- Article
The dynamic characteristics of shale gas wells are complexly affected by the gas–water two-phase flow. Based on the special flow mechanism of gas–water two-phase flow in shale gas reservoir, this paper establishes a mathematical model for...
The dynamic characteristics of shale gas wells are complexly affected by the gas–water two-phase flow. Based on the special flow mechanism of gas–water two-phase flow in shale gas reservoir, this paper establishes a mathematical model for...
Surfactants significantly influence the flow patterns of gas-liquid two-phase flows. Understanding the behavior of multiphase flows in the presence of surfactants is crucial for optimizing hydrate transport in pipelines. This study presents experimen...
The main objective of the study is to propose a technical solution integrated into the pipeline for the transition of the flow regime from slug to bubbly two-phase flow. The object of research is isothermal two-phase gas–Newtonian-liquid flow i...
In this paper we perform an analysis of the conductance probes used in two-phase flow applications especially for two-phase flow tomography of annular flow, to measure the waves produced in the interface with different boundary conditions without per...
In this paper, the gas–liquid two-phase flow within a Tesla valve under zero-gravity conditions is numerically studied. Based on the VOF model and the inlet two-phase separation method, the forward and reverse flow patterns and pressure drop ch...
The influence of wettability on the permeability performance of water–oil two-phase flow has attracted increasing attention. Dispersed flow and stratified flow are two flow regimes for water–oil two-phase flow in capillary fractures. The...
For self-entrainment venturi nozzles, the effects of nozzle shapes and operating conditions on the water–air two-phase flow pattern, and the characteristics of the air entrainment rate have been investigated. A rectangular venturi nozzle with width a...
Driven by the large-scale deployment of renewable electricity, water electrolysis has emerged as a leading pathway for high-efficiency hydrogen production. Under practical operating conditions, gas evolution and gas–liquid two-phase flow inside...
A capacitance measurement system is developed for the measurement of gas-liquid two-phase flow in glass micro-pipes with inner diameters of 3.96, 2.65 and 1.56 mm, respectively. As a typical flow regime in a micro-pipe two-phase flow system, slug flo...
Gas–liquid two-phase flow instability is a key issue affecting the safety and efficiency of industrial systems, and the accurate characterization of its multiscale dynamic characteristics remains a challenge. This study proposes a novel approac...
Two-phase flow with phase change in microstructure or nanostructure is an important issue in many fronts and critical applications nowadays, but with a lack of comprehensive understanding of the mechanism. This paper numerically investigates the tran...
In order to study the internal flow state and wear law of a bulb cross-flow unit based on the particle non-uniform phase model in the Euler–Euler method, the solid-liquid two-phase flow condition of the hydraulic turbine under different solid-p...
An in-depth analysis of the two-phase flow in a hydraulic braking pipeline can reveal its evolution process pertinent for designing and maintaining the hydraulic system. In this study, a high-speed camera examined the two-phase flow pattern and bubbl...
In order to improve the flow measurement accuracy of oil-water two-phase flow at low flow rate, this paper presents a plug-in conductance sensor array (PICSA) for the measurement of water holdup and cross-correlation velocity. Due to the existence of...
Due to the complex nonlinearity characteristics, analytical modeling of compressible flow in inclined transmission lines remains a challenge. This paper proposes an analytical model for one-dimensional flow of a two-phase gas-liquid fluid in inclined...
The theory of two-phase immiscible flow in porous media is based on the extension of single phase models through the concept of relative permeabilities. It mimics Darcy’s law for a fixed average saturation through the introduction of saturation...
The parameters of gas-liquid two-phase flow bubbles in field coalbed methane (CBM) wells are of great significance for analyzing coalbed methane output, judging faults in CBM wells, and developing gas drainage and extraction processes, which stimulat...
The measurement of wellbore annulus gas–liquid two-phase flow in CBM (coalbed methane) wells is of great significance for reasonably developing gas drainage and extraction processes, estimating CBM output, judging the operating conditions of CBM well...
In the process of production logging interpretation, a water cut is one of the key factors to obtain the oil phase content in the oil well. In order to measure the water cut of the horizontal oil–water two-phase flow with low yield, the respons...
The aim of the present work is to account for polydisperse effects in a two-phase flow with a simple and fast method. Polydisperse two-phase flows arise in numerous applications. Fire sprinkler systems are relevant examples as they release clouds of...
This study focusses on investigating the effect of flow orientation on global and local two-phase flow parameters under two-phase flow conditions. Flow visualization, pressure measurement, and conductivity probe measurements are performed in a test f...
Mathematical modeling is the most important tool for constructing theories of different kinds of two-phase flows. This review is devoted to the analysis of the introduction of mathematical modeling to two-phase flows, where solid particles mainly ser...
Airlift pumps can be used in the aquaculture industry to provide aeration while concurrently moving water utilizing the dynamics of two-phase flow in the pump riser. The oxygen mass transfer that occurs from the injected compressed air to the water i...
A flow pattern identification method combining ultrasonic transmission attenuation with an ultrasonic reflection echo is proposed for oil–water two-phase flow in horizontal pipelines. Based on the finite element method, two-dimensional geometri...
