It is shown that the termination of the channeling of the fundamental radiation mode in the waveguide can be observed upon heating of an optical integrated circuit based on proton exchange channel waveguides formed in a lithium niobate single crystal...
Strong thermo-optic effect of polymers is useful for fabricating tunable phase-delay devices with low power consumption and wide tuning range. However, if the temperature change is increased to extend the tuning range, an attenuation of the guided li...
Substituent effect on optical gas sensing performance in porphyrin-based optical waveguide detection system was studied by molecular dynamics simulation (MDS), absorption/emission spectrum analysis, and optical waveguide (OWG) detection. The affiniti...
A high sensitivity fiber-optic sensor based on self-imaging effect in a hollow-core capillary waveguide (HCCW) is presented for sensing applications. The sensor is composed of a section of HCCW fusion spliced between single mode fibers (SMFs). The se...
Augmented reality (AR) technology blends digital content with the real world to create immersive experiences. Diffractive waveguides, a key AR component, are popular because they balance weight, size, image quality, and ease of production. However, t...
We proposed an active differential intensity (DI) fiber coupled plasmon waveguide resonance (CPWR) sensor based on the mode competition effect in the C-band, aiming to enhance the sensitivity. The sensing head is a fiber probe with a sensing layer of...
Traversal time in the tunneling effect for ultrasonic waves in tapered waveguides is derived considering its analogy with quantum and electromagnetic wave tunneling. If, as traversal time, the so-called phase time is considered, the ultrasonic wave p...
Fs-laser induced element redistribution (FLIER) has been a subject of intensive research in recent years. Its application to various types of glasses has already resulted in the production of efficient optical waveguides, tappers, amplifiers and lase...
This work is devoted to the study of the pyroelectric effect on the properties of optical waveguides formed in a lithium niobate crystal by proton exchange. In the present work, we studied the cessation effect of the radiation channeling during therm...
In J. Phys. Soc. Jpn. 83, 034404 (2014), we designed a scheme of waveguide arrays with long-range linear coupling effects and studied the bright solitons in this system. In this paper, we further study the dynamics of dark and grey solitons in such w...
Photonic integrated circuits (PIC) find applications in the fields of microwaves, telecoms and sensing. Generally, PICs are fabricated on a base of isotropic materials such as SOI, Si3N4, etc. However, for some applications, anisotropic substrates su...
In this work, we successfully developed a fluorinated cross-linked polymer Bragg waveguide grating-based optical biosensor to detect effective drug concentrations of ginkgolide A for the inhibition of pulmonary microvascular endothelial cell (PMVEC)...
Rock burst is a common hazard during tunnel excavation in high-stress and hard rock strata. Microwave-assisted breaking has a great potential application in hard rock tunnel excavation, reducing the possibility of rock burst, and how to reasonably ma...
Electromagnetic leakage through ventilation interfaces is a critical challenge in photonic instrumentation, where laser controllers and photoelectric readout circuits are highly sensitive to external interference. In photonic instruments, enclosure l...
Attenuation from fish can reduce the intensity of acoustic signals and significantly decrease detection range for long-range passive sensing of manmade vehicles, geophysical phenomena, and vocalizing marine life. The effect of attenuation from herrin...
Analysis of trends in the development of silicon photonics shows the high efficiency regarding the creation of optical sensors. The concept of bimodal sensors, which suggests moving away from the usual paradigm based only on single-mode waveguides an...
A graphene plasmon waveguide composed of silicon grating substrate and a silica separator is proposed to generate the slow-light effect. A bias voltage is applied to tune the optical conductivity of graphene. The tunability of the slow-light working...
This article presents the results of the study of the influence of the most significant parameters of the side wall roughness of an ultra-thin silicon nitride lightguide layer of multimode integrated optical waveguides with widths of 3 and 8 microns....
This paper reports a magnetically tunable U-band metallic waveguide isolator based on the ferromagnetic resonance (FMR) absorption effect. The device features a BaFe12O19 (BaM) single-crystal array integrated into a rectangular waveguide. By leveragi...
To address the effects of surface roughness on wave propagation in the microwave and millimeter-wave bands, this paper studies electromagnetic wave propagation and focuses on the propagation loss within an inner environment featuring surface roughnes...
Photothermal heaters are important devices for optical switches and memories based on the thermo-optic/magneto-optic effect and phase change materials. We demonstrated photothermal heating in Si plasmonic waveguides loaded with Co thin films by measu...
Optical logic gates have been proposed and demonstrated on a function programmable waveguide engine constructed using buried silicon nitride waveguides in polymer and a set of thermal electrodes. The device can perform logic AND or OR operations for...
This paper investigates the wavelength-dependent sensitivity of a ridge waveguide based on a silicon nitride (Si3N4) platform, combining numerical analysis and experimental validation. In the first part, the modal characteristics of a Si3N4 ridge wav...
Polarization mode dispersion can introduce quantum decoherence in polarization encoded information, limiting the range of quantum communications protocols. Therefore, strategies to nullify the effect would reduce quantum decoherence and potentially i...
This work explicitly demonstrates a semi-analytical effective index approximation (EIA) approach for the description of the propagation properties of rib and ridge waveguides. By using the example of waveguides realized on a low-cost silica-titania (...
