institute of Science and Technology, Benxi 117004, China
3
College of Materials Science and Engineering, Liaoning Technical University, Fuxin 123000, China
4
School of Metallurgy, Northeastern University, Shenyang 110819, China

Abstract

Hard carbon (HC) is one of the most promising anode materials for sodium-ion batteries (SIBs). Yet its sodiation mechanism—particularly the origin of the sloping and plateau regions in the voltage–capacity curve—remains debated. In this work, first-principles density functional theory (DFT) calculations are employed to systematically investigate the sodium storage mechanism at the edges and within the interlayer ultramicropores of bilayer graphene nanoribbons (BGNRs) with zigzag (BGNRs-Z) and armchair (BGNRs-A) terminations. A series of edge models, including hydrogenated, dehydrogenated (dangling bond), monovacancy (MV), and divacancy (DV) defects, were constructed to elucidate the effects of edge type and defect species on Na adsorption and intercalation. Our results demonstrate that Na ions preferentially adsorb at the edges rather than in the interior interlayer regions. The zigzag edge exhibits stronger binding affinity toward Na than the armchair edge. Progressive Na intercalation gradually opens the edge interlayer spacing. It reduces the interlayer angle toward a parallel configuration and accompanies a stacking transition from AB to AA at higher Na concentrations. Edge dangling bonds significantly enhance Na binding and drive the initial separation of edge carbon layers, whereas surface MV and DV defects contribute to Na adsorption at lower binding strengths. The calculated voltage–capacity relationships reveal that the first sloping region (>1.0 V) is primarily associated with Na adsorption at zigzag and defective edges, the second sloping region (0.1–1.0 V) can be rationalized by combined surface defect adsorption and interlayer intercalation, and the low-voltage plateau (<0.1 V) is thermodynamically linked to Na filling of narrow slit pores with optimized interlayer distances (~4.0 Å for zigzag and ~4.3–5.8 Å for armchair edges). These findings establish a direct structure–property correlation between carbon microstructure (edge type, defect architecture, and pore geometry) and the electrochemical voltage profile, offering atomic-level insights for the rational design of high-performance carbon-based anodes for SIBs.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.