Accurate measurement of two-phase flow quantities is essential for managing production in many industries. However, the inherent complexity of two-phase flow often makes estimating these quantities difficult, necessitating the development of reliable...
The characteristics of two-phase flow in heterogeneous shale porous structures are of critical importance for oil and gas extraction and for evaluating the efficiency of underground resource recovery and carbon sequestration. However, although non-is...
In this paper, we investigate the accuracy and robustness of three classes of methods for solving two-phase incompressible flows on a staggered grid. Here, the unsteady two-phase flow equations are simulated by finite volumes and penalty methods usin...
The drive to increase the efficiency of processes based on two-phase flow demands the better precision and selection of boundary conditions in the process’ control. The two-phase flow pattern affects the phenomena of momentum, heat, and mass transfer...
The variation in the two-phase flow parameters in a cylindrical body of new geometry and principle of operation are considered for a device for separating solids from air flow, solving the problem of numerical flow modeling. The aim of this research...
This work presents an experimental study of the possibility of intensifying in microfluidic heat exchangers (MFHE) by creating a two-phase segmented flow (gas–liquid). Measurements of convective heat transfer were carried out using an MFHE, consistin...
The liquid–liquid two-phase flow and size prediction of slug droplets in flow-focusing microchannels with different downstream orifice sizes were investigated experimentally. Aqueous solution of 50%-glycerol and mineral oil with 4 wt.% surfacta...
In industrial production and water resource management involving fluid flows, two-phase flow measurement in complex environments has always been a research hotspot. In this study, a broadband detection device (40–110 MHz) suitable for two-phase...
Oil-water two-phase flow commonly occurs in the process of crude oil electric dehydration. Here, through dynamic changes in the water content and conductivity of oil-water two-phase flow in the process of electric dehydration, the influence of water...
This review article highlights the critical impact of surface roughness in modifying the structure of two-phase flow within mini- and microchannels, particularly in processes such as boiling and condensation. Channel surface roughness enhances flow r...
In oil reservoirs, if oil mainly has wettability in the solid phase, such as in carbonate reservoirs, the medium is oil-wetted. For oil-wetted porous media containing an oil and water two-phase flow, there are electric double layers at both the oil&n...
During gas production, the wellbore operates under high temperature and high pressure conditions, where gas–liquid two-phase flow is commonly present. Thus, it is important to understand the holdup of different flow patterns of gas–liquid...
Two-phase flow in non-circular cross-section flow channels such as micro-heat sinks and micro-channel heat exchangers has received extensive attention due to its heat-enhancing properties. In this paper, under the boundary of constant heat flux, an e...
We study a high-viscosity two-phase flow through an analysis of the corresponding pressure signals. In particular, we investigate the flow of a glycerin–air mixture moving through a horizontal pipeline with a U-section installed midway along th...
To study the effects of liquid properties and interface parameters on gas–liquid two-phase flow in porous media. The volume flow model of gas–liquid two-phase flow in porous media was established, and the interface of the two-phase flow w...
There are inevitable multiphase flow problems in the process of subsea oil-gas acquisition and transportation, of which the two-phase flow involving gas and liquid is given much attention. The performance of pipelines and equipment in subsea systems...
Two-phase annular flow in vertical pipes is one of the most common and important flow regimes in fluid mechanics, particularly in the field of building drainage systems where discharges to the vertical pipe are random and the flow is unsteady. With t...
Erosion is one of the important reasons for the thickness decrease and perforation of the pipe walls. Understanding the gas–solid two-phase flow pipe erosion mechanism is the basis for monitoring pipe erosion. According to the structural charac...
The electromagnetic flowmeter is usually used for single-phase fluid parameter measurement. When the measured fluid is gas-liquid two-phase flow, the geometry of the sensor measurement space will change with the movement of the gas, which will cause...
The present study numerically investigated the deformation of the free-surface of two-phase fluid flow in a tank which is considered as a simplified blast furnace hearth. Actually, the fluids existing in a blast furnace hearth are gas, slag and hot m...
Two-phase flow microfluidics is emerging as a popular technology for a wide range of applications involving high throughput such as encapsulation, chemical synthesis and biochemical assays. Within this platform, the formation and merging of droplets...
We develop a self-consistent physical model of bubbles in a gas solid two-phase flow. Using the Peng-Robonson state equation and a detailed specific heat ratio equation of bubbles, we obtain the kinetic equations of the bubbles on the basis of the Er...
The oil and gas industry consistently embraces innovative technologies due to the significant expenses associated with hydrocarbon transportation, pipeline corrosion issues, and the necessity to gain a deeper understanding of two-phase flow character...
Based on a laser diode, a 12 × 6 photodiode array sensor, and machine learning techniques, a new void fraction measurement method for gas-liquid two-phase flow in small channels is proposed. To overcome the influence of flow pattern on the void fract...
The application prospect of a flow focusing/blurring nozzle is broad but research on gas-liquid flow inside the nozzle is not comprehensive. The gas-liquid mixing inside the nozzle is difficult to study by visualization experiment, so this paper prop...
The two-phase flow in a microchannel consists of liquid–liquid and gas–liquid material components. The automatic recognition of flow patterns using deep learning approaches has been emerging. This study aimed to improve the recognition accuracy of fl...
of 82