Terahertz radiation patterns can be registered using various detectors; however, in most cases, the scanning resolution is limited. Thus, we propose an alternative method for the detailed scanning of terahertz light field distributions after passing...
The theory of the beam splitter (BS) in quantum optics is well developed and based on fairly simple mathematical and physical foundations. This theory has been developed for any type of BS and is based on the constancy of the reflection coefficients...
The quantum Mpemba effect refers to the counterintuitive phenomenon in which a system initially farther from equilibrium relaxes faster than one prepared closer to it. Several mechanisms have been identified in open quantum systems to explain this be...
Advancements in electronic device technology have led to an exponential growth in demand for more efficient and versatile transistors. In this context, organic field-effect transistors (OFETs) have emerged as a promising alternative due to their uniq...
A Love wave-based sensing chip incorporating a supramolecular cryptophane A (CrypA) thin film was proposed for methane gas sensing in this work. The waveguide effect in the structure of SiO2/36° YX LiTaO3 will confine the acoustic wave energy in...
We propose a low cost polymeric optical waveguides-based optical CDMA encoder and decoder modules. The structures of the optical CDMA encoder and decoder modules are presented. The performance of the optical CDMA encoder and decoder modules is simula...
Low-dimensional lead-free metal halide perovskites have demonstrated excellent performance in indirect X-ray detectors; however, the imaging resolution remains limited due to the lack of effective scintillation waveguiding. In this work, array-struct...
We studied photonic electric-field sensors using a 1 × 2 YBB-MZI modulator composed of two complementary outputs and a 3 dB directional coupler based on the electro-optic effect and titanium diffused lithium–niobate optical waveguides. Th...
In this paper, the noninvasive and real-time plasmon waveguide resonance (PWR) thermometry is reported theoretically and demonstrated experimentally. Owing to the enhanced evanescent field and thermal shield effect of its dielectric layer, a PWR the...
The partial substitution of non-renewable materials in cementitious composites with eco-friendly materials is promising not only in terms of cost reduction, but also in improving the composites’ shielding properties. The water and carbon conten...
In this paper, we propose a generalized procedure for the design of integrated Vernier devices for high performance chemical and biochemical sensing. In particular, we demonstrate the accurate control of the most critical design and fabrication param...
A novel, rectangle-based, porous-core photonic crystal fiber (PCF) has been modeled for the efficient propagation of a THz wave. The performance of the anticipated model has been assessed using the finite element method (FEM) in the range of 0.5&ndas...
Evolution of depth profiles of the refractive index in Y3Al5O12 (YAG) crystals were studied under 200 MeV 136Xe14+ ion irradiation, since the index can be related with the stress change and/or the defect formation by the irradiation. Using the prism-...
A theoretical study of the electromagnetic propagation in a complex medium suspended multilayer coplanar waveguide (CPW) is presented. The study is based on the generalized exponential matrix technique (GEMT) combined with Galerkin’s spectral method...
As the exponential growth in advanced compute workloads drives intra-datacenter interconnects to ever increasing bitrates, optical networking equipment has risen to the challenge by shifting from NRZ signaling to bandwidth efficient modulation method...
Optofluidic devices are capable of detecting single molecules, but greater sensitivity and specificity is desired through hydrodynamic focusing (HDF). Three-dimensional (3D) hydrodynamic focusing was implemented in 10-μm scale microchannel cross-s...
This study investigates radio-frequency signal propagation in underground metro tunnels with a focus on distributed antenna system (DAS) deployment. Deterministic simulations were performed using Altair WinProp 2024.1 (ProMan) with a 3D ray-tracing e...
The resonant wave modes in monomodal and multimodal planar Surface Plasmon Resonance (SPR) sensors and their response to a bidimensional array of gold nanoparticles (AuNPs) are analyzed both theoretically and experimentally, to investigate the parame...
Two types of configurations are theoretically proposed to achieve high responsivity polarization-insensitive waveguide Schottky photodetectors, i.e., a dual-layer structure for 1.55 µm and a single-layer structure for 2 µm wavelength band...
Electromagnetic interference (EMI) shielding is essential in modern electronics, telecommunications, and aerospace systems. Graphite-based materials are promising shielding candidates due to their tunable electrical conductivity, low density, corrosi...
The propagation of acoustic emission (AE) signal in waveguide is quite important for AE-based prediction of dynamic disasters in coal rocks. In this study, based on some relevant theories in wave mechanics, the elastic mechanical model of one-dimensi...
A novel Energy Selective Filter (ESF) mounted in waveguide is presented based on nonlinear element, which is sensitive to the power intensity of incident wave achieving frequency selection as well as energy selection. The proposed ESF consists of thr...
The present work analyzes light propagation in asymmetric waveguides with dielectric cores and anisotropic multilayer claddings based on nanometric planar hyperbolic metamaterials. A generalized definition of asymmetry, incorporating both structural...
In this paper we demonstrate a new approach to the measurement of dispersion of light reflected in integrated optical devices. The approach utilizes the fact that light reflected from the end facet of an integrated waveguide will interfere with light...
Gratings with complex multilayer strips are studied under inclined incident light. Great interest in these gratings is due to applications as input/output tools for waveguides and as subwavelength metafilms. The structured strips introduce anisotropy...
of